Change your MAC address with a shell script (2019)(josh.works)
josh.works
Change your MAC address with a shell script (2019)
https://josh.works/shell-script-basics-change-mac-address
107 comments
or generate an address that is reserved for computers sold to the NSA (:
#
# 00-20-91 (hex) J125, NATIONAL SECURITY AGENCY
# 002091 (base 16) J125, NATIONAL SECURITY AGENCY
#
$> NSA_MAC=$(echo "00:20:91:"`openssl rand -hex 3 \
| sed 's/\(..\)/\1:/g; s/.$//'`)
$> sudo ifconfig eth0 hw ether $NSA_MAC
Bluetooth and wifi mac spoofing is pretty common, both when scanning and connecting. Both iOS and android do it to certain degrees.
It does indeed boost privacy as wireless networks in public places have been trying to track phones this way for a while now.
It does indeed boost privacy as wireless networks in public places have been trying to track phones this way for a while now.
I don't know how it is now, but I remember a lot of generic/no-name Androids using the Mediatek platform would have random MAC addresses (which change every time you re-enable WiFi) because the manufacturer didn't bother writing a fixed one, so the firmware automatically generates a random one to use.
My Pixel 4 uses a different mac every time it connects to a wifi network by default. You can disable it per-network.
My university won't give me an IP, so I can't plug my laptop in. Solution was to fire up an old windows machine and grab the MAC off that.
I did politely ask for an IP before doing that, but they said it was a security risk.
I did politely ask for an IP before doing that, but they said it was a security risk.
Plenty of captive portals use mac-addresses to identify if users have used the captive portal (or have paid the fee of entry if it’s a paid service).
Though I’m not sure I ever bothered to lookup someone’s MAC address.
Though I’m not sure I ever bothered to lookup someone’s MAC address.
Plenty useful back when Panera limited you to 30 minutes of wifi; no idea if they still do.
Their wifi solution tracked you by MAC -- I think it was Sonicwalls? -- so when you hit the 30-min limit you'd spoof the MAC, re-connect, then back to business as usual.
I'd usually comply when the place was bumping -- hard to work when it's loud and crazy -- but most of the time it was empty in the mornings and the 30-min-limit was pointless.
Their wifi solution tracked you by MAC -- I think it was Sonicwalls? -- so when you hit the 30-min limit you'd spoof the MAC, re-connect, then back to business as usual.
I'd usually comply when the place was bumping -- hard to work when it's loud and crazy -- but most of the time it was empty in the mornings and the 30-min-limit was pointless.
This is not about privacy but access restriction (wifi in public hotspot limited to e.g. 30mins). And there it is still a very inexpensive solution i guess.
That's even _necessary_, as there are a few flag bits in the MAC address - broadcast, user-administrated-address, etc.
Just using a random value might give you "interesting" effects and lot of fun debugging those.
Just using a random value might give you "interesting" effects and lot of fun debugging those.
lots of fun ones. I'd do something like Boeing. There's an airplane on your wifi
I chose Silicon Graphics (08:00:69) and it's fascinating to see that anyone else did, for any reason. For reference, my ISP hands out 2-8 IPv4 addresses, expiry indefinite (unless I power down), to clients connected to the cable modem. So my stack looks like
[Motorola Surfboard]->[4p 1GbE Switch]->[Linksys E3000 (08:00:69::)]
Depending on the mood of the ISP, I can have several other networks running from the 4-port switch. If I spoof those MACs repeatedly, I can get an arbitrary (within range) block of public IPs, and there's some seriously weird behavior in allocating those IPs (change my MAC 48 times in a row, end up on the same IP I had just lost from a power outage?)
[Motorola Surfboard]->[4p 1GbE Switch]->[Linksys E3000 (08:00:69::)]
Depending on the mood of the ISP, I can have several other networks running from the 4-port switch. If I spoof those MACs repeatedly, I can get an arbitrary (within range) block of public IPs, and there's some seriously weird behavior in allocating those IPs (change my MAC 48 times in a row, end up on the same IP I had just lost from a power outage?)
