"Anyone else out there vibe circuit-building?"(twitter.com)
twitter.com
"Anyone else out there vibe circuit-building?"
https://twitter.com/beneater/status/2012988790709928305
105 comments
> The core issue isn't that LLMs are bad at circuits, it's that we're asking them to do novel design when they should be doing selection and integration.
I don't want to detract from what you're building, but I'm puzzled by this sentence. It very much sounds like the problem is that they're bad at circuits and that you're working around this problem by making them choose from a catalog.
Try that for code. "The problem isn't that LLMs are bad at coding, it's that we're asking them to write new programs when they should be doing selection and integration".
I don't want to detract from what you're building, but I'm puzzled by this sentence. It very much sounds like the problem is that they're bad at circuits and that you're working around this problem by making them choose from a catalog.
Try that for code. "The problem isn't that LLMs are bad at coding, it's that we're asking them to write new programs when they should be doing selection and integration".
I only had undergrad EE training so maybe I’m out of touch with what’s done in industry. But, I think most human engineers mostly don’t design novel circuits either. Chips come with specification sheets that have some reference implementations. So obviously somebody at the company designs that reference implementation, but I think most users stick pretty close to it…
Copy/paste (from reference boards or examples in the datasheet) is pretty common when starting a new design but if you don't then figure out what each connection and external component are there for and adjust to your application (or sometimes figure out the part won't work for you) then you quite literally don't know what you are doing.
That’s exactly how it has been working for me in code. I have a bunch of different components and patterns that the LLMs mix and match. Has been working wonderfully over the past few months.
At what level of abstraction does programming become a process of selection and integration?
Why get philosophical and not just deal with the reality that 95% of the industry are dealing with languages that just compile down to C? We are already at some of the highest levels of abstraction thus far in the history of the trade.
Are there examples of LLMs generating novel code? If so, who is it novel to?
Not trying to be a smart ass here, I’ve been keeping an eye out for years.
Not trying to be a smart ass here, I’ve been keeping an eye out for years.
Maybe you can provide some examples of what you would consider to be “novel” code?
The proof of the Erdos problem the other day was called novel by Terrence Tao. That seems novel to me.
The proof of the Erdos problem the other day was called novel by Terrence Tao. That seems novel to me.
Everything is derivative of something else. “Novel” is a distinction for works which are minimally derived, but everything created is a remix of something else. Novelty is an illusion.
Are most circuits novel? I'd assume that there is enough out there to fit 80% of PCB design needs and sure it can still be bad at the remaining 20%.
That's precisely how LLMs work for code, yes. Were you not aware?
Sorry, could have been more clear, LLM's are great at architecting high level design decisions, but terrible at the nitty gritty - without better tooling (with the right tooling, such as https://flux.ai, they are capable!).
I even had Gemini hallucinate a QFN version of the TPS2596 last night, it was so confident that the *RGER variant existed. In an automated pipeline, this would break things, but giving it a list of parts to use, it becomes a lot more useful!
I even had Gemini hallucinate a QFN version of the TPS2596 last night, it was so confident that the *RGER variant existed. In an automated pipeline, this would break things, but giving it a list of parts to use, it becomes a lot more useful!
That is exactly what LLMs are good at for code
I think Altium tried to do something similar. A bunch of common blocks being able to just plop on the PCB, (auto) route few tracks and done. Failed because there was always something some client wanted to do, move, change or optimize for production run.
Module based design is cool for getting the prototype going but once you get into production you want to optimize everything so it falls apart quickly when you need to move the parts (not blocks, parts) to fit the least possible amount of space, cut components that could be shared (do 8 blocks on one board each with its own decoupling caps need entire set of them? Probably not). Fine for prototyping/hobby stuff/one off but falls apart quickly in production.
Still, having working prototype quickly that can then be optimized in more traditional way can still be very valuable.
> It's the same insight that made software dependencies work. You don't ask ChatGPT to write you a JSON parser from scratch, you ask it which library to use. Hardware should work the same way.
hardware optimising gets you far more money faster than software, because the cost of software not being optimal is mostly cost on the consumer (burning more CPU than it would if it was optimized), while for hardware each chip less is more money left in your pocket and there are actual size constraints that can be pretty hard edged vs software's "well the user will have to download extra MB more"
Module based design is cool for getting the prototype going but once you get into production you want to optimize everything so it falls apart quickly when you need to move the parts (not blocks, parts) to fit the least possible amount of space, cut components that could be shared (do 8 blocks on one board each with its own decoupling caps need entire set of them? Probably not). Fine for prototyping/hobby stuff/one off but falls apart quickly in production.
Still, having working prototype quickly that can then be optimized in more traditional way can still be very valuable.
> It's the same insight that made software dependencies work. You don't ask ChatGPT to write you a JSON parser from scratch, you ask it which library to use. Hardware should work the same way.
hardware optimising gets you far more money faster than software, because the cost of software not being optimal is mostly cost on the consumer (burning more CPU than it would if it was optimized), while for hardware each chip less is more money left in your pocket and there are actual size constraints that can be pretty hard edged vs software's "well the user will have to download extra MB more"
I think it's also that hardware costs are so easy to quantify compared to engineering labor and software dependency maintenance etc
This sounds interesting for quick prototypes, but tbh it doesn't map onto how most iterative layout processes actually work. At least in my experience. $0.02
However, I wanted to say that for a lot of common parts I find the Adafruit open source schematics to be at least as useful as the application layout suggestions in many datasheets. When it comes to regulators etc it's nice to see how they did it, because like your project, you really can approach it like a block.
