I Blog with Raw HTML(devpoga.org)
devpoga.org
I Blog with Raw HTML
https://devpoga.org/i-blog-with-raw-html/
136 comments
Real programmers use octal not hex.
What can I say, I modernised. It feels like an age since I last toggled in a bootloader through a front panel. I'm also anticipating a bit of snark (pun intended) from the folks still twiddling data on their magnetic drums using an iron needle. It's all in good humour though, we continue to get along because I didn't switch to SVR4.
I know you’re being facetious, but there was a time that I did toggle a boot loader in with switches on the front of a mini computer. Now I feel super old.
You’re not alone. I too am ancient enough to have done the same. PDP-8 at my hometown university computing centre. At least half my original comment held a grain of truth, as a matter of fact. Including the dd/sh HTTP server (hi Claudio!)
And only use computers they built themselves from transistors made from silicon they mined using hand-made, wooden tools... etc.
Too hackerish.
Real professional software developers only use the subset of HTML which ISO standardised in 2000 as ISO/IEC 15445:2000 with additional validating constraints. Published via SOAP ands WS-*.
Real professional software developers only use the subset of HTML which ISO standardised in 2000 as ISO/IEC 15445:2000 with additional validating constraints. Published via SOAP ands WS-*.
You use a file system? I manually flip bits in my magnetic core memory
I think you should just use Wordpress instead. It would be easier.
You're doing God's work.
This is the comment I came here for.
> the blog you’re reading now is written in raw HTML, with md-block for markdown, and highlight.js for syntax highlighting.
That doesn't sound like raw HTML to me. I write my own blog in raw HTML with a text editor (BBEdit), no JavaScript, and no server-side script either.
For good measure, I also write my RSS feed in raw XML with a text editor.
That doesn't sound like raw HTML to me. I write my own blog in raw HTML with a text editor (BBEdit), no JavaScript, and no server-side script either.
For good measure, I also write my RSS feed in raw XML with a text editor.
For me, it blinked some markdown on the page briefly before formatting appeared. So, no, it's not raw HTML.
For what it's worth, I don't think there's anything wrong with that. My blog is written in markdown. HTML is a deeply unpleasant thing to write blogs with.
For what it's worth, I don't think there's anything wrong with that. My blog is written in markdown. HTML is a deeply unpleasant thing to write blogs with.
Am curious. How is this raw HTML if you're using markdown?
But on the other side, writing in raw HTML is a fascinating topic I've been very intrigued by. http://john.ankarstrom.se/html/ is a very inspiring post.
But on the other side, writing in raw HTML is a fascinating topic I've been very intrigued by. http://john.ankarstrom.se/html/ is a very inspiring post.
I write my blog in markdown and serve it to the browser as such, with a one-liner javascript include to render it in browsers that support that. I like that the "canonical" post source is preserved and served (you can read it with telnet, in a pinch).
Yeh but do you say you write your blog in markdown or 'raw HTML'?
had a look and I like it. More "raw markdown" (what the OP uses too) instead of HTML in web publishing is a good thing - basically because xml syntax is not how humans want to write.
This, combined with git forges pages concept or tilde user accounts makes for nice corners in the webs.
This, combined with git forges pages concept or tilde user accounts makes for nice corners in the webs.
Sure, but writing in Markdown isn't how humans write either.
Markdown is the least bad way for humans to write, IME. It definitely beats handwriting, it definitely beats every other markup/formatting language, and subjectively I find it nicer than MS Word style "WYSIWYG" formatting although that part is maybe more arguable.
I don't know what I'm more offended by, the implication that writing 'raw' HTML is some noteworthy retro skill, or the fact the blog isn't actually written in raw HTML at all, but in Markdown.
I had the same thought. 72kb of JS dependencies from some CDN to render that "raw HTML". If you are going to claim to be a purist, try actually being one first.
Apparently "raw HTML" now means "just enough HTML to load a Markdown renderer into a JavaScript virtual machine". Amazing.
I blog with raw HTML too, but I don't blog about it. The "blog about the tools I use" tarpit is somewhat unique, it's like if online chefs were obsessed with creating knife and fork recipes.
What you've never seen a chef on a cooking show geek out about his favorite knives and pans?
I think that’s misunderstanding the point they’re making. It’s not talking about knives, it’s talking about knife recipes. As in, “I use the pairing knife to cut the salmon” which is definitely similar to “I use HTML to write my blog”.
