TypeScript vs. ReasonML(blog.dubenko.dev)

blog.dubenko.dev

https://blog.dubenko.dev/typescript-vs-reason/

228 comments

I'm building a project in ReasonML right now with reason-react. The Reason-only parts are actually a joy. The problem is interop with the wider ecosystem, and bucklescript.

They are serious problems. You end up writing a ton of [@bs.... ] annotations to get things to work together that ultimately result in runtime errors.

I hate battling a compiler (with sometimes quite cryptic errors, particularly identifying syntax errors) only to find that I can't actually free myself from the same type of errors I'd see with regular old JavaScript.

I can dig through my discord history and give more specifics. But given the massive learning curve and poor tooling that exists these days it's a step backwards from mainstream production JS development.

That said, the community has really got some wonderful folks out there, and is very helpful. I hope they can figure out interop with basic JS like promises. And tooling. And let me use async/await. And make bundle splitting easier to implement.

dpwm7 anni fa

I've been using of BuckleScript and OCaml for a couple of years now. I'd been using OCaml for a long time before then. I tried ReasonReact, and found that I preferred the OCaml + vdom library way.

I first used my own minimal bindings to Mithril, but then later moved to an Elm Architecture implementation for bucklescript: bucklescript-tea. After being on a deadline and either completely misunderstanding or finding significant show-stopping bugs in bucklescript-tea's virtual dom implementation, I reimplemented the parts of the API I'd used from bucklescript-tea with a minimal alternative that called out to snabbdom for the vdom stuff. This was mainly as a learning exercise, which took all of about two afternoons of fairly relaxed work.

The only places I have needed to use annotations with this approach is in my modules that call out to JavaScript. This is really unavoidable, and you'd surely find the equivalent information would have to be provided if you used F# or PureScript, or your compiler simply won't know the types.

I'm sure my approach, with layers on layers of functions to build virtual dom nodes, is certainly not going to win any benchmarks, and it's certainly not novel – but it's good enough, and my productivity is up. I can leave a project for months and be relatively unsurprised by what I find when I return – because there's usually only one sensible way to do things. Everyone's different, though, and I fully respect it may not work for all.

The key lesson I've learnt is that interop is painful because the some of the bucklescript types do not neatly map how you would necessarily imagine to javascript types. But if you do this at the edges, and write sufficient wrappers, you won't have any problems.

The biggest pain point for a while has been that bucklescript is based on an old version of OCaml – and there have been some very nice additions to the OCaml standard library since then. That said, I think it's excellent that we've got two OCaml -> JS pathways in the OCaml world now.

yawaramin7 anni fa

Just fyi– bs-platform 6 and above are based on OCaml 4.06. So, still not the latest, but a bit more recent! In particular, it supports record types directly embedded in variant constructors without having to declare them first.

jasim7 anni fa

My recommendation for using Reason in production is to go for it -- but only if someone in the team has previously shipped production software in a typed functional programming language. If not, use it in a non-critical project, have a pair of programmers build up expertise over around six months of full-time work, and then make the jump for the entire team.

Regarding bindings -- which external libraries were you using? Component libraries written for React could be a fair amount of work to write bindings for, but I anyway prefer hand-rolling components with Tailwind, so that hasn't been a problem personally.

Bindings were indeed difficult when I started out - Javascript can invoke functions in a myriad ways: new xyz(), object.key, object.key(), module defaults, Math.abs etc. We have to map them to OCaml's semantics (easy), and figure out the BuckleScript macros for them (easy with practice). I recently wrote a bunch of bindings for Adobe XD, and it was surprisingly fun.

deathtrader6667 anni fa

You could write your app using the Elm-inspired Bucklescript-TEA [0] framework in OCaml, and use js_of_ocaml to transpile OCaml into JavaScript.

[0] - https://github.com/OvermindDL1/bucklescript-tea

pkilgore7 anni fa

In what ways does it fix my major issues with bucklescript (simple interop with JS libraries / object / output, promises, async/await being highest on the list).

deathtrader6667 anni fa

With js_of_ocaml, you need not use Bucklescript at all.

Both are transpilers for OCaml -> JavaScript.

wtetzner7 anni fa

Is Bucklescript-TEA available through OPAM, or only through NPM?

EDIT: Nevermind [1]

https://github.com/OvermindDL1/bucklescript-tea/issues/45

wtetzner7 anni fa

I have to say though, the ELM architecture actually lends itself better to OCaml than ELM, because functors give you a really nice way to compose components.

_hardwaregeek7 anni fa

For real. It's hard to get support for browser APIs, let alone libraries. Getting Reason to work with File objects is just an utter pain.

grumpy87 anni fa

IMHO the biggest reason to use TypeScript rather than Reason is because, in the end, it's still javascript and it stays within the same ecosystem. As great as Reason is, it's adding too many dependencies. The only time I'd go with Reason instead of Typescript is if the developers on the team are already proficient with OCaml. It's going back to the "Use boring technologies even though some things suck as it's better to deal with known issues than unknown issues; the grass isn't always greener with new technologies, just different things that suck".

robbrit7 anni fa

> it's still javascript

This is exactly the reason why Typescript took off and none of the other compile-to-JS languages did (other than a brief flash by CoffeeScript). Dart had a very similar problem as Reason - it wasn't Javascript. The interop between Dart and JS libraries was just too much of a pain to deal with, where in Typescript everything just worked.

Since building your own ecosystem that rivals the JS ecosystem for libraries is an extremely difficult task, any candidate to replace JS must have good interop with its libraries to be successful.

StreamBright7 anni fa

>> in the end, it's still javascript

This is exactly the reason I prefer Reason. :)

hermanradtke7 anni fa

TypeScript interops with JavaScript much easier than ReasonML. I can’t stand BuckleScript and all the work required to interop with the rest of the JS ecosystem.

gridlockd7 anni fa

ReasonML is also just Javascript in the end, dealing with the same platform limitations.

dymk7 anni fa

This is like saying Rust is just x86 assembler

wvenable7 anni fa

The more high-level the target, the more that target bleeds through and the more you have to deal with it.

dymk7 anni fa

Certainly not; see for instance asm.js. Arbitrary C++ (or any other LLVM language) can be translated into JS this way.

ori_b7 anni fa

Except wasm isn't JS. It's yet another vm in the browser.

dymk7 anni fa

You're right; I mean asm.js. Point stands. You can compile arbitrary languages into JS without the "js" part leaking through.

gridlockd7 anni fa

The JS part definitely leaks through even with asm.js, particularly the lack of native 64-bit integers.

The further away you go from Javascript, the more performance issues you encounter and the larger your build size becomes.

Of course in theory nothing stops you from having an entire turing-complete VM inside JS, but that's not what you want for real deployments.

wvenable7 anni fa

I don't think this refutes my original point. Asm.js is exactly a low-level subset of JavaScript.

ReasonML doesn't compile to Asm.js. Most languages that compile to JavaScript also want to interop with JavaScript APIs and other high-level JavaScript code. Other posts in topic discuss this exact difficulty of combining ReasonML with the JS ecosystem.

jimbokun7 anni fa

And?

s_y_n_t_a_x7 anni fa

You can rename a JS file to a TS extension and it's TypeScript. The annotations are replaced with whitespace when JS is generated, it doesn't result in different code.

gridlockd7 anni fa

Being as close as possible to JS for transpilation is a design goal of Typescript, but the compiler still does more than just strip away the types if you use certain language features.

If it was just about stripping away types, then there wouldn't be a need for a compiler and the type checker could be a separate program.

WorldMaker7 anni fa

You can already run Typescript type checker separately from a type stripper today, though. Typescript has babel plugins for exactly that. Almost all webpack best practices for Typescript involve the fork-ts-type-checker plugin, running type checks in a separate thread from the transpile phase.

At this point almost all of what Typescript compiles (transpiles) that isn't just "type stripping" is some form of downleveling from current ES standards to older ES versions and is almost all entirely optional. There's also nothing stopping you from leaving it all to Babel to do it instead of having Typescript do it, if you wish.

(Though personally, I think Typescript is a lot lighter weight a solution than most Babel presets and tslib (the optional dynamic link version of the inline downlevel helper functions TS emits) is a lot smaller than Babel's equivalents in core-js.)

ernst_klim7 anni fa

> ReasonML is also just Javascript in the end

It's not, it's a mere syntax rewriter for OCaml. OCaml has default native target, bytecode target, and two JS transpilers.

lovasoa7 anni fa

I think the comparison in the redux example really isn't fair. He defines just one enumeration in ReasonML and uses many different constants and interfaces in Typescript.

The equivalent of

    type action =
      | AddMovie(string)
      | RemoveMovie(string)
      | Reset

in Typescript is more something like :

    type Action =
      | { type: "ADD_MOVIE", movie: string }
      | { type: "REMOVE_MOVIE", movie: string }
      | { type: "RESET"};

nirvdrum7 anni fa

Since TS is just JS, you could just dispatch to arbitrary strings, but the TS type system isn't going to help you out very much. The approach the author is taking is the one described in the Redux documentation [0].

[0] -- https://redux.js.org/recipes/usage-with-typescript

acemarke7 anni fa

Hi, I'm a Redux maintainer. FWIW, there's apparently a ton of ways to handle typing Redux with TS (and that's even reflected in the discussion for the PR that added that page [0]). A large part of it seems to revolve around whether or not you're trying to apply action types to `dispatch` to limit what actions can be dispatched.

I'm comfortable with TS at a general level (declaring interfaces for API types, reducers, and React component props), but a lot of folks seem to go crazy trying to get 100% type coverage. I personally aim for more of an "80%" sweet spot for typing - trying to trade off overall benefit with not trying to tie myself in knots adding ridiculous type declarations.

