I fixed a parasitic drain on my car in 408 days(davidmuller.github.io)
davidmuller.github.io
I fixed a parasitic drain on my car in 408 days
https://davidmuller.github.io/posts/2023/04/10/how-i-fixed-a-parasitic-drain-in-408-days.html
514 comments
Thats insane... To consistently not close the door like that
My wife, bless her heart, leaves everything partially open. Not even just open, but she'll screw the lid on jars just enough where if I pick it up by the top they'll drop. It drives me crazy.
People always think that they are compatible if they share more or less a common understanding in big subjects, but stuff like these really test you.
One of my exes hated onion, and when I look back, this made my life way more insufferable than having to hear the (to me) weird political opinions. "Oh I'd like to have this salad but please no onion, and please don't use a knife that's used to cut onion when preparing!". "I think I smell onion, apparently they ignored the knife comment, can you tell them to pack this and maybe you can eat it back home and I'll just go to the [insert food stall name], so meet in 15 mins there?". Ugh.
One of my exes hated onion, and when I look back, this made my life way more insufferable than having to hear the (to me) weird political opinions. "Oh I'd like to have this salad but please no onion, and please don't use a knife that's used to cut onion when preparing!". "I think I smell onion, apparently they ignored the knife comment, can you tell them to pack this and maybe you can eat it back home and I'll just go to the [insert food stall name], so meet in 15 mins there?". Ugh.
When my girlfriend at the time told me she doesn't like soup (any soup, of any kind) I knew it wouldn't work out.
I've had a few girlfriends and female friends who "don't like onion". It's incredibly common. I simply never mention onion again and not once have I received a complaint about the presence of onion in pretty much every single dish I prepare. I think it's just the word they don't like.
It would be a complete deal breaker if they actually complained about onion or imagined they could taste it.
It would be a complete deal breaker if they actually complained about onion or imagined they could taste it.
Entitled to special treatment. A modern phenomenon. A good sign that you should move on to a different partner.
Second opinion from someone in a 25 year marriage: do not move to a different partner over a disagreement on onions. You'll be moving a lot.
Really curious whether this said with sarcasm or not. I think everybody has their own idiosyncrasies and it is fine to accommodate to them a little.
Asking nicely and not protesting when they didn't manage is okay in my book, to be honest. That was not the problem. Having to experience stuff like these (everyone has their quirks) regularly and learning to deal with it is the hard part in a relationship, is what I'm saying.
Having to experience weird behaviour on a more or less regular basis is not how relationships are supposed to work, thats what I'm saying. There are spouses out there who treat their partner with respect and love, not like a tool to be used to fix up anoyances in life.
Weird behavior to you.
Never underestimate how much some people hate onions, and no they won't start up a new dating site to find people like themselves :)
edit: I later saw your comment stating what you reacted to, and yup, that part is mean indeed^^
Never underestimate how much some people hate onions, and no they won't start up a new dating site to find people like themselves :)
edit: I later saw your comment stating what you reacted to, and yup, that part is mean indeed^^
Can you explain how lying to someone is a proof of respect and love?
What if it had been shellfish instead of onions and the person had suffered a life-threatening allergy resulting in anaphylactic shock?
Thats my point. Certain people just love drama, and even want casual online discussions like this one to show how dangerous the world is, and how right picky people are in being right... Drama(queen)s all around, what would our world be without first-world problems...
[deleted]
shellfish -> New wife?
I've met a lot of women who do stuff like this... I asked one why and she told me it's because they don't want to be a bother. Fully closing the door makes noise, screwing on lids can make it hard for people to open them later. So they don't. They close it just enough and leave the object in that almost there state.
I think this is more an anecdote than anything else. My wife leaves all sorts of stuff open, and it's really because she's not paying attention, i.e. most of the time she's not fully present.
I'm glad to have read this, it gives me a little comfort to see that other people deal with same issues. Sometimes I just close the door for her when she's in the restroom.