Maybe if it was a unique, special pairing knife, sure. That could be a real conversation. But it’s just a normal pairing knife. You’re just announcing you make the thing, with the other thing that makes the first thing.
Maybe if it was a unique, special pairing knife, sure. That could be a real conversation. But it’s just a normal pairing knife. You’re just announcing you make the thing, with the other thing that makes the first thing.
> However, even a static site generator will deprecate some features one day
No? You don't need to upgrade to the version that deprecates. Besides, what features are you using with such a simple blog the are at risk?
No? You don't need to upgrade to the version that deprecates. Besides, what features are you using with such a simple blog the are at risk?
I used wintersmith.io. At some point it was abandoned and eventually the node version needed was old and other stuff associated with it. It became a hassle.
"the node version needed"
Ahhh...
Ahhh...
Writing raw html and wiring it yourself is a hassle, how is not upgrading node a bigger one?
Besides there are SSGs that are a single binary
I faintly remember when the kernel config asked you if you wanted both `a.out` and `ELF` support.
No one says that single binaries compiled in the last 10 years might be usable without a VM in another 10 or 20 years.
And no, 20 years for the same blog to exist isn't even so rare.
No one says that single binaries compiled in the last 10 years might be usable without a VM in another 10 or 20 years.
And no, 20 years for the same blog to exist isn't even so rare.
If you make such risks up, then no one says that html will be readable in the same way in 20 years (which is already kind of true as you have a lot of old blogs with awful layout on mobile)
But there is an even easier one - nothing will happen to your html built files of 20 years, they'll remain... static.
The worst is you'll go to updating your lovely html by hand, but you would've saved yourself wasting 20 years doing that instead of using a better system.
But there is an even easier one - nothing will happen to your html built files of 20 years, they'll remain... static.
The worst is you'll go to updating your lovely html by hand, but you would've saved yourself wasting 20 years doing that instead of using a better system.
I promise you, HTML is not a hassle... It's markup. You describe the page, and then... you're done. And if you don't use weird, niche tags, it'll work basically forever.
This is a patently false promise. Yes, it's markup, but a bad one un-ergonomic-suitable for direct human consumption. Even the author of the blog understands it and uses alternatives
> with md-block for markdown
> You describe the page, and then... you're done
Unless you want to re-describe something, of course. Maybe sort a column in a table...
> with md-block for markdown
> You describe the page, and then... you're done
Unless you want to re-describe something, of course. Maybe sort a column in a table...
This is not a Raw HTML blog. You're sending markdown to the browser and then a bunch of javascript to convert that mark down into HTML...
That might be the reason why this has been submitted (i.e, the author doesn't know what "raw HTML" is).
Ha! I just did exactly this as a joke [1]. Even using the default Apache’s directory listing page to give me the list of articles
[1] https://lizzy.js.org
[1] https://lizzy.js.org
Javascript loaded from Cloudflare! What's the chances Cloudflare (current age: 14.5 years) is still around in 20 years and still providing this Javascript (current age: 30 years) file (current age: beginning of Israel's current bombing of Gaza)?
And another one loaded from the website of the creator of that module! Last commit 2 years ago. Created 1 year before that. Will it continue to exist?
And another one loaded from the website of the creator of that module! Last commit 2 years ago. Created 1 year before that. Will it continue to exist?
Blogging in raw html means you fire up emacs, tramp to the blogs index.html find the last closing p tag and underneath put the post headline and timestamp and an opening p tag on the next line and you are off to the races.
Of course opening the index in tramp, putting the heading, timestamp and p tag goes into a function or paused kbd-macro so it fits into Mx blogthis
Of course opening the index in tramp, putting the heading, timestamp and p tag goes into a function or paused kbd-macro so it fits into Mx blogthis
Blam! <blows smoke off gun barrel>
You do it just like that. But with vi.
You do it just like that. But with vi.
Lol. Once you start learning about Elisp and the Emacs platform, it's so trivial to write up scripts like this. Mostly due to the fact, that every command is also a function, and the whole state of the software is accessible. I have a bunch of ebooks (pdf) in a folder, and on macOS, I created a quick workflow that fuzzy search them (file name) and open the selected one using Alfred.app. I created the same feature for the shell using fzf, and the emacs version (using consult-find) was equally short.
What do you mean by raw html ??
