How to grow green potassium ferrioxalate crystals from iron rust(crystalverse.com)
crystalverse.com
How to grow green potassium ferrioxalate crystals from iron rust
https://crystalverse.com/potassium-ferrioxalate-crystals/
37 comments
The solution turns yellow in sunlight due to a light driven redox reaction:
Potassium trioxalato ferrate (III) is photosensitive, i.e. it decomposes when exposed to light, reforming iron (II) oxalate.
https://www.dimanregional.org/cms/lib/MA01929605/Centricity/...
I believe that the reason it turns green again in the dark is because the oxygen of the air oxidizes the iron back to the iron (III) form. This proceeds easily if there is excess oxalic acid. In the absence of excess oxalic acid, this could still happen via a disproportionation sort of reaction that turns some of the iron (II) oxalate into insoluble iron crud (mixed oxides/hydroxides) and frees its complexed oxalate to reform the iron (III) complex.
You could test to see if it's oxygen from the air by exposing some of the solution to sunlight until it turns yellow, then storing half in a capped container with no head space for air, and the other half in an open topped container. Does the solution in the open topped container turn green faster? Does the solution in the closed container turn green again at all?
Potassium trioxalato ferrate (III) is photosensitive, i.e. it decomposes when exposed to light, reforming iron (II) oxalate.
https://www.dimanregional.org/cms/lib/MA01929605/Centricity/...
I believe that the reason it turns green again in the dark is because the oxygen of the air oxidizes the iron back to the iron (III) form. This proceeds easily if there is excess oxalic acid. In the absence of excess oxalic acid, this could still happen via a disproportionation sort of reaction that turns some of the iron (II) oxalate into insoluble iron crud (mixed oxides/hydroxides) and frees its complexed oxalate to reform the iron (III) complex.
You could test to see if it's oxygen from the air by exposing some of the solution to sunlight until it turns yellow, then storing half in a capped container with no head space for air, and the other half in an open topped container. Does the solution in the open topped container turn green faster? Does the solution in the closed container turn green again at all?
I'm pretty sure it's oxygen. The same thing happens with solarized (sun-bleached) cyanotypes, according to the Cyanomicon, except that there the colors are white and blue rather than yellow and green. I think Chase is right that with oxalate this requires excess oxalic acid, so you can't repeat it indefinitely, while the ferricyanide/ferrocyanide redox cycle is reversible.
Light reduces the iron center of the ferrioxalate ion, and oxidizes the oxalate ion into carbon dioxide. Since the green color of the solution is due to ferrioxalate ions, a loss of them will make the solution browner, which is the color of iron.
If there is excess oxalic acid present, then the extra oxalate ions can form ferrioxalate ions in the absence of light, causing the solution to revert to green.
If there is excess oxalic acid present, then the extra oxalate ions can form ferrioxalate ions in the absence of light, causing the solution to revert to green.
They are probably co-crystallized with it in the same way many crystals are with hydroxide - https://en.wikipedia.org/wiki/Water_of_crystallization#Other...
UV induced fluorescence would have been cooler tho
UV induced fluorescence would have been cooler tho
Rad! He also shows how to grow beautiful crystals that are safe to work on with your kids: https://crystalverse.com/grow-alum-crystals-at-home/
Probably different chemistry but made me think that you could also pin an insect, leave it for a hundred-plus years, and get some [slightly smaller crystals](https://www.researchgate.net/figure/A-carpenter-moth-Cossida...), a well known curatorial issue in entomology collections.
You might like Emerald ps. Snail
https://www.geologyin.com/2016/06/fossilized-gastropod-repla...
I have so many questions.
How hard are they? Are they fragile?
Many of them suffer from desiccation and I wonder if they can be "sealed" in some manner. Or if the UV-sensitive crystals can be protected by some kind of coating.
It would also be interesting to see what would happen using the crystals grown in one solution as seeds in a chemically different solution. The right sequence might not be reactive, but you could layer them ...
How hard are they? Are they fragile?
Many of them suffer from desiccation and I wonder if they can be "sealed" in some manner. Or if the UV-sensitive crystals can be protected by some kind of coating.
