Ask HN: What are some terminal tricks you wish you knew sooner?
35 comments
Using the caret (^) character to correct mistakes.
Imagine you write something like this:
# moutn -o ro -o remount /dev/hda0 /
Arg! I should have written mount, not moutn!
Easy fix:
# ^moutn^mount
I find it better than editing the last line (with cursor). It even works at boot and without 'doskey-like' arrow history.
Imagine you write something like this:
# moutn -o ro -o remount /dev/hda0 /
Arg! I should have written mount, not moutn!
Easy fix:
# ^moutn^mount
I find it better than editing the last line (with cursor). It even works at boot and without 'doskey-like' arrow history.
byobu and tmux are god-tier
vim: use :!some_shell_command --with_arguments to run a shell command from within vim quickly
also :set hlsearch to allow search highlighting, and use :noh to disable the current highlight once you no longer need the text to be a different color
tmux: Prefix-[ to scroll up console text. use / to search down, and ? to search up (just like in vim)
tmux: Prefix-z to zoom current pane to full size of window
zsh: vi-mode plugin to quickly use vim shortcuts on terminal input text, history-substring-search plugin to quickly remember what finicky command I was using earlier
also shells in general: ctrl-s to pause text (eg if you want to pause log spam), ctrl-q to resume
ssh -XC for compressed x11 forwarding, to speed up x11 responsiveness
on remote server: python2 -m SimpleHTTPServer 8080 --bind localhost to quickly start a simple file/http server from the current directory that is NOT internet accessible (ie nobody steals your shit)
then on local computer: ssh -L 8080:localhost:8080 to tunnel to remote server's localhost server. then just type in localhost:8080 in firefox to access remote server's files
vim: use :!some_shell_command --with_arguments to run a shell command from within vim quickly
also :set hlsearch to allow search highlighting, and use :noh to disable the current highlight once you no longer need the text to be a different color
tmux: Prefix-[ to scroll up console text. use / to search down, and ? to search up (just like in vim)
tmux: Prefix-z to zoom current pane to full size of window
zsh: vi-mode plugin to quickly use vim shortcuts on terminal input text, history-substring-search plugin to quickly remember what finicky command I was using earlier
also shells in general: ctrl-s to pause text (eg if you want to pause log spam), ctrl-q to resume
ssh -XC for compressed x11 forwarding, to speed up x11 responsiveness
on remote server: python2 -m SimpleHTTPServer 8080 --bind localhost to quickly start a simple file/http server from the current directory that is NOT internet accessible (ie nobody steals your shit)
then on local computer: ssh -L 8080:localhost:8080 to tunnel to remote server's localhost server. then just type in localhost:8080 in firefox to access remote server's files
vim: use :%!cmd to pipe the current buffer into a command, and replace the buffer with the output from the cmd
vim: use :w !cmd to pipe the current buffer into a command but display the output from the cmd to screen and discard it afterwards
vim: use :r !cmd to read the output from the command and insert it into the current buffer
All of the :! and :r and :w commands that deal with a shell can also be passed the filename for the current buffer with %, eg:
":r !md5sum %" will execute md5sum with the filename of the current file (if it is unsaved, it will use the on-disk version, obviously) then pull the output checksum into the current buffer at the cursor position
vim: use :w !cmd to pipe the current buffer into a command but display the output from the cmd to screen and discard it afterwards
vim: use :r !cmd to read the output from the command and insert it into the current buffer
All of the :! and :r and :w commands that deal with a shell can also be passed the filename for the current buffer with %, eg:
":r !md5sum %" will execute md5sum with the filename of the current file (if it is unsaved, it will use the on-disk version, obviously) then pull the output checksum into the current buffer at the cursor position
Emacs equivalents are (by default) mapped to M-! and M-| with/without prefix arguments (so C-u / M-<num> etc)
great list
If your SSH session gets locked, you can kill the session without killing the terminal window by pressing Enter, ~, . (period)
Pretty sure these count:
ctrl+r (reverse search) on steroids: fzf (https://github.com/junegunn/fzf)
put a symlink to my dot files to a dropbox folder (always backed up .bash_profile or whatnot)
ssh tunnel to expose a port from a remote server on my computer: ssh -L 8500:localhost:8500 $remotehost
expose a port on my machine to the internet (demos and such): https://ngrok.com/
git bash prompt and git completion: know at a glance the branch I'm on and if there is un-staged/un-committed code. Allow tab complete for remotes and branch names. Lots of options here.
autojump (https://github.com/wting/autojump): `j foo` will jump directories to my /whatever/foo directory. Better than popd and pushd.