However, I wanted to say that for a lot of common parts I find the Adafruit open source schematics to be at least as useful as the application layout suggestions in many datasheets. When it comes to regulators etc it's nice to see how they did it, because like your project, you really can approach it like a block.
If I understand what you are doing this sounds like a great idea.
For example a part like the ADS7953 ADC comes with layout recommendations, including the design of the ground plane underneath the chip and the placement of the decoupling caps. A more extreme example would be an esp32 and all of it's supporting parts, including the keepout area on the PCB for wifi transmission.
I really want to assemble circuits out of higher level primitives like that, drag and drop a chip and all of its supporting parts, including their layout and power connections.
For example a part like the ADS7953 ADC comes with layout recommendations, including the design of the ground plane underneath the chip and the placement of the decoupling caps. A more extreme example would be an esp32 and all of it's supporting parts, including the keepout area on the PCB for wifi transmission.
I really want to assemble circuits out of higher level primitives like that, drag and drop a chip and all of its supporting parts, including their layout and power connections.
So this isn't exactly putting pre-wired up blocks together, my intent behind phaestus is to essentially to get you from an idea to a prototype tangible product as fast as possible.
I'm targeting sub 5mins from first prompt to manufacturing exports, stl files for enclosure, gerbers for pcb manuf, bin file for firmware, bom for pcba.
E.g. if you wanted something that doesn't exist, but don't have the time, the skills or it's just not worth it. One silly example I had was a colour e-ink selfie fridge magnet. As far as I know, that doesn't exist, I could make it, but I can't be arsed. (so I could suprise my partner with a selfie, a picture of our dog, or anything, just a little treat for her for putting up with me).
With this, it'll pull in a ESP32-S3 Sense Xiao board, an e-ink module, a battery connector and a usb c charge connector. glue it all together, and there we go.
Should work if you wanted a rudimentary zigbee mesh communicator, pulls in a C6, a touchscreen, battery, probably a physical button or two. Once that block library starts filling up, it'll become more and more capable.
However, what I suspect you're after is more aligned with https://www.circuitsnips.com
I built circuitsnips to be the 'thingiverse' for electronics schematics.
Unfortunately it's been a bit neglected since so much of my free time has gone into phaestus, I did have great intentions to kicad up some official reference designs, so I can get rid of the github scraped bootstrap data as that was the sticky point both ethically and for the quality of the schematics, but there are only so many hours in a day.
I'm targeting sub 5mins from first prompt to manufacturing exports, stl files for enclosure, gerbers for pcb manuf, bin file for firmware, bom for pcba.
E.g. if you wanted something that doesn't exist, but don't have the time, the skills or it's just not worth it. One silly example I had was a colour e-ink selfie fridge magnet. As far as I know, that doesn't exist, I could make it, but I can't be arsed. (so I could suprise my partner with a selfie, a picture of our dog, or anything, just a little treat for her for putting up with me).
With this, it'll pull in a ESP32-S3 Sense Xiao board, an e-ink module, a battery connector and a usb c charge connector. glue it all together, and there we go.
Should work if you wanted a rudimentary zigbee mesh communicator, pulls in a C6, a touchscreen, battery, probably a physical button or two. Once that block library starts filling up, it'll become more and more capable.
However, what I suspect you're after is more aligned with https://www.circuitsnips.com
I built circuitsnips to be the 'thingiverse' for electronics schematics.
Unfortunately it's been a bit neglected since so much of my free time has gone into phaestus, I did have great intentions to kicad up some official reference designs, so I can get rid of the github scraped bootstrap data as that was the sticky point both ethically and for the quality of the schematics, but there are only so many hours in a day.
Thanks for the link, that is very impressive.
This is conceptually interesting to me because I see this as almost a more generic TI Webench. I’m curious why your focus in the sized “grid” blocks (presumably for placement directly on the PCB layout) instead of doing the same but for the schematic. That way I still have the flexibility of laying out the board how I want to meet eg mechanical constraints instead of working around a 12.7mm grid.
I saw routing as equally as big of a headache as the schematic, so formalizing the layout to a grid means layout becomes a compilation problem, not a design problem.
My intent for phaestus isn't to design pcb's, it's to design entire products, and also to be friendly to non technical users who don't know what a PCB is, let alone do layout themselves.
My intent for phaestus isn't to design pcb's, it's to design entire products, and also to be friendly to non technical users who don't know what a PCB is, let alone do layout themselves.
This sounds very interesting, especially if you combine it for instance with an FPGA for logic blocks.
Thanks, as a concept it has potential, I've leveraged some of my previous projects www.circuitsnips.com for inspiration for the subcircuit blocks, TOKN for more accurate parsing of schematics, and to a lesser extent even my datasheet MCP server and kicad-netlist tool, more info at https://www.mikeayles.com/
For the time being, I'm erring away from feature creep, even though I really, really want to though! For the sorts of products I would like this to make for the time being, simple I2C, SPI and GPIO driven peripherals are the limit. I only have 2 more weeks, and then I want to have a working, battery powered device on my desk. PCB, Enclosure, Firmware, everything.
