Why wood has gotten so dang expensive(constructionphysics.substack.com)
constructionphysics.substack.com
Why wood has gotten so dang expensive
https://constructionphysics.substack.com/p/lumber-price-faq
151 comments
I added angle brackets around your first URL to make it work. I hope that's ok.
https://news.ycombinator.com/formatdoc
https://news.ycombinator.com/formatdoc
Is lumber already cheap to the consumer? Or you (and the futures markets!) are predicting it soon will be?
If the latter... what do the future markets currently say about expectations of when prices will be back down to what they were or lower?
Ie... when should I plan on building my deck?
If the latter... what do the future markets currently say about expectations of when prices will be back down to what they were or lower?
Ie... when should I plan on building my deck?
I know someone who picks up loads from sawmills and it turns out there was no lumber shortage. They were just holding back on shipments to drive up prices taking advantage of the inflation trend.
[deleted]
ketamine__(3)
The is from May; prices have fallen quite a bit off peaks I hear and some speculators are now trapped under big loads ordered 2 months ago now being delivered.
There's "we bought a sawmill!" ads here in the rural lands now for fresh sawn green pine and oak; which isn't "lumber" yet in any useful sense. I've seen porches being built that won't last the summer.
There's "we bought a sawmill!" ads here in the rural lands now for fresh sawn green pine and oak; which isn't "lumber" yet in any useful sense. I've seen porches being built that won't last the summer.
Yeah, its a shame the article left off what is probably one of the biggest reasons for the price spike. Speculation. 4x price spikes in a relatively stable commodity aren't explained by simple supply/demand economic factors. The article is a couple of months old and we can now see the speculative bubble unwinding.
https://markets.businessinsider.com/commodities/lumber-price
Down 8% two days ago. Down over 50% from the peak. No doubt prices will remain above trend for a while, but 4X is just another case of speculative nonsense over-amplifying the realities.
https://markets.businessinsider.com/commodities/lumber-price
Down 8% two days ago. Down over 50% from the peak. No doubt prices will remain above trend for a while, but 4X is just another case of speculative nonsense over-amplifying the realities.
Is it speculation or is it hedging? We weren't speculating on toilet paper when it was massively out of supply early in the pandemic. Rather, there was a demand shock, and maybe a bit of a supply shock too. If TP's spot price had been meaningfully allowed to float, I have no doubt that it would have traded at 4x its long term average, even if you had factored in only consumer demand.
All that is to say I don't see compelling evidence here that speculation is the cause of the problem. I can as easily see more benign explanations.
All that is to say I don't see compelling evidence here that speculation is the cause of the problem. I can as easily see more benign explanations.
Is there a meaningful difference between speculation and hedging - besides the intent to take delivery? People hedging with the intent to take delivery are simply speculating that the price would go up. Maybe it makes more sense to separate out along those lines instead.
Yes, I think there is. Speculation is trading activity with the intent to profit from a change in price. Hedging -- in the sense I'm talking about -- is buying an asset to guard against a change in price or shortage. You can certainly see them as similar things, and in some sense they are, but I think there would be broad agreement that this sort of hedging does not deserve the same scorn that some have for speculators.
Even if the activity is exactly the same, most people tend to feel differently about an activity because of its motivation. The motivation to obtain large profits is held in much less respect than the motivation to guard against personal shortage. Also, corporate behaviors in general get a lower prior amount of esteem than individual and household level behaviors.
We can definitely talk about whether people ought to view these things differently, but there is little question as to whether they currently do.
Even if the activity is exactly the same, most people tend to feel differently about an activity because of its motivation. The motivation to obtain large profits is held in much less respect than the motivation to guard against personal shortage. Also, corporate behaviors in general get a lower prior amount of esteem than individual and household level behaviors.
We can definitely talk about whether people ought to view these things differently, but there is little question as to whether they currently do.
Speculation is about taking a risk to make a potential gain, while hedging is about reducing risk. Someone buying lumber futures as a hedge really doesn't want lumber prices to go up - it's just an insurance protection in case it does, not a way to make profit.
Whether you take delivery or not isn't exactly the point, since a speculator could take delivery of something then resell it for profit. I think some people did that for TP and masks...
Whether you take delivery or not isn't exactly the point, since a speculator could take delivery of something then resell it for profit. I think some people did that for TP and masks...
If you're buying far more inventory than you could ever conceivably use, you are not hedging, you are speculating.
This may just be a Russel Conjugation.
https://tomdehnel.com/what-is-russell-conjugation/
https://tomdehnel.com/what-is-russell-conjugation/
I hadn't heard that term before, learned something, thanks!
There absolutely were people straight up speculating. I mean videos of people gloating over a garage full of TP exist.
Sorry, to be clear, I never claimed that speculation was nonexistent. I'm just saying that I haven't seen evidence that it was the main driver of the cost changes, outside of bare assertions.
Well that's definitely speculating. Hedging is when you also buy several bushels of bran.
I'm keeping fingers crossed copper will fall back down. I was pricing out some heavy gauge wire last year for a project and passed because I wasn't ready to work on it. Now I'm kicking myself for not pulling the trigger.
A shower elbow at HD is $6.95. Double what it was a year ago. Then again, HD has slowly raised the price on everything since most competitors closed.
https://www.bloomberg.com/news/articles/2021-06-16/china-ord...