I actually just wrote a tutorial page for Redux Starter Kit that shows how to use it with TS and `useDispatch` [1], but had someone point out that one of the examples I was using for thunks was losing a bit of type safety [2]. This stuff is hard :)

[0] https://github.com/reduxjs/redux/pull/3201

[1] https://redux-starter-kit.js.org/tutorials/advanced-tutorial

[2] https://github.com/markerikson/rsk-github-issues-example/pul...

nirvdrum7 anni fa

Thanks for the feedback. The earliest examples I had see of using redux just passed strings around and struck me as being error-prone. So I was happy to see const fields used as the action types. The TypeScript approach looks reasonable to me, if not verbose. But it looks like there's no real consensus on what the best practice is. Certainly some food for thought. Thanks!

crimsonalucard7 anni fa

Right but the type script version isn't type checked. You need explicitly check for those strings at runtime. The type checker needs to prove the program type correct without explicit input from you.

ReasonML has better theoretical foundation. The variant type is a primitive type that TS and many other languages miss.

spion7 anni fa

The type script version is type checked: http://bit.ly/2lVoSgY

  type State = {
    movies: string[]
  };

  type Action =
    | {type: 'AddMovie', movie: string}
    | {type: 'RemoveMovie', movie: string}
    | {type: 'Reset'}

  let defaultState:State = { movies: [] }

  let reducer = (state: State, action: Action): State => {
    switch(action.type) {
      case 'AddMovie': return { movies: [action.movie, ...state.movies] }
      case 'RemoveMovie': return { movies: state.movies.filter(m => m !== action.movie) }
      case 'Reset': return defaultState;
    }
  }

  /* No need for additional functions! */
  let someAction = {type: 'AddMovie' as const, movie: "The End of Evangelion"}

  reducer(defaultState, someAction);

The secret is that typescript doesn't actually lack variants - it does have the equivalent of polymorphic variants. Try adding a new action type, you will get a type error for the reducer return type. It won't be a pretty type error, but you can't forget to add a switch case.

crimsonalucard7 anni fa

My mistake, good to know. The syntax really looks like string comparison rather then actual pattern matching.

spion7 anni fa

It is string comparison, although in terms of performance in JS string constant comparison is done by reference so its much faster.

I believe this is closer to polymorphic variants than to actual sum types (global namespace like strings, comparison by name). You can tighten it a bit by switching to symbols instead of strings, which would guarantee unique tags, getting closer to classic variants. However TypeScript isn't big on nominal types, and for a good reason: the node module system for example can easily cause two versions of a module to be instantiated in the same program which in turn would cause two different and incompatible instances of the symbols and symbol types.

Nevertheless I would still say that FP-like patterns are supported reasonably well.

crimsonalucard7 anni fa

It may be string comparison on the JS level.

However If it is string comparison on the TS level then that means it isn't type checked. Are you sure this is what you mean? That means I can add a new case for string "asdasfsdfds" and TS won't throw a type error.

The variant type is not exclusively an FP paradigm.

spion7 anni fa

If you hover over 'action.type' in the switch statement, you will see

  (property) type: "AddMovie" | "RemoveMovie" | "Reset"

So you can't add a new case because while the value is a JS string, the type is a restricted subset of string i.e. a union of only 3 possible string constants.

Therefore you are right - its not quite a string at the TS level - its a subset of string.

p.s. you can make unions of any primitive values in TypeScript:

  let a:3 | "hello" | true = 3;
  a = "hello"; // valid
  a = true; // valid
  a = false; // not valid!

or between any type and other values, really:

  let a: number | 'NotNumber' = 0;
  a = 1; // ok
  a = a - 1; // still ok, assignment narrowed the type to number
  a = 'NotNumber' // ok
  a = a - 1; // error! narrowed the type to the constant 'NotNumber', can't subtract anymore
  a = 'Hi' // ERROR

TS is not always that smart about it (compared to Flow), but sometimes it works out quite well :)

jameskraus7 anni fa

I wish this comparison included more information about the developer experience of TS vs Reason. In my off time I've tried out Reason, but one of the major sticking points was how _poor_ the experience was setting up an editor with autocomplete and type hints. You get that basically out of the box with TS, but Reason & OCaml have a more fragmented ecosystem, so it's much harder to get started and feel productive.

IMO, the beautiful type system is nice, but the DX with TS is much more productive than Reason or OCaml.

PS: Do you think my comment is dumb? Reason/OCaml are easy to set up? It's as easy as 1-2-3? Please link me tutorials or resources that prove me wrong. I'd love to get started, but DX has been the major hangup again and again.

Dude20297 anni fa

Every technology created at Facebook is meant for internal use. The wider community then goes through the pain of making it usable. Microsoft's mission on the other hand is pleasing developers hence VS Code and TS.

notus7 anni fa

Ugh yeah, the same thing happened with Flow. Massive immediate adoption by react developers and then FB basically saying "screw you" no roadmap and we're never going to add the features you want. I think I still have an open issue in the flow repo for a roadmap.

EDIT: haha here it is https://github.com/facebook/flow/issues/4785

ryanar7 anni fa

Flow engineers communicated a few months back to the community saying that they do care, they just were a small team working on the project and had pressing issues at FB to solve first. They mentioned that Flow was really slow for the large-scale projects that existed at FB and so performance was the immediate concern and that ate a year of time after they open sourced the project.

pknopf7 anni fa

Sounds like it's on life support.

Nobody should be using Flow.

kevinb77 anni fa

This really depends on what you care about. Flow is much better at ensuring type safety in your code while TypeScript has some pretty glaring holes in this respect. In particular, TypeScript allows covariant assignment and param passing which makes it really easy to write unsafe code.

Arnavion7 anni fa

The covariant param passing was fixed some time ago with the (now on-by-default) `strictFunctionTypes` option. Eg `function f(cb: (_: Animal) => void) { cb(new Dog()); }` can no longer be used as `function takes_cat(_: Cat) { } f(takes_cat);`

Assignment is still there though (ie you can still assign a `Cat[]` to an `Animal[]` and push a `new Dog()` into it).

kevinb77 anni fa

I believe that `strictFunctionTypes` only applies to callbacks. TypeScript is okay with the following code even with that option turned on:

  class Animal {}
  class Cat extends Animal { meow() {} }
  class Dog extends Animal { woof() {} }

  function foo(animals: Animal[]) {
    animals.push(new Dog)
  }

  const cats: Cat[] = [new Cat];

  foo(cats);

https://www.typescriptlang.org/play/#code/MYGwhgzhAECCB2BLAt...

Arnavion7 anni fa

Your example is identical to the case I covered in the second paragraph of my comment. ie your code compiles because it is legal to assign a `Cat[]` to an `Animal[]`, as I said.

When you mentioned "covariant param passing" I assumed you were referring to the long-lasting issue about callbacks, hence my original comment mentioning that that issue has been fixed. It's not useful to differentiate between "assigning a value to a variable of a certain type" and "passing a value to a function parameter of a certain type" because those are identical.

[deleted]7 anni fa

jey7 anni fa

I'd bet Flow is basically being replaced by ReasonML at Facebook[1]. Bolting a sound typesystem onto Javascript is really hard, and Flow is making a truly valiant effort, but it seems to have stalled out. Instead, ReasonML is based on starting from a "cleaned up" semantics and type system, then translating it into raw Javascript. This avoids all the weird edge cases and type inference problems one runs into when trying to use Flow[2].

(I don't ever have to have any `any` in my ReasonML code, but it was unavoidable with Flow.)

1. https://reasonml.github.io/blog/2017/09/08/messenger-50-reas...

2. https://github.com/facebook/flow/issues?utf8=&q=is%3Aissue+i...

spoiler7 anni fa

The way the team communicates with the community is sometimes frustrating. Also, a lot of the decision-making (especially around React/JSX typing) happens behind closed doors, with little to no explanation as to why they were made.

coding1237 anni fa

I'd argue Yarn, React, Jest, PyTorch, Hack (and flow even if it's not used much) are examples that show not true. GraphQL may be one of the one of the only examples that needed a bit more to be usable outside of Facebook. All of the others are generally usable out of the box.

smt887 anni fa

I remember when people got excited about Hack, Flow, and Nuclide (or whatever the Facebook IDE was supposed called), but eventually realized the same things that you and GP realized.

Microsoft has paying customers who are devs, and FB doesn't. That explains a lot.

k__7 anni fa

As far as I know BuckleScript isn't a FB project.

chucksmash7 anni fa

It isn't[1]. It's a "partner project" to ReasonML which ReasonML relies on[2].

[1]: https://www.bloomberg.com/company/press/open-source-at-bloom...

[2]: https://reasonml.github.io/docs/en/what-and-why

bartq7 anni fa

Yeah, FB releases libraries only to avoid walled garden situation when they can't hire new people because they're not pre trained or they don't want to use closed and internal only technologies. Remember React licensing problems? These days most of frontend jobs are actually React jobs, which i don't like, I like vanilla web.

Over the time I began more and more appreciate Microsoft's "boringness" (which is debatable itself) because their tools are real products, not marketing tools for developers. What matters more for serious project is tools quality, not few hot CS ideas loosely implemented on a knee.

tyri_kai_psomi7 anni fa

Rust was created to solve's Mozilla's problems with C++

Go was created to solve Google's problems with C++ and engineering at scale

The fact that TypeScript wasn't created to solve a big issue internally at Microsoft is exactly what makes me skeptical of it and personally I view it as a trojan horse, just like VSCode. Sure, today it is done for benevolent reasons, maybe, but what about tomorrow? What if that trillion dollar market cap starts tanking? Then The benevolent VSCode and TypeScript ecosystems become levers to pull in the great big machine.