Using js and stylesheet in your head tag, well you didn't mean pure html only site
I think it means literally writing the blog post directly as HTML, instead of as something that will then be turned into HTML tags (like Markdown).
Yeah, I was disappointed to see the site come up looking one way then quickly re-render in another aesthetic.
I literally blog with raw SGML. Each post comes with a handful per post ENTITYs for that post's common abbreviations and links. Unlike inopinatus's comment, I do keep up with "modern" standards, which is why my posts conform to the "ISO/IEC 15445:2000//DTD HyperText Markup Language//EN" doctype, the latest HTML standard approved by the ISO.
Blog content is assembled via various SGML entities includes into a prehtml file of "-//ISO-HTML User's Guide//DTD ISO-HTML Preparation//EN" doctype per ISO 15445:2000 recommendations[0]. This is all processed with osgmlnorm through a somewhat simple Makefile to generate the resulting HTML files.
[0] https://rogerprice.org/15445/UG.html#DOCPREP
Blog content is assembled via various SGML entities includes into a prehtml file of "-//ISO-HTML User's Guide//DTD ISO-HTML Preparation//EN" doctype per ISO 15445:2000 recommendations[0]. This is all processed with osgmlnorm through a somewhat simple Makefile to generate the resulting HTML files.
[0] https://rogerprice.org/15445/UG.html#DOCPREP
I don't know what kind of competition this is, but I'm waiting for someone to say they blog in XML with XSLT.
As requested:
http://www.blogabond.com/xsl/vistacular.xml
The upside is that the entire html page is content. I defy google to not figure out what to index here:
view-source:http://www.blogabond.com/xsl/vistacular.xml
The downside is everything else about the experience.
http://www.blogabond.com/xsl/vistacular.xml
The upside is that the entire html page is content. I defy google to not figure out what to index here:
view-source:http://www.blogabond.com/xsl/vistacular.xml
The downside is everything else about the experience.
This is blowing my mind. That's really cool.
That’s less impressive than SGML.
You know, I am so happy that one other person on earth knows this HTML dialect.
I think the use of md-block cannot be considered as "raw HTML". Like CSS-in-JS cannot be considered as pure CSS.
> More importantly, Browsers and HTML are never deprecated.
Browsers are, and HTML is on v5 and has deprecated things.
And using JS definitely can be deprecated too.
"Just raw HTML" is an odd statement when it's obviously not.
And the if some markdown and JS are ok, why not some CSS too?
Browsers are, and HTML is on v5 and has deprecated things.
And using JS definitely can be deprecated too.
"Just raw HTML" is an odd statement when it's obviously not.
And the if some markdown and JS are ok, why not some CSS too?
Using <article> with the HTML 4.0 Transitional doctype? More like, I Blog with Raw Invalid HTML.
"html" is mostly defined in the real world as "something most browsers will render".
<html><head><title>My HTML Page</title></head><body>Hello world!</body></html>
Is technically "invalid", but it's "html" in the sense that everything from w3m and Netscape Navigator through to Chrome bleed will render it as intended.
(About to click the [reply] button hoping the HN software doesn't screw all that markup up.)
<html><head><title>My HTML Page</title></head><body>Hello world!</body></html>
Is technically "invalid", but it's "html" in the sense that everything from w3m and Netscape Navigator through to Chrome bleed will render it as intended.
(About to click the [reply] button hoping the HN software doesn't screw all that markup up.)
As other comments mentioned, the content is written in Markdown and rendered in the browser. So “blog with raw HTML” feels like a stretch... that said, View Source in the browser shows the exact HTML document that's presumably hand-written in the source repo [1], so I guess it comes down to the definition of “raw”. It could mean “not pre-processed”.
[1]: https://github.com/poga/devpoga.org/blob/58a202485cedeae9157...
[1]: https://github.com/poga/devpoga.org/blob/58a202485cedeae9157...
> so I guess it comes down to the definition of “raw”.
And the definition of ”HTML”. Document is markdown.
And the definition of ”HTML”. Document is markdown.
Im confused, blogging with raw html but also using highlight.js and markdown?
Presumably meaning he directly edits the .html files instead of using any kind of SSG/build step. The Markdown is transformed with JS on the client-side.
re: static, there are two main points of view. Static from the visitor's perspective or static from the webmaster's perspective. This seems to be about static from the webmaster's perspective which is a "modern" view and one that seems to have overloaded the term since 2015 or so.