Similarly, I haven't got a framework for anything mechatronic in the MCAD pipeline, so no moving parts (besides clickable buttons). Fixed devices are fine, like screens and connectors though.
For the time being, I'm erring away from feature creep, even though I really, really want to though! For the sorts of products I would like this to make for the time being, simple I2C, SPI and GPIO driven peripherals are the limit. I only have 2 more weeks, and then I want to have a working, battery powered device on my desk. PCB, Enclosure, Firmware, everything.
Similarly, I haven't got a framework for anything mechatronic in the MCAD pipeline, so no moving parts (besides clickable buttons). Fixed devices are fine, like screens and connectors though.
Is there a way to stay up to date with what you are doing?
It very much aligns with how I've approached hardware since I was 15 and had a massive stack of functional blocks of electronics circuitry that I would combine in all kinds of ways. I've lost the 3x5's, but I still work that way, build a simple block, test it, build another block, test that, hook the one to the other etc.
It very much aligns with how I've approached hardware since I was 15 and had a massive stack of functional blocks of electronics circuitry that I would combine in all kinds of ways. I've lost the 3x5's, but I still work that way, build a simple block, test it, build another block, test that, hook the one to the other etc.
Feel free to star/watch the repo for the project at: https://github.com/MichaelAyles/heph
I may be able to set up an RSS feed for the blog if that interests you? edit: https://phaestus.app/feed.xml
There's a limited sign up currently on the site, which currently goes to an approval page. I don't think I'm quite ready for it to be fully open yet, as i'm paying all the inference, but I should be starting to populate the gallery soon with generated projects.
I may be able to set up an RSS feed for the blog if that interests you? edit: https://phaestus.app/feed.xml
There's a limited sign up currently on the site, which currently goes to an approval page. I don't think I'm quite ready for it to be fully open yet, as i'm paying all the inference, but I should be starting to populate the gallery soon with generated projects.
RSS feed would be helpful.
Done, https://phaestus.app/feed.xml. If there's any issues i'd appreciate the feedback, I haven't used an RSS feed in a while!
Seems to work, thanks!
NP, I don't do GitHub (because MS), but I'll bookmark your pages and check back periodically. Please do post to HN whenever you reach an interesting milestone and feel free to reach out.
I’m curious why you don’t target an HDL, which seems like it should match very well to llm capabilities, and rely on existing layout solvers for describing the last physical layout step?
This seems to be a discussion about board level circuits. HDLs are for chip design.
So far the language models aren’t great at HDL but I assume it’s just a training priority thing and not some characteristic of HDLs.
So far the language models aren’t great at HDL but I assume it’s just a training priority thing and not some characteristic of HDLs.
Why, yes I am.
I know Ben is having some fun, perhaps making a valid point, with the burning component on the breadboard. I think it does underscore a difference between software vibing and hardware vibing—crash vs. fire.
But in fact vibe-breadboarding has drawn me deeper into the electronics hobby. I have learned more about op-amps and analog computing in the past two months in large part thanks to Gemini and ChatGPT pointing the way.
I know now about BAT54S Schottky diodes and how they can protect ADC inputs. I have found better ADC chips than the ones that come pre-soldered on most EDP32 dev boards (and have breadboarded them up with success). These were often problems I didn't know I should solve. (Problems that, for example, YouTube tutorials will disregard because they're demonstrating a constrained environment and are trying to keep it simple for beginners, I suppose.)
To be sure I research what the LLMs propose, but now have the language and a better picture in my mind to know what to search for (how do I protect ADC inputs from over or under voltages?). (Hilariously too, I often end up on the EE Stack Exchange where there is often anything but a concise answer.)
5V USB power, through-hole op-amp chips… I'm not too worried about burning my house down.
I know Ben is having some fun, perhaps making a valid point, with the burning component on the breadboard. I think it does underscore a difference between software vibing and hardware vibing—crash vs. fire.
But in fact vibe-breadboarding has drawn me deeper into the electronics hobby. I have learned more about op-amps and analog computing in the past two months in large part thanks to Gemini and ChatGPT pointing the way.
I know now about BAT54S Schottky diodes and how they can protect ADC inputs. I have found better ADC chips than the ones that come pre-soldered on most EDP32 dev boards (and have breadboarded them up with success). These were often problems I didn't know I should solve. (Problems that, for example, YouTube tutorials will disregard because they're demonstrating a constrained environment and are trying to keep it simple for beginners, I suppose.)
To be sure I research what the LLMs propose, but now have the language and a better picture in my mind to know what to search for (how do I protect ADC inputs from over or under voltages?). (Hilariously too, I often end up on the EE Stack Exchange where there is often anything but a concise answer.)
5V USB power, through-hole op-amp chips… I'm not too worried about burning my house down.
Both Gemini and ChatGPT have a pretty comically wrong knowledge of op-amps. They usually recommend outdated chips and are confused about circuit topologies. I was looking at this last week and it hasn't changed. I asked them to suggest and evaluate microphone circuits and they were just bad. I would really, really recommend reading some human-written text if you're learning about that.