I always use Sage (the accounting software folks) one of 00-80-2c as it's burned into my memory 30 years later after working on Sage Mainlan back in the days...
Looking at the list I'd go for SpaceX (00-26-12)
I still don't get it. What makes this company particularly funny?
Cray computers were very famous in the 1970s and 1980s as highly specialist, highly parallel super computers with a fantastic marketing gimmick: not only were they the same size as 5 large refrigerators, they also came with their own built-in couch.
https://en.m.wikipedia.org/wiki/Cray-1
The idea of someone wheeling one of these into a cafe (because they are stealing the free wifi) causes me non zero amusement.
The NSA example from someone else is better.
Interestingly the only time I’ve ever had the pleasure of reclining on a Cray banquette was at the NSA’s cryptology museum at Ft Mead.
https://en.m.wikipedia.org/wiki/Cray-1
The idea of someone wheeling one of these into a cafe (because they are stealing the free wifi) causes me non zero amusement.
The NSA example from someone else is better.
Interestingly the only time I’ve ever had the pleasure of reclining on a Cray banquette was at the NSA’s cryptology museum at Ft Mead.
Shameless plug but I run a service that lets people look up the manufacturer by its MAC address: https://macvendors.com
My high school provided MacBook Pros to students that would only connect to the network if the MAC address was whitelisted. Since I wanted to use my own newer Mac, I spoofed the address of my school provided one.
Since it was an open network, it was simple scraping the network for other connected devices and spoofing one at random, and I was surprised when the same technique worked in say, hotels with open networks.
Since it was an open network, it was simple scraping the network for other connected devices and spoofing one at random, and I was surprised when the same technique worked in say, hotels with open networks.
My university required registration of MAC addresses for whitelisting & bandwidth metering. My enterprising roommate and I worked out that we could bypass all bandwidth limitations by spoofing the MAC addresses of machines in the computer labs as long as the machine was turned off. We eventually got caught for using something like 90% of the university's total bandwidth - the security admin was thrown for quite a loop when he tracked down the machines that were supposedly using all of the bandwidth and found that they were turned off at the time. Apparently it took some creative techniques to figure out where the traffic was actually coming from.
Our punishment was something like two weeks with all internet access revoked (except for the use of lab machines for classwork), plus a written apology, plus a signed agreement not to violate the acceptable use policies again or else face the real punishment for what we did.
The school administrator in charge of the punishment asked the security admin what we were downloading (this was when the MPAA/RIAA were cracking down hard on people uploading files on sharing networks), but the security admin had mercy on us and told her he didn't think it was relevant, thank god!
Our punishment was something like two weeks with all internet access revoked (except for the use of lab machines for classwork), plus a written apology, plus a signed agreement not to violate the acceptable use policies again or else face the real punishment for what we did.
The school administrator in charge of the punishment asked the security admin what we were downloading (this was when the MPAA/RIAA were cracking down hard on people uploading files on sharing networks), but the security admin had mercy on us and told her he didn't think it was relevant, thank god!
> Apparently it took some creative techniques to figure out where the traffic was actually coming from.
probably they did lookup the MAC address on the switches and saw it on a port that did not match expectations. if you were using a wired connection this would trivially lead to you... on wireless you would have to narrow it down further by monitoring signal strength of the station :)
probably they did lookup the MAC address on the switches and saw it on a port that did not match expectations. if you were using a wired connection this would trivially lead to you... on wireless you would have to narrow it down further by monitoring signal strength of the station :)
See how Aaron Schwartz got caught, if someone really wants to get you, even wireless is easy to trackdown if you physicaly visit the location.
My university dorms didn't allow XBox 360s or other gaming systems on the network, so I did the same thing by spoofing my laptop's address. I wasn't much of a "HACKERMAN" growing up, but this was one accomplishment that really drew me in and caused me to start studying OSI.
wow, whitelisting & bandwidth metering - I never saw a university SO strict.
