blackkat·tahun lalu·discussWould you mind giving some pointers of where to start?There is a wasteland of blogspam around the topic of getting started with ML and it’s hard to know what is useful at the beginning.
blackkat·2 tahun yang lalu·discussSome specs here: https://www.digikey.ca/en/product-highlight/r/raspberry-pi/r...Based on the RP2350, designed by Raspberry Pi in the United KingdomDual Arm M33s at 150 MHz with FPU520 KiB of SRAMRobust security features (signed boot, OTP, SHA-256, TRNG, glitch detectors and Arm TrustZone for Cortex®-M)Optional, dual RISC-V Hazard3 CPUs at 150 MHzLow-power operationPIO v2 with 3 × programmable I/O co-processors (12 × programmable I/O state machines) for custom peripheral supportSupport for PSRAM, faster off-chip XIP QSPI Flash interface4 MB on-board QSPI Flash storage5 V tolerant GPIOsOpen source C/C++ SDK, MicroPython supportSoftware-compatible with Pico 1/RP2040Drag-and-drop programming using mass storage over USBCastellated module allows soldering directly to carrier boardsFootprint- and pin-compatible with Pico 1 (21 mm × 51 mm form factor)26 multifunction GPIO pins, including three analog inputsOperating temperature: -20°C to +85°CSupported input voltage: 1.8 VDC to 5.5 VDC
blackkat·2 tahun yang lalu·discussDo you happen to recall the post in particular that helped you with this realization?
There is a wasteland of blogspam around the topic of getting started with ML and it’s hard to know what is useful at the beginning.