Recursive SQL Queries with PostgreSQL(towardsdatascience.com)

90 pointsby MartinHeinz6 anni fa24 comments

https://towardsdatascience.com/recursive-sql-queries-with-postgresql-87e2a453f1b

24 comments

It's worth throwing into the mix that CTEs can be an elegant solution to more than just recursive queries. I've used them to "refactor" out common parts of queries where the same subtable is referenced multiple times in the same query.

So instead of

   select something from x join y on x.foo = y.foo and blah = 'cheese' where some_complicated_join_conditions ...
   union
   select something from x join y on x.foo = y.foo and blah <> 'cheese' where -ome_other_complicated_join_conditions

...you can have

   with nerk as (
     select something from x join y on x.foo = y.foo
     where
       hopefully you can find some common part of the complicated where clauses
   )
   select something from nerk where blah = 'cheese' and something
   union
   select something from nerk where blah <> 'cheese' and something_else

...obviously a trivial example but you get the idea. When I tested this on postgres (some time ago) this was very significantly faster for my use case.

It also helps in use cases where you want to allow user-defined filtering and ordering logic controlled by a gui. You can put your basic query as the CTE and then have all the user-controlled bits and pieces in the final select and they don't get mixed up together.

cbcoutinho6 anni fa

I do this as well and consider CTE's just a macro that is expanded when executing the query - similar to an inline view.

I've run into issues before with systems where the result of a CTE is so large that it is actually advantageous to instead place it into a temp table to avoid re-fetching the data at each invocation. Sometimes that can be better than a CTE for this use case - YMMV.

jimktrains26 anni fa

While the constraint was recently relaxed somewhat in postgres 11 or 12, it is worth noting that a cte can be an optimization barrier. This means that a cte isn't just a cookie cutter replace operation. Usually this is ok, especially if the cte result set is on the smaller side, but it's just something to keep in mind.

seanhunter6 anni fa

Optimization in postgres (like all databases I've used) is super counter-intuitive and baffling at times and the only real way to be sure of anything is to try it yourself on your own data and see (and repeat the test whenever you do a major db upgrade). As an example which may well have changed but definitely was the case the last time I tested (which is circa pg9) it used to be the case that using ANSI join syntax would make a query 5-10% slower. ie

   select a.foo, b.bar
   from a, b
   where a.b_id = b.id 
   and a.something ='blah'

would be reliably 5-10% faster than

   select a.foo, b.bar
   from a
   join b on a.b_id = b.id 
   where a.something ='blah'

even if everything was indexed etc.

Conversely, projecting off unnecessary columns used to result in a big speedup. ie

   select a1.foo, b.bar
   from 
      (select foo, b_id from a where something='blah') a1
   join b on a1.b_id = b.id

used to be significantly faster than either of those queries on wide tables.

edit: few typos and additional example added

jimktrains26 anni fa

I'm not disagreeing, but it also helps to look at the EXPLAIN output (including things like width and rows) for queries to better understand what's actually happening. That helps build intuition, but like you said, major version releases can change that behavior. Postgres is usually pretty good at documenting those changes, though.

seanhunter6 anni fa

100% agree.

anarazel6 anni fa

There has to be more to the situation than the aove. Unless you configured join_collapse_limit to be way lower than the default, the JOIN query just gets transformed into the former.

Any chance you either had a lot more tables joined together, or you were seeing caching effects?

> Conversely, projecting off unnecessary columns used to result in a big speedup.

That also just gets inlined, unless you have more than from_collapse_limit items in the from list. And we push down the list of columns we actually need, so there's nothing this would improve anyway.