This was ~15 years ago. The bandwidth metering was in place to throttle people doing big downloads via the internet. We had something like 1gb per week at 100mbps, then gradually got brought down to something like dialup. Internet2 was not metered.
There were people running internal torrent trackers and file indexing/sharing sites on the LAN that could saturate the network infrastructure between the various dorms and buildings on campus. I guess the whitelisting also helped figure out who was doing what when problems happened.
There were people running internal torrent trackers and file indexing/sharing sites on the LAN that could saturate the network infrastructure between the various dorms and buildings on campus. I guess the whitelisting also helped figure out who was doing what when problems happened.
In my uni there was a limit of one mac address per network socket in dorms (also metering). Also no wifi.
>Since it was an open network, it was simple scraping the network for other connected devices and spoofing one at random
you should probably know that using the same mac address in parallel will cause connectivity issues for both...
you should probably know that using the same mac address in parallel will cause connectivity issues for both...
Yes but if they were connected to the same router.
Most of these systems are distributed and having multiple APs connected to some central Radius server.
Because modern systems optimize for roaming between nodes, you can join network, use dns-sd to gather mac addresses of the computers which are not physically connected to your AP (in conjuction with 'tcpdump -I')
Then voila, 2 devices using same MAC without any problems.
PS. I personally use "printer" addresses for 2 reasons: 1: generally everyone forgets to nicely setup firewall for them since they're infrastructure objects. 2: they have relatively less traffic and probably located some obsecure room with an AP for them.
Most of these systems are distributed and having multiple APs connected to some central Radius server.
Because modern systems optimize for roaming between nodes, you can join network, use dns-sd to gather mac addresses of the computers which are not physically connected to your AP (in conjuction with 'tcpdump -I')
Then voila, 2 devices using same MAC without any problems.
PS. I personally use "printer" addresses for 2 reasons: 1: generally everyone forgets to nicely setup firewall for them since they're infrastructure objects. 2: they have relatively less traffic and probably located some obsecure room with an AP for them.
i was less concerned about authentication issues and more about routing issues as ARP would lead to results depending on time and location inside the network topology...
Correct. In a sibling comment I posted the actual script I used that scrapes and dedupes, and a "spoof only" mode to lessen the chance of a collision.
Since I have no use for it anymore, here is the script[0]. I wrote most of it during a free period :D
[0] https://gist.github.com/siraben/c3133b39e470d1aed16fd71f42b8...
[0] https://gist.github.com/siraben/c3133b39e470d1aed16fd71f42b8...
this[0] is likely slow because it will try to do reverse DNS lookups for each host which can be disabled, at least on linux, with "-n"
[0] https://gist.github.com/siraben/c3133b39e470d1aed16fd71f42b8...
[0] https://gist.github.com/siraben/c3133b39e470d1aed16fd71f42b8...
I'm not positive if any of them charge at this point, but years ago this would also work at airports.
DO NOT generate a random MAC Address in the manner suggested here. You have a change of setting the "Locally administered address" bit, or worse the unicast/multicast bit. This will cause some network switches to silently drop your packets and you won't know why.
I learned this at 2 in the morning trying to bring up a second FPGA. Couldn't work out why it didn't work when the first one did, and it turned out to be because someone (possibly me) had picked the MAC Address 01:02:03:04:05:06 (we were on a private network).
Instead, pick an OUI you like (the first 3 bytes), and then randomly generate the last 3.
I learned this at 2 in the morning trying to bring up a second FPGA. Couldn't work out why it didn't work when the first one did, and it turned out to be because someone (possibly me) had picked the MAC Address 01:02:03:04:05:06 (we were on a private network).
Instead, pick an OUI you like (the first 3 bytes), and then randomly generate the last 3.
Actually this is effectively a broadcast/multicast MAC address.
The first byte of your MAC address should always be an even number. The value of the second bit is supposed to indicate if the MAC is "burned-in" and basically doesn't matter. The LSB of the first byte, however, should always be zero.