I think you may get your wish. It's old info, but there are big players who don't see this as sustainable.
I think you may get your wish. It's old info, but there are big players who don't see this as sustainable.
How does speculation drive the price of lumber up?
Speculators are buying lumber futures. When too many start betting that the price will go up it becomes a self fulfilling prophecy.
Just from a technical perspective, the 1Y chart on that page shows some real promise, for example higher highs and higher lows on multiple time scales.
I'm not terribly interested in lumber but if you want a good price, with that chart it seems like now may be a great time to buy given the current low. It may also be the last time at that price level for a while. (No promises, just what I'd speculate based on the chart)
Edit: To clarify, this comment is mostly registering my surprise. I see no cabal speculation activity, just a big invite for your neighbor to buy some for their active retirement fund at these levels. Think about that as another variable.
I'm not terribly interested in lumber but if you want a good price, with that chart it seems like now may be a great time to buy given the current low. It may also be the last time at that price level for a while. (No promises, just what I'd speculate based on the chart)
Edit: To clarify, this comment is mostly registering my surprise. I see no cabal speculation activity, just a big invite for your neighbor to buy some for their active retirement fund at these levels. Think about that as another variable.
I can’t quite tell if you’re either lampshading/mocking speculator thinking or if this is sincere. But the thinking behind the above comment largely seems to be the source of all the problems.
Is this thinking _really_ the source of all the problems?
I have to admit I expected to see something idiotic when I clicked through to the link! Like, "pshah, pure speculation!" but instead I am looking at a chart that any broker worth their salt, even a conservative one, might green-light for a client right now, today. So I'm sharing what I'm seeing and no, this doesn't perfectly fit a speculation-cabal mindset.
IOW: This is clearly a price level where your non-cabal types will happily buy in and take a reasonable profit later.
For all we know, the really evil ones could have brought it down to this level. So are we going to pin the blame on those millions of people attempting to prepare for a retirement?
And there's nothing wrong with sharing another perspective, is there, really?
Nobody's even proven, or shown how speculation is the source of the problem. It's just expected that we simply believe that? Speculation could be a side effect for all we really know.
I've been trading technicals for years, and a huge lesson you learn is that everybody has a "why", and everybody has a story, but it always comes late. You then turn around and see the same patterns in nature and start to realize: "Why" can be a terribly unhelpful and misleading direction to take your solutions-oriented mindset.
If you want to cut down on speculation, IMO you need to look into things critically, deeply, and everybody's "why" ought to be first. Was it _really_ speculation? Or are speculators just watching natural patterns unfold and joining the ride?
Metaphorically: Even if it feels amazing to pin the blame on the fox who got into the hen house, do you want to go after every fox in the forest, or maybe understand the fox better--draw the foxes around to another location, or design a hen house with doors on it?
I visited the link with an open mind. But I have experience with charts like that and I can tell you, people will buy here, and the price will very likely go up again. I just think that we can do better, creatively if we want to "solve" the greater lumber issue.
I have to admit I expected to see something idiotic when I clicked through to the link! Like, "pshah, pure speculation!" but instead I am looking at a chart that any broker worth their salt, even a conservative one, might green-light for a client right now, today. So I'm sharing what I'm seeing and no, this doesn't perfectly fit a speculation-cabal mindset.
IOW: This is clearly a price level where your non-cabal types will happily buy in and take a reasonable profit later.
For all we know, the really evil ones could have brought it down to this level. So are we going to pin the blame on those millions of people attempting to prepare for a retirement?
And there's nothing wrong with sharing another perspective, is there, really?
Nobody's even proven, or shown how speculation is the source of the problem. It's just expected that we simply believe that? Speculation could be a side effect for all we really know.
I've been trading technicals for years, and a huge lesson you learn is that everybody has a "why", and everybody has a story, but it always comes late. You then turn around and see the same patterns in nature and start to realize: "Why" can be a terribly unhelpful and misleading direction to take your solutions-oriented mindset.
If you want to cut down on speculation, IMO you need to look into things critically, deeply, and everybody's "why" ought to be first. Was it _really_ speculation? Or are speculators just watching natural patterns unfold and joining the ride?
Metaphorically: Even if it feels amazing to pin the blame on the fox who got into the hen house, do you want to go after every fox in the forest, or maybe understand the fox better--draw the foxes around to another location, or design a hen house with doors on it?
I visited the link with an open mind. But I have experience with charts like that and I can tell you, people will buy here, and the price will very likely go up again. I just think that we can do better, creatively if we want to "solve" the greater lumber issue.
It seems you are working from a theory built around price "anchoring". It's a proven bad model.
Nope, not price anchoring. And how do you effectively prove a negative anyway...I see people profiting from models that were long considered voodoo. Always manage risk.
Some people profit at the slot machines sometimes too. For what it’s worth.
Yes, it’s clear speculation is the source of much of this, “all” was hyperbole on my part.
> fairly clearly speculation is the source of much of this
That's a hand wave. You don't want to open your mind and look at different perspectives, fine. But let's not ever think of such a position as a high-quality one.
That's a hand wave. You don't want to open your mind and look at different perspectives, fine. But let's not ever think of such a position as a high-quality one.
