Front loaders are the worst. I got stuck with one in a rental . I've managed to make it acceptable by doing 3 things.
First, I switched the hot and cold water inputs. My machine's idea of "warm" was actually more like "very very cold". Now, it gets enough heat. I also cranked up my water heater as high as it would go. These two changes effectively take care of all mildew issues. Don't listen to all of the horrible water temperature advice out there; they advocate for temps that optimize for bacterial growth. Hotter is better.
Second, I looked up videos on youtube to figure out how to make it use a lot more water. This is a relatively simple process that involved unscrewing and removing the case, using a hair dryer for 30 seconds to warm up a loctite covered screw, and turning that scree about a quarter turn. More water is always better.
Third, I ordered a giant sack of Sodium Tripolyphosphate (STPP) from a chemical supplier. Prior to that, I used to buy Trisodium Phosphate (TSP) from Amazon (make sure you get the real stuff). Both require hot water, need about a tablespoon per load, and work extremely well, though STPP is supposed to be better (I haven't noticed a difference). This has two big impacts. Your clothes, especially towels, will feel much softer and nicer. And also, your clothes will stop smelling "good", because STPP is a rinsing agent that helps get all of the soap out of your clothes. The only reason your clothes smell "good" is because modern detergents do a terrible job and the perfumes are added to cover the odor.
If you want to enter a time machine back to a magical era when appliances worked correctly, add a tablespoon of TSP to your dishwasher and run it on the hottest setting.
First, I switched the hot and cold water inputs. My machine's idea of "warm" was actually more like "very very cold". Now, it gets enough heat. I also cranked up my water heater as high as it would go. These two changes effectively take care of all mildew issues. Don't listen to all of the horrible water temperature advice out there; they advocate for temps that optimize for bacterial growth. Hotter is better.
Second, I looked up videos on youtube to figure out how to make it use a lot more water. This is a relatively simple process that involved unscrewing and removing the case, using a hair dryer for 30 seconds to warm up a loctite covered screw, and turning that scree about a quarter turn. More water is always better.
Third, I ordered a giant sack of Sodium Tripolyphosphate (STPP) from a chemical supplier. Prior to that, I used to buy Trisodium Phosphate (TSP) from Amazon (make sure you get the real stuff). Both require hot water, need about a tablespoon per load, and work extremely well, though STPP is supposed to be better (I haven't noticed a difference). This has two big impacts. Your clothes, especially towels, will feel much softer and nicer. And also, your clothes will stop smelling "good", because STPP is a rinsing agent that helps get all of the soap out of your clothes. The only reason your clothes smell "good" is because modern detergents do a terrible job and the perfumes are added to cover the odor.
If you want to enter a time machine back to a magical era when appliances worked correctly, add a tablespoon of TSP to your dishwasher and run it on the hottest setting.