I feel like a lot of these habits come from having lived alone for a while after leaving home. I have a lot of habits that I'm 100% certain I didn't do growing up because my mom would tell me not to. I would probably have kept them if I had started living with other people later. My mom on the other hand now does the things she used to tell me not to and I can't help but think that it is related to not caring anymore after living in solitude for decades.
I'm glad to have read this, it gives me a little comfort to see that other people deal with same issues. Sometimes I just close the door for her when she's in the restroom.
I feel like a lot of these habits come from having lived alone for a while after leaving home. I have a lot of habits that I'm 100% certain I didn't do growing up because my mom would tell me not to. I would probably have kept them if I had started living with other people later. My mom on the other hand now does the things she used to tell me not to and I can't help but think that it is related to not caring anymore after living in solitude for decades.
My wife leaves the toilet door open when she's in there, which annoys me. One day I asked her why and she told me she used to do it deliberately when the children were little so she could hear what they were up to, and talk to them if they needed it. It's now just a habit. Makes sense now I know.
Everything, literally everything from the root of this thread until the parent comment applies to my wife too. I am so relieved that I can stop worrying about it now.
I'm getting older and one of the things I started to notice is that men are just there, doing things that are generally... straightforward. I mean I guess posting on hacker news is probably pretty strange to a lot of people - so ignore that.
Anyway, women however, I feel like they build these neurotic behaviors - like learned things that just stick with them forever. Like ouch, the pan was hot, don't do that again, but for EVERYTHING. So by the time they are old, just nothing they do makes any sense, to anyone, even other women.
Anyway, women however, I feel like they build these neurotic behaviors - like learned things that just stick with them forever. Like ouch, the pan was hot, don't do that again, but for EVERYTHING. So by the time they are old, just nothing they do makes any sense, to anyone, even other women.
Reminds me of the stereotype that women will tell you something that happened in the most expansive way possible with all this context that doesn't really matter while guys will just tell you what happened.
I've heard the explanation that men just tend to prefer to think in more concrete terms. "What happened" is sometimes met with a detailed social analysis filled with motivations and states-of-mind about the story that unfolded and sometimes met with some cold facts about precisely what events occurred without any speculation as to why or what impact it had on people, and this tends to split along gender lines. The classic "what are you thinking about" works the same way. Women tend to be thinking about conceptual things like their ambitions or happiness or relationships, whereas men tend to be thinking about concrete things like that one cabinet with the loose hinges in the bathroom.
This is, of course, not a universal rule. It's just an observation about tendencies.
This is, of course, not a universal rule. It's just an observation about tendencies.
Actually this might rather be coming from an autism spectrum. This work mate, a very fine programmer I must say, starts any point he might have with a few minutes long background presentation. I can't say that I get much value from that intro, but that's his way so I say let him have it. And we're never under that time pressure to need to interrupt him anyway.
you're a good team player
sounds like me, but I have ADHD :D
Where's that stereotype from? I always thought this is a basic cultural difference between people from Germanic countries vs. North America.
I find that everyone has these quirks, regardless of gender. Sometimes it makes the world a more interesting place. Sometimes it's utterly baffling. Like my friend who refuses to use tissues because his parents taught him to blow his nose with a paper towel instead. Maybe we're the weird ones for believing Big Kleenex's ads though!
One gender difference is that when these quirks are presented to men, they're a bit more likely to change to a more sensible method. Women tend to get annoyed about the male tendency to suggest solutions to everything. Annoyance can motivate stubbornness.
One gender difference is that when these quirks are presented to men, they're a bit more likely to change to a more sensible method. Women tend to get annoyed about the male tendency to suggest solutions to everything. Annoyance can motivate stubbornness.
Have you looked into an ADHD diagnosis?
IMHO it's less of a bother to have to open a jar and much more of a bother if you pick up a not-fully-closed jar by the lid and then have to clean the kitchen of jam and broken glass, but YMMV...
Agree. Also an issue with juice bottles with lots of deposition, if the cap is not on tight and you forget to check you end up with at best a hand dripping full of juice (if the cap was screwed on but did not seal, so you just got some liquid through the cap) and at worst a repainted wall (if the cap was barely even on, and shaking sent it flying).
my annoyance is primarily with the lid not closed on volatile liquids. Alcohol, vinegar, bleach, close the lid please.