The first byte of your MAC address should always be an even number. The value of the second bit is supposed to indicate if the MAC is "burned-in" and basically doesn't matter. The LSB of the first byte, however, should always be zero.
You say "actually" but you seem to be agreeing with me.
The first byte of my bad MAC is '01'. This not even because the LSB is set, making it a multicast address which is bad.
The first byte of my bad MAC is '01'. This not even because the LSB is set, making it a multicast address which is bad.
A very useful thing that I automated recently is changing my router’s MAC address and subsequently rebooting the modem. For my ISP (xfinity) this has the amazing benefit of getting me a new IP. For a home connection, your IP is the easiest way to track you. Yes VPNs exist and are better (depends on provider, latency, blahblah), but if you don’t mind your ISP seeing your traffic and instead just want to avoid an IP representing your identity, it’s a very easy way to accomplish this.
I learned this back in the day when running into daily transfer limits on free file sharing websites. Big hassle when trying to download multi-part zip archives on a weekend.
Nowadays people upload to Google Drive, plus other hosts have more relaxed limits, so I haven't had the need to do it as often. But it's still useful to know.
Nowadays people upload to Google Drive, plus other hosts have more relaxed limits, so I haven't had the need to do it as often. But it's still useful to know.
I always wondered what happend to the rapidshare/megaupload space that existed if that’s what you mean by “free file sharing websites”. Curious where people moved to/what are the major indexes now?
I tried this but I didn't work. When I googled it, I found out that Apple has disabled this in BigSur.
Here is the link to it: https://developer.apple.com/forums/thread/106768
Author here - Sorry about that! I'm still running an older (2017-era) MBP, but honestly I think many other solutions kicked around in the comments here are better than what I'd come up with.
(I'd really wanted to write a bash script, this seemed like a good option.)
For example: https://news.ycombinator.com/item?id=26062315
Or, another solution that looks promising: https://news.ycombinator.com/item?id=26062553
That solution looks clean and simple, though I've not tried it. It might work for you!
(I'd really wanted to write a bash script, this seemed like a good option.)
For example: https://news.ycombinator.com/item?id=26062315
Or, another solution that looks promising: https://news.ycombinator.com/item?id=26062553
That solution looks clean and simple, though I've not tried it. It might work for you!
It’s not an issue with Big Sur, rather it’s a hardware issue with Macs starting around 2018. I had the same problem on a 2020 MacBook Aid running Catalina.
It looks like iproute2mac[0] will let you change your MAC address. It can even set a random one.
Could you try if it works on your Apple device?
[0]: https://github.com/brona/iproute2mac
Could you try if it works on your Apple device?
[0]: https://github.com/brona/iproute2mac
Tried it it didn't work either.
Why so much trouble?
ifconfig(8)[0]
"The link-level ("link") address is specified as a series of colon-separated hex digits. This can be used to, for example, set a new MAC address on an Ethernet interface, though the mecha- nism used is not Ethernet specific. Use the ("random") keyword to set a randomly generated MAC address. A randomly-generated MAC address might be the same as one already in use in the net- work. Such duplications are extremely unlikely. If the inter- face is already up when this option is used, it will be briefly brought down and then brought back up again in order to ensure that the receive filter in the underlying Ethernet hardware is properly reprogrammed."
[0] https://www.freebsd.org/cgi/man.cgi?query=ifconfig&manpath=F...
ifconfig(8)[0]
"The link-level ("link") address is specified as a series of colon-separated hex digits. This can be used to, for example, set a new MAC address on an Ethernet interface, though the mecha- nism used is not Ethernet specific. Use the ("random") keyword to set a randomly generated MAC address. A randomly-generated MAC address might be the same as one already in use in the net- work. Such duplications are extremely unlikely. If the inter- face is already up when this option is used, it will be briefly brought down and then brought back up again in order to ensure that the receive filter in the underlying Ethernet hardware is properly reprogrammed."
[0] https://www.freebsd.org/cgi/man.cgi?query=ifconfig&manpath=F...
