How to trigger a command on Linux when power switches from AC to battery(dataswamp.org)
dataswamp.org
How to trigger a command on Linux when power switches from AC to battery
https://dataswamp.org/~solene/2025-05-31-linux-killswitch-on-power-disconnect.html
45 comments
Maybe you know this, but UPSs have signaling software to tell whomever it may concern if it has lost power and is running on battery.
For big servers, the UPS's batteries might only give minutes of power, so they'd listen for such a signal to do an orderly shutdown.
For big servers, the UPS's batteries might only give minutes of power, so they'd listen for such a signal to do an orderly shutdown.
> I wonder if the same approach will also work for a computer connected to a UPS. Probably not!
Considering that my UPS appears as a battery in KDE when I plug the USB cable in, I wouldn't be surprised if it's treated the same as a laptop battery across most of the stack
Considering that my UPS appears as a battery in KDE when I plug the USB cable in, I wouldn't be surprised if it's treated the same as a laptop battery across most of the stack
Computers connected a UPS can use tools like NUT or more specific tools like apcupsd. It's much more common to need to know when a UPS powered device switches to battery to trigger stuff than it is to need to know when a laptop switches to battery, so there's a lot more tooling in that area.
Was the title changed since this comment? It now says “How to trigger a command on Linux when power switches from AC to battery”, which seems perfectly clear. I’m guessing “from AC to battery” was not present initially?
Yeah, it was when disconnected from power at first
"on power disconnection" (event) probably would've worked better than "when disconnected from power" (time period).
+1 to this.
This is still a logical use case, but it's not the mental image that immediately got conjured up after reading the title for me.
This is still a logical use case, but it's not the mental image that immediately got conjured up after reading the title for me.
+1?
It's a way of signaling agreement.
They were correcting my initial "1+"
Yes, thank you. Fatfingered
With that example, why not just remove the battery entirely?
As for a UPS, I have a Synology NAS that can monitor an APC UPS over its serial USB port. When the UPS loses power or is told to gracefully shutdown, the NAS also gracefully shuts down.
As for a UPS, I have a Synology NAS that can monitor an APC UPS over its serial USB port. When the UPS loses power or is told to gracefully shutdown, the NAS also gracefully shuts down.
>. Someone steals it, which involves unplugging it from the wall. At the moment it is unplugged it automatically shuts down
You could achieve same thing if you unplug your battery.
You could achieve same thing if you unplug your battery.
Thanks for reporting, I updated the title, I hope it will be clearer for new readers.
For the APC, use nut :)
For the APC, use nut :)
That's exactly how I understood the headline.
It is interesting how laptops, whether running a consumer operating system or Linux, are poorly protected from theft. There is the Kensington lock hole that nobody uses and that is about it. Really, any laptop needs to be a brick without the magic password or bio-id, if the owner has configured it to be so when stolen, as identified by a change of power source or other cause.
As it is, all you need is a screwdriver to take out the disc, put it in another box, format it and put it back. Then you have a machine good to sell on eBay.
NFC could be another way of protecting a PC so you need your phone to unlock it.
PCs used to have a low grade lock on them originally, that locked the power button and disks behind a flimsy piece of plastic. This feature was soon dropped.
Clearly the market does not demand theft proofing. Otherwise we would have a little bit more than noble efforts like this udev script.
As it is, all you need is a screwdriver to take out the disc, put it in another box, format it and put it back. Then you have a machine good to sell on eBay.
NFC could be another way of protecting a PC so you need your phone to unlock it.
PCs used to have a low grade lock on them originally, that locked the power button and disks behind a flimsy piece of plastic. This feature was soon dropped.
Clearly the market does not demand theft proofing. Otherwise we would have a little bit more than noble efforts like this udev script.
There's much much better Secure Boot and encrypted disk options than there used to be, which is good!!
But it does feel like the security regime is pretty lax. I feel like some BLE tracker system is a natural fit for laptops. I'd love a motion sensor alarm built in.
Framework laptop's embedded controller is open source, run Zephyr. I don't think there's a ton of peripherals it has access too, but I love the idea that one could potentially make their own firmware that has their own security designs built in.
But it does feel like the security regime is pretty lax. I feel like some BLE tracker system is a natural fit for laptops. I'd love a motion sensor alarm built in.
Framework laptop's embedded controller is open source, run Zephyr. I don't think there's a ton of peripherals it has access too, but I love the idea that one could potentially make their own firmware that has their own security designs built in.
M1 Macs are more theft-proof than most: it's useless if it's attached to someone else's iCloud account.
It even has parts pairing, so the e.g. the screen has some features disabled if you swap it.
It even has parts pairing, so the e.g. the screen has some features disabled if you swap it.
Problem with theft-proofing is it inherently comes at the cost of both repairability and recyclability. If every part is cryptographically locked to its parent machine, you can't scrap devices for parts.
Sometimes there's "unlock before recycling" flows but generally people are pretty unlikely to know they should do that, and even less likely to remember to do it.
Sometimes there's "unlock before recycling" flows but generally people are pretty unlikely to know they should do that, and even less likely to remember to do it.
udev is useful for customizing all sorts of ergonomics. My example: when my keyboard/mouse switches from one machine to another, control signals are sent to each monitor. This mimics a very expensive 8k DisplayPort KVM.
So that’s an option rather than power. Devise where you’d place a YubiKey on an extension cord, with its removal triggering logout and shutdown.