I'm sure various microorganisms really appreciate the gesture.
My flatmate does this with kitchen cupboard doors, and, most annoyingly, the microwave. She'll open the microwave to stop it, takes her food out and, just ... leaves it open. Then when I close it later it will start up again with nothing inside. Arrrgh!
> My flatmate does this with kitchen cupboard doors, and, most annoyingly, the microwave. She'll open the microwave to stop it, takes her food out and, just ... leaves it open. Then when I close it later it will start up again with nothing inside. Arrrgh!
So? Hit the cancel button when you close it - you have to be right there to close it after all.
TBH, I do this too, because I hate putting in some milk to warm for cereal and getting out warm milk flavoured with and smelling of the curry we warmed last night.
Anytime the microwave oven is used for aromatic food or any meal with flavouring, leave the door open.
So? Hit the cancel button when you close it - you have to be right there to close it after all.
TBH, I do this too, because I hate putting in some milk to warm for cereal and getting out warm milk flavoured with and smelling of the curry we warmed last night.
Anytime the microwave oven is used for aromatic food or any meal with flavouring, leave the door open.
I’m learning so much from this thread.
The idea of warming milk for cereal has never crossed my mind.
The idea of warming milk for cereal has never crossed my mind.
Oh, here's another one: I eat my oats with hot water, not milk ! Kids cereals I still use (cold) milk though.
As a kid I loved hot milk on my Weet-Bix/Weetabix, but it's not something I crave as an adult!
IMO a good thing, lets them ventilate better. Not cancelling the timer is the wrong thing there.
Not sure about that. It's normal to open a microwave periodically to inspect, stir the food etc to ensure it is heating evenly. Automatically cancelling the timer each time you open it would be very annoying.
I meant, leaving the microwave open would be fine if they also cancelled the timer after being done with it.
Interesting, I think all microwaves I've had require you to press start to restart them after opening and closing the door.
Mine doesn't.
Mine doesn't even have a start button. It starts whenever the door is closed and there is at least one second left on the timer.
I learned this behaviour for a while when living with a microwave that made an annoyingly loud beep when it finished or was stopped.
Workaround: slightly ajar as default idle state for silent operation and intercept immediately before completion.
Workaround: slightly ajar as default idle state for silent operation and intercept immediately before completion.
Every microwave I’ve ever owned has had a button to turn off the beeps. Usually, a long-press on 8 or 5.
The first time I heard the annoying beeping of my microwave I opened it and cut off the piezo beeper. Have been living in blissful silence ever since.
We do this to ventilate it so that it doesn't steam up the inside of the microwave. Seems pretty sensible.
Exactly! If there is any moisture left and it can't dry, it could start to mold.
That's actually a problem with my dishwasher, which can't be left slightly open (it always closes shut), and me being a single, so it takes time to get a full machine. If I want to prevent mold I either have to start the dishwasher half empty (which is counterintuitive) or to collect the dirty dishes outside the dishwasher until enough have accumulated to fill it. But then you have all the dirty dishes lying around. Argh!
That's actually a problem with my dishwasher, which can't be left slightly open (it always closes shut), and me being a single, so it takes time to get a full machine. If I want to prevent mold I either have to start the dishwasher half empty (which is counterintuitive) or to collect the dirty dishes outside the dishwasher until enough have accumulated to fill it. But then you have all the dirty dishes lying around. Argh!
Can you pull open the top rack and use that to stop the door from automatically closing?
Lol. This sounds like my house. My spouse and my nephew (who lives with us) cannot for the life of them ever close any kitchen cabinet doors. They both always leave them ajar, never leaving them fully opening but never fully closing them. It drives me nuts.
Do the cabinets have those magnets or latches that have an annoying sound? Some people avoid the "hit" and leave them slightly ajar.
Spending a Saturday putting soft-close hinges on every cabinet door in my house was one of the best quality-of-life investments ever.
I had to consciously decide to find it cute.
It’d cause too much conflict otherwise!