What? No... static web pages can have JavaScript, but everybody gets the same page over the wire. Dynamic web pages have some sort of program generating the resulting page for you, like PHP or Ruby; they can return different HTML for the same URL. That's dynamic. It has nothing to do with if you're the client or the server.
For any communication I think we need to take as a premise that static HTML and static web sites are not the same category of thing. Any particular page on the web can be totally static or totally dynamic or a mix. There are static HTML pages on static web sites. There are dynamic HTML pages on static web sites. There are static HTML pages on dynamic web sites. And there are dynamic HTML pages on dynamic web sites.
The meaning of static HTML is the least contentious. A static HTML page is just an .html (or .htm, or anything else if the mimetype is set right) hypertext markup langage document that is stored on a file system as a file and sent to the end user when they request the URL that maps to that file. The HTML encodes what the web site user will see and does not change.
When the static .html file includes "static" (not really since it is executed code) javascript (or other executing language embeds) that changes the page to something other than displayed by the html in the file on disk. So it becomes a dynamic HTML page (for ~5 years called "DHTML").
The only place where static HTML becomes unclear is in the case where some webserver linked program generates the static HTML on demand with no storage of the HTML as a file on the filesystem before being sent to the site user. In this case even though the user sees only static HTML there's crucially no file ever created on the webserver so it's dynamic HTML.
The meaning of static website is increasingly more unclear compounding on the fuzziness of what a static HTML page is. Generally there are the same two points of view as above but with a tweak.
There's the website users point of view where a static web site is static if the pages are just HTML and do not require executing any code to view. If you (or your browser) look at the source you can read the text and see the image URLs. It does not have to be generated by the browser's execution of some client side code.
Then there's the developer point of view where a static web site if the code required to generate the website is stored in a static file on the webserver. In this framing you can deploy a self contained .html file which includes the javascript code for a client side dynamic web application. This web application can completely change the text shown and even draw in outside information not in the file. But since it can be put on a CDN as a static asset it is a static web site.
You advocate the developer-view of what static website means. But this perception is a modern overloading of the phrase. For literal decades static meant what the user-view of static website. Neither is wrong but unless you state it explicitly there will be misinterpretation like above.
The meaning of static HTML is the least contentious. A static HTML page is just an .html (or .htm, or anything else if the mimetype is set right) hypertext markup langage document that is stored on a file system as a file and sent to the end user when they request the URL that maps to that file. The HTML encodes what the web site user will see and does not change.
When the static .html file includes "static" (not really since it is executed code) javascript (or other executing language embeds) that changes the page to something other than displayed by the html in the file on disk. So it becomes a dynamic HTML page (for ~5 years called "DHTML").
The only place where static HTML becomes unclear is in the case where some webserver linked program generates the static HTML on demand with no storage of the HTML as a file on the filesystem before being sent to the site user. In this case even though the user sees only static HTML there's crucially no file ever created on the webserver so it's dynamic HTML.
The meaning of static website is increasingly more unclear compounding on the fuzziness of what a static HTML page is. Generally there are the same two points of view as above but with a tweak.
There's the website users point of view where a static web site is static if the pages are just HTML and do not require executing any code to view. If you (or your browser) look at the source you can read the text and see the image URLs. It does not have to be generated by the browser's execution of some client side code.
Then there's the developer point of view where a static web site if the code required to generate the website is stored in a static file on the webserver. In this framing you can deploy a self contained .html file which includes the javascript code for a client side dynamic web application. This web application can completely change the text shown and even draw in outside information not in the file. But since it can be put on a CDN as a static asset it is a static web site.
You advocate the developer-view of what static website means. But this perception is a modern overloading of the phrase. For literal decades static meant what the user-view of static website. Neither is wrong but unless you state it explicitly there will be misinterpretation like above.
Is this a parody of something?
"raw html" that does not work without JS (I mean literally, links are not links without JS), but on the other hand looks ugly even if 10 lines of CSS would make it look nice
"raw html" that does not work without JS (I mean literally, links are not links without JS), but on the other hand looks ugly even if 10 lines of CSS would make it look nice
Could you elaborate on "links are not links without JS"?
If you turn Javascript off, the Markdown-formatted text will not display as a clickable link, but like "[hugo](https://gohugo.io/)". You would need to copy and paste the link into a browser address bar to navigate there instead of just clicking the link.