Wicher6 anni fa

Recursive CTEs are sublime, not only for orthodox trees: combined with XMLTABLE you can even use it for recursively descending XML, normalizing it into tuples of ([array, of, tag, names], value). Then you can join on that table/view using simple and easily composable autogenerated SQL expressions instead of Xpath. And you can string-join the element path with '/' to get an Xpath expression that would get you a value from the source XML, if you need to! I use this a lot to work with XML, even exposing it through an ORM (Django's in my case). You can do a similar recursive descend on JSON.

st_goliath6 anni fa

SQLite also supports recursion: https://www.sqlite.org/lang_with.html

I'm not sure if MySQL does now, but about a decade ago when I did my bachelors, in the database course we switched from doing exercises in MySQL to PostgreSQL when recursion came up. Our local university has a database research group headed by a professor who has a fetish for recursion, so we spent a good chunk of time shoehorning graph and tree problems into SQL. As the story goes, thanks to his constant pestering, DB2 supports quadratic recursion.

Izkata6 anni fa

Definitely measure the performance with sqlite though. I recently found one of my recursive queries had really bad performance compared with using a temporary table, because the CTE didn't create an automatic covering index. Had to separate it out into two queries (which changed it from something like .3s to .009s + .001s).

SQLite6 anni fa

If you will kindly send your problem query to the SQLite developers, we will do what we can to improve the query planner to make it run faster.

Izkata6 anni fa

Posted (and reran the numbers with some unnecessary transformations removed): https://sqlite.org/forum/forumpost/e4091b433a

I may have misremembered since I did go a bit wild on this query (done while learning about recursive queries), but pulling the subquery into a CTE doesn't affect the query plan.

maweki6 anni fa

An important limitation is that the reference to the recursive table is only a reference to the newly added tuples and you're only allowed to reference the single recursive table once. This forbids, for example, having a NOT IN of the recursive table besides the join you wanted to do anyways and it has some unexpected behavior (as you may think you reference the whole recursive table but you don't).

Limiting to linear recursion makes it less powerful and harder to program than Datalog, but the algorithm is sufficiently fast. Which is probably necessary as the recursive table is not indexed.

Also you're not only allowed UNION but also UNION ALL without a duplicate check. There every new result has to be strictly smaller than the last or you lose termination. Together with the strange referencing method to only the new tuples, this is quite a footgun.

But not to be a spoilsport, we still teach it at our University for some problems that would have required external programs to calculate the fixpoint. You just have to know the limitations which the article does not explore.

radiowave6 anni fa

It's been a few years since I ran into this, but if memory serves you can work around the limitation of only referring to the recursive table once by joining a lateral subquery into the recursive part of the query. Inside the subquery you're then free of this limitation.

hansvm6 anni fa

You can also use an inner cte to copy the original table and use it as often as you like.

maweki6 anni fa

Thank you for this tip. This sounds horrendous in terms of maintainability but nice to see it's possible.

radiowave6 anni fa

I just found it in my notes. I don't think it looks too bad - everything you were going to do in the recursive part, you just do inside the subquery instead.

  WITH RECURSIVE my_cte AS (
    SELECT foo, bar FROM whatever
    UNION ALL
    SELECT (s).*
    FROM my_cte, LATERAL (
      SELECT ... -- refer to my_cte multiple times here
    ) s
  )

PaulMest6 anni fa

My team just started working on a project that will work with hierarchical data. Have you looked into ltree[0] at all? Any thoughts on when that would or would not be beneficial?

[0] https://www.postgresql.org/docs/current/ltree.html

maweki6 anni fa

Use it. I think you get stronger guarantees on correctness and performance.

Not every of those path queries are easily implemented using recursive CTEs.

cyborgx76 anni fa

With all this talk about nested trees of managers and subordinates, I'm curious if it would be possible to trick a HR department into introducing a loop into the structure, effectively creating a group of people that is no longer subordinate to the CEO/Head of the Company.

lowdose6 anni fa

Thats exactly what HR did in many companies.

cyborgx76 anni fa

You got a link to any tales about this happening? Would love to read about it.

pgt6 anni fa

Datalog Rules are better suited to recursive queries than SQL: http://www.learndatalogtoday.org/chapter/8

bionhoward6 anni fa

FOREIGN KEY (manager_id) REFERENCES employees (id) ON DELETE CASCADE

sounds dangerous for job security