It’d cause too much conflict otherwise!
Are you me from a parallel universe? My wife does this, bless her heart.
I've finally found our marriage doppelgangers!
I’ve never met a woman who could close stuff properly.
Are you married to my wife ?!
are you leaving toilet seats up or something to induce this behaviour...
All toilet users should set the seat to their preferred setting prior to using it.
I know, I'm at a loss. The kid slept in there a lot - maybe they were trying to shut it quietly to not disturb him?
> Thats insane... To consistently not close the door like that
It sounds like it happened occasionally causing the battery to drain overnight. So not necessarily improper close every time, but a dice roll.
It sounds like it happened occasionally causing the battery to drain overnight. So not necessarily improper close every time, but a dice roll.
My car beeps loudly and angrily at me if the doors are not 100% closed when I hit the close button on the fob.
With my car, trying to lock the doors just doesn't work if one is left open — not always the most obvious failure mode, but it's been enough to get me to notice something's wrong.
> With my car, trying to lock the doors just doesn't work if one is left open
for suburban single family residence dwellers with their own garage, they may not always (or ever) lock the doors while the car is parked in their locked garage.
for suburban single family residence dwellers with their own garage, they may not always (or ever) lock the doors while the car is parked in their locked garage.
Which is one of the things one must absolutely do to ensure all modules go to sleep.
No car I'm aware of requires this. If the ignition is off and the doors are all closed, the car is, for all intents and purposes, asleep. If anything, doors unlocked may be lower power... as that would disable (or, rather, not enable) alarm functionality.
The author of the linked article mentions a couple of times to lock the doors for the car to go to sleep properly.
Mine auto locks/unlocks, and will message me as I leave it if I left it ajar.
Horrible.
Tangent, but what's the rationale for car doors requiring slams? They are the only door I know, at least in common, daily life contexts, that require slamming them with the force of Thor to properly close them.
At a guess it has something to do with needing to withstand 70+ mph winds. There needs to be considerable force holding the door against its seals at all times, and in a mechanical latching system this force must come from a spring, which must be charged with energy via a good slam.
However there are minivans with electronically operated sliding doors, which either power the latch allowing you to gently close the door, or (going further) powering the entire closing operation at a button push. I surmise the reason we see it moreso on minivans is because 1) it is particularly difficult to work up enough energy to properly latch a sliding door, due to losses from the 90-degree change in direction at the end, and 2) violently slamming the sliding doors on a minivan is very dangerous to children's fingers.
However there are minivans with electronically operated sliding doors, which either power the latch allowing you to gently close the door, or (going further) powering the entire closing operation at a button push. I surmise the reason we see it moreso on minivans is because 1) it is particularly difficult to work up enough energy to properly latch a sliding door, due to losses from the 90-degree change in direction at the end, and 2) violently slamming the sliding doors on a minivan is very dangerous to children's fingers.
It's not about wind pressure. It's that the door when properly closed becomes an integral, load-bearing part of the car's structure. In the event of a crash or rollover, an incompletely-closed door makes the car much weaker and less protective of the occupants.
It's about wind pressure only for doors that have the hinge at the back (I think those also have safety systems that prevent them from being opened while the car is moving). For the more common ones that have the hinge at the front, wind pressure will actually keep the door closed.
I'm not sure I buy this - how is load being transferred through the door? Surely not through the rubber seals, those have minimal shear strength even when compressed. That leaves the hinges, which are certainly robust enough, and the latch, which unless I'm mistaken is only designed to secure the door from opening (usually they engage with some sort of rod or peg, which can't transfer torsional or axial force (i.e. the latch is free to slide along or around the peg).
[deleted]
Luxury cars like MB and BMW also have a soft-close door mechanism for the normal driver and passenger side doors. There's a cam that pulls it in the last few centimeters.
I'm not sure how much money I'd pay for it, but it's a nice feature.
I'm not sure how much money I'd pay for it, but it's a nice feature.
> I surmise the reason we see it moreso on minivans is because 1) it is particularly difficult to work up enough energy to properly latch a sliding door, due to losses from the 90-degree change in direction at the end, and 2) violently slamming the sliding doors on a minivan is very dangerous to children's fingers.