I feel you op, hugo broke sites for me too. You had one job and all that…
But build yourself a static site generator, its a few hours work tops.
Then you have something to blog about.
But build yourself a static site generator, its a few hours work tops.
Then you have something to blog about.
I'd love to hear of static site generator tech that has a good history of stability.
I too take a basic approach, where I use pandoc to generate HTML according to a template, but I'm lacking an RSS feed. That's a bit fiddly to hack up.
https://dthompson.us/projects/haunt.html looks okay.
I too take a basic approach, where I use pandoc to generate HTML according to a template, but I'm lacking an RSS feed. That's a bit fiddly to hack up.
https://dthompson.us/projects/haunt.html looks okay.
As others mention its not raw HTML, but also the browser is applying styles of it's own - you can't get away from that. Isn't that reason we have CSSS resets so we have a baseline starting point that other browsers have forced upon us.
How long ago were the default CSS rules set for a browser. They should probably change.
How long ago were the default CSS rules set for a browser. They should probably change.
I used to blog with raw html. In 1999 when I was 12. It sucked. There is a reason why we use things like markdown now. Still, you kids should definitely dig into the fundamentals at least one time and write raw html. Just don't stay there and pretend it's somehow better for you.
Lots of things suck when you're 12. Speak for yourself, though, HTML really isn't that difficult.
Didn't say it was difficult. Doing the dishes isn't difficult, but it still sucks.
If plaintext blogging fits your vibe and you’ve not yet heard of it, be sure to check out the gemini:// protocol.
An overview of the protocol, proxied from Gemini to HTTP, available here: https://geminiprotocol.net/
An overview of the protocol, proxied from Gemini to HTTP, available here: https://geminiprotocol.net/
See also this review/critique from the cURL author, especially if you’re going to implement it yourself. Particularly around certificate handling and URL parsing, there’s a lot of underacknowleded complexity in Gemini.
https://daniel.haxx.se/blog/2023/05/28/the-gemini-protocol-s...
https://daniel.haxx.se/blog/2023/05/28/the-gemini-protocol-s...
That's a really well written post. Thank you for sharing it, really makes you think about all the thought that has went into http and how important Chesterton's fence is
Yeah but also all of the legacy baggage that it comes with, y’know?
Like the URL parsing stuff for example. The issue is that they pull in one of these enormous old RFC’s and also say “but UTF-8” without any more explanation.
A better URL might be a good thing — scope it down to what’s in common use, design it tightly for your needs, etc. But if you’re gonna do that, do it! Rather than just pulling in an RFC with decades of baggage and then modifying it ad-hoc.
Like the URL parsing stuff for example. The issue is that they pull in one of these enormous old RFC’s and also say “but UTF-8” without any more explanation.
A better URL might be a good thing — scope it down to what’s in common use, design it tightly for your needs, etc. But if you’re gonna do that, do it! Rather than just pulling in an RFC with decades of baggage and then modifying it ad-hoc.
Whoah. Looks at Mr. Fancy here using DIVs on his blog. In my day we used the TD tag like a machine gun.
Why are there so many of these exact kind of posts lately? I swear I’ve seen 10 posts in the last month with some variation on “I use less technology to do X than the next guy”. It might be noteworthy if the author had an interesting problem to tackle, previously used a convoluted stack to accomplish it but then stripped it down to basics - but no, this is just “I wrote HTML to make a website”. I’d rather read “I used a hammer to hit a nail”.
A tiny bit of webdev-side dynamicism can really help with managing visitor-side static websites built on .html files in directories.
If you run your own webserver and write HTML then check out server side includes. Being able to include .html fragments in other .html files means no need to edit the same bit in dozens of .html files (ie, left_menu.html, footer.html, etc). And since SSI hasn't really changed in 20 years the major implementations (nginx, apache, etc) have basically nill attack surface or mantainence burden. And there's no "rebuilding" or anything that's not HTML markup to maintain.
HTML+webserver SSI is just more HTML but without the redundant editing.
If you run your own webserver and write HTML then check out server side includes. Being able to include .html fragments in other .html files means no need to edit the same bit in dozens of .html files (ie, left_menu.html, footer.html, etc). And since SSI hasn't really changed in 20 years the major implementations (nginx, apache, etc) have basically nill attack surface or mantainence burden. And there's no "rebuilding" or anything that's not HTML markup to maintain.
