Block space is always a little bit of a bidding war, even with zero fees. That's because each additional byte added to a block increases the time it takes to propagate the block by just a little bit.
When miners find a block, they race to get it published as quickly as possible to as many nodes as possible. If A finds a block, and stuffs it full of transactions; and shortly thereafter B finds a block, and includes no transactions, B might actually "win" the race because B can propagate his tiny block much faster than A. So each txn added incurs a tiny penalty just by virtue of adding to the payload.
> they decide which fork to run
In reality most hashpower is pooled and pools autoswitch between forks depending on which is more popular in the moment. So most people running miners are mining all forks.
> the validation that ensures that consensus is maintained between nodes
That's a terrible misunderstanding. If nodes can reach consensus by simply agreeing on transaction validity, then what purpose do you believe miners serve?
The definition of a node is provided in Section 5 of the white paper mentioned in OP. The logic that explains "why you must mine in order to be a peer" is explained in Section 4.
Non-mining nodes are trivial to Sybil, they are "one-IP-one-vote" per Section 4. Only miners are "one-CPU-one-vote." That is why nonminers (what you call "nodes") are not peers to the system, but rather leeches / relays.
> A peer is a node, which is a client that validates all transactions and blocks in the blockchain.
According to the white paper, Section 5, a peer is a miner. That has not changed, regardless of attempts to redefine the paper. To be a peer, you MUST contribute proof of work.
Running a non mining node gives you a copy of the blockchain data that you can trust is valid according to the rules you used to validate it. It does not make you a peer.
You're referring to isolated incidents, which is an invalid comparison.
Instead, if you have information that I have a pattern of murdering lots of women, and my friend has a pattern of murdering lots of men, and you choose to release information about me and not my friend, it immediately suggests that you support killing men but not women.
How can tainted evidence be used to establish guilt beyond reasonable doubt, when the entire basis of trust in the collection of the evidence is ostensibly gone.
> I actually hate the sound of most of the Beatles albums. I think they sound crap by modern standards - tinny, rattly, clogged-up, mid-heavy mixes with no deep bass.
Of course the whole point of bands like the Beatles was that they stood "engineering" on its head, as it was understood at the time (actual scientists wearing actual lab coats attempting to capture sound as accurately as possible).
EMI engineers making classical records were trying to create photographic style recordings. The early Beatles records sound, mostly, like you're standing at the Cavern club in front of a late-1950s sound reinforcement system. Photographic.
The Beatles helped to change the idea of making "photographic" records into making records like painting on canvas. Together with the other influential artists of the time (Beach Boys, Pink Floyd, Mike Oldfield, etc) they transformed modern music.
When yo
>Put them up against a modern trance single mixed ITB and the latter sounds huge, dynamic, cinematic, and infinitely more polished.
>Which is better? It depends...
I think you make my point here.
If I were making a Crystal Method record, of course I would use a different signal chain that if I were making a Dawes record.
These are all amazing benefits, but when you're making art, you'll throw all of those out the window if doing so get you the sound you need.
The problem is thinking that this is either/or. I use a 48 channel ProTools HD system married to gear that's largely 40-70 years old. Best of both worlds.
> all of those phenomena can be perfectly modelled in the box
Nope.
How you gonna model the interaction between a microphone and the preamp load it's driving, and the compressor that's driving, and the EQ it's driving, and the nonlinear summing bus that's feeding, when all of these are interacting in a live signal chain, and all entering various forms of nonlinear behavior based on the age of components, their tolerances which vary from box to box, heat, etc? It might be theoretically possible, but past a certain point, to model these devices requires modeling physics at the materials level. In point of fact most digital "simulations" of these sorts of devices are not simulations at all, but approximations that impart similar EQ, dynamics, and harmonic distortion.
I'm a dev by trade, been doing audio for decades too. I used to believe this was all modellable too. I think there's a tendency for people who are strong in digital signal processing but naive to what these devices are really doing to the signal to be overconfident in our ability to simulate them in realtime.
You can definitely achieve a reasonable facsimile! But if you want the sound of this console then you're going to have to make one or buy one.
> There's a reason they never use actual data and measurements to prove their points
Artists use the most advanced measurement devices in the world: a binaural listening device connected to the world's most advanced neural net. The neural net is the best part.
Sorry. There is much more to sound than frequency response, dynamic range, phase shift, and total harmonic distortion -- and moreover, the "optimum" amount of each of these is not fixed, but depends entirely on the material and the taste of the engineer & producer.
You can get great sound "in the box," don't get me wrong, but ultimately there is, as yet, no substitute for the real thing. A saturation plugin is nowhere close.
To accurately simulate this device, you would have to practically simulate at the molecular level.
> The workflow makes the sound. The lack of automation forces you to make choices. Forces your hand, literally.
You raise an excellent point here. A full-blown DAW is practically without limits: hundreds of tracks, unlimited effects on every track, any signal chain is possible.
But making art is about working within constraints. Most of the best art derives from the constraints as much - or more - as the capabilities of the devices or instruments used.
However there is a technical reason why these devices do sound different, and that is that they all impart euphonic distortion. Bass sounds "bigger." Treble sounds "clearer." Mixed tracks "glue together." Vocals "pop out." A sense of "depth of field" may be imparted. Technically speaking this is all "distortion" of the original signal.
Euphony and accuracy are quite different. Euphony derives from nonlinearity.
These are not cherished for their accuracy. They're built to sound good, For this reason most of the best sounding records still make very heavy use of analog signal path.
I've been recording since the earliest days of DAWs. Yes you can do amazingly good things with a computer, but it is still not possible to build digital devices that "sound as good" IMO. After 15 years of living "in the box" as a mix engineer, waiting for modeling to catch up to hardware, I finally broke down when I realized that the best mix engines still don't compete with the best analog devices. Since that time I've become a convert.
For editing, accuracy, durability, price/performance, and maximum dynamic range through the mix bus, digital is king. If I were recording a symphonic orchestra I would absolutely use an all-digital signal path.
But if I want to make an expressive album like Dark Side of the Moon, I want to stick as much analog in the path as I can fit.
Why try to model chaos, when there's an old box stuffed with tubes and a zillion other nonlinear components?
Nobody - almost - builds devices like these anymore. It comes from the Golden Age, when engineers had different priorities, and the difference is palpable.
Let's assume that's the consumption needed to optimize the functioning of the renal system. But is that necessarily optimal consumption for the whole body?
With no offense to your sister - who I'm sure is correct - hypothetically, maybe this could result in some other condition that a urologist might know nothing about.
It's almost as if quality of life and longevity are not primarily due to having the latest, most expensive technology; but rather by having access to practical, affordable solutions.
When miners find a block, they race to get it published as quickly as possible to as many nodes as possible. If A finds a block, and stuffs it full of transactions; and shortly thereafter B finds a block, and includes no transactions, B might actually "win" the race because B can propagate his tiny block much faster than A. So each txn added incurs a tiny penalty just by virtue of adding to the payload.
> they decide which fork to run
In reality most hashpower is pooled and pools autoswitch between forks depending on which is more popular in the moment. So most people running miners are mining all forks.