I can't think of any reason why you'd want to use Schottky diodes to protect op-amp inputs. They have high leakage currents and poor surge capabilities. Most op-amps have internal protection diodes, and if you need some extra ESD or overvoltage protection, a Schottky diode probably isn't the way.
I'm not taking an anti-LLM view here. I think they are useful in some fields and are getting better. But in this particular instance, there's a breadth of excellent learning resources and the one you've chosen isn't good.
I can't think of any reason why you'd want to use Schottky diodes to protect op-amp inputs. They have high leakage currents and poor surge capabilities. Most op-amps have internal protection diodes, and if you need some extra ESD or overvoltage protection, a Schottky diode probably isn't the way.
I'm not taking an anti-LLM view here. I think they are useful in some fields and are getting better. But in this particular instance, there's a breadth of excellent learning resources and the one you've chosen isn't good.
> I can't think of any reason why you'd want to use Schottky diodes to protect op-amp inputs
My first guess would be the fast switching time of the Schottky makes them appear useful for responding to transient events.
My first guess would be the fast switching time of the Schottky makes them appear useful for responding to transient events.
They also have a low forward voltage and an actual current rating, so it can be easier to trust that they will clamp a voltage within range indefinitely.
Probably because most of the training data includes it. A huge amount of hobbyist electronics writing on the internet has advice that hasn't been updated since the '70s.
Thanks, I have read a lot of human-written text (and actual books from the day) in addition to the LLM feedback. Again though, had I ignored LLMs altogether I would have barely progressed in the past two months. I think. They seem to act as an "idea board" of sorts—sends me out then looking for others to validate (or not) what they're spouting.
"Schottky diodes to protect op-amp inputs…" Not op-amp inputs, ADC inputs (which may well come from an op-amp output though—I am playing with analog computing after all).
"Schottky diodes to protect op-amp inputs…" Not op-amp inputs, ADC inputs (which may well come from an op-amp output though—I am playing with analog computing after all).
Those ADC probably also have protection diodes, take a look at the datasheet because you may be better with other options, and very likely can use diodes with a larger band gap if you really need bulky protection.
> I have found better ADC chips than the ones that come pre-soldered on most EDP32 dev boards (and have breadboarded them up with success).
Depending on your setup: beware of your ground and realize that breadboards are an extremely bad fit for this sort of application. It's hard enough to get maximum performance out of a good DAC on a custom designed PCB, on a breadboard it can be a nightmare.
Depending on your setup: beware of your ground and realize that breadboards are an extremely bad fit for this sort of application. It's hard enough to get maximum performance out of a good DAC on a custom designed PCB, on a breadboard it can be a nightmare.
The breadboard has validated the communication between the ESP32 and ADC chip (over I2C).
It's enough that I've now moved to KiCad layout and will wait for the boards to come back to see if the actual ADC data I am getting is more or less linear, noiseless…
It's enough that I've now moved to KiCad layout and will wait for the boards to come back to see if the actual ADC data I am getting is more or less linear, noiseless…
Ah ok! Thanks for that bit of clarification, it makes a world of a difference, yes, you can use the breadboard for that, but - based on my own experience - if you want to actually use an ADC on a breadboard you're going to be in for a world of hurt as soon as you exceed some very low threshold frequency of updating and you're going to be fighting all kinds of weird bias effects. The parasitic capacitance of those breadboards is just terrible.
Large metal planes uniformly spaced. At what point is the parasitic capacitance just a capacitor.
And an antenna, and a coil. Breadboards are great for slow and digital up a few 100 Khz, above that you are going to have the occasional interesting challenge / hairpulling session.
I just wanted to vote with my feet and say that my experience echoes yours closely.
Modern coding agents have a remarkable grasp of circuit design and the net result is that they keep pushing me to learn more, faster.
I do find that I often have to specify that I only want parts that are "active on Digikey" because otherwise it will recommend obsolete parts. However, I consider this just like reviewing code generated by an LLM. You don't get a pass on reading datasheets or verifying statements.
I recently had GPT 5.2 spit out a progression of circuits that can amplify a dynamic mic signal to line level, simple to complex, with the intention of finally learning how good amplifiers work. Adding transformers and gain stages with the different OPA family parts and hearing the hum disappear and noise floor drop is the best kind of education.
A tip: BAT54SW specifically is the best part for protecting your pins.
Modern coding agents have a remarkable grasp of circuit design and the net result is that they keep pushing me to learn more, faster.
I do find that I often have to specify that I only want parts that are "active on Digikey" because otherwise it will recommend obsolete parts. However, I consider this just like reviewing code generated by an LLM. You don't get a pass on reading datasheets or verifying statements.
I recently had GPT 5.2 spit out a progression of circuits that can amplify a dynamic mic signal to line level, simple to complex, with the intention of finally learning how good amplifiers work. Adding transformers and gain stages with the different OPA family parts and hearing the hum disappear and noise floor drop is the best kind of education.
A tip: BAT54SW specifically is the best part for protecting your pins.
[deleted]
> vibe-breadboarding has drawn me deeper into the electronics hobby.
Exactly. I'm a life-long software guy, but I've dabbled in electronics at various times. But typically I'd hit walls that I just didn't know how to get past, and it wasn't easy to find solutions. If I'd had an LLM to help, I'm pretty sure I'd have become much more deeply involved in electronics.