Okay that seems reasonable.
plywood at my local home depot is still very much at its highest price ever when I checked last week ($135 for a 1-1/8" 4x8 sheet of t&g subfloor)
> There's "we bought a sawmill!" ads here in the rural lands now for fresh sawn green pine and oak; which isn't "lumber" yet in any useful sense. I've seen porches being built that won't last the summer.
The allegedly "kiln dried lumber" home depot has been selling has been criminally wet throughout the last year too. Not only have people been paying through the nose for the stuff, it's been nowhere near ready to use. I had to let boards I bought for building gambrel rafters sit for a month on my covered deck before attempting to cut them to the pattern. And even after that, a bunch of them shrunk another 1/4" from the pattern in the subsequent month of waiting for me to install. Infuriating to pay so much for stuff that isn't even top quality and ready to go. I also had to throw a few away from splitting and twisting during the drying process...
> There's "we bought a sawmill!" ads here in the rural lands now for fresh sawn green pine and oak; which isn't "lumber" yet in any useful sense. I've seen porches being built that won't last the summer.
The allegedly "kiln dried lumber" home depot has been selling has been criminally wet throughout the last year too. Not only have people been paying through the nose for the stuff, it's been nowhere near ready to use. I had to let boards I bought for building gambrel rafters sit for a month on my covered deck before attempting to cut them to the pattern. And even after that, a bunch of them shrunk another 1/4" from the pattern in the subsequent month of waiting for me to install. Infuriating to pay so much for stuff that isn't even top quality and ready to go. I also had to throw a few away from splitting and twisting during the drying process...
KD-HT is a pretty standardized, commodity product. I used to work at a lumber yard on their Heat Treat process.
I am pretty sure that the lumber I see at Home Depot are the same lumber that I use to work on. It's not like they have their own mills and ovens. They buy the same commodity lumber like everyone else.
TBH, the lumber yard I worked at you to flood. We would have bundled stacks of lumber float all across the yard. We can pretty much take them the next day and ship them to a construction site. KD-HT lumber is pretty good like that.
Now, most of our large customers just have a reasonable expectation of the product. It's wood. It's gonna warp. It's gonna split. It's like most things like fresh fruits, or meat, or leather. There is a lot of variability.
TBH, the lumber yard I worked at you to flood. We would have bundled stacks of lumber float all across the yard. We can pretty much take them the next day and ship them to a construction site. KD-HT lumber is pretty good like that.
Now, most of our large customers just have a reasonable expectation of the product. It's wood. It's gonna warp. It's gonna split. It's like most things like fresh fruits, or meat, or leather. There is a lot of variability.
> criminally wet throughout the last year too
That is not a recent thing. Home Depot wood has been dripping wet for many years. It's routine to put a screw into it and have water running past the head as you tighten it. I typically buy 50-100% more than I expect to use on the assumption that a good chunk of it will warp as it dries and become useless.
That is not a recent thing. Home Depot wood has been dripping wet for many years. It's routine to put a screw into it and have water running past the head as you tighten it. I typically buy 50-100% more than I expect to use on the assumption that a good chunk of it will warp as it dries and become useless.
Most of my big diy home construction projects happened to overlap with the pandemic, and when I described the wet lumber problems to a local with more building experience he was so confident their lumber was properly kiln dried he attacked my ability to measure and cut properly...
I'm not sure if I should feel better or worse about the situation knowing home depot has been doing this long before the pandemic.
I'm not sure if I should feel better or worse about the situation knowing home depot has been doing this long before the pandemic.
I'm pretty sure it's common knowledge that the lumber from the big (blue and orange) box stores is incredibly lacking in quality.
That wood from Stimson is the worst ever. I don't think you can buy worse. I've used all sorts in my life and HD consistently has lumber that cannot even be used to start fires until you dry it.
Plywood is fine, but if you need anything you build to last, buy pressure treated at HD, or buy plain lumber somewhere else.
(I bought some 2x4s for a non-permanent project during the pandemic. It was so soft and wet that when I fired a railgun into one of the pieces, the nail went all the way through. That should not happen)
Plywood is fine, but if you need anything you build to last, buy pressure treated at HD, or buy plain lumber somewhere else.
(I bought some 2x4s for a non-permanent project during the pandemic. It was so soft and wet that when I fired a railgun into one of the pieces, the nail went all the way through. That should not happen)
Whenever I go to Lowes, I always like to go by the lumber section (even when I'm not there for lumber) just to see how warped the dimensional lumber is. It's always a depressing experience.
Just making sure you're not buying the pressure treated wood?
HD sells pressure treated wood that's then kiln dried (KDAT), if you would like to open up a large line of credit with them.
HD sells pressure treated wood that's then kiln dried (KDAT), if you would like to open up a large line of credit with them.
No, just garden variety 2x4x8 kiln-dried studs. Normally a few bucks apiece but going for closer to ten right now.
YMMV, but for people who need actual kiln-dried wood it's usually a better option to go to a real lumber yard.
YMMV, but for people who need actual kiln-dried wood it's usually a better option to go to a real lumber yard.
Oddly the good stuff wasn't much affected. I was making a work bench and picked up a 4x8 of red oak plywood for under $60 in May. Not what I would normally use but half the price.
Yeah, this is strange, especially as red oak plywood is mostly the same thing as normal plywood, the red oak is just a thin veneer on the face. I've been buying cherry lumber recently, and they went from something like $4.50/bf to $6.50/bf here. Significant increase, but not 3-fold.