HTML+webserver SSI is just more HTML but without the redundant editing.
Sadly Kibo’s site uses SSI and is now totally trashed as a result.
http://www.kibo.com
http://www.kibo.com
Absolutely agree. Just for fun, I recently implemented SSI using Cloudflare Workers [1] — but with a twist to feel like it's from 2025. It's a bit of a shitcode experiment, but I really wanted to recapture that early hacking spirit.
[1] https://github.com/artps/ssi
[1] https://github.com/artps/ssi
I used to blog with Raw HTML
https://ontology2.com/the-book/html5-the-official-document-l...
though I also published some Jupyter notebooks
https://ontology2.com/essays/PropertiesColorsAndThumbnails.h...
https://ontology2.com/the-book/html5-the-official-document-l...
though I also published some Jupyter notebooks
https://ontology2.com/essays/PropertiesColorsAndThumbnails.h...
> the longest lived one is based on hugo
Upgrading hugo is not straightforward due to the backward incompatibility changes. Too much changes to care for a static generator.
Upgrading hugo is not straightforward due to the backward incompatibility changes. Too much changes to care for a static generator.
Isn’t Hugo distributed as a static binary? I assume that binary doesn’t ask you to upgrade.
That's one thing I did realize over the last year.
It is not a huge work but still some work, especially, as you wait for themes to upgrade themselves with the newer version of Hugo.
You are not obligated to update Hugo if your version works for you.
Irrelevant to the topic, just wanted to say hi. I have the honor to know poga during teenage with shared interest, and you have always been an inspiration to me. Seeing your post on the front page of HN is a welcoming surprise.
Regarding the topic, I resonate with the concern about personal blog having to follow the convention of certain technology. Wouldn't say I enjoy reading it (or any site) without some minimal styling though.
Regarding the topic, I resonate with the concern about personal blog having to follow the convention of certain technology. Wouldn't say I enjoy reading it (or any site) without some minimal styling though.
My favourite project of mine is a little web server to support raw html blogs! It can handle serving via ssl, and adds features like an rss feed, a sitemap and a few go templates to make directory listings easy to maintain. The README is pretty authoritative for documentation.
https://github.com/PlayTechnique/andrew
https://github.com/PlayTechnique/andrew
I thought I was _so_ funny when I wrote this page: https://web.archive.org/web/20011102031149/http://www.mighty...
I’m curious, does [my blog](https://ziofil.github.io/) count as “raw html”? I do have some minor js and css, but I don’t rely on a static site generator and I do everything by hand…
I really like Hugo but I couldn’t ever find the right look and theme that I liked and spent way too much time on it. I decided to just create markdown posts on GitHub on that special user repository where the readme contents end up on your profile.
I browse with Javascript disabled by default. This blog loaded as a plain markdown file.
I'm blogging with Raw HTML since the beginning of this year. The biggest missing piece is probably RSS support which makes me sad.
I can write a script to generate that from the list of article but I'm not sure if there's better way.
I can write a script to generate that from the list of article but I'm not sure if there's better way.
If you're using markdown and js, in what sense are you blogging in raw HTML? Not to doubt but it feels like a qualified version of the underlying state of affairs.
I blog (for work) on WordPress and hate it. I could imagine using org mode or markdown, pandoc to emit HTML with some tuning and a simple script to publish via sftp.
I blog (for work) on WordPress and hate it. I could imagine using org mode or markdown, pandoc to emit HTML with some tuning and a simple script to publish via sftp.
It's you're rawdogging your HTML then it's not that hard to rawdog RSS too.
View source on this page: https://justine.lol/rss.xml
I got the template from a friend.
Very easy.
View source on this page: https://justine.lol/rss.xml
I got the template from a friend.
Very easy.
If I turn off Javascript, your blog breaks in ways that shouldn't be possible if it really was HTML (specifically, links and images disappear[0]). You're not blogging in raw HTML, but markdown. Your homepage is the most 'raw HTML' page I can find on your blog, because it uses real HTML elements to display things, and doesn't even use JS or CSS.
[0] it's particularly bad on https://devpoga.org/cheap-complexity/
[0] it's particularly bad on https://devpoga.org/cheap-complexity/
Perhaps this would work for you? https://feed-me-up-scotty.vincenttunru.com/
It's a GitHub Action that regularly scrapes your page and checks for new entries, turning it into an RSS feed. Set up a redirect yourblog.com/feed -> you.github.io/feeds/feed.xml, then you're golden.