So that’s an option rather than power. Devise where you’d place a YubiKey on an extension cord, with its removal triggering logout and shutdown.
On macOS this is elegant and efficient by listening to OS level notifications into userland. Tapping into IOKit - namely IOPowerSources and IOPSNotificationCreateRunLoopSource - is trivial and will notify you when there is a power source event.
I believe Windows has something similar - also an event.
I believe Windows has something similar - also an event.
This is pretty much what this solution does, but through udev.
Systemd, D-Bus, and udev can be used separately or together to make this easier to listen in userland, it will just be dependent on your distribution or setup.
The kernel essentially flags the power source through udev, and the rule triggers the script. That can be done programmatically instead of a script as well. libudev is there for that: https://www.freedesktop.org/software/systemd/man/latest/libu...
https://wiki.archlinux.org/title/Udev (userland /dev is what udev does)
Systemd, D-Bus, and udev can be used separately or together to make this easier to listen in userland, it will just be dependent on your distribution or setup.
The kernel essentially flags the power source through udev, and the rule triggers the script. That can be done programmatically instead of a script as well. libudev is there for that: https://www.freedesktop.org/software/systemd/man/latest/libu...
https://wiki.archlinux.org/title/Udev (userland /dev is what udev does)
I use an APC with a management cable, triggers graceful shutdown and startup on reconnection. It also e-mails me and stores a log. I prefer this approach so 99% of ecosystem isn't on the server, you can let your server do server things and not be the battery police.
Yep, I have used apcupsd on Linux, Windows and macOS for more than a decade. It’s been triggered many times, too!
How does it trigger the shutdown? Does it have a power switch connection to the motherboard?
shutdowns can be done in software like 'sudo systemctl halt', so it doesn't need a line straight to the motherboard. That's the desired path because it lets running applications gracefully close and finish writing to disk.
Well, yes. But they liked that "99% of ecosystem isn't on the server" which makes me think it isn't a software solution. What is the 1%?
That's neat, I'd never considered one could use udev reactively like this! Very nice.
Not nearly as elegant, but I keep running into problems where I want to run some command when X happens. I've been trying to lean into systemd, creating a service for whatever it is I want run (perhaps just a oneshot if it's a a one off command). Then have a separate program that detects for the desired condition (polling?) and runs systemd-notify to signal that it's healthy. Then you can just BindTo=, so that the desired command runs whenever the condition-detector thing goes green.
Not nearly as elegant, but I keep running into problems where I want to run some command when X happens. I've been trying to lean into systemd, creating a service for whatever it is I want run (perhaps just a oneshot if it's a a one off command). Then have a separate program that detects for the desired condition (polling?) and runs systemd-notify to signal that it's healthy. Then you can just BindTo=, so that the desired command runs whenever the condition-detector thing goes green.
Pah! Shut the system down like a real BOFH! Use the Magic SysRq Key interface to instantly crash the system:
echo 1 > /proc/sys/kernel/sysrq
echo o > /proc/sysrq-trigger
Wouldn’t this potentially leave e.g. disk encryption keys in memory?
You'd probably want to do the filesystem unmount dance first:
echo 1 > /proc/sys/kernel/sysrq
echo u > /proc/sysrq-trigger
dmesg --follow \
| grep -qm1 'Emergency Remount complete'
echo o > /proc/sysrq-trigger
Interestingly, a few months ago I wanted a similar thing for Windows. Ended up developing a simple tray utility for that. Probably the most important method is the handler of WM_POWERBROADCAST message: https://github.com/Const-me/SleepOnUnplug/blob/0.4/SleepOnUn...
I'm using NUT ( https://networkupstools.org/index.html ) to distribute the backup power events from the one usb connected system to all other machines relying on the batteries.
Works pretty well so far.
Works pretty well so far.
I remembering profiling battery life on a chromebook that I put GalliumOS on. When it would be on timestamp, off timestmap and then it would tally up runtime in hours/minutes, nasty bash
So for those who want the tl;dr: The answer is just "use a udev rule".
Udev is one of those classic open source tools that is immensely powerful and gracefully well designed, with all sorts of emergent power...
...that ends up being an obscure bit of graybeard prestidigitation purely because of it's awful syntax.
No really, there's a very clean mapping between the state in sysfs and the resulting uevents produced. You just can't tell because of the way it looks.
Udev is one of those classic open source tools that is immensely powerful and gracefully well designed, with all sorts of emergent power...
...that ends up being an obscure bit of graybeard prestidigitation purely because of it's awful syntax.
No really, there's a very clean mapping between the state in sysfs and the resulting uevents produced. You just can't tell because of the way it looks.
If you don't like udev (and I don't blame you, I hate it too), you can do the exact same thing with mdev or acpid.
Oh, I like udev! I'm just sad that so few people know anything about how sysfs/uevents/udev work, because it seems so ugly and arcane when you're exposed to your first udev rule.
> I'm just sad that so few people know anything about how sysfs/uevents/udev work
Here's the opportunity to write a blog post about it.
Here's the opportunity to write a blog post about it.
imcritic(3)
What it’s actually about how to automatically automatically trigger a command on a Linux computer (almost certainly a laptop) in the event that it switches from AC power to battery power.
The example given is your laptop is plugged it at a café. Someone steals it, which involves unplugging it from the wall. At the moment it is unplugged it automatically shuts down, locks itself, etc.
I wonder if the same approach will also work for a computer connected to a UPS. Probably not!