I just found out that you can hold option key while clicking on the wireless icon in OSX to get more details.
* mind blown *
This works on other system menu bar icons, as well as on menus in some apps. For example, holding option down with the File menu open in most Apple apps gets you the "save as" item.
Now you'll spend your next hour option-clicking random stuff. Sorry.
Now you'll spend your next hour option-clicking random stuff. Sorry.
Option is the most irritating feature of mac UX, everywhere it keeps popping new hidden features, it is true even for top menu and simple navigations.
Most irritating for me is if all windows of an app are hidden (minimized), simple Cmd+Tab doesn't brings anything to focus, but some gymnastics with Option and voila now you can see your Slack.
Most irritating for me is if all windows of an app are hidden (minimized), simple Cmd+Tab doesn't brings anything to focus, but some gymnastics with Option and voila now you can see your Slack.
Author here! Yeah, that menu option was super useful to find, too. I've not really used this shell script for a while (I spend a lot less time in coffee shops now because Covid) but I still use the option-click thing regularly.
I hope it continues to be useful to you!
I hope it continues to be useful to you!
Same here. Option Click does special stuff on a lot of things, I didn't know about this one.
[deleted]
This has been sitting in my ~/scripts/ folder for the past 3.5 years. Just changing randomly the last pair was enough to do the trick in most situations.
Also it requires understanding the first time which one is your WiFi interrface.
13 Jun 2017 changeMACAddress.sh*
#!/bin/bash
sudo ifconfig en0 ether xx:xx:xx:xx:xx:$(od -txC -An -N1 /dev/random|sed 's/ //g'); sudo ifconfig en0 down; sleep 1; sudo ifconfig en0 upThe Arch Wiki also has a pretty good overview of how to change your MAC address with a bunch of different tools, including randomizing it on reboot.
https://wiki.archlinux.org/index.php/MAC_address_spoofing
https://wiki.archlinux.org/index.php/MAC_address_spoofing
At least on macOS, the script can be made more efficient with less code; no need for interaction or manually reconnecting: https://github.com/vitorgalvao/tiny-scripts/blob/master/macs...
I’ve been using it for years without a hitch. Installable with `brew install vitorgalvao/tiny-scripts/macspoof`.
I’ve been using it for years without a hitch. Installable with `brew install vitorgalvao/tiny-scripts/macspoof`.
I've got a shorter one! (which may or may not work anymore. its old and hastily written :)
https://github.com/chrislgarry/XFinityHotspotSpoofer/blob/ma...
https://github.com/chrislgarry/XFinityHotspotSpoofer/blob/ma...
When I used something like this on macOS, it confused software like OmniFocus that used the MAC address for licensing and synchronization. I'm not sure if that's still the case, but worth keeping an eye on.
I use this software.
https://github.com/feross/spoof
https://github.com/feross/spoof
It requires node. I’d rather have no dependencies.
One-liner Randomize OpenWRT mac address
uci set network.wan.mac_addr=$(hexdump -n3 -e'1/3 "8c:8d:8e" 3/1 ":%02X" "\n"' /dev/random) && uci commit networkUsing macchanger might be a better option:
http://www.gnu.org/software/macchanger
http://www.gnu.org/software/macchanger
I remember using something like this to circumvent the free 15 minutes of free 'sky-fi' in an aeroplane. Worked like a treat!
If you're using wpa_supplicant (most linux distros and probably android), you can automatically randomise the MAC address, even before association, using
set mac_addr 1
set preassoc_mac_addr 1
set gas_rand_mac_addr 1
Maybe use a /8 subnet with reasonable DHCP lease durations to avoid that possibility. I know not all home gear can do it (old WRT54G with stock firmware can’t; thinking more along the lines of pfSense or Ubiquiti routers).
Hey, author here! Imagine my surprise to check HN this morning and see one of my posts up! (Thanks, u/mooreds!)
Besides being riddled with typos, as I've scanned through these comments I'm finding many _far better ways_ of accomplishing what I set out to accomplish.