I would almost feel better if I knew it's stated explicit purpose upfront and what Microsoft's long term goals to monetize the ecosystem/platform were, because then I know what I am signing up for.

WorldMaker7 anni fa

Typescript was created to solve big issues internally at Microsoft, to deal with JS at scale. Microsoft has huge JS codebases, almost all of which are Typescript today. Office.com (including in-browser, online versions of Word, Excel, PowerPoint), Outlook.com, OneDrive.com, portal.azure.com, dev.azure.com, and so on. Microsoft may not be as recognizably a "web applications" company, but they do have a number of really big web applications, and they had real scaling problems with JS that Typescript was directly built to help with.

VSCode was started to see if they could build a good web application for development. Portions of it directly power a number of tools of Azure (on portal.azure.com), portions of it also directly powered the Dev Tools inside IE10+ and Edge "Classic". Bundling the web app into an Electron container after it had already paid for its own engineering efforts several times over as reusable sets of components for multiple large web apps Microsoft needed hardly seems like a "trojan horse" to me.

leeter7 anni fa

> The fact that TypeScript wasn't created to solve a big issue internally at Microsoft

AFAIK it was, the issue was the poor quality of Javascript development they were having and their inability to really get good tooling and static analysis. Then it kind of exploded as other people said "That's cool" and they then pushed it out as open source so that if they did need to let it go it wouldn't be totally dead in the water.

Kip90007 anni fa

You speak with authority, but with ignorance. MS had a lot of JavaScript and needed to put some semblance to the madness of development. Read early history. Watch some talks of Hejlsberg, they are insightful and makes you a better developer.

spion7 anni fa

TypeScript was created to solve issues with front end development at MS, its just that they were also genuinely interested about solving other people's problems.

sdegutis7 anni fa

Microsoft almost definitely has a 30-year-plan with TypeScript that is only slowly being revealed.

ernst_klim7 anni fa

> Every technology created at Facebook is meant for internal use.

Technology is a stretched term for ReasonML. It's a simple syntactic sugar for OCaml. It uses standard OCaml compiler and standard JS transpilers, like js_of_ocaml and bucketscript.

tengbretson7 anni fa

This mirrors my experience. I really wanted to like their Nuclide editor, but it was a broken out of the box experience every time.

alde7 anni fa

Yes, so true. Wish Facebook stated this explicitly on their projects readmes.

thedufer7 anni fa

I've never used Reason, but I find OCaml very easy to set up. This probably depends a lot on how well-supported your editor is. My setup involves:

    sudo apt-get install opam inotify-tools m4
    opam init
    opam switch 4.07.0
    opam install dune merlin ocp-indent

and then add the ocaml layer to my spacemacs config. This gives me auto-indenting, syntax highlighting, type hinting, and my preferred build tool (dune w/ inotify).

FWIW, this was much worse when I did it a couple of years ago. I think the ecosystem has made pretty big strides recently, much of which came from standardizing on dune as the canonical build system.

k__7 anni fa

I have to admit, Reason is a bit more obscure.

I installed bs-platform and still got errors from my IDE about bs-platform missing.

Which was strange, since I used the bs-platform CLI tools.

Turns out you also had to have bs-platform installed locally, but the error messages didn't say anything about this, just "bs-platform not found".

sikan7 anni fa

This shouldn't happen, did you make sure to yarn install and restart the reason language server?

k__7 anni fa

Maybe that was my problem, many project setup tools do the install automatically, you just need to cd and npm start.

johnisgood7 anni fa

I typically install all what you listed, and tuareg. Worth noting that after installing these packages, they tell you how to configure your text editor, or you can choose to let them handle it for you automatically (IIRC). So yes, it is pretty easy to set OCaml up.

thedufer7 anni fa

I believe the spacemacs ocaml layer pulls in tuareg automatically, but that's a good point for other setups.

bgorman7 anni fa

You are looking for "reason-language-server". You can download a VSCode extension with it from the VSCode "marketplace", and if you use a different editor like Vim you can use the language server with whatever vim language server plugin you prefer.

I will admit this is a little bit more confusing than would be ideal, because there is also an older ecosystem called "Merlin". If you are a reasonml beginner, avoid plugins that use Merlin.

brobinson7 anni fa

I spent hours following the (multiple sets of disparate) instructions to set RLS up, and I was never able to get it working so I gave up on ReasonML. I like the concept, but it needs to be as easy to get up and running as Rust/Rust's "RLS".

johnisgood7 anni fa

What is the issue with merlin? Are you referring to https://github.com/ocaml/merlin? I have been using it (with OCaml) without any problems.

bgorman7 anni fa

Merlin requires opam, which is yet another tool beginners need to fight with. Reason support for Merlin was relatively recently merged, so it might work ok right now- but I couldn't get it to work with Reason the last time I tried. I agree it works fine with Ocaml.

jameskraus7 anni fa

Unfortunately I could never get RLS to work for me. I opened an issue on it, but it seems like the small group of people with the same issue haven't had the time/drive/knowledge to fix it. The maintainer doesn't want to fix it himself, but I don't blame him, he doesn't have the same error :/

Maybe it will be ironed out someday...

bgorman7 anni fa

Care to share the issue? I'm willing to look into this

a07 anni fa

There was a workshop at the last ReasonLDN meetup. Here are the slides that were used, they include quickstart instructions: https://docs.google.com/presentation/d/1wuAveSHslRfKShD6SiVd...

If I recall correctly, everyone managed to set things up swiftly, with an exception of one Windows user who had some editor issues.

ernst_klim7 anni fa

> how _poor_ the experience was setting up an editor with autocomplete and type hints.

What? Merlin does all of these right out of the box, and supports emacs, vim and LSP [1]. The setup is basically `opam install merlin` and then `your-editor-package-manager install ocaml/reason-mode`

[1] https://github.com/ocaml/merlin

yawaramin7 anni fa

Nowadays I'd be surprised at people having trouble setting up ReasonML tooling. It should be just:

- npm install --global bs-platform # (you need to ensure you have write access to the global install path)

- Fire up VSCode

- Install the reason-vscode extension

- Run `bsb -init my-project -theme react-hooks` (assuming you want to scaffold a new ReasonReact project)

More details at https://reasonml.github.io/docs/en/editor-plugins

StreamBright7 anni fa

I agree with you. Reason was harder to set up, but it got better nowadays.

pbowyer7 anni fa

I didn't think much of this article ("Another biased comparison, yawn") until I got to the Reducer example.

I read up on reducers for Redux and Cycle.js, but avoided using them. The Typescript examples are so cumbersome; I'd rather do something else where my code is more understandable.

But in ReasonML it's elegant. It's awesome! I'd choose to use that.

Sure they do the same thing. But as the developer who has to commit to reading and maintaining this code, I know which I'd rather write and come back to in 18 months' time.

undecidabot7 anni fa

Looks like another biased comparison to me. You could easily rewrite the TypeScript reducer example (which fails to compile btw) to be similarly concise while being as safe.

  interface State {
    movies: string[]
  }

  // you may also use { tag: "Action", payload: string }
  // if you prefer something more structured
  type Action =
    | ["AddMovie", string]
    | ["RemoveMovie", string]
    | ["Reset"]

  const defaultState: State = { movies: [] }

  const reducer = (state: State, action: Action): State => {
    switch (action[0]) {
      case "AddMovie": return { movies: [action[1], ...state.movies] }
      case "RemoveMovie": return { movies: state.movies.filter(m => m !== action[1]) }
      case "Reset": return defaultState
    }
  }

  const someAction: Action = ["AddMovie", "The End of Evangelion"]

TypesScript's type system is actually very flexible and advanced [1] compared to most type systems since it had to adapt to the very "dynamic" structuring of JavaScript in the wild.

[1] https://www.typescriptlang.org/docs/handbook/advanced-types....

hajile7 anni fa

ReasonML variants are type constructors. Your example completely eliminated all action creators (constructors). Once you add those functions back, most of the type bloat reappears.

I wouldn't want to work on a project where everyone was creating object literals and passing them to dispatch everywhere.

undecidabot7 anni fa

Yes, I eliminated the action creators. I don't see why they're necessary (maybe there's something about redux I'm missing?). The type constructors of ReasonML cannot be used as functions, so I think my rewrite is fair.

If you insist on having the action creators, they can easily be written as one liners each, which is a lot less bloated than the original example.

  export const addMovie = (movie: string): Action => ({ tag: "AddMovie", movie });

What's the issue with passing object literals? I know it looks a bit hacky and messy, but if it's typesafe (which it is) then it doesn't seem like a real issue.

hajile7 anni fa

No action creator is a serious refactor concern.

Let's say you need to update your function signature with an additional, optional parameter with a default value. You can go to the definition of the action creator and change it. Since you've defined an interface for the action object, finding reducers that use it will be reliable and easy.

If such a creator doesn't exist, you must grep your codebase for every instance of the object and ensure they deal with the optional bit. Murphy's Law guarantees that someone will have decided to procedurally generate the object making finding every instance very hard. Next, you have that reducer lookup, but you don't have a shared interface, so you're stuck in grep land once again to find all the reducers.

Finally, copy-pasting an object literal all over generally results in a larger bundle than reusing an action creator which is smaller and also minifies better.

undecidabot7 anni fa

If the lack of action creators is a serious concern, then the one-liner-each action creator I suggested should be sufficient without adding much bloat. How would the ReasonML example deal with that change though? Can the variant constructors take in optional parameters?

Using Murphy's Law is not very convincing. Even with action creators Murphy's Law guarantees someone would have just constructed the objects manually anyways. Having to grep the tag is not ideal, but it's not likely to be a problem in practice.