There is also a third, dumber reason, at least for cargo van slide-doors. The surface area of sliding doors are large. When the door takes that 90 degree turn and moves very fast towards the vehicle, it is pushing a lot of air into the vehicle. The air in the vehicle has nowhere to go, so it acts as an air-spring, slowing down the door. To properly latch the door, you have to really slam it hard. If the windows are down or an other door is open, the sliding doors latches very easily. I thought I was going crazy when my door was closing easily ... sometimes. Some cargo vans even have vents that allow air to escape, but people tend to cover them because they don't know what it's for. But electric sliding doors also solve this problem, by moving slowly and letting the air escape.
TLDR: if you car door doesn't close, open the window :)
There is also a third, dumber reason, at least for cargo van slide-doors. The surface area of sliding doors are large. When the door takes that 90 degree turn and moves very fast towards the vehicle, it is pushing a lot of air into the vehicle. The air in the vehicle has nowhere to go, so it acts as an air-spring, slowing down the door. To properly latch the door, you have to really slam it hard. If the windows are down or an other door is open, the sliding doors latches very easily. I thought I was going crazy when my door was closing easily ... sometimes. Some cargo vans even have vents that allow air to escape, but people tend to cover them because they don't know what it's for. But electric sliding doors also solve this problem, by moving slowly and letting the air escape.
TLDR: if you car door doesn't close, open the window :)
Plus they're often used by kids who might not have the body weight to give a good slam.
They rarely require a slam. You can soft-close the door, then lean on the outer edge enough to engage the latch.
Often, the door just isn't aligned correctly. Either it's sagged on it's hinges over time, or the latch itself needs a minor alignment/adjustment (Note that even on a lot of new cars, this still helps a lot! Not all manufacturing is perfect). Other times the rubbers can be hard and perished and it doesn't allow the mechanism to engage properly.
Often, the door just isn't aligned correctly. Either it's sagged on it's hinges over time, or the latch itself needs a minor alignment/adjustment (Note that even on a lot of new cars, this still helps a lot! Not all manufacturing is perfect). Other times the rubbers can be hard and perished and it doesn't allow the mechanism to engage properly.
[deleted]
I think one of the reasons is air pressure inside the car.
I've always found it amazing how much less slamming the doors needed when a window was left wide open and the air inside the car could escape freely.
I've always found it amazing how much less slamming the doors needed when a window was left wide open and the air inside the car could escape freely.
My last two (severely low end) cars had a function that opened slightly one window when there was just one door open,for this reason... To allow the last door to close without excessive force.
On one of the cars it wasnt enabled from factory, but I asked the dealership and they enabled it at no cost.
On one of the cars it wasnt enabled from factory, but I asked the dealership and they enabled it at no cost.
It's fascinating how doors and windows in a house interact with air pressure. The way doors act when a window is closed versus open, how a half-out-of-frame door will open when a door to the garage on the other end of the house is opened, active central air holding an ajar door against it's frame, etc.
[deleted]
The solidness is an indicator of quality. Apocryphally Mercedes used to add lead weights to their doors to get that solid 'thunk'. Nowadays car manufacturers are a little more subtle at it -- there's a lot of engineering that goes into how a car door feels and sounds to give that impression which is very much intentional.
AFAIK a lot of engineering goes into the hinge to make a car door feel heavy. Meanwhile the average person can easily carry two around without too much effort.
Car doors are unlike any other door in your common, daily life contexts. They are not rectangular. They are heavy and float several inches above the ground. They have hydraulics and/or springs, and typically have two fixed points where they will remain open, even in moderately high winds. They have electronics, power windows, crumple zones, and side airbags. They lock remotely. Their latches and handles are very different from other doors.
A car door is like a bedroom door in the same way a MacBook is like a Cray supercomputer. A door is a door and a computer is a computer, but there is significant variance within that category.
A car door is like a bedroom door in the same way a MacBook is like a Cray supercomputer. A door is a door and a computer is a computer, but there is significant variance within that category.