I might update my script (and consequently the post)! sometime soon. Unfortunately with Covid, I've spent far less time in coffee shops than I once did.
Besides being riddled with typos, as I've scanned through these comments I'm finding many _far better ways_ of accomplishing what I set out to accomplish.
I might update my script (and consequently the post)! sometime soon. Unfortunately with Covid, I've spent far less time in coffee shops than I once did.
I’ve always wanted to try this on airplane wifi to (1) avoid the ridiculous charges and (2) see what happens when I share a MAC address with someone who already paid and is on the network ... I’m guessing nothing good.
Of course I need to first use wire shark or something to get a MAC address that’s already connected to the network. This is where I’m hazy.
Of course I need to first use wire shark or something to get a MAC address that’s already connected to the network. This is where I’m hazy.
Since most paid wifi networks let you log in without a network password and then gate internet access by redirecting HTTP/DNS requests to a captive portal, it should be possible to launch an ARP spoofing attack [0] to impersonate the default gateway, causing all clients to route their traffic to your device, whereupon you can examine it with WireShark or tcpdump to get at their MAC addresses. I've tried something similar while bored on a flight, but sadly the Surface Pro 7's Windows network drivers don't seem to let you change your MAC address.
[0] https://en.wikipedia.org/wiki/ARP_spoofing
[0] https://en.wikipedia.org/wiki/ARP_spoofing
If it's an open (unencrypted) network you don't even need to ARP spoof. Their MAC address will already be in cleartext in the packets - just start your interface in monitor mode on the proper channel and capture some traffic.
Can confirm that it works for refreshing free trials.
Maybe just good ol tcpdump?
Another one liner you can use for macOS:
sudo ifconfig en0 ether $(openssl rand -hex 6 | sed 's/\(..\)/\1:/g; s/.$//')
Instead of setting some random address in public networks, use someone else's address.
Many public networks in Turkey require registering with TCKN (national id number) due to some "laws".
I don't want some random guy to log my activity and tie it to me direcly.
In macOS tcpdump command has ability to "monitor mode" wifi card.
Then I use someone who's idle but has legimitate connection.
Please note that those networks are not encrypted/secured at all. So anyone within range (or with large antenna) can essentially capture or inject something...
Many public networks in Turkey require registering with TCKN (national id number) due to some "laws".
I don't want some random guy to log my activity and tie it to me direcly.
In macOS tcpdump command has ability to "monitor mode" wifi card.
sudo tcpdump -Ie
Then I use someone who's idle but has legimitate connection.
Please note that those networks are not encrypted/secured at all. So anyone within range (or with large antenna) can essentially capture or inject something...
[deleted]
ifconfig has been deprecated in a bunch of distros in favour of iproute2 [1]. Here is an example of how to set MAC address using the ip command [2]
1. https://ubuntu.com/blog/if-youre-still-using-ifconfig-youre-... 2. https://wiki.archlinux.org/index.php/MAC_address_spoofing#ip... 2.
1. https://ubuntu.com/blog/if-youre-still-using-ifconfig-youre-... 2. https://wiki.archlinux.org/index.php/MAC_address_spoofing#ip... 2.
ifconfig en0 | grep ether # one of these will return a MAC address that matches
ifconfig en1 | grep ether # the value you saw when looking for your current
ifconfig en2 | grep ether # mac address.
ifconfig en3 | grep ether # Keep incrementing the `en0` value until you run out of
# devices
I would like to see, something that would change/ask for a new IPv6 address for each application on your computer, or for each browser tab a different IPv6 address.
Hi, I took the liberty of putting your code and the remarks here in a pretty wrapper: https://github.com/pforret/remac
In short: "remac -p ibm set" will set your MAC address to a new MAC adress with an "IBM Corp" prefix
In short: "remac -p ibm set" will set your MAC address to a new MAC adress with an "IBM Corp" prefix
Looks like you can uses these commands if you've got iproute2mac[0] installed.
ip link set dev en0 address 00:12:34:45:78:90
ip link set en0 address random
ip link set en0 address factory
What's the advantage over the command shown in the article?
sudo ifconfig en0 ether xx:xx:xx:xx:xx:xx
Made the same thing a while back in about 15 LOC.