I doubt that the bundle would be significantly larger (especially after compression). Using actions creators introduces additional (function call) overhead too (and that would be insignificant as well).

mikewhy7 anni fa

This is what my redux stuff looks like with TypeScript:

    const constants = {
      addMovie: 'movies/addMovie',
    }

    export const addMovie = createAction<string>(constants.addMovie)

    export const reducer = createReducer(initialState, {
      [constants.addMovie]: (state, action: ReturnType<typeof addMovie>) => ({
        ...state,
      })
    })

But this forgoes applying any constraints to `dispatch` / the ability to have one giant union of all possible action types your app supports.

nirvdrum7 anni fa

I'm fairly new to both TypeScript and ReasonML (both within the past month). The author's reducer example closely matches that of the official Redux documentation [0], so I'm not really sure it's biased. But, I could buy that it's not a best practice. Absent anything else, I've been using the patterns demonstrated in the docs. Is there a better resource I should be following?

[0] -- https://redux.js.org/recipes/usage-with-typescript

WorldMaker7 anni fa

The question is as much how exhaustive you want your Redux usage typed, and also how much you want to stick to the "action creator" pattern. A lot of the action creator ceremony is to avoid throwing the wrong types of data to Redux dispatch and make it easier to refactor things when the data requirements for an action change. Typescript handles a lot of that no matter what, and you can lean on the Typescript type system more and the "action creator" pattern less, but it won't look "Redux enough" to more JS-focused developers and that may or may not be a source of friction.

Which is a long way around to: the pattern in that recipe is a good one, it's quite exhaustive in making sure everything is typed, and it's quite familiar to almost any Redux dev you will meet whether they come from JS or TS. You can get away with other patterns/recipes if you want looser typing or "looser redux", based on the compromises you are willing to take, but currently there's no strong recommendation for any such alternative pattern because the common recipe is "good enough", even if it has lots of little bits of extra "ceremony". (Ceremony isn't necessarily a bad thing, sometimes those rituals are helpful in getting your thoughts down and making sure you have everything you need planned out.)

But that's also part of why the example in the author's post is unfair to Typescript. It's as strict on types as the Typescript pattern, but it's "looser redux". It sort of has action creators, but those aren't proper functions from a JS perspective because they are type constructors that don't properly exist in JS. They also don't exactly correspond to/produce the usual sort of "plain JS objects" that Redux expects when dispatching ({ type: "DISCRIMINATOR_STRING", … }), which will worsen and even in some cases may break Redux debug tools/experiences.

(Semi-related, there is a Stage 1 proposal for pattern matching in front of TC39 that would also help reduce the switch case that TS needs to pattern matching closer to the ReasonML example. TS sticking to Stage 3+ proposals now means that it won't get some of these sort of nice to have things until JS does.)

nirvdrum7 anni fa

Okay, thanks for elaborating. I think the part I had overlooked was the variant constructor not being a function. I had mentally mapped that as a `dispatch` call with the variant being the payload. But, yeah, it looks like the author either made a mistake or took a shortcut there.

yawaramin7 anni fa

BuckleScript (ReasonML's-to-JavaScript compiler) has an annotation that automatically creates functions from variant constructors. E.g.:

    [@bs.deriving {accessors}]
    type msg =
    | Increment
    | Decrement
    | Reset
    | Set(int);

    let action = set(2);

undecidabot7 anni fa

I don't have experience with Redux so I cannot comment on that, but I do believe my rewrite is equivalent to the ReasonML example (it should express the same thing and still be typesafe).

While I'm sure the author did not intentionally try to make TypeScript look bad, (imo) they didn't put enough effort to make it look good either. There's a lot more to TypeScript that this post fails to mention. ReasonML is a good language (I think OCaml was just fine though), but TypeScript is good too.

The author says "ReasonML is everything TypeScript tries to be (and a bit more) without all that JavaScript weirdness.", but I strongly disagree. Embracing "all that JS weirdness" is the whole point of TypeScript, and what makes it so successful. Unlike most typed languages, TypeScript (for better or for worse) adapts its type system to the developer's code, not the other way around. This is why its type system is much more expressive than many other type systems including ReasonML's.

quickthrower27 anni fa

I wonder if people (including me) are too afraid to write a little DSL/compiler to get us out of these spots. I.e. use Typescript most of the time, with a DSL for things like reducers. Another thing where a DSL/compiler step would be good is to convert a type into a function that will validate arbitrary JSON (e.g. received on the wire) conforms to the type.

rkangel7 anni fa

The reducer is a case where the functional programming concepts like sum types make a dramatic difference, but they are widely useful across your codebase.

It shouldn't be a surprise that React works well in ReasonML - the first prototype of ReactJS was written in StandardML before the creator ported it to JS (https://reasonml.github.io/docs/en/what-and-why.html)

eatonphil7 anni fa

The most pragmatic reason to use TypeScript is for gradual typing of existing codebases, and that all JavaScript is valid TypeScript. You can introduce TypeScript over time and if it doesn't work out for your group, you can delete the TypeScript-specific annotations and go back to Babel. Or you can keep TypeScript to only specific parts of your application/library.

The most pragmatic reason not to use TypeScript is because it is static-only. And that is easy to forget. That is, within any arbitrary function X you have no guarantee the parameters passed to X are the type specified in TypeScript. There isn't a ton you can do about this except for to code very defensively where it matters.

I've used TypeScript for a number of projects professionally, introducing it among developers familiar and unfamiliar with static typing. I'm not really interested in going back or finding alternatives for now. It is a huge help in development and refactoring without a huge cost.

hajile7 anni fa

In order to interopt, you're going to be using `any` a lot of places. You then have the illusion of sound types. You have all the extra work of sound types. But you do not have sound types and should not be relying on them.

eatonphil7 anni fa

> In order to interopt, you're going to be using `any` a lot of places.

This is not true. Types may be complex and out of laziness (which we do suffer from) there may be `any` types laying around. But you can set up eslint rules that forbid this and turn off implicit `any` at the TypeScript compiler level so you aren't bit by the defaults (which are not nice, for sure).

We have very few `any`'s now in our code and aim to get rid of all of them.

hajile7 anni fa

If you turn off `any` on a gradually-typed codebase, everything will blow up because of the untyped parts. Gradual typing CANNOT be sound unless you dynamically typecheck everything (at which point you are just doing what JS devs do anyway).

eatonphil7 anni fa

> If you turn off `any` on a gradually-typed codebase, everything will blow up because of the untyped parts.

Again, that's not true. A JavaScript file's exports don't have `any` type. Any types during interop are inferred (maybe?) or require bindings. The use of `any` in bindings is your (sometimes valid) choice.

> Gradual typing CANNOT be sound

TypeScript isn't sound [0].

[0] https://github.com/Microsoft/TypeScript/issues/9825

WorldMaker7 anni fa

The new-ish `unknown` type is also very useful for interop work to force adding runtime checks where needed. Some of the Typescript defaults are slowly moving to `unknown` rather than `any` in the strictest compile modes.

siempreb7 anni fa

> and if it doesn't work out for your group, you can delete the TypeScript-specific annotations and go back to Babel.

You are joking right? Ever tried to do that with a large Typescript code base and then of course without the defensive strategy? It's a myth Typescript proponents really enjoy to believe.

> There isn't a ton you can do about this except for to code very defensively where it matters.

Bingo! That's what I always did and served me well on very large code bases. With Typescript I have to write about 20% more code(that can hide bugs too). Advantage? A bit more intellisense than VScode gives already out of the box, and of course for the junior and medior developers so they cannot mess up(types).

wwwigham7 anni fa

It's probably worth noting that that the "intellisense that vscode gives out of the box" is _also_ still delivered by TypeScript. Slap a `//@ts-check` into a js file and you'll find just where the typechecker thinks your jsdoc or usages are lacking or confusing (then maybe add a jsconfig with stricter settings than the default!). If you then fix those, you should be capable of getting _nearly identical_ completions in js and ts (because they really are just variants of the same language).

IMO, TS is all about static enforcement of inline documentation (types), just like how a linter enforces style. You can choose not to enforce it automatically... But at this point I don't get why you wouldn't? I wouldn't argue that style enforcement is best done by hand in the code review stage... So I don't see how further quality checks based on semantics derived from documentation would be any different.

eatonphil7 anni fa

> Ever tried to do that with a large Typescript code base and then of course without the defensive strategy? It's a myth Typescript proponents really enjoy to believe.

You got me. I have not tried to do this in a large TS codebase.

> There isn't a ton you can do about this except for to code very defensively where it matters.

Of course you have this issue in pure JavaScript too. So it's not so much that TypeScript is worse it's just not as big an improvement in this regard as a compile-to-JavaScript language that gives you runtime type safety.

tomp7 anni fa

> Why don’t we have to write types in ReasonML? Because of the powerful type system that allows for incredible type inference.

You mean the restricted type system that allows for principal type inference? ML's type system is much less powerful than Haskell's or Scala's, precisely to allow type inference (e.g. no overloads). The type inference itself isn't very powerful or incredible either, it works just for the exact type system offered by ML.