I got a new(used) car which has power closing doors - you just bring them close to the car and the motors gently pull them closed.
Luxury feature because you never slam or even shut the doors anymore, they are closed soundlessly.
I didn't know I wanted the feature till I got this car...now I wish all cars had this. I bet I won't feel the same when I have to pay a thousand dollars to get a single motor replaced.
Look around the door the next time you open it. You are compressing a rubber gasket that keeps out noise/water etc. out.
They don’t require slamming at all. Just pull them closed. It’s really very easy. Follow through.
Why would leaving the door open drain the battery is there is no light whent he door is open ?
I can only guess:
Probably some vehicle control unit (multimedia/dashboard) thought it had to stay powered on. Door is not fully closed - driver might want to enter the vehicle again any minute and start driving again. better keep the infotainment/vehicle computer in an alive state so the driver experience is not interrupted by a booting system once he re-enters.
Well this is timely. I have a parasitic draw on my NC Miata. The first mechanic just replaced the battery. The second told me it's normal for the battery to die if you don't drive it for 3 days (because "cars have computers now"). It seems like mechanics really don't like digging into the electrical part of the car... but these days that encompasses more and more of what can go wrong.
Without time to dig into it myself I've just been parking it with a battery tender every time I come home.
Without time to dig into it myself I've just been parking it with a battery tender every time I come home.
> It seems like mechanics really don't like digging into the electrical part of the car...
Tell me about it. I'm in a similar boat. My audi a4 has had a parasitic draw for the past 10 years. My mechanic didn't want to take the time to address it because that sort of thing takes a serious amount of time and he's always backed up. I got out my fluke and narrowed the cause to what I believe is the comfort control unit. I can't replace it myself because it's a coded part. My mechanic won't do it because he won't confirm that's the cause.
None of the other mechanics in my area have the equipment. Even the Audi dealership won't touch it because they're backed up too. So, I keep a battery jumper in the glove box and hook the battery up to a tender when I can (outdoor parking).
I don't know what I'm going to do for my next car. Pretty much every car made after 2010 has coded parts and are more computer than mechanical. It does make me tempted to learn the electronics part and open a garage that focuses specifically on fixing electronic issues in modern cars.
Tell me about it. I'm in a similar boat. My audi a4 has had a parasitic draw for the past 10 years. My mechanic didn't want to take the time to address it because that sort of thing takes a serious amount of time and he's always backed up. I got out my fluke and narrowed the cause to what I believe is the comfort control unit. I can't replace it myself because it's a coded part. My mechanic won't do it because he won't confirm that's the cause.
None of the other mechanics in my area have the equipment. Even the Audi dealership won't touch it because they're backed up too. So, I keep a battery jumper in the glove box and hook the battery up to a tender when I can (outdoor parking).
I don't know what I'm going to do for my next car. Pretty much every car made after 2010 has coded parts and are more computer than mechanical. It does make me tempted to learn the electronics part and open a garage that focuses specifically on fixing electronic issues in modern cars.
> My mechanic won't do it because he won't confirm that's the cause.
My experience is that a lot of independent mechanics will do what you ask them to do, so long as they think it’s not unsafe and have confidence that you’ll pay the bill without complaint when the task is done whether or not the problem is fixed.
Probably not a good “this is my first time meeting you, but please replace my flux capacitor” but if you’ve got a history with the shop, I’m surprised you couldn’t talk him into it. (I worked in a shop briefly in college. We’d do what the customer wanted, including installing parts they bought, but the only warranty was on a “we spent an hour; you paid for an hour; thus ends the transaction” basis.)
My experience is that a lot of independent mechanics will do what you ask them to do, so long as they think it’s not unsafe and have confidence that you’ll pay the bill without complaint when the task is done whether or not the problem is fixed.
Probably not a good “this is my first time meeting you, but please replace my flux capacitor” but if you’ve got a history with the shop, I’m surprised you couldn’t talk him into it. (I worked in a shop briefly in college. We’d do what the customer wanted, including installing parts they bought, but the only warranty was on a “we spent an hour; you paid for an hour; thus ends the transaction” basis.)