It would also be interesting to see what would happen using the crystals grown in one solution as seeds in a chemically different solution. The right sequence might not be reactive, but you could layer them ...
They are hardy enough to be handled, but will chip if scratched, and break if dropped.
I store my crystals in a sealed container, and they are fine after a month. People who have left them outside do not report dehydration, but the surface still turns white due to exposure to light.
Some crystals can be successfully sealed in resin to prevent dehydration. Preventing light from photodecomposing potassium ferrioxalate crystals would be very tricky. I do not know whether it is possible.
I store my crystals in a sealed container, and they are fine after a month. People who have left them outside do not report dehydration, but the surface still turns white due to exposure to light.
Some crystals can be successfully sealed in resin to prevent dehydration. Preventing light from photodecomposing potassium ferrioxalate crystals would be very tricky. I do not know whether it is possible.
My copper sulfate crystal, about the size of a half a banana and grown from information on the article’s site, is doing well submerged in mineral oil in a sealed glass jar.
If you do this, get it fairly dry first because surface moisture will form a thin layer between the oil and the crystal making a shiny surface from different refractive indices.
If you do this, get it fairly dry first because surface moisture will form a thin layer between the oil and the crystal making a shiny surface from different refractive indices.
It would also be interesting to see what would happen using the crystals grown in one solution as seeds in a chemically different solution. The right sequence might not be reactive, but you could layer them ...
Ooh, epitaxial growth! Could try that with a series of alums - Al(iii), Cr(iii) and Fe(iii) is all readily available.
Ooh, epitaxial growth! Could try that with a series of alums - Al(iii), Cr(iii) and Fe(iii) is all readily available.
What frustrates me with how-to guides such as this one is the lack of followable detail, the vagaries and lack of conciseness.
Take this phrase:
> I heated the iron hydroxide strongly to convert it into iron oxide.
What does this mean? What is "strongly"? Is 'strongly' putting it in the microwave for five minutes?
Take this phrase:
> I heated the iron hydroxide strongly to convert it into iron oxide.
What does this mean? What is "strongly"? Is 'strongly' putting it in the microwave for five minutes?
Sorry about that. I tried to keep it short, as the guide is long enough already. Since some of you have commented about that, I'll make some edits to it. Thanks for the feedback.
I heated it at 200C for 1 hour on a hot plate. You might need to heat a bigger batch for longer. Generally, I do double the time for it to get completely dry, to make sure all the iron hydroxide is converted to iron oxide.
I heated it at 200C for 1 hour on a hot plate. You might need to heat a bigger batch for longer. Generally, I do double the time for it to get completely dry, to make sure all the iron hydroxide is converted to iron oxide.
> I heated it at 200C for 1 hour on a hot plate.
Now this is extremely helpful, thank you!
Now this is extremely helpful, thank you!
Green rupees turn yellow after exposure to light? Infinite money glitch!
(Yellow rupees are worth 10 green rupees in the Zelda games)
(Yellow rupees are worth 10 green rupees in the Zelda games)
Have you ever tried suspending the more toxic crystals in epoxy resin so they would be safe to handle?
The hardware stores here sell potassium bioxalate (salt of lemon) as a rust remover, which I suspect produces precisely this material. (Someone here on HN helpfully corrected me last year when I expressed skepticism that oxalic acid would remove rust. I was wrong!)
Barkeeper's Solution. (I'm hellbanned. Why am i commenting?)
> (I'm hellbanned. Why am i commenting?)
Sometimes I wonder that too. Have you reached the point where sometimes you imagine people responding to your invisible posts? Regardless, Happy New Year!
Sometimes I wonder that too. Have you reached the point where sometimes you imagine people responding to your invisible posts? Regardless, Happy New Year!
Bar Keepers Friend? Regardless, thank you!
https://www.barkeepersfriend.com/8-ways-not-to-use-bar-keepe... says BKF is oxalic acid rather than potassium bioxalate.
https://www.barkeepersfriend.com/8-ways-not-to-use-bar-keepe... says BKF is oxalic acid rather than potassium bioxalate.