And before I had it baked into my prompt: `echo $?` to show the exit code of my last command.
ctrl+r (reverse search) on steroids: fzf (https://github.com/junegunn/fzf)
put a symlink to my dot files to a dropbox folder (always backed up .bash_profile or whatnot)
ssh tunnel to expose a port from a remote server on my computer: ssh -L 8500:localhost:8500 $remotehost
expose a port on my machine to the internet (demos and such): https://ngrok.com/
git bash prompt and git completion: know at a glance the branch I'm on and if there is un-staged/un-committed code. Allow tab complete for remotes and branch names. Lots of options here.
autojump (https://github.com/wting/autojump): `j foo` will jump directories to my /whatever/foo directory. Better than popd and pushd.
And before I had it baked into my prompt: `echo $?` to show the exit code of my last command.
ctrl+r for reverse searching of previous command
add a "# tags" at any commands end to use above for future.
so lets say you have a ssh into multiple servers
$ ssh -Uasfd host1 # server1
$ ssh -Uaiouhqe host2 # server2
then later, ctrl+r -> and type ver1
add a "# tags" at any commands end to use above for future.
so lets say you have a ssh into multiple servers
$ ssh -Uasfd host1 # server1
$ ssh -Uaiouhqe host2 # server2
then later, ctrl+r -> and type ver1
$ mv file.text !#:1:r.txt
evaluates to:
$ mv file.text file.txt
(colon separated)
!# means this command
1 is the position of the argument to be modified
r means strip extension
1. for vim - https://laymanclass.com/vim-essential-setup-to-boost-your-pr...
2. autojump
3. solarized theme
4. zsh and antigen(particularly https://github.com/desyncr/auto-ls and https://github.com/psprint/zsh-navigation-tools)
2. autojump
3. solarized theme
4. zsh and antigen(particularly https://github.com/desyncr/auto-ls and https://github.com/psprint/zsh-navigation-tools)
sudo !! to run the previous command as sudo (so useful when you forgot to sudo a long command)
silly tip: alias fucking=sudo
$ rm file
> denied
$ fucking rm file $ rm file
> denied
$ fucking !!
Also `<cmd> !$` to run a new command with the same argument as the previous command.
Do you mean cmd shift t? The d exits the terminal, which is the opposite of what I assume you meant. T for Terminal, and D for Die.
Also in .vimrc I add: set noswapfile, set nobackup, and set nowb
These were probably useful when terminal sessions were conducted over flaky modem connections. I use Raspberry Pis a lot, so I'd rather not speed up the SSD card's inevitable failure.
Also in .vimrc I add: set noswapfile, set nobackup, and set nowb
These were probably useful when terminal sessions were conducted over flaky modem connections. I use Raspberry Pis a lot, so I'd rather not speed up the SSD card's inevitable failure.
So, your vi never crashes? Your ssh session never abruptly terminates?
I understand that you don’t want to further shorten the lifespan of your raspberry pi MicroSD card life, but maybe you should just buy better cards with a longer life?
Or maybe don’t work directly on the raspberry pi all the time, and only scp or rsync the files over there when you’re done developing stuff?
Do you make /tmp unwritable by all processes, too? What about /var/tmp?
Any other standard safety measures you always turn off that you want to share with us?
I understand that you don’t want to further shorten the lifespan of your raspberry pi MicroSD card life, but maybe you should just buy better cards with a longer life?
Or maybe don’t work directly on the raspberry pi all the time, and only scp or rsync the files over there when you’re done developing stuff?
Do you make /tmp unwritable by all processes, too? What about /var/tmp?
Any other standard safety measures you always turn off that you want to share with us?
fd is a simple, fast and user-friendly alternative to find. Install from https://github.com/sharkdp/fd/. Example: to find all files with .md extension in current directory : fd -e md
Ctrl-z to suspend a program, jobs to view the list of suspended programs and fg to resume a program.