Yes. I had a problem with a leaking transmission once and the shop refused to accept my diagnosis because "in all my years servicing transmissions, I never heard of that failing."
Finally, the service manager agreed to check it out with the understanding that if I was wrong, I still had to pay for the time they spent investigating.
I was right :-)
Finally, the service manager agreed to check it out with the understanding that if I was wrong, I still had to pay for the time they spent investigating.
I was right :-)
Debugging spider sense is definitely an upside of spending years working with terrible code.
I once moved into a place that was great, except the shower would start out hot, quickly drop to warm, and then stay warm for as long as we cared to try it. I hated this, so every time I showered I'd spend some time trying to debug it, despite knowing nothing about plumbing.
Eventually I asked myself: why do normal hot water heaters work the other way, where they stay hot a long time and then get pretty cold? Clearly, there's some way of keeping the incoming cold water separate from the already-heated hot water, like by putting the output pipe at the top and the input pipe at the bottom. But if you reverse them, you might get what we had.
I leapt out of the shower and felt the hot water heater pipes and sure enough, reversed. My landlord came over shortly thereafter and fixed it, and I felt very smug when I had my first properly hot shower.
I once moved into a place that was great, except the shower would start out hot, quickly drop to warm, and then stay warm for as long as we cared to try it. I hated this, so every time I showered I'd spend some time trying to debug it, despite knowing nothing about plumbing.
Eventually I asked myself: why do normal hot water heaters work the other way, where they stay hot a long time and then get pretty cold? Clearly, there's some way of keeping the incoming cold water separate from the already-heated hot water, like by putting the output pipe at the top and the input pipe at the bottom. But if you reverse them, you might get what we had.
I leapt out of the shower and felt the hot water heater pipes and sure enough, reversed. My landlord came over shortly thereafter and fixed it, and I felt very smug when I had my first properly hot shower.
I once spent over a year debugging a furnace. It would run fine, except every now and then on it would just refuse to turn on for a day or two. Eventually noticed it was only rainy days, and was due to it thinking the exhaust was blocked because there wasn't enough pressure differential between input air and exhaust.
Turned out the installer had failed to put in the high altitude kit which told it to expect a smaller pressure differential. Mostly it was fine, but on rainy days with low barometric pressure, the difference would drop below threshold. But I had to be home for enough rainy days to figure it out.
Turned out the installer had failed to put in the high altitude kit which told it to expect a smaller pressure differential. Mostly it was fine, but on rainy days with low barometric pressure, the difference would drop below threshold. But I had to be home for enough rainy days to figure it out.
Ooh, well spotted. Correlation is correlated with causation!
> Correlation is correlated with causation!
That's a great quote. I think I'll use that instead of "where there's smoke ..." from now on.
That's a great quote. I think I'll use that instead of "where there's smoke ..." from now on.
This was me with a Suzuki vstrom with a bad solenoid. Mechanic ran 12 volts through it on the bench and refused to accept it wasnt working in the bike.
Bought my own solenoid online and surprise the bike started working again.
Bought my own solenoid online and surprise the bike started working again.
They were unit testing when they needed to be integration testing.
I've done that twice with some shops I didn't have any history with.
Once I got them to replace my gearbox oil even though they said it wasn't needed. With another one I brought them a third-party pedal and asked them to install it. In both cases it did solve my issue by the way, even though I might have been wrong.
They don't care as long as you're ok to pay for the hours regardless of whether it solves your problem or not.
Once I got them to replace my gearbox oil even though they said it wasn't needed. With another one I brought them a third-party pedal and asked them to install it. In both cases it did solve my issue by the way, even though I might have been wrong.
They don't care as long as you're ok to pay for the hours regardless of whether it solves your problem or not.
The problem with specializing in these issues is that most customers will be dissatisfied when you charge them thousands of dollars to reset a minor module on their car.
How many hours of shop time are you willing to pay for with no guarantee of a solution, and very few (if any) parts replaced?
How many hours of shop time are you willing to pay for with