Now that I think of it, it kinda makes sense: it's not the timber that's gotten more expensive, but the service of milling it. For products from relatively more expensive hardwood timber, milling costs constitute smaller fraction of the final cost, so even if milling costs triple, the final product might only go by 50%.
Now that I think of it, it kinda makes sense: it's not the timber that's gotten more expensive, but the service of milling it. For products from relatively more expensive hardwood timber, milling costs constitute smaller fraction of the final cost, so even if milling costs triple, the final product might only go by 50%.
It's more than just that. You can see weird price changes like this because of the limits of substitution.
Imagine you've got a project to build a bookcase. You're using cheaper normal plywood for hidden structural parts and nicer but more expensive red plywood for the stuff people will see. You price the whole thing out.
Then the price of wood skyrockets. To keep the price of the whole project under control, you start cutting costs. You use more of the cheaper plywood for the whole project and decide to skimp on the red oak.
Scale that across many projects and you get a paradoxical result where the cheapest goods in a category go up in price while the better goods don't, because people are subbing out the "cheap" stuff for the good stuff.
https://en.wikipedia.org/wiki/Giffen_good
Imagine you've got a project to build a bookcase. You're using cheaper normal plywood for hidden structural parts and nicer but more expensive red plywood for the stuff people will see. You price the whole thing out.
Then the price of wood skyrockets. To keep the price of the whole project under control, you start cutting costs. You use more of the cheaper plywood for the whole project and decide to skimp on the red oak.
Scale that across many projects and you get a paradoxical result where the cheapest goods in a category go up in price while the better goods don't, because people are subbing out the "cheap" stuff for the good stuff.
https://en.wikipedia.org/wiki/Giffen_good
FWIW, substitutability is a hard problem with algorithmic pricing, even for relatively stable inventory categories like big box construction retail.
I'd guess (with some insider knowledge) that (1) there wasn't any prebuilt link to adjust substitute pricing & (2) Depot didn't care enough to adjust pricing.
Both Depot and Lowes are in it for volume and long-term, which is why they don't do things like spike generator prices after hurricanes.
I'd guess (with some insider knowledge) that (1) there wasn't any prebuilt link to adjust substitute pricing & (2) Depot didn't care enough to adjust pricing.
Both Depot and Lowes are in it for volume and long-term, which is why they don't do things like spike generator prices after hurricanes.
A friend of mine in CT has problem now in the hardwood supply chain. The issue is that the kiln drying backlog has now caught up with hardwoods as many kilns are full of fir and pine. The supplies of paint grade poplar and soft maple are running quite low now.
I was in Home Depot a couple of days ago (in Western Massachusetts). Crappy 19/32 CDX was $85 for a 4x8 sheet. Sitting right next to it was 3/4" oak veneer at $60. I think it would be pretty funny to sheath a house in sort of cabinet grade plywood (it is 7 ply Purebond which usually has a couple of voids per sheet).
Those are definitely not substitutable. In addition to the difference in glues the peer comment notes (the oak plywood will likely delaminate if exposed to moisture), you need to sheathe a house in a product rated for that use. That oak veneer doesn't have a span rating stamped on it, so any inspector would fail you.
The problem is that the glue in the oak veneer plywood isn't really suitable for exterior applications like that. If it ever gets wet you're hosed.
Modern glues in exterior plywood and OSB-like products are amazing, but they don't use that in oak plywood.
Modern glues in exterior plywood and OSB-like products are amazing, but they don't use that in oak plywood.
Yeah, prices are still ridiculous. Apparently it takes a couple months for the aforementioned price drops in futures to trickle down. If HD bought it for 100, they ain't gonna sell it for 50 regardless of what sawmills are doing(unless of course forced to with overstock and such).
If the market-clearing price that their competitors are selling it for is $50, they’ll sell it for around $50 or they won’t sell it.
You two are saying the same thing. If they won't sell due to an uncompetitively high price, then they'll have overstock. Then they'll be "forced to" sell lower.
I’m saying they’ll do it even if they’re just normally (or even partially) stocked with material. They know their customers are cross-shopping them with other stores, they need to be competitive, and they don’t want to lose the rest of the order lines nor train customers that they’re not competitively priced.
I consider that covered under 'and such' but, it's not so simple.
There's about four layers between the chainsaw and the consumer. So HD, Lowes, etc all exist at layer 4, sometimes 3 and 4. None of them are going to price cut below what they paid. Call it a gentleman's agreement, or common sense.
What you'll most likely see is buying from layer 3 at say, 50, and selling both 100 and 50 dollar wood together at 75.
There's about four layers between the chainsaw and the consumer. So HD, Lowes, etc all exist at layer 4, sometimes 3 and 4. None of them are going to price cut below what they paid. Call it a gentleman's agreement, or common sense.
What you'll most likely see is buying from layer 3 at say, 50, and selling both 100 and 50 dollar wood together at 75.
> The allegedly "kiln dried lumber" home depot has been selling has been criminally wet throughout the last year too.
Eh it’s always been that way. Warped and with plenty of knots too. It was considered poor quality back when a 2x4 cost $2.50.
Eh it’s always been that way. Warped and with plenty of knots too. It was considered poor quality back when a 2x4 cost $2.50.