Lived two years next to one of those XFinity Wifi hotspots that kick you off after an hour :)
https://github.com/chrislgarry/XFinityHotspotSpoofer/blob/ma...
https://github.com/chrislgarry/XFinityHotspotSpoofer/blob/ma...
I have to always do this to pass those hotel wifi login portals.
What I will do is spoof my mac address to match my laptop, and then pass the login wall to create a session. Then restore the original mac address, and then I can finally use my apple tv on the hotel wifi...
I wish they had a web browser on the apple tv.
What I will do is spoof my mac address to match my laptop, and then pass the login wall to create a session. Then restore the original mac address, and then I can finally use my apple tv on the hotel wifi...
I wish they had a web browser on the apple tv.
Don't just randomly pick numbers for a mac address. Make sure the bit 1 of the leftmost octet is set to 1, which indicates a "locally administered" mac address, and that bit 0 of that same octet is set to zero, which indicates a non-multicast address.
Or just use this utility. Been around for years and you can randomize the MAC to make it look like it came from other manufacturers
https://technitium.com/tmac/
https://technitium.com/tmac/
brew install spoof-mac
pip install SpoofMACMe: Skimming through the post, sees his command line. Is that Bob the Fish?!
Switched to Powerline on the command prompt a while ago and can't go back.
Switched to Powerline on the command prompt a while ago and can't go back.
Isn't it illegal to change mac address?
At most you'll annoy your internet service provider. MAC addresses don't leave the immediate network they're used on, so you can do whatever you want within your home network.
Why? You may well need to do this in case of Address Clashes.
Its not unknown for a manufacturer to mess up and reuse MAC addresses.
Its not unknown for a manufacturer to mess up and reuse MAC addresses.
No. Half the number space is free for local management.
TL;DR:
On a Mac to change your MAC address of the Wi-Fi card, type: ifconfig en0 ether ab:cd:ef:ab:cd:ef
Replace en0 by another interface if needed
On a Mac to change your MAC address of the Wi-Fi card, type: ifconfig en0 ether ab:cd:ef:ab:cd:ef
Replace en0 by another interface if needed
Does it actually work? As of ~5 years ago Mac OS X would report that it had changed the MAC address without actually having done so.
I gave it a try and couldn't get it to change. It will show as the new address in the terminal window but when I hit option + wifi it shows me the prior address.
I am actually suprised this was possible even in Mavericks. Using it since then...
Yes UI shows original address and existing connection will use existing address (ie not changed) But if you re-connect (turn off then on WiFi) it will use new one.
Weirdly "disconnect" was always using whatever set in the ifconfig. Meaning that I could "deauthenticate" other people by spoofing their address.
Yes UI shows original address and existing connection will use existing address (ie not changed) But if you re-connect (turn off then on WiFi) it will use new one.
Weirdly "disconnect" was always using whatever set in the ifconfig. Meaning that I could "deauthenticate" other people by spoofing their address.
This should be the top reply, not the useless discussion without any extra content.
“Mac” in title needs to be all caps. MAC = media access control. It’s not referring to a company’s product.
Hacker news automatically changes the capitalization of submission titles like that, unfortunately
If you edit it, the second time stays as you typed it.
I emailed the admins, and they fixed it.
[deleted]
”We’ve got a problem; someone’s misusing the crap out of the free wifi”
”Lets narrow it down by hardware: what kind of device are they using?”
”How should I know!?”
”Check the first three bytes of their MAC address; it’ll tell you the mfr”
”OK... checking now... yeah I see them... looking up their MAC... bingo... hey, what is ‘Cray Inc’?”
—
Better versions of this joke are available here:
http://standards-oui.ieee.org/oui/oui.txt