Obviously nobody likes this, which is why ML offers a number of hacks to allow more powerful type system hackery - e.g. open sums ("polymorphic variants" and also open exception types), HKTs (modules), GADTs, row types & subtyping (objects). Although IMO it would be better to incorporate all these hacks in the core language itself, and only run type inference on the bits where it's possible (but of course tradeoffs would be necessary to avoid running into halting problems etc.).

sweeneyrod7 anni fa

Yes, that sentence should've probably been "Why don't we have to write types in ReasonML? Because of the powerful type inference system". But I think comparing to Haskell is kind of missing the point: you can't use that for front-end web development. Also, I'm not sure what you mean by saying those "hacks" aren't part of the core language.

tomp7 anni fa

By “hacks” I mainly meant that they don’t play that nice with type inference... type annotations are sometimes needed. Also that they were added to the language later, in order to make the type system more powerful.

yawaramin7 anni fa

> ML's type system is much less powerful than Haskell's or Scala's

That's arguable. What's not arguable is that every OCaml compiler runs circles around GHC and scalac in terms of compilation speed. If you like not waiting for the compiler, then you should like OCaml.

ernst_klim7 anni fa

> number of hacks

These are not hacks, subtyping and GADT are part of the core language

> ML's type system is much less powerful than Haskell's or Scala's

Yes, but most of the fancy stuff is located in the module language, and it doesn't lack power, it lacks implicitness (until modular implicits would land).

philplckthun7 anni fa

It's great to see more comparisons and articles about ReasonML and this one is really concise! But I do wish articles were more clear about the relationship between ReasonML, OCaml, and Bucklescript.

> It is also interesting to look at what javascript was generated by ReasonML

This is where BuckleScript should probably be mentioned first. TypeScript is both the name for the language and the tsc compiler, since it's a single project. But with BuckleScript that's not the case.

> BuckleScript is the tool that transpiles ReasonML to JavaScript.

There's also the older js_of_ocaml (JSoO) project, and there's more great Reason/OCaml tooling for native, like esy and dune! It's really exciting, but these small details are rather interesting and it's important to highlight them to avoid confusing beginners.

pkilgore7 anni fa

This is a very good point and I'm glad my other comment isn't the only one bringing it up.

Frankly, of the time I spend reading documentation for my (Web) project right now it breaks down into 5% reason-urql (thanks, BTW, can't wait for 1.0), 10% reason-react, 15% ReasonML, 70% bucklescript.

Even the ReasonML docs that I am reading are pretty heavy on the bucklescript.

k__7 anni fa

As far as I understood is esy uses dune and dune uses BuckleScript, so they aren't alternatives.

brmgb7 anni fa

Sadly, BuckleScript tries to do everything. It ships with a not so-great build system, a good compiler to javascript, a standard library replacement and it invites you to use npm for package management.

Dune is the build system which has become the standard in the Ocaml community. It can use the native compiler or js-of-ocaml to produce javascript. It doesn't support BuckleScript however.

Esy is a tool which allows you to manage your project dependencies. It can pick package from both opam and npm and uses Dune as a build system. It's actually very good.

As Facebook mostly pushes ReasonML towards Javascript developers, they mostly advertise BuckleScript. From what I have seen, the Ocaml community mostly does not care about Reason. They had no issue in modifying tools to support it and noone is going out of its way to hinder it but there is no particuliar enthusiasm towards it.

yawaramin7 anni fa

> there is no particuliar enthusiasm towards it.

There's no particular enthusiasm towards quite a lot of things in the OCaml community :-) there are even some holdouts who don't like or use dune/opam. I wouldn't take that as a point against ReasonML/BuckleScript, which is bringing devs en masse to OCaml who would have never looked at it before.

k__7 anni fa

Understandable.

For JS it's a step forward, for OCaml it seems to be a step back.

blunte7 anni fa

Yes please! I would absolutely rather use ReasonML than TypeScript or JavaScript; so I hope it gains a lot of traction.

I'd still rather use ClojureScript, though.

jecxjo7 anni fa

Can I ask why?

I came from low level language background but my "fun programming" went from Lisps to MLs and now I have difficulties going back to Lisps for projects. Always wanted to like Clojure but never had a need for JVM in anything I worked on.

blunte7 anni fa

My little brain can't keep up with too many things (in short term memory) at once, so more concise and expressive languages are better for me. Also, more sane languages are better (where it's harder to shoot yourself in the foot because you're not (yet) very good at the language).

The homoiconicity of Lisps allow me to think less about syntax. (function <args...>). And reading code is easier, since I see the operations first. Adding more advanced features (via macros) can give you lovely function chaining - threading, piping, etc.

Immutability in Clojure is also good for me because it allows me to learn and forget about functions. Black boxes are great things when you can trust that they are pure functions; just compose bigger black boxes and so on.

I don't do a lot of Clojure these days, but when I was using it professionally I could basically forget about JVM; JDBC was about the only time I interop-ed with Java. If you need some of the good things that JVM offers, great; if not, it's just a hosting environment. Same with Elixir and BEAM (although JVM and BEAM are very different and tailored for different problem sets).

But on topic, given a choice between ReasonML and JavaScript, it seems to me that ReasonML is more thought out, cleaner, safer, and a step in the right direction.

hota_mazi7 anni fa

My little brain can't keep up with too many things either, which is why I only use statically typed languages.

Dynamically typed languages force me to keep type information in my head, and that's just not a good use of my brain when the compiler can be so much better than me at this.

TurboHaskal7 anni fa

I don't want to take a side in the dynamic vs static typing debate, specially since my favourite languages are Common Lisp and OCaml and it would be difficult for me to choose either, but I wouldn't say your argument of having to keep everything on the head holds if we consider the whole array of dynamic language offerings.

Compared to toys like Perl, Ruby, Python, etc., proper dynamic languages (Lisp, Smalltalk) have state of the art debuggers, browsing and discoverability tools and let you backtrack, experiment and tweak your program in an iterative fashion. They are indeed "little brain" friendly and the development experience matches or surpasses those of compilers and classical IDEs.

I am so much more productive in LispWorks than, say, IntelliJ+Java it isn't even funny.

iLemming7 anni fa

- Because of a perfect balance between simplicity, elegance, and pragmatism.

- Because of "true" REPL. Having to be able to evaluate any expression without any ceremony, right from your IDE, with one or a couple of keystrokes is remarkably liberating. No language I have tried gives me that enormous boost when prototyping things. Even refactoring existing code is much faster, because of the tightened feedback loop. Only Smalltalk comes close enough, sadly, Smalltalk has been dormant in years, and I don't think it ever comes back as a pragmatic choice to build a business upon. Whenever anyone retorts "Python has REPL, Ruby too, etc." - it is just sad to see their ignorance. One has to give a heartfelt try to understand what makes Lisp REPL so unique.

- Because it is currently probably the best PL for building web-apps. You get real code-reuse, which even in NodeJS with JS/TS turned out to be an unfulfilled promise. You cannot merely share say data validation logic between back-end and front-end, even in NodeJS, let aside other languages. In Clojure, this turned out to be possible, even though you essentially might be running things on two completely different platforms - JVM and the browser.

- Because you have access to tons of libraries. Java and Javascript interop from Clojure and Clojurescript is lovely. Why re-invent the wheel if someone has already done it?

- Because of the fantastic community of genuinely inspiring, smart, and extremely friendly people. When you work with Clojure/Clojurescript, you always feel a step ahead of the crowd [working in other, more popular PLs]. So many things in different languages got inspiration from Clojure: destructuring, immutability, state management (redux, Elm), React hooks, etc. etc. And at the same time, Clojurists never feel shy and actively "borrow" good things from other languages, libraries, and tools. Clojure community of active members has probably fewer people than work for Google, but they generate and enhance so many awesome and cool ideas.

fulafel7 anni fa

ClojureScript has also been production-quality with lots of users for many years, so it feels safe to use for production projects.

iLemming7 anni fa

After trying things like Elm, Purescript, ReasonML and especially Clojurescript, yes, Typescript does feel like a complete fad. It seems like people get excited about it, ignorant to the fact that there are better alternatives.

a07 anni fa

ClojureScript is beautiful! If only it had types :)

blunte7 anni fa

Rich Hickey is very convincing... he's just great at communicating in presentations, and he has plenty of good arguments why dynamic typing is the best for Clojure (and essentially for real-world problem solving).

My summary is: the extra burdens - tight coupling, code verbosity, custom type propagation for dealing with sparse or varying data - are just not worth the cost.

Also, I don't think there's much real evidence that static typing prevents production bugs. If you're doing decent testing, you'll catch those problems. And if your solution is fewer LOC and easier to reason about, you're more likely to not make type mistakes.

a07 anni fa

I think I don't mind lack types as much in immutable languages. Clojure and Erlang are like that. But they're also both simple languages with simple semantics.

One issue I have with Clojure is when I have to work with nested datatypes to perform transformations. It's just too hard to keep the shape of that data in your head. Types help with that.

Another important thing is modelling business domains with types. By this I really just mean record and variant types and not some advanced type-fu. It really helps seeing what kind of data your application manages.

iLemming7 anni fa

> One issue I have with Clojure is when I have to work with nested datatypes to perform transformations

Out of so many "excuses" to dislike Clojure I've heard over the years, the first time I see something like this, and this sounds wrong for a few reasons. Dealing with nested transformations is not harder or easier in Clojure, it is just different, due to immutable data structures.

Besides, if you need to deal with deeply nested data perhaps it has to be broken down into smaller pieces. Maps are extremely composable in Clojure.

There are libraries that can help you with transformations, you can "walk" the structure, you can use zippers, you can use Specter (a library that I haven't find a use for in over three years of writing Clojure).

Modeling business domains with types is a valid point though. However, I find exactly that is the reason why using Clojure for building real business apps is so much simpler and faster. You are not restricted by the boundaries of whatever type system you use. You don't get stuck in analysis paralysis trying to prototype things in an overly complex type system. At the same time you don't necessarily have to throw the types away. Type systems do help and absolutely have certain benefits, etc. And Clojure has a pretty nice one called Clojure.Spec. In Spec you can for example conform that your function returns specific shape of data. You can use specs to validate inputs, produce human readable error-messages, generate fake data and use it for example for property-based testing. Specs can be shared between different systems, between front-end and back-end, etc.

blunte7 anni fa

>One issue I have with Clojure is when I have to work with nested datatypes to perform transformations. It's just too hard to keep the shape of that data in your head. Types help with that.