Exactly. I'm a life-long software guy, but I've dabbled in electronics at various times. But typically I'd hit walls that I just didn't know how to get past, and it wasn't easy to find solutions. If I'd had an LLM to help, I'm pretty sure I'd have become much more deeply involved in electronics.
Know the risks, prepare for them, get a little burned now and then, have fun... sounds like a recipe for learning to me.
Sometimes sarcasm is so subtle…
Irrespective, "letting the magic smoke out" has been a part of the electronic hobbyist's vernacular long before vibe-breadboarding. (Been there many times.)
Irrespective, "letting the magic smoke out" has been a part of the electronic hobbyist's vernacular long before vibe-breadboarding. (Been there many times.)
Just this morning I was vibing with Gemini to make a battery-powered stove monitor to sell that I might call "Yes I turned off the stupid stove" :-)
Gemini was suggesting the circuit design and of course I'd do the final work myself, but I find vibe-circuit-building to be quite valuable.
Gemini was suggesting the circuit design and of course I'd do the final work myself, but I find vibe-circuit-building to be quite valuable.
Easiest way to get this foolproof would be to put an induction loop around the power cable and use the reading from that as a proxy for on/off state.
It would catch any case where the stove is drawing power, irrespective of possible failure modes of the stove itself.
It would catch any case where the stove is drawing power, irrespective of possible failure modes of the stove itself.
That's the idea
monitor home's phases and just learn AI how to spot patterns to identify each device. I think there was a product doing that already..
Yes there is
Is your market people with anxiety/OCD about whether they turned off stove?
Your idea would be a hard sell to anyone paranoid enough, since they won't trust your monitor.
An alternative would be to install a safety key switch or a magnetic safety key. The paranoid can then check they have the key on them when they leave the home (like the lady worried about her hair dryer - see below).
Or perhaps a camera facing the oven switch?
Scott Alexander wrote https://slatestarcodex.com/2014/11/21/the-categories-were-ma...
Your idea would be a hard sell to anyone paranoid enough, since they won't trust your monitor.
An alternative would be to install a safety key switch or a magnetic safety key. The paranoid can then check they have the key on them when they leave the home (like the lady worried about her hair dryer - see below).
Or perhaps a camera facing the oven switch?
Scott Alexander wrote https://slatestarcodex.com/2014/11/21/the-categories-were-ma...
The Hair Dryer Incident was probably the biggest dispute I’ve seen in the mental hospital where I work.
Basically, this one obsessive compulsive woman would drive to work every morning and worry she had left the hair dryer on and it was going to burn down her house. So she’d drive back home to check that the hair dryer was off, then drive back to work, then worry that maybe she hadn’t really checked well enough, then drive back, and so on ten or twenty times a day.
It’s a pretty typical case of obsessive-compulsive disorder, but it was really interfering with her life. She worked some high-powered job – I think a lawyer – and she was constantly late to everything because of this driving back and forth, to the point where her career was in a downspin and she thought she would have to quit and go on disability. She wasn’t able to go out with friends, she wasn’t even able to go to restaurants because she would keep fretting she left the hair dryer on at home and have to rush back. She’d seen countless psychiatrists, psychologists, and counselors, she’d done all sorts of therapy, she’d taken every medication in the book, and none of them had helped.
So she came to my hospital and was seen by a colleague of mine, who told her “Hey, have you thought about just bringing the hair dryer with you?”
And it worked.
She would be driving to work in the morning, and she’d start worrying she’d left the hair dryer on and it was going to burn down her house, and so she’d look at the seat next to her, and there would be the hair dryer, right there. And she only had the one hair dryer, which was now accounted for. So she would let out a sigh of relief and keep driving to work.
And approximately half the psychiatrists at my hospital thought this was absolutely scandalous, and This Is Not How One Treats Obsessive Compulsive Disorder, and what if it got out to the broader psychiatric community that instead of giving all of these high-tech medications and sophisticated therapies we were just telling people to put their hair dryers on the front seat of their car?
But I think the guy deserved a medal. Here’s someone who was totally untreatable by the normal methods, with a debilitating condition, and a drop-dead simple intervention that nobody else had thought of gave her her life back.That's not the target customer I had in mind, but that might be good. Was thinking of those who have elderly forgetful parents, or my wife. Or my son--we were nearly late to church because as we were pulling out of the driveway, "I think I left the stove on." Sigh.
I know there is a market for it, there are several competing products, but none use an inductive loop for easier install.
I know there is a market for it, there are several competing products, but none use an inductive loop for easier install.
I've been vibe circuit building since the 1970s, but that's not what this is about, is it? ;-)
Years ago, at Pumping Station One in Chicago, I watched someone struggle with the driving of multiple LEDs from an Arduino in his project. He wondered why the LEDs got dimmer when more than one was lit.
I looked at the original schematic, and what he had built, and noticed a difference. The original design had a resistor on each LED, but he had decided that was a redundancy and refactored it to use a single LED instead. In the case of current flow, this meant the circuit still worked, but that current limiting that resistor provided now was shared across every active LED, leading to the progressive dimming as more LEDs were active.
It turned out his background was in software, where the assumptions are much different as to what is important. Cutting out redundant code is an important skill.