It was clearly a sawmill issue. Lumber was expensive but timber was cheap.
I don't know how to calculate if more sawmills are needed (permanent backlog) or if it's a temporary backlog. I figure that speculation is for the commodity traders and maybe some stock / sawmill speculators.
In practice, guess and check may scale better? But I've also been to towns where the sawmill shut down and destroyed the local economy, so guess and check may be immoral (even if it's somewhat profitable)
I don't know how to calculate if more sawmills are needed (permanent backlog) or if it's a temporary backlog. I figure that speculation is for the commodity traders and maybe some stock / sawmill speculators.
In practice, guess and check may scale better? But I've also been to towns where the sawmill shut down and destroyed the local economy, so guess and check may be immoral (even if it's somewhat profitable)
This is an easy one to calcucate, you don't even need to do real math. There's a spike in consumer demand due to COVID. People are pouring money into their houses rather than external entertainment and travel. That's a temporary change.
Between the stimulus checks, unemployment checks, and other such policies... as well as the Fed's continued reliance upon an expanded balance sheet (kinda sorta like QE), there's worries that the increased prices are at least partially caused by inflation.
If the inflation-dudes are right, then at least part of the price increase is permanent. That's why the calculations are necessary: because many people are making many different arguments about the future of this current economy.
The one who can predict the future will make money of course.
If the inflation-dudes are right, then at least part of the price increase is permanent. That's why the calculations are necessary: because many people are making many different arguments about the future of this current economy.
The one who can predict the future will make money of course.
Green sawn wood is usually stacked, and the stack's own weight will hold the boards relatively straight as they dry.
Build something, and the whole structure can bend and curl.
Build something, and the whole structure can bend and curl.
It seems like the spectacular boom in home renovation will have to lead to an eventual bust at some point - people generally don't want to do a major renovation that often.
That said, it seems like the huge spike in building materials did a very good thing by making many people postpone renovations until prices come down, which should help smooth out the peak-to-trough chart of building construction.
That said, it seems like the huge spike in building materials did a very good thing by making many people postpone renovations until prices come down, which should help smooth out the peak-to-trough chart of building construction.
> There's "we bought a sawmill!" ads here in the rural lands now for fresh sawn green pine and oak; which isn't "lumber" yet in any useful sense. I've seen porches being built that won't last the summer.
I'm curious why this is. Is it the drying stage, or something else?
I'm curious why this is. Is it the drying stage, or something else?
You can build out of green lumber. But, as wood dries it will twist, warp, and crack. If you happen to live somewhere humid building with green wood is an invitation for fungal rot. For both durability and square building it is better to dry the wood first.
You can frame up houses, but code usually mandates no more than 15-19% moisture before you can close the walls up, for exactly that reason.
I'm sure there's plenty of "almost dry" wood in California.
Yes. The wood will twist and bend as it dries.
- Which, for those curious, is the the whole idea behind greenwood carpentry.
https://en.m.wikipedia.org/wiki/Green_woodworking
Its a shame more of that craft isn't going around. Granted, I'm not sure how a greenwood porch would work.
https://en.m.wikipedia.org/wiki/Green_woodworking
Its a shame more of that craft isn't going around. Granted, I'm not sure how a greenwood porch would work.
Green white oak, especially, can do some cool stuff. I imagine you could do a porch with lap built and grain matched construction and get a "tensegrity" bonus as stuff dried; but ive never seen that trick done with anything more complicated or smaller than house siding.
Wouldn't work well at all for any construction that isn't using mortise and tenon or some other type of friction fit construction. Can be disastrous for traditional construction where pieces are butted up together and nailed.
https://en.wikipedia.org/wiki/Wood_drying
Wood for construction needs to reach an equilibrium moisture point with the outdoor air after its cut.
If its dried outside, it takes months to years to dry, depending on the humidity level and temperature.
The wood is dried because it makes it lighter, and the shrinkage and swelling has already played out during the drying process... instead of when its in place!
Wood for construction needs to reach an equilibrium moisture point with the outdoor air after its cut.
If its dried outside, it takes months to years to dry, depending on the humidity level and temperature.
The wood is dried because it makes it lighter, and the shrinkage and swelling has already played out during the drying process... instead of when its in place!
Yes, wood that is used to build something before it has been dried will warp and curl.
It’s fascinating how consistently the shortage and glut cycle plays out across a diverse range of commodities. The common elements seem to be an undifferentiated product and some delay in the production cycle. The length of shortage and glut depends on the length of delay, which is exacerbated if production depends on fixed assets that take a long time to build and a long time to wear down (e.g. ships).
Yes it has fallen a lot (nearly 50%) from the May peak:
https://www.google.com/amp/s/www.businessinsider.com/lumber-...
https://www.google.com/amp/s/www.businessinsider.com/lumber-...
My FiL works in the industry on large projects, and the word from suppliers is that in Jan, prices should drop 50% from where ever Dec ends up, as there is going to be a ton of supply.
Just today I was listening to a German podcast on this topic ("Warum Bauholz zurzeit knapp und teuer ist") [1]. Main explanation of it having become so expensive in Germany as well is the high demand in the US, China and in Germany itself. Russia has set an export ban on wood, so China is buying more from Germany.