And in Ruby or Java, I have the same problem with objects.

No matter what your method of interaction, keeping up with levels of abstraction is hard.

iLemming7 anni fa

Clojurescript HAS types. It has pretty awesome type system - Clojure.Spec. You can use Spec to enforce all sorts of things in your functions. You can use them for data validation, for data generation, for human-readable error messages, etc. Specs can be shared between server and front-end.

dominotw7 anni fa

then it won't be beautiful anymore :D

truth_seeker7 anni fa

Yet another day, yet another incomplete and immature language comparison blog !

I really wish to see some mature blog post which in depth covers the merits of languages in comparison by writing a large enough and workable piece of code solving the identical problem and utilizing all features of individual languages in their specific codebase.

If the author would have been really unbiased about TypeScript he must have mentioned at least 2 (but not exhaustive) following things.

1. Advance TypeScript Types

https://www.typescriptlang.org/docs/handbook/advanced-types....

2. Number of existing JS libraries TypeScript already supports

https://github.com/DefinitelyTyped/DefinitelyTyped/tree/mast...

Most people are just stuck with ES5 and callbacks. I have conducted many (about 12 so far) meetups here in India on new features of ES6/ES7/ES8 and using them to build small full-stack JS/TS assignment with TDD for various kind of senior devs coming from Go, Java, Scala, Python and Ruby.

Common reaction from them I receive very often "We never knew that JS/TS can do that"

a07 anni fa

> Common reaction from them I receive very often "We never knew that JS/TS can do that"

Maybe it's about what you cannot do in ReasonML, and not about what you can do in TypeScript? :)

nirvdrum7 anni fa

The author mentions DefinitelyTyped:

"DefinitelyTyped typings amount is just insane and it will take time for ReasonML to match them."

I agree it would be nice to have an expert analysis of a reasonably-sized application, but that is a rather large undertaking. And frankly many devs aren't experts in two "competing" ecosystems. If you spend the bulk of your time in ReasonML, you're apt to fall behind on TypeScript's recent developments. What you see as bias may just be simple ignorance.

I've just started playing around with ReasonML in the past week, and everything the author has hit upon has been relevant. Writing reducers in ReasonML is a treat. But, the language server isn't nearly as good and there aren't many annotated libraries, so I have to fall back to BuckleScript's JS interop support. The interop system is well-done, but it's extra overhead I wouldn't have to deal with otherwise.

loxs7 anni fa

"it will take time for ReasonML to match them"

Nope, it will never match them if they both keep their current speed. The contrary - the rift will become bigger and bigger.

nirvdrum7 anni fa

I didn't make the claim nor am I supporting it. But the author definitely mentioned DefinitelyTyped as a positive for TypeScript.

loxs7 anni fa

I know. It was not a comment to your words, but to OPs, just to give more info to people not familiar.

nirvdrum7 anni fa

Gotcha. My misunderstanding.

yawaramin7 anni fa

I wrote something like that: https://dev.to/yawaramin/typing-and-code-flow-in-typescript-...

I tried to be as objective as possible, since I am using TypeScript a bit in my day job (main project uses Flow though). Anyway, even when working on the simplest code example for the comparison, I still found more gotchas than I'd have expected.

waltera7 anni fa

I got interested in Reason last year after reading lorefnon's article [1] comparing Reason with TypeScript.

Recently, after evaluating both for a large project we decided to prefer TypeScript primarily because TypeScript's support for intersection types, mapped types and conditional types is really awesome and make integration with javascript libraries a lot easier. As far as I could find, similar things can't be done in ReasonML at all (although I could be wrong on it).

The tooling integration of TypeScript is also really awesome. Besides the usual refactoring, jump to definition support etc. a lot of effort has gone into small things that makes life easier. For example, if you have ctrl+click on a mapped type's property it will jump to the original type being mapped. In libraries like io-ts if you add doc comments on methods which are used to derive the types, the documentation will be propagated to the derived types [2].

I recently found that the author of the above post has been experimenting [3] with babel-macros [4] to facilitate nice type-safe fluent APIs/abstractions which are compiled away to simple readable javascript with zero/negligible runtime overhead and found it a really neat idea. Looking at some of that code, it appears to be a lot simpler than writing ppx macros [5] for ocaml which I very briefly experimented with.

[1] https://lorefnon.tech/2018/05/13/reasonml-vs-typescript-firs...

[2] https://github.com/gcanti/io-ts/issues/201#issuecomment-4347...

[3] https://github.com/ts-delight

[4] https://github.com/kentcdodds/babel-plugin-macros

[5] http://ocamllabs.io/doc/ppx.html

thekillerdev7 anni fa

  Why don’t we have to write types in ReasonML? Because of the powerful type system that allows for incredible type inference.

wat? https://www.typescriptlang.org/docs/handbook/type-inference....

a07 anni fa

Many modern languages support type inference to some degree. The special thing about ReasonML is that the type inference is much more robust and complete.

In practice you don't need to provide any types annotations at all at any point in your program and you should still get the same safety benefits.

Every value in your code will automatically have one single type assigned to it based on how it is being used. When the compiler finds contradictions it will let you know about it. On the other hand, Typescript will try to unify the type to some sort of Any, which is probably not what you want.

dvdhnt7 anni fa

I understand not everyone will agree, but I find this to be a deficiency of ReasonML compared to strict TS.

Types offer inline documentation to developers that come after you. They should make it easier to establish and maintain a mental model.

Obviously, this requires buy-in from all parties, but if the tool itself doesn't encourage buy-in, it is a bug, not a feature.

a07 anni fa

One problem with people selling ReasonML's type inference is that it's not depicting the actual developer experience.

The first thing to note is that you do interact with types to build a mental model! The editor will show them to you as you move your cursor around the code. It will do that for every single value. Just move the cursor over that `requestContext` argument and voilà, it'll show you the type.

Another important aspect is that you still have to define types. Have a person object with a bunch of fields? You do have to type annotate every single field. Have multiple actions to handle in reducers? You need to tell ReasonML in advance what those are using a variant type.

And finally, if you care about composition/abstraction you should provide interfaces for modules. This requires writing types for all functions explicitly to ensure that you are exposing a correct protocol. This is optional, but it helps both the author of the code and the consumers.

Type-inference is just a nice to have feature for the low-level implementation details.

sweeneyrod7 anni fa

Nothing stops you using type annotations in ML, and good developers will do so where it is useful. But it doesn't require them in cases where they are redundant, for instance when you have a parameter `foo` of type `Foo`.

gridlockd7 anni fa

Why do people care about this? Writing type annotations is not that much work, but they make your code more readable.

I can see the argument for it when you have unspellable nested generic types, or when you don't want to write the same thing on both sides of an assignment. Simple type inference like in TS gives you that.

Having really smart type inference makes your compiler slower and more complicated. What's the real-world benefit?

> Typescript will try to unify the type to some sort of Any, which is probably not what you want.

Not really, unless you push the type inference beyond its limits, in which case you should just change your code.

a07 anni fa

Many interesting points! :)

> Why do people care about this? Writing type annotations is not that much work (...)

I personally care about this when I'm prototyping something. Not having to write types means that I can simply write what's on my mind. The benefit of good type inference is that the compiler can still help me highlight any mistakes I made during this process.

Another benefit is that some production code can get very complex. Having to type every single value is just too cumbersome and distracting. It contributes to boilerplate and increases cognitive load, in my opinion.

> Having really smart type inference makes your compiler slower and more complicated.

I would actually disagree with this. First of all, ReasonML's compiler is absurdly fast. No, seriously try it. Sometimes I go and double check the generated JS code just to be sure it actually did anything.

Regarding the "more complicated" part – the only reason why full type inference works is because it is based on a very solid theoretical foundation. It might be somewhat "complicated", but it will never be as complicated as something ad-hoc that needs to account for all inconsistencies that exist in untyped languages like JavaScript.

johnisgood7 anni fa

> It contributes to boilerplate and increases cognitive load, in my opinion.

In my experience with OCaml, I found that knowing the types of my variables reduce the cognitive load of trying to infer the types myself when reading the code, so despite OCaml supporting type inference, I use explicit type annotations almost everywhere.

a07 anni fa

Being a Vim/Merlin user I normally just type `<Leader>t` to see the type of the value under the cursor (this maps to `:MerlinTypeOf` if I recall correctly).

What I do use type annotations for is debugging. If the compiler finds a type error, in some situations it helps adding type annotations to find where the actual error is.

johnisgood7 anni fa

I do use that feature, too, for functions, in Emacs. So in the mode line I see for example: Array.length: 'a array -> int. I find it quite useful.

[deleted]7 anni fa

jecxjo7 anni fa

If you are writing in a Functional paradigm you'll most likely create a lot of small functions that perform very direct actions and then chain them all together to get a more robust operation. When I write Haskell I'll often annotate the larger functions and keep all the smaller ones to auto-generate. They will either determine the type based on the larger function's definition or by operations inside the smaller ones. No point in me writing an extra line for a one line function when its obvious the type.

[deleted]7 anni fa

dmitriid7 anni fa

The problems I ran into with ReasonML (last year) is how scarce the ecosystem is and how incomplete the bindings.

I remember trying to fetch stuff. Fetch wrapper returns data in a type that is not convertible to anything. Ex. it returns Fetch.Uint8ArrayBuffer instead of Uint8ArrayBuffer. Because reasons.

And the compiler was entirely unhelpful. “X provided but somewhere required Y” is the best you could get for type errors. Somwhere... where?