It's a GitHub Action that regularly scrapes your page and checks for new entries, turning it into an RSS feed. Set up a redirect yourblog.com/feed -> you.github.io/feeds/feed.xml, then you're golden.
The moment you add an RSS script you cease to use raw HTML and start to use your own bespoke site generator.
On the plus side, a personal project only changes when you intend for it to, so you don't need to worry about breakage. (Unless your scripting language breaks.)
On the plus side, a personal project only changes when you intend for it to, so you don't need to worry about breakage. (Unless your scripting language breaks.)
RSS is human-readable XML, so you could just manually update your RSS file every time you write a new post, in a text editor.
Bro just write your blog in rss, no styling needed. You need that raw RSS
Quite the unflex. I remember when everyone wrote websites in "Raw HTML".
Shit glitched out on load because you’re using JavaScript lol
Yeah. This isn't "raw html", as I understand it.
To those taking issue with the "raw" HTML claim when the author actually writes markdown syntax and converts it to HTML: SGML, on which HTML is based and which is originally understood to supply the authoring features HTML itself is lacking, has the SHORTREF capability [1] which can map custom tokens into markup and thus implement a large portion of markdown in pure SGML, if still not "raw" HTML.
[1]: https://sgmljs.net/docs/sgmlrefman.html#short-references
[1]: https://sgmljs.net/docs/sgmlrefman.html#short-references
Hey, I blog with raw TXT!
https://misc.l3m.in/txt/raw_txt.txt
https://misc.l3m.in/txt/raw_txt.txt
I was surprised how good txt works on mobile with reader mode!
Existing discussion: https://news.ycombinator.com/item?id=42997896
I see markdown for a second every time I load this page; if you say "raw html" at least convert from markdown on the server!
I think OP is defining Raw HTML as an excuse to not bother with themes, style, or clever use of HTML.
Just ignore the markdown and Javascript....
Just ignore the markdown and Javascript....
"Of course it's raw HTML, if you ignore all the other stuff."
[deleted]
And we shall call this Rawblogging.
I like it, but raw HTML doesn't mean it has to look like it's from the 90s. He could centre the text with CSS, add some whitespace, specify system fonts, rather than just Times Roman etc.
An example of what I mean: http://bettermotherfuckingwebsite.com/
A more flashy example: https://thebestmotherfucking.website/
An example of what I mean: http://bettermotherfuckingwebsite.com/
A more flashy example: https://thebestmotherfucking.website/
I recommend you https://nucelo.com. Open source minimal blog platform. Everything you want is included, rss or newsletter. I pay $4 per month. I used raw html for a while, then I switched to this platform.
[deleted]
Raw HTML is just that. This is all bootstrap.
I get the impression this is a bit of a meme...
"Raw. But cooked"
At the very least the discussion here is popcorn worthy.
"Raw. But cooked"
At the very least the discussion here is popcorn worthy.
Reader mode isn't available. Why?
The page doesn't use the "right" HTML tags: https://stackoverflow.com/questions/47822691/how-do-you-crea...
Probably because there isn't enough 'raw' HTML. Its largely markdown thats converted by JS on your browser.
Lmao no you don't, you use a little HTML to load JavaScript to render Markdown.
Here's how you write a blog with raw HTML:
1. Write some HTML to a file. (No loading third-party JavaScript.)
2. Host that file.
That's it, that's the whole thing.
Here's how you write a blog with raw HTML:
1. Write some HTML to a file. (No loading third-party JavaScript.)
2. Host that file.
That's it, that's the whole thing.
I blog with stone tablets.
Really weird flex, but okay.
[deleted]
I blog in raw machine code
I don't need anything beyond the shell to echo binary values to the end of my current file.
You can not beat me.
I will publish at least one paragraph long blog post before the end of the month... /s
I don't need anything beyond the shell to echo binary values to the end of my current file.
You can not beat me.
I will publish at least one paragraph long blog post before the end of the month... /s
> with md-block for markdown, and highlight.js for syntax highlighting
...served by a simple Kubernetes cluster, I suppose? Back to the roots!
/s
...served by a simple Kubernetes cluster, I suppose? Back to the roots!
/s
[deleted]
Premature optimization
The blog itself is, of course, optimised for viewing in Lynx. In fact it only works in Lynx