Germany currently has a surplus of wood, yet the prices aren't low. Sawmills are the main benefactors of the current situation, they're processing wood like never before, also because last year a lot of trees were affected by beetles, fungi, storms and the like. So this lower quality wood (which is perfectly fine to use) has been mainly exported. 40% of the processed wood is exported.
Sawmills are buying the trees for cheap due to the surplus that the forest owners (around 96% of the owners own less than 20 ha) are saying that they're now considering to stop selling wood and wait for the fall or next year if they can handle it.
Then again, if they stop selling the wood, the state- or community-owned forest owners (around half of the German forests are privately owned, the other half by the state or communities) might not be able to to pay for the machinery and workers which usually work the entire year around. Also private owners have got together and share machinery and personell which needs to get payed during the entire year. So to some degree they are forced to continue cutting down trees to sell them.
[1] https://www.deutschlandfunk.de/probleme-der-baubranche-warum...
Germany currently has a surplus of wood, yet the prices aren't low. Sawmills are the main benefactors of the current situation, they're processing wood like never before, also because last year a lot of trees were affected by beetles, fungi, storms and the like. So this lower quality wood (which is perfectly fine to use) has been mainly exported. 40% of the processed wood is exported.
Sawmills are buying the trees for cheap due to the surplus that the forest owners (around 96% of the owners own less than 20 ha) are saying that they're now considering to stop selling wood and wait for the fall or next year if they can handle it.
Then again, if they stop selling the wood, the state- or community-owned forest owners (around half of the German forests are privately owned, the other half by the state or communities) might not be able to to pay for the machinery and workers which usually work the entire year around. Also private owners have got together and share machinery and personell which needs to get payed during the entire year. So to some degree they are forced to continue cutting down trees to sell them.
[1] https://www.deutschlandfunk.de/probleme-der-baubranche-warum...
"Because the storm occurred with very little warning, many factories weren’t able to shut down properly, resulting in polymers congealing and solidifying in the equipment"
Wow, I'm surprised there weren't back-up generators if power failure means machine destruction.
Wow, I'm surprised there weren't back-up generators if power failure means machine destruction.
The backup systems relied on natural gas, which was cut off, and/or secondary electrical which was disabled by Texas regulators.
I also wonder if those backups didn’t anticipate having to run the machines as well as keeping ambient temperature up.
I also wonder if those backups didn’t anticipate having to run the machines as well as keeping ambient temperature up.
Lumber price soared globally as well, for the same reasons. COVID was a global thing, after all.
https://m.dw.com/en/demand-for-lumber-soars-in-germany-and-s...
That being said, as the article mentions, most lumber in North America is from Canada, not the US.
https://m.dw.com/en/demand-for-lumber-soars-in-germany-and-s...
That being said, as the article mentions, most lumber in North America is from Canada, not the US.
The shortage isn't that much a result from the pandemic and people doing more DIY-projects, but because the US and China (and also Germany, if we talk about local wood) are building a lot of houses. China buys more wood from Germany now that Russia has set an export ban on wood. The only odd thing which I see is that the export ban is supposed to start in January 2022 [1] so I don't understand why China is already starting to buy more wood from Germany.
[1] https://www.margulesgroome.com/publications/russias-proposed...
[1] https://www.margulesgroome.com/publications/russias-proposed...
Those DIY projects, increase in home improvement, and increase in housing demand has been due to the changes in people's consumption patterns because of changes in people's work patterns due to the pandemic.
Also, lumber is traded globally. US buyers have been importing more lumber from Europe during COVID than before. I guess that means that the demand has been higher in the US.
Yes, I can confirm that lumber prices in Canada went sky-high.
I understand but the article is clearly written with the US in mind. In that sense, adding a few more letters, for context, would've been appreciated.
I am in Scotland and we are struggling for all sorts of materials:
- PIR insulation
- Membranes (DPM, Roof membranes, Vapor check)
- External Cladding (red cedar, siberian larch)
- Concrete
I've had all range of excuses; Covid19, Brexit, Suez Canal and Americans are stealing lumber from Europe.
There are some lumber mills in the Highlands of Scotland that are shipping CLS and other framing timber straight to USA.
- PIR insulation
- Membranes (DPM, Roof membranes, Vapor check)
- External Cladding (red cedar, siberian larch)
- Concrete
I've had all range of excuses; Covid19, Brexit, Suez Canal and Americans are stealing lumber from Europe.
There are some lumber mills in the Highlands of Scotland that are shipping CLS and other framing timber straight to USA.
> Americans are stealing lumber from Europe
I'm picturing Carmen Sandiego putting a freighter full of lumber in her pocket...
I'm picturing Carmen Sandiego putting a freighter full of lumber in her pocket...
It was sad to hear the larger construction companies using their buying power to purchase all available stock and store in their warehouses with no assigned jobs. They were pushing smaller construction companies to the wall when they couldn't access any stock for jobs they actually had on.
If you are a construction company and anticipate a possible/likely disruption in one of your critical raw materials and have the funds to protect your business, what else would you do? It doesn’t sound predatory; rather it sounds eminently sensible.
Tragedy of the Commons is sensible. Businesses exist to maximize their own existence. Must suck to be one of those tiny firms lol
It's like the real-life monopoly game being played in real life. Buy up all the houses, don't upgrade them to hotels until you can buy them back.
Any good source for a graph tracking lumber prices week to week at the retail shelf (as opposed to futures pricing which is easy to find)?