ReasonML is very very early on adoption curve.

jbverschoor7 anni fa

It's simply incorrect..

> Although I didn’t write any types by hand, the arguments of this function are typed. Why don’t we have to write types in ReasonML?

  let sum = (a,b) => a + b;

Is perfectly fine for typescript too. As for:

  let formatName = product => "Name: "+product.name;

So I stopped reading there.

virtualwhys7 anni fa

Why did you stop reading?

The TS version has zero type safety (compiler infers any), whereas the RML version will only accept numeric type arguments.

kadfak7 anni fa

In Reason

    let sum = (a, b) => a + b;

actually accepts only arguments of type int, not any numeric type. The + operator is defined as

    let (+): (int, int) => int;

To have the function accept floats, for example, you would have to use the +. operator like this

    let sum = (a, b) => a +. b;

mcv7 anni fa

I noticed the article had a tendency to compare numbers in Typescript with integers in ReasonML, and I was wondering why.

I guess a clearer distinction between the two can be nice, but then how does that compile to javascript?

yawaramin7 anni fa

ReasonML ints and floats both compile to JavaScript numbers. See https://bucklescript.github.io/docs/en/common-data-types#sha... for a type mapping table.

masklinn7 anni fa

> It's simply incorrect.. Is perfectly fine for typescript too.

The typescript version will be "inferred" as any, and it will refuse to compile if you set `noImplicitAny`.

> So I stopped reading there.

Because you could not handle the truth?

Vinnl7 anni fa

`a` and `b` would explicitly be cast to any, which is forbidding in strict mode, which is TypeScript's default and recommended mode.

virtualwhys7 anni fa

Which is exactly the author's point, in TS you must specify the types (to guarantee type safety), whereas in MLs parameters can be inferred.

koolba7 anni fa

Does ReasonML infer that a type "Product" is the only one in the visible namespace with a "name" property or does it infer at use time that the formatName(...) invocation is valid because the argument has a "name" property?

They're separate concepts. Maybe I want to ensure that I'm receiving a product as it makes no sense to invoke formatName(...) on other things with names like a Cat or Person.

And the generic "thing with a name" one is possible in TypeScript too:

    const formatName = (product: {name: string}) => "Name: " + product.name

masklinn7 anni fa

> Does ReasonML infer that a type "Product" is the only one in the visible namespace with a "name" property

Yes.

> does it infer at use time that the formatName(...) invocation is valid because the argument has a "name" property?

No. OCaml does have a structural object system (https://v1.realworldocaml.org/v1/en/html/objects.html) and it is available to reason, but it's syntactically funky (https://reasonml.github.io/docs/en/object) and as far as I can tell TFA does not use it.

> They're separate concepts.

Yes. Which is why OCaml (and thus Reason) separates it[0] from the nominative "structures".

> Maybe I want to ensure that I'm receiving a product as it makes no sense to invoke formatName(...) on other things with names like a Cat or Person.

You're really deep into this strawmanning thing.

[0] pretty completely, you can't use nominative types in a structural context, they are not compatible. In fact structural types are sets of methods, something which doesn't exist on the nominative side.

koolba7 anni fa

I didn’t mean it as a straw man. I’m not familiar with ReasonML at all and meant to illustrate the example.

arthurbrown7 anni fa

They're different concepts with different ways of being expressed in OCaml.

In this case it truly is a Product and if you want to reuse a field name you'll need to enclose that type in a module.

Row polymorphic -- "thing with a name" -- is possible through the object system which is accessed through a different syntax, and works like go interfaces in practice.

dmitriid7 anni fa

IIRC if there are several possible choices, the compiler will complain (with a fairly incomprehensible message), and you will have to explicitly provide the type.

And this happens all the time.

coldtea7 anni fa

>So I stopped reading there.

At no point in time anything insightful preceded or followed those words...

Illniyar7 anni fa

>It is also interesting to look at what javascript was generated by ReasonML ``` function updateName(product, name) { return [name, product[1]] } ``` Records in ReasonML are represented as arrays. And generated code looks like a human wrote it if humans could remember indices of every property of every type like a compiler does.

This seems like a massive headache, what about JSON? or accessing dictionaries? Do you need to parse every js datastructure to a ReasonML record?

pkilgore7 anni fa

No. Reason (bucklescript really) maps to the full range of a data structures. So use a dict as a dict, a record as a record, an array as an array...etc. It will map back to what makes the most sense in the JS world.

As opposed to JS, where really all these things are overloaded onto the same data structure ( object ).

pkilgore7 anni fa

But to be clear, yes, interop with regular JavaScript and JSON is a bit of a pain in the butt. Bucklescript has lots of helpers but it's definitely the place where the soundness of the type system has broken down for me in the past.

loxs7 anni fa

After one year of OCaml/ReasonML and after that one year of TypeScript, I will not go back to Reason.

1. TypeScript has a better (more practical) type system (for the task of writing a WEB UI and interop with JS).

2. TypeScript is actually usable by people who do not have a PhD in type theory.

3. TypeScript has tools. This is a huge difference.

4. It's faster and cheaper to actually develop a product in TS than in Reason/OCaml.

5. Yeah, TS lets through more bugs, but it's actually just a small blip on the radar.

In practice, TS makes it quite possible to get all of the benefits that OCaml claims without actually paying any real price.

edit: formatting

edit2: I still do use and love OCaml (on the backend), just not fooling myself I can actually ship a real (and big) web UI project using it.

kangar008577 anni fa

I understand it’s a major sin to ever talk about syntax but a lot of ReasonML reads like someone’s cat walked across the keyboard

This project is interesting & the folks evidently involved & advocating invested a lot time + smarts but why bother with all this new cognitive load & new universe of subtle problems (bucklescript, interopt, external libs, etc)?

sweeneyrod7 anni fa

It's a matter of taste. Syntax isn't an issue if you're used to OCaml (which arguably has worse syntax -- semicolon as a list separator!) so there's no problem for that section of the userbase. I don't know how people coming from JS generally feel.

kangar008577 anni fa

(Not trolling, no flamewar but asking out of curiosity)

Is ES6 + Typescript in 2019 really so awful that all this effort is required to build rich applications for web?

Perhaps ReasonML is like “the big guns”, but what situation makes it necessary/important/better to use?

jasim7 anni fa

This might shed some light: https://www.harigopal.in/talks/2018/jsfoo

cjdell7 anni fa

I tried really hard to use ReasonML about a year ago but ran into a road block with the lack of async/wait (or equivalent) syntax. It's really cumbersome to have to go back to chaining callbacks again.

bgorman7 anni fa

You don't have to chain callbacks, you can use monadic Future libraries. Look into "Future" for bucklescript, or "Lwt" for reason-native.

bontaq7 anni fa

generators are also pretty awkward, which is annoying if you've gotten used to redux-saga

redleggedfrog7 anni fa

I think where these comparisons go wrong is tooling. I don't give a rodent's behind how nifty your new language is unless you've got excellent tooling, particularly, an easy to use step through debugger (and no, you still need a debugger when functional programming).

The second I think I'm doing printf() debugging I'm out.

Note, I'm only referring to actually getting work done here - academically, or if you're just dinking around, then it's all good.

loxs7 anni fa

This, and also proper out-of-the-box IDE for refactoring, completion etc. Reason/OCaml do have the proper IDE, just not out-of-the-box.

rictic7 anni fa

I love languages, and I want to use languages with powerful, sound type systems on the web, but I don't want to do it at the cost of shipping much larger amounts of code, making for a slow initial render.

A vanilla JS todomvc app is 10KB of JS (plus some analytics code for some reason): http://todomvc.com/examples/vanilla-es6/

The production build of the ReasonML todomvc app ships 5x as much, 56KB JS.

How much of that is a static runtime cost, and how much is just the cost of translating ReasonML into the corresponding JS? An extra 40KB isn't great, but it's not a dealbreaker. A shipping 4x-5x as much JS would be, in a lot of cases.

chenglou7 anni fa

Eh where did you see that? ReasonReact is runtime-free, unless you’re explicitly using some of the extra helpers.

rictic7 anni fa

I ran the production build of https://github.com/reasonml-community/reason-react-example/t... and ran the JS bundle through gzip -9 to get the 56KB number.

chenglou7 anni fa

Oh man, that repo's stale. The official instructions are here: https://reasonml.github.io/reason-react/docs/en/installation

yawaramin7 anni fa

If the ReasonML TodoMVC app was using the same basic approach as the Vanilla JS app, there is no way it would be shipping 5x as much code. ReasonML code compiles pretty much 1-to-1 to JavaScript. It does pull in a bit of a runtime if you use some standard OCaml libraries, most of that should be quite easy to eliminate with a good bundler.

devmunchies7 anni fa

doesn't say this in the post, but ReasonML was created by the same developer that created React. Which would indicate it is good for generating UIs in the browser but not necessarily all the other stuff JS does (interacting with browser APIs and stuff)

I'm a big fan of OCaml, so I would like to see more developers dogpile on a functional UI language like ReasonML so it improves.

bkonz7 anni fa

While I can't speak specifically to ReasonML, I have used Ocaml and Typescript extensively in https://www.jeroo.org/beta.

I used Ocaml to write the a (simple) custom compiler framework, which gave me the benefits of better type safety than Typescript.

Typescript was used with Angular to create everything else (the custom-bytecode interpreter and user-interface. Typescript gives me the advantage of good interop with Javascript libraries, mainly CodeMirror for the editor.