I saw it as a cognitive impedance mismatch being played out in real life.
I assume the same is true for an LLM/AI attempting the same leap.
Years ago, at Pumping Station One in Chicago, I watched someone struggle with the driving of multiple LEDs from an Arduino in his project. He wondered why the LEDs got dimmer when more than one was lit.
I looked at the original schematic, and what he had built, and noticed a difference. The original design had a resistor on each LED, but he had decided that was a redundancy and refactored it to use a single LED instead. In the case of current flow, this meant the circuit still worked, but that current limiting that resistor provided now was shared across every active LED, leading to the progressive dimming as more LEDs were active.
It turned out his background was in software, where the assumptions are much different as to what is important. Cutting out redundant code is an important skill.
I saw it as a cognitive impedance mismatch being played out in real life.
I assume the same is true for an LLM/AI attempting the same leap.
I actually had this exact scenario come up last week except that in my version it warned me to make sure that I added a resistor to each LED to keep brightness normalized.
I didn't happen to need this particular advice, but it stuck in my head as something that would potentially save someone learning a lot of pain.
I didn't happen to need this particular advice, but it stuck in my head as something that would potentially save someone learning a lot of pain.
Had this same experience back when I first learned to program a PIC microcontroller. You really shouldn't be driving LEDs directly off IO pins anyways. I think the digitalness of IO pins also lends itself to not thinking about the underlying circuitry and coming at it from a software lens.
It depends. Many modern microcontrollers are perfectly fine driving LEDs directly off IO pins if the pin specs say it is rated for sufficient current (like 20mA). However, older ones like ESP8266 can only do like 2mA and the 8051 even less. Or you run into a total power budget issue if your are running too many pins. Also, some IO pins are perfectly fine at sinking current to ground but aren't suited for sourcing current, in which case the LED would be directly connected to an external high voltage and the IO pin would simply be switching to ground or not.
If you know what you're doing with electronics design, I've found that leveraging an LLM to help come up with ideas, layout block diagrams, and find parts can be super useful. Integrating Digi-Key or Mouser API support for finding parts pricing and inventory is also super handy. Using the distributor APIs can also allow you to perform natural language search which isn't possible (or isn't easy) through the distributor websites as the LLM can quickly download the datasheet and read it as part of its searching operation to verify if a part should be considered given your requirements.
I think the problem with LLMs is they fail to adhere to implicit or explicit constraints. Parts finding functionality of DigiKey is pretty darn good, but it would be awesome to find if there are cheaper equivalent circuits that are functionally equivalent to a particular block, yet again under aforementioned constraints. Multi-component simplification would be awesome so as long as it's safe. AI, so far, is not yet a substitute for review by an expert human.
If you have solid domain knowledge, LLMs are a force multiplier for electronic design. You just have to have a spider sense for “this is going off the rails”.
Other than that, it does useful circuit review, part selection (or suggestions for alternative parts you didn’t know existed), and is usually usefully skeptical. It’s also great at quick back of the napkin “can I just use a smt ceramic here?” Type calculations, especially handy for roughing out timings and that kind of thing.
Other than that, it does useful circuit review, part selection (or suggestions for alternative parts you didn’t know existed), and is usually usefully skeptical. It’s also great at quick back of the napkin “can I just use a smt ceramic here?” Type calculations, especially handy for roughing out timings and that kind of thing.
This. LLM's are still not good enough to trust for Vibe-Circuit building - a circuit re-design is a lot more cost and time than a code change - But they can get you over so many hurdles getting you to the right references in forums and datasheets quickly, I suspect it wont be too long before they can make schematics and PCB's that are 90% there, but currently much more useful in the firmware design.
I am now more of a hobbyist than a professional and LLM's allow me to get results quicker, for example over Christmas I replaced my Pioneer stereo with a new custom motherboard, re-using the class AB analog parts and all the switches and the VFD Display. LLM helped me do it a lot quicker and gave me a couple of novel options, write up here => https://rodyne.com/?p=3380
I am now more of a hobbyist than a professional and LLM's allow me to get results quicker, for example over Christmas I replaced my Pioneer stereo with a new custom motherboard, re-using the class AB analog parts and all the switches and the VFD Display. LLM helped me do it a lot quicker and gave me a couple of novel options, write up here => https://rodyne.com/?p=3380
im imagining if you had a couple parts picked, an llm could follow the reference designs quite well and pick relevant parts and lay them out.
maybe not in the best way, but from a post here last week or so, somebody has written an altium mcp, from which i assume a bunch of the timing and capacitor checks could be run.
maybe not anything particularly high tech, but enough to let mechanical engineers put together test boards without needing to get too far into the electrical discipline
maybe not in the best way, but from a post here last week or so, somebody has written an altium mcp, from which i assume a bunch of the timing and capacitor checks could be run.
maybe not anything particularly high tech, but enough to let mechanical engineers put together test boards without needing to get too far into the electrical discipline
What would stop us from using something like LTspice to validate the circuit before risking physical components?
This seems ~identical to the situation where we can use a compiler or parser to return syntax errors to the agent in a feedback loop.
I don't know exactly what the tool calling surface would look like, but I feel like this could work.
This seems ~identical to the situation where we can use a compiler or parser to return syntax errors to the agent in a feedback loop.