I'm a wood working hobbyist.
I used to pay about $3 for an 8 foot 2x4 at the local big-box / lumber store. I looked this week -- $9 for the same lumber!
I'm going to wait for this to blow over before I build anything, I think.
I used to pay about $3 for an 8 foot 2x4 at the local big-box / lumber store. I looked this week -- $9 for the same lumber!
I'm going to wait for this to blow over before I build anything, I think.
Compounding these issues was the Texas Ice Storm in February, which knocked out roughly 80% of US polymer production. Because the storm occurred with very little warning, many factories weren’t able to shut down properly, resulting in polymers congealing and solidifying in the equipment.
I'm surprised it's not cost effective to have backup generators to power critical equipment long enough for a graceful shutdown if an ungraceful shutdown can keep a plant offline for a month or longer.
I'm surprised it's not cost effective to have backup generators to power critical equipment long enough for a graceful shutdown if an ungraceful shutdown can keep a plant offline for a month or longer.
Great summary and analysis. The context on the cracker shutdowns in February makes it all the more clear. This processing bottleneck has been playing out across the commodities sphere as the 2nd order impacts from COVID play out.
Okay, people stay at home more, so they need more space, so there's demand for construction.
What about the spaces people used to occupy before covid moved them home? Does it drive demand for demolition?
What about the spaces people used to occupy before covid moved them home? Does it drive demand for demolition?
Office rents will probably take a hit in the new normal but I’m guessing everyone now just waits to see what happens.
What’s clear is that many of us with two people who will work from home a lot the coming years have at least one room too few and are building extensions. My builder bought a $25k load of materials and left it on my lawn before summer for an extension they’ll build in August, because their supplier advertised that prices would increase 50% in July.
What’s clear is that many of us with two people who will work from home a lot the coming years have at least one room too few and are building extensions. My builder bought a $25k load of materials and left it on my lawn before summer for an extension they’ll build in August, because their supplier advertised that prices would increase 50% in July.
No-one's really sure what will happen to office space (and even cafes/bars/etc. that relied on office workers for their clientele) after this. Anecdotally my employer has already closed what was previously their main building.
If we're permanently in a more work-from-home world then yes, we'll eventually see demand for remodelling and demolition of downtown offices, though only once the economy and population have picked up enough that there's demand to use the space for something - blighted buildings from the last recession sitting idle for years is a thing that happens. The suburban business parks I can imagine just decaying forever, like low-end out-of-town malls were doing pre-pandemic - there's no other use for them and the land just isn't valuable enough.
If we're permanently in a more work-from-home world then yes, we'll eventually see demand for remodelling and demolition of downtown offices, though only once the economy and population have picked up enough that there's demand to use the space for something - blighted buildings from the last recession sitting idle for years is a thing that happens. The suburban business parks I can imagine just decaying forever, like low-end out-of-town malls were doing pre-pandemic - there's no other use for them and the land just isn't valuable enough.
I guess people hope to return some day. To public libraries, pubs, restaurants, etc.
Weren't rents in SF falling drastically in the second half of 2020?
i wish this was a demand and supply thing but I am really afraid this is going to turn out to be inflation. And it’s actually all the prices that are going up - we’re just talking about wood because we have a good narrative around it.
10 to 20% would be really high inflation but we’re talking about like 200 or 300% wood prices. Nah, even if we happen to have higher inflation than any other year in the last century, lumber prices will still fall a lot.
Lumber prices have tripled for dimensional lumber. It's clearly a short term supply/demand thing and not an inflation thing.
What people consider ‘bad’ inflation is too much money/demand chasing constrained supply that can’t keep up.
If it is a required/needed good, that causes people to raise the amount they are willing to spend to get what they need. Inflationary spirals happen when this ‘infects’ enough markets. Everyone is spending all their money chasing an ever harder to get/more expensive set of essentials, and are willing to spend more and more as time goes on as they get more desperate.
Lumber is probably negotiable/non-essential enough it’s not likely to kick off an inflationary spiral. Food, rent, transportation, though tend to be key.
If it is a required/needed good, that causes people to raise the amount they are willing to spend to get what they need. Inflationary spirals happen when this ‘infects’ enough markets. Everyone is spending all their money chasing an ever harder to get/more expensive set of essentials, and are willing to spend more and more as time goes on as they get more desperate.
Lumber is probably negotiable/non-essential enough it’s not likely to kick off an inflationary spiral. Food, rent, transportation, though tend to be key.
why not both?
IMHO inflation is real and it's going to bite us hard
IMHO inflation is real and it's going to bite us hard
[deleted]
When will empress tree farming start? it's vields are 2-4x the rate of other woods and supposedly is construction usable?
That seems unlikely in the U.S., since it's an invasive species that out-competes native trees.
https://www.invasivespeciesinfo.gov/terrestrial/plants/princ...
https://www.invasivespeciesinfo.gov/terrestrial/plants/princ...
How is that an argument against farms of it? Does Europe not grow maize because it’s a New World crop?
Seems like a valid argument. I wonder what an environmentalist would have to say, considering a bird can carry seeds away from a farm, right?
Maize is a cultigen and can’t reproduce without human intervention so it cannot get to be invasive.