>To carry out electrolysis, I first prepared salt solution as the electrolyte. Then, I used a piece of iron as the positive electrode and a steel wire as the negative electrode.
Wouldn't you risk producing chlorine gas due to the salt in the solution?
Wouldn't you risk producing chlorine gas due to the salt in the solution?
I believe with some electrode materials it is possible to make chlorine gas, I'm not sure if steel and iron are some of them.
But either way, as I understand if, you do it slowly you're _mainly_ going to make bleach instead, with small amounts of chlorine gas.
Probably not the best idea to breathe it anyway, but shouldn't take much ventilation to make it perfectly safe.
But either way, as I understand if, you do it slowly you're _mainly_ going to make bleach instead, with small amounts of chlorine gas.
Probably not the best idea to breathe it anyway, but shouldn't take much ventilation to make it perfectly safe.
"Some of you might have concerns that chlorine gas will develop, but because chlorine is so reactive, and because the salt solution is dilute, it’s safe for this setup."
Not sure if that was added later.
Not sure if that was added later.
Yes, as the text in the part I quoted says "dilute" now as well. Which is good as there are many "bucket chemists" out there, people who think, why add a pinch as more will be better and quicker mindsets kick in.
You are oxidizing the iron instead of the chloride ion. The great reactivity of chlorine gas indicates that it requires much energy to prepare.
Awesome article!
I would love if there was a part on crystal properties - how hard it is, how long does it last in normal everyday conditions, etc.
Im so sick of the crystal hype squad trying to get us to rewrite our rust.
[deleted]
[deleted]
> Ad Blocker Detected
> Hey there. I'm a uni student, and displaying ads on my website helps support me in my studies. I'll try my best to share my love of crystal growing with you. Please consider supporting me by disabling your ad blocker. Thank you!
Ads are toxic and privacy-destroying. Give me the option of sending you a couple bucks and I’ll gladly do so, but no, I will not let some horrible ad network run arbitrary JavaScript on my processor to drain my battery, spy on me, and waste my attention on more shit I don’t need or want.
> Hey there. I'm a uni student, and displaying ads on my website helps support me in my studies. I'll try my best to share my love of crystal growing with you. Please consider supporting me by disabling your ad blocker. Thank you!
Ads are toxic and privacy-destroying. Give me the option of sending you a couple bucks and I’ll gladly do so, but no, I will not let some horrible ad network run arbitrary JavaScript on my processor to drain my battery, spy on me, and waste my attention on more shit I don’t need or want.
"Please don't complain about tangential annoyances—things like article or website formats, name collisions, or back-button breakage. They're too common to be interesting."
"Please don't pick the most provocative thing in an article or post to complain about in the thread. Find something interesting to respond to instead."
https://news.ycombinator.com/newsguidelines.html
p.s. Trollish usernames aren't allowed here (https://hn.algolia.com/?sort=byDate&dateRange=all&type=comme...), even when they're trolling YC or whatever, so I've banned the account. Please don't create accounts to break the site guidelines with.
"Please don't pick the most provocative thing in an article or post to complain about in the thread. Find something interesting to respond to instead."
https://news.ycombinator.com/newsguidelines.html
p.s. Trollish usernames aren't allowed here (https://hn.algolia.com/?sort=byDate&dateRange=all&type=comme...), even when they're trolling YC or whatever, so I've banned the account. Please don't create accounts to break the site guidelines with.
I (genuinely) wonder, how often have you paid authors for their articles/blog posts?
I run a website of guides, and have a paypal donate button, and I think about 1 in 10,000 visitors donate. Donations are mostly $1 or so, but I got a $1000 one once.
Overall, a substantially lower return than ads.
Overall, a substantially lower return than ads.
How much do you make per 10,000 visitors? The ads you refer to, are they billed by CPM or CPI?
Not the poster, but I have a Patreon account full of my favorite bloggers and YouTubers.
I understand why they would turn yellow, but how can they turn back to green when keeping them in the dark? They absorb carbon dioxide passively somehow?