I don't know exactly what the tool calling surface would look like, but I feel like this could work.
I'm working on this. It works pretty well. The main issue I'm working out right now (which has proven very difficult) is the auto-placing and auto-routing on a multi-layer pcb.
Not quite the same thing, but recently I want to make adapter clips for connecting powerblocks to a barbell, making them suitable as weights for deadlift/benching. I have fusion 360 experience so I designed something to 3D print as usual, but the issue was that PLA even at 100% infill is pretty unsafe when holding 90lbs blocks.
The logical next step is to use metal, but that's outside of my hobby tools. I found that JLCPCB offered sheet metal fabrication but I had no experience with sheet metal designs. I went to ChatGPT and was actually really impressed by how well it was able to guide me from design to final model file. I received the adapters last week and was really impressed by how nice they turned out.
All of that to say, AI-assisted design is actually lowering the bar of entry for a whole lot of problems and I am quite happy about it.
The logical next step is to use metal, but that's outside of my hobby tools. I found that JLCPCB offered sheet metal fabrication but I had no experience with sheet metal designs. I went to ChatGPT and was actually really impressed by how well it was able to guide me from design to final model file. I received the adapters last week and was really impressed by how nice they turned out.
All of that to say, AI-assisted design is actually lowering the bar of entry for a whole lot of problems and I am quite happy about it.
MCP Server for KiCAD:
https://github.com/mixelpixx/KiCAD-MCP-Server
https://github.com/mixelpixx/KiCAD-MCP-Server
Ah, the elusive light emitting inductor
It can emit light once and act as a fuse.
[deleted]
In the real world where parts have costs and mistakes have consequences, the GenAI "YOLO" mode doesn't work as well.
Not LLM, just good old Monte Carlo. I made pedalgen [1] some time ago, it generate random guitar pedals, check the Results section.
[1] https://github.com/dvhx/pedalgen
[1] https://github.com/dvhx/pedalgen
As an AI skeptic, I’ve been brought around to using Claude Code to understand a codebase, like when I need to quickly find where something happens through a tower of abstractions. Crucially, this relies on Claude actually searching my codebase using grep. It’s effectively automated guess and check.
I wonder if a SPICE skill would make LLMs safer and more useful in this area. I’m a complete EE newbie, and I am slowly working through The Art of Electronics to learn more. Being able to feed the LLM a circuit diagram—or better yet, a photo of a real circuit!—and have it guess at what it does and then simulate the results to check its work could be a great boon to hands-on learning.
I wonder if a SPICE skill would make LLMs safer and more useful in this area. I’m a complete EE newbie, and I am slowly working through The Art of Electronics to learn more. Being able to feed the LLM a circuit diagram—or better yet, a photo of a real circuit!—and have it guess at what it does and then simulate the results to check its work could be a great boon to hands-on learning.
Well, using LLM as search on steroids do have big advantage that hallucinations are easy to spot and don't matter
problem is that even SPICE has poor default models for transformers etc...
I see some commenters saying “if you are an expert, the model is a productivity multiplier”
What is being said here is “I can give my model a high quality feedback loop”.
With good simulators and good access to info about latest products etc a novice can also give their model a high quality feedback loop! But they have to build it or source it from somewhere. I’m talking all the right tools to give the model a goal and let it rip.
Once that loop is built the human is out of the loop and the model has the grounding it needs to converge on a solution instead of needing constant prodding.
There’s immense opportunity for experts to create these grounding tools and productise them.
What is being said here is “I can give my model a high quality feedback loop”.
With good simulators and good access to info about latest products etc a novice can also give their model a high quality feedback loop! But they have to build it or source it from somewhere. I’m talking all the right tools to give the model a goal and let it rip.
Once that loop is built the human is out of the loop and the model has the grounding it needs to converge on a solution instead of needing constant prodding.
There’s immense opportunity for experts to create these grounding tools and productise them.
I haven't had much success yet with this. My ratings follow.
Reading and interpreting datasheets: A- (this has gotten a LOT better in the last year)
Give netlist to LLM and ask it to check for errors: C (hit or miss, but useful because catching ANY errors helps)
Give Image to LLM and ask it to check for errors: C (hit or miss)
Design of circuit from description: D- (hallucinates parts, suggests parts for wrong purpose. suggests obsolete parts. Cannot make diagrams. Not an F because its textual descriptions have gotten better. When describing what nodes connect to each other now its not always wrong. You will have to re-check EVERYTHING though, so its usefulness is doubtful)
Reading and interpreting datasheets: A- (this has gotten a LOT better in the last year)
Give netlist to LLM and ask it to check for errors: C (hit or miss, but useful because catching ANY errors helps)
Give Image to LLM and ask it to check for errors: C (hit or miss)
Design of circuit from description: D- (hallucinates parts, suggests parts for wrong purpose. suggests obsolete parts. Cannot make diagrams. Not an F because its textual descriptions have gotten better. When describing what nodes connect to each other now its not always wrong. You will have to re-check EVERYTHING though, so its usefulness is doubtful)
> Thought for 37s
> ...
> Ah - that makes sense, that's why it's on fire
oh how very relatable, I've had similar moments.
I knew about SEDs (smoke emitting diodes) and LERs (light emitting resistors), but what do you call the inductor version?