It's weaker than SPF and would require engineering hours to substitute.
https://www.worldtree.eco/empress-lumber/
It doesn't appear to be fundamentally weaker for many applications. If it's yields are 3-4x times what "SPF" is, then maybe use slightly larger boards in support roles?
I'm not associated with worldtree.eco, and obviously they are advertising a product, but I can't really find any more discussion on the pro/cons of empress tree wood production.
The invasiveness problem I heard was specific to a particular species of empress, there are empress species that don't spread so aggressively.
It doesn't appear to be fundamentally weaker for many applications. If it's yields are 3-4x times what "SPF" is, then maybe use slightly larger boards in support roles?
I'm not associated with worldtree.eco, and obviously they are advertising a product, but I can't really find any more discussion on the pro/cons of empress tree wood production.
The invasiveness problem I heard was specific to a particular species of empress, there are empress species that don't spread so aggressively.
You're missing the point: most houses are built without an engineer ($$$) and are only allowed because they follow narrow guidelines about what is allowed. Lumber must be graded SPF. You couldn't substitute oak (stronger) if you wanted to without custom engineering. So for nearly every builder it would cost more to use that lumber than SPF until someone gets it codified into the building code. And, like generic drugs, there's little financial incentive to make that fight with the regulators. So we sit in a local minima forever.
That's interesting information.
"there's little financial incentive to make that fight with the regulators"
Global warming will be the incentive in this case. If Empress tree lumber is that much better for carbon sequestration, and from what I've read it is a fantastic sink and converting sequestered carbon in trees into lumber in construction is a decent long-term strategy in this case.
Really my only interest in pushing empress tree lumber here is the carbon sequestration. I'm not some empress tree farmer or some other scam. The other advantage is that empress trees are pretty hardy from a soil/arable land standpoint, leading to more opportunities to sequester carbon in areas that don't easily forest over like, maybe, Texas badlands.
The other angle is that rapidly replenishing lumber sources prevent old growth forest from being destroyed, which ties into biodiversity and habitat destruction.
"there's little financial incentive to make that fight with the regulators"
Global warming will be the incentive in this case. If Empress tree lumber is that much better for carbon sequestration, and from what I've read it is a fantastic sink and converting sequestered carbon in trees into lumber in construction is a decent long-term strategy in this case.
Really my only interest in pushing empress tree lumber here is the carbon sequestration. I'm not some empress tree farmer or some other scam. The other advantage is that empress trees are pretty hardy from a soil/arable land standpoint, leading to more opportunities to sequester carbon in areas that don't easily forest over like, maybe, Texas badlands.
The other angle is that rapidly replenishing lumber sources prevent old growth forest from being destroyed, which ties into biodiversity and habitat destruction.
This is old news, lumber futures are around 800 dollars now.
"old news"? That's still double the price compared to 2019
They’re now at 775. They are still declining rapidly.
What website do you use to monitor this?
That looks uncannily like the Bitcoin price chart.
The Bitcoin chart looks like the 18th century south sea bubble chart:
https://en.m.wikipedia.org/wiki/File:South-sea-bubble-chart....
https://en.m.wikipedia.org/wiki/South_Sea_Company
Bubbles are not a new phenomenon by any means
https://en.m.wikipedia.org/wiki/File:South-sea-bubble-chart....
https://en.m.wikipedia.org/wiki/South_Sea_Company
Bubbles are not a new phenomenon by any means
Take it from a guy who works in the industry. https://youtu.be/zCvEFXSYFS8
"in the US"...
This habit if speaking as if one is the center of the universe is a bit tiring
This habit if speaking as if one is the center of the universe is a bit tiring
Please don't take HN threads on generic flamewar tangents, and definitely not nationalistic flamewar. That is even more tiring.
https://news.ycombinator.com/newsguidelines.html
https://news.ycombinator.com/newsguidelines.html
selfhoster11(2)
If a large enough percentage of users of a site are from a given country then isn’t it natural that those users will unconsciously make a corresponding assumption in their posts. This is especially so since for most Americans talk about neighboring countries is low.
Last I checked, about 50% of HN readers were in the US, and of course many of those come from other countries originally.
It seems to me that a website in English that has 50% users coming from the U.S. qualifies for the 'if' part of my statement. I think it's understandable for there to be a U.S. centric viewpoint on this site. Not that this is a good thing but it is understandable. It would be good in general for Americans to have a less U.S. centric view. (I grew up in an American colony overseas.)
Sure, I don't think that part of your statement was a problem. You're kind of dipping a toe into nationalistic flamebait though, which is probably why the GP got downvoted.
Why has wood gotten so expensive? It's not like this stuff grows on trees! Oh, wait....
Guys, maybe you can help me. Should I buy a house in California in this market? Or will it all crash when the foreclosure ban ends at the end of July???
This chart of lumber futures gives an idea of the recent past (zoom out 1-5 years for perspective):
<https://www.tradingview.com/chart/?symbol=CME%3ALBS1!>
In a nutshell: a huge advance and now what appears to be a crash (~ -50%) is currently in progress.
The bigger picture is how indicative this compressed boom-bust story is of the future of the surge in US inflation. Lumber is showing us how easy it is for the market to reject ridiculous prices. What's unclear is how low lumber, and other goods/commoditiies that have seen similar booms, can go.
Edit: this links seems to work better
https://www.tradingview.com/symbols/CME-LBS1%21/