Just go to https://iknowwhatyoudownload.com/en/peer/ and put anyones IP in, depending on how static it is, it will provide at least accurate recent data on public trackers.
Dark mode allows you to use a high brightness and contrast setup in more lighting scenarios, you can't use high brightness in the darkness if 99% of the screen is white.
Something could be said for appropriate lighting, but in the reality is your don't got to choose that all the time, and sometimes you just want to maintain the lighting situation because of another activity (maybe a baby is asleep in the same room, or you or someone else is watching a movie).
There's nothing more jarring than lighting up a dark room with your phone because you opened up something that decides to predominately use white for some reason, besides the fact it definitely uses more power on an amoled display, which most displays are hopefully moving towards.
I'm sure light mode appreciators are always on top of changing their display brightness, but I'm still curious how they deal with amoled displays.
Android has a feature that lets you limit time in specific apps to X minutes, you can set these and the app will go black and white when you approach the limit and just close when the time is up.
I found that's a good compromise to outright blocking things, because in reality you do need stimulation, but setting limits to the sources you usually get it from can be very helpful.
Instead of spending 3 hours on a clicker app (so evil) I've allowed myself 5 minutes a day, which means whenever I open it I'm going to do the most important things then close the app as soon as possible, whilst still getting the stimulation I was seeking in the first place.
PS/2 supports lots of RGB, I'm using one, because using the USB costs CPU where as the PS/2 does not, and PS/2 gives NKRO and lower latency, however insignificant they are.
It's entirely a preference based thing, the most relevant factor would be whether or not you need to hot swap it.
Most importantly it removes the penalty of using a 1000hz scanning input which can have an adverse affect on the cpu whilst providing a better (yet insignificant) result.
Completely missing the fact that enthusiast keyboards still prefer PS/2 for NKRO (no key-rollover) and HW interrupt support which results in sub 10ms delays.