> ...
> Ah - that makes sense, that's why it's on fire
oh how very relatable, I've had similar moments.
I knew about SEDs (smoke emitting diodes) and LERs (light emitting resistors), but what do you call the inductor version?
This reminds me of the video:
"Who did your electricals?"
"My nephew Thomas!"
"Oh, so when did his house burn down?"
"Last ye.... wait how do you know his house burnt down?"
"Who did your electricals?"
"My nephew Thomas!"
"Oh, so when did his house burn down?"
"Last ye.... wait how do you know his house burnt down?"
Smoke Emitting Choke?
Would that be Rapidly Decompressing Capacitors?
...only know what an inductor is from watching a video one the youtubes where they were talking about using them on the suspensions of F1 cars and they explained their relationship to electronic circuits, forget what their actual name is.
...only know what an inductor is from watching a video one the youtubes where they were talking about using them on the suspensions of F1 cars and they explained their relationship to electronic circuits, forget what their actual name is.
Probably works pretty well with atopile.
Previous discussion: https://news.ycombinator.com/item?id=44542880
Previous discussion: https://news.ycombinator.com/item?id=44542880
I ve modified my ZigBee bathroom led light. Replaced the daughterboard with an esp32, integrated a humidity sensor and a presence sensor, another rely and a power circuit, and I now have a bathroom light that lights up automatically when someone is in the room, and turns on the extractor only if the humidity is a ove a certain level.
I ve done all this by taking photos of the circuits and asking Gemini how to do it.
I ve done all this by taking photos of the circuits and asking Gemini how to do it.
If you want a laugh, ask the LLM to draw the schematic of a basic circuit (like towards the end of a Forrest Mims III book.)
I've been 50/50 with vibe circuits recently. Gemini 2.5 gave me some really wrong designs of an advanced crowbar circuit I was playing with, but recently 3.0 Fast gave me excellent advice on an adjustable load with a hodgepodge of parts.
I've been 50/50 with vibe circuits recently. Gemini 2.5 gave me some really wrong designs of an advanced crowbar circuit I was playing with, but recently 3.0 Fast gave me excellent advice on an adjustable load with a hodgepodge of parts.
I've been using Claude Code to ssh into a Raspberry Pi in a subprocess, so I can chat with the AI from my more powerful machine, and let it write and run the code on the Pi. It's also good for writing scripts and uploading them to an ESP-32 with the Arduino CLI.
If you don't know Ben Eater, check out his YouTube channel:
https://www.youtube.com/beneater
WARNING: nerd snipe material.
WARNING: nerd snipe material.
Check out https://silixon.io/
Have used them and they’re pretty legit. Early on but have potential
This brings up a much larger discussion. How bad are LLMs at engineering? Would you trust one to build a high voltage circuit? How about a bridge?
I don't trust an LLM to write software for me without human verification, but it's not like it's that hard to verify what it writes if you understand how to write code yourself. I expect even when an LLM can layout a high voltage circuit or design a bridge that most organizations who carry liability would still be sure to audit the design with a set or two of intelligent and trained human eyes.
The trick is, LLMs are only as good as they are at writing code because of all the publicly available source code, tutorials, blog posts and Q&A it can slurp up.
We'll eventually have a discarded vibe coded silicon wafer batch. Someone will be insane enough to spend on it.
[deleted]
[deleted]
I wonder how many shots he made to get this perfect one.
I have been working on a tool that aids in circuit tuning: model circuit equations as python functions, the solution space is discrete component values, auto solve for a target spec, build the circuits, record measurements, fit error, repeat until the experiment matches predictions. It adjusts nearly every parameter between tests and converges surprisingly fast. (25% to 2% error in 3 tests for an active band pass filter)
The MVP was hand coded, leaned heavily on sympy, linear fits, and worked for simple circuits. The current PoC only falls back to sympy to invert equations, switches to GPR when convergence stalls, and use a robust differential evolution from scipy for combinatorial search. The MVP works, but now I have a mountain of slop to cleanup and some statistics homework to understand the limitations of these algorithms. It’s nice to validate ideas so quickly though.
The MVP was hand coded, leaned heavily on sympy, linear fits, and worked for simple circuits. The current PoC only falls back to sympy to invert equations, switches to GPR when convergence stalls, and use a robust differential evolution from scipy for combinatorial search. The MVP works, but now I have a mountain of slop to cleanup and some statistics homework to understand the limitations of these algorithms. It’s nice to validate ideas so quickly though.
Good metaphor for 2026..
The system is on fire
The system is on fire
yes. but it is not smooth sailing.
If you know Ben Eater, you know he built that circuit on purpose lol.
My project (https://phaestus.app/blog) takes a different approach: pre-validated circuit blocks on a fixed 12.7mm grid with standardized bus structures. The LLM picks which blocks you need and where they go, but the actual circuit design was done by humans and tested. No hallucinated resistor values, no creative interpretations of datasheets.
It's the same insight that made software dependencies work. You don't ask ChatGPT to write you a JSON parser from scratch, you ask it which library to use. Hardware should work the same way.
Still WIP and the block library needs expanding, but the constraint-based approach means outputs are manufacturable by construction rather than "probably fine, let's see what catches fire."