They are the terminal equivalent of iconising a window. You can do some form of multitasking without screen/tmux/byobu
They are the terminal equivalent of iconising a window. You can do some form of multitasking without screen/tmux/byobu
Search in bash history -- CRTL+R (many people also bind this to other keys)
ctrl-r to history search commands
ctrl-a to go to begining of line, ctrl-e to go to end of line, ctrl-u to delete line
oh-my-zsh to display nice contextual info on git, navigate more easily etc.
If you have commands you use regularly (unit test, building, git, etc.), keep a tab for each and create a profile so that it goes directly in the folder you need, and can have a different color.
ctrl-a to go to begining of line, ctrl-e to go to end of line, ctrl-u to delete line
oh-my-zsh to display nice contextual info on git, navigate more easily etc.
If you have commands you use regularly (unit test, building, git, etc.), keep a tab for each and create a profile so that it goes directly in the folder you need, and can have a different color.
The CTRL-U was one I just recently learned and it has been surprisingly helpful.
use less for safe read-only mode and to utilize vim commands still
esc-b to jump back a word on the terminal
esc-f to jump forward a word on the terminal
nerdcommenter (my favorite vim plugin)
git-gutter (my 2nd favorite vim plugin)
!-2 (repeats 2nd to last command)
practice! https://www.shortcutfoo.com/app/dojos/vim
esc-b to jump back a word on the terminal
esc-f to jump forward a word on the terminal
nerdcommenter (my favorite vim plugin)
git-gutter (my 2nd favorite vim plugin)
!-2 (repeats 2nd to last command)
practice! https://www.shortcutfoo.com/app/dojos/vim
history
I didn't know that command even exists. You can just use it in pipe with grep/sed/... to look for specific commands used in servers you do not directly manage often (Eg last time I used them I was looking for all the docker commands in a server to understand how to startup the correct containers and in which order)
I didn't know that command even exists. You can just use it in pipe with grep/sed/... to look for specific commands used in servers you do not directly manage often (Eg last time I used them I was looking for all the docker commands in a server to understand how to startup the correct containers and in which order)
fc ("fix command") opens an editor with your last command and executes it when you leave the editor. fc -l lists your latest commands, fc -ln does so without line numbers. Useful if you want to write a script (fc -ln > myscript.sh).
- CMD + A to go to front of current line.
- CMD + E to go to end of current line.
- `sudo !!` to run last command with `sudo`
- CMD + E to go to end of current line.
- `sudo !!` to run last command with `sudo`
Slight generalization of the first two: many emacs keybindings work in bash.
Slight generalisation: many of the emacs keybindings work with commands whose command interpreter is built using the gnu readline library (bash is one of those).
Also, iirc the readine library cod also be switched to vin-like keybinding.
Also, a nice surprise thst i found in macOS is that come keybindings like C-a and C-e work in textboxes in macOS.
Also, iirc the readine library cod also be switched to vin-like keybinding.
Also, a nice surprise thst i found in macOS is that come keybindings like C-a and C-e work in textboxes in macOS.
pushd/popd - manipulate a stack of directory paths.
Useful to save the current directory, go somewhere else, do stuff and then come back to the original directory.
It works awesomely in bash scripts too!
Useful to save the current directory, go somewhere else, do stuff and then come back to the original directory.
It works awesomely in bash scripts too!
hyperlink btw https://youtu.be/okGN2RXFw_U
fill the screen/DEC tube alignment sequence
printf "\033#8"bash disown command, particularly useful if I forget to prepend nohup
cd - to come back to your previous directory location
ctrl+r to search previously entered commands.
1. create aliases for everything in ~/.bashrc to speed things up
2. window stacking / multi-tasking in iTerm with cmd + (shift) + d
3. turn on vi(m) syntax highlighting by adding :syntax on to ~/.vimrc
4. use jq to format and colorize json files / streams with the pipe | operator (so useful!)
5. Generate a custom command prompt at http://bashrcgenerator.com/ (just for fun)
I really like this topic, so made a video going into more detail on mine, if anyone's interested https://youtu.be/okGN2RXFw_U