The interop with Ocaml and Typescript was pretty good. I just exported the Ocaml as a Javascript module using Js-of-ocaml with one exported function that starts off the compilation. Then it returns a list of a custom instruction object, which acts as a 5-tuple with all of the instruction fields.

city417 anni fa

The article mentions a non handled case in a switch is flagged in Reason but not TypeScript. That is technically true, but you can flag an unhandled case by adding a default case which takes advantage of the never type

https://stackoverflow.com/questions/39419170/how-do-i-check-...

loxs7 anni fa

This isn't needed any more. Modern TS enforces switch exhaustiveness out-of-the box (if you provide the proper union type, of course).

sikan7 anni fa

This is not true: https://www.typescriptlang.org/docs/handbook/advanced-types....

loxs7 anni fa

Yeah, I always use strict and specify return type. IMO, still counts.

city417 anni fa

Oh awesome, I didn't know that. Thanks for the heads up.

[deleted]7 anni fa

lucaspottersky7 anni fa

> "And while having that familiarity with JavaScript is nice, it means that every quirkiness that we love and hate about JavaScript is still there in TypeScript

> "... ReasonML is everything TypeScript tries to be (and a bit more) without all that JavaScript weirdness."

yeah, but what makes the author think that __INSERT NEW LANGUAGE HERE__ would not have other 'quirkiness'?

philliphaydon7 anni fa

I’m not a fan of TypeScript, and never heard of Reason, but this post makes me like TypeScript more. I prefer the fact it’s more explicit and less magic.

The examples in TS are very easy to understand where Reason just looks like magic and I have to think more about what it might be doing. I don’t see a benefit to Reason over vanilla JS.

/opinion

wry_discontent7 anni fa

That basically amounts to "I have learned Typescript and not Reason, therefore Typescript is better."

I'm not a Reason pro, but it doesn't look magical to me. It seems just as explicit, and actually more so in the reducer example.

crimsonalucard7 anni fa

You need to study ML based languages like Haskell and reason to see why reason is actually more explicit then type script. It takes some effort but in the end you'll have a better understanding of programming in general.

Typescript is missing the Variant type primitive so it has to be written in a roundabout way to imitate that primitive (and it most likely isn't type checked correctly either). The extra code you are writing in TS is not explicit... a better term is obfuscates.

Rapzid7 anni fa

F# tackles this disconnect between working on the code in an IDE and reading code with an interesting documentation system: https://fsprojects.github.io/FSharp.Formatting/metadata.html . Mouse over the code :)

devmunchies7 anni fa

i hate those tooltips when they get in my way. I wish they only showed up if you hold control + hover or something like that.

eptcyka7 anni fa

I'd argue that's because ReasonML/Buckle is a completely different language whereas Typescript is a superset of JavaScript. I don't believe that one is inherently more legible than the other, but you might have trouble reading Reason if all you know is C-style languages.

Can_Not7 anni fa

Would love to use typescript or ReasonML with something other than react, like svelte.

muglug7 anni fa

I get the sense that ReasonML exists because some smart people see "JavaScript developer" as a pejorative.

While its abstractions make plenty of sense, its distance from JavaScript makes it incredibly unappealing to the average developer.

a07 anni fa

This kind of comments make me really sad. Most ReasonML developers are actually "JavaScript developers".

ReasonML was specifically designed for JavaScript developers. Being JavaScript-friendly is in it's DNA really. I even see ReasonML a language that was specifically designed to work with React.

I can understand why you would feel this way though. I think the main problem is that ReasonML introduces new concepts that simply do not exist in JavaScript. Learning those concepts is hard. But if it wasn't hard, would you be learning anything or just writing JavaScript in a slightly different way?

Are there any specific examples of things that look too "distant" from JavaScript?

I'll finish this by saying that ReasonML will make you a better JavaScript developer. As will probably learning any other language that challenges the way you think.

muglug7 anni fa

> I'll finish this by saying that ReasonML will make you a better JavaScript developer. As will probably learning any other language that challenges the way you think.

I wholeheartedly agree! But a lot of people don't want to be challenged by the language when there are already plenty of other challenges in their personal and professional lives.

With TypeScript you don't need to think half as much, and the thing your boss generally cares about (whether the feature shipped) gets done.

yawaramin7 anni fa

> With TypeScript you don't need to think half as much

That seems a bit dangerous, to be honest. TypeScript has an unsound type system. If you don't think carefully, you might end up shipping runtime type errors.

azangru7 anni fa

Why should we concern ourselves with psychological processes of the mythical average developer? The question is, whether this language is appealing to you.

muglug7 anni fa

I suppose if you're working on a small pet project that nobody else is going to see. If you're working on something with a bunch of other people you're likely to care more about what the mythical average dev thinks.

lucasmullens7 anni fa

For the "Null, undefined vs Option" part, it's feasible with a lint rule to ban null throughout your code. Might not work for third-party code, but Reason can't work with that anyway.

stephen7 anni fa

I inherited several Flow codebases, which is from the same guy/group as Reason at FB, and attempted to do the same goal of "bah explicit type annotations, let's infer everything".

This nearly ruined the codebases and we ended up converting them all to TS because:

A) tactically, flow's global inference sucked, so many things that devs thought were typed, were not. I get they're trying a do-over and using OCaml to solve that this time around, which I agree is fundamentally a better approach.

B) strategically, explicit type annotations (i.e. at method boundaries) is a _feature_ for dev readability and comprehension and not a burden to be avoided. I get that Flow/Reason _can_ add these type defs, but many new devs see posts like this, think "nice, less chars to type!", and now write a 100k LOC codebase with a pervasive lack of any type defs.

Tldr, I think TS's explicit types at boundaries is actually best practice for programming-in-the-large.

toolslive7 anni fa

> explicit type annotations (i.e. at method boundaries) is a _feature_ for dev readability and comprehension and not a burden to be avoided

The problem is not the type inference, but tooling. If your IDE can, when you're coding can 'show-type-at-point' and your online github style code review tool shows the type of any expression, argument, ... when you hover over it, you no longer have this problem.

spoiler7 anni fa

A was a bug. Previously Flow when certain errors happened internally, Flow would "demote" a type into `any`, but that's been fixed for quite some time now.

k__7 anni fa

Anyone knows good ReasonReact tutorials where people build a full app?

yawaramin7 anni fa

Yes–check out this excellent blog series https://dev.to/seif_ghezala/reasonml-for-production-react-ap...

cztomsik7 anni fa

javascript/typescript is great if you don't know what you're going to eventually come up with but you need to iterate fast and keep it high-level with lots of TODOs and uncertainties which would otherwise have been hard to type.

if there's anything I really, really hate it's when I'm just trying something and keep getting compiler errors for things I'm not even interested ATM.

indeyets7 anni fa

I wonder how ReasonML is positioned against Flow. Both seem to fill the same niche at facebook (and both lack marketing resources of TypeScript).

duckqlz7 anni fa

Great comparison I was interested in reasonML and find comparisons like these very helpful. Still sticking to ELM for my personal projects!

crimsonalucard7 anni fa

ELM really needs type variables and type classes.

hashbig7 anni fa

Anything declared in Elm is immutable so types on constants become way less relevant.

crimsonalucard7 anni fa

Type variables are not what you're thinking.

   add :: Int -> Int -> Int
   add a b = a + b

   add2 :: a -> a -> a
   add2 c d = c + d

1st function adds integers. 2nd function adds anything that can be added. For example: add2 [1,2,3] [4,5,6] evaluates to [1,2,3,4,5,6]

The 'a' in the second function is a type variable.

rambossa7 anni fa

How is dev ex with Reason? Intellisense?

a07 anni fa

It's ok. There's pretty good support for linting and code completion. The plugins are fast and have a rich feature set.

Take a look at this: https://marketplace.visualstudio.com/items?itemName=jaredly....

The only problem that I have found is that in some situations it doesn't report errors correctly when adding new dependencies. Refreshing the window or rebuilding the project usually helps.

On the other hand, the compiler feels very solid. It can be annoying in the beginning because of how disciplined the code needs to be, and the error messages can be hard to understand.

After getting used to that, the dev ex is really smooth specially during complicated refactoring, the compiler and the IDE make things almost boring.

rammy12347 anni fa

when comparing the language construct, usually adoption is hindered by tooling. You should also compare tooling. that said, this is an excellent article trying to reason out why we should start using ReasonML

gridlockd7 anni fa

None of these are worth switching to a fringe ecosystem for.

The compile-example is misleading. Clean build times don't really matter. Iteration times with "tsc -w" would've likely been well under a second.

The boiler-plate in the redux example could be reduced, but redux itself is extremely boilerplate-heavy when written in this explicit style. It would be interesting to see how the ReasonML typesystem gets in the way of metaprogramming.

sikan7 anni fa

At work our TS project with a thousand files takes 30mins on CI, incremental save takes at least 20 second. Half of the time makes the machine run out of memory.

Bucklescript can have a clean build of 1.2k files project in under 4 seconds! https://twitter.com/bobzhang1988/status/1160846763747508224

gridlockd7 anni fa

Thanks for the data point. Those aren't the same thousand files though.

If your project has a thousand source files of any programming language, it's probably time to quit and join a younger company.

a07 anni fa

One place where clean build times do matter is in the CI. Having very fast builds and tests is great for speedy deployments.

gridlockd7 anni fa

Why? Does your CI do a clean build for every test?

yawaramin7 anni fa

Most CIs do clean builds for every PR, merge, and deploy ... that adds up to a lot of time.

crimsonalucard7 anni fa

In mathematical theory, the variant type is actually the theoretical opposite of a "struct" type. Mathematicians know this through the functions that apply to each type.

Simply inverting the direction of functions that describe a "struct" type creates a structure that exactly describes a variant type.

The theory points to opposites but language writers, unaware of theory, more often than not leave out the critical primitive that should be intrinsic to all programming languages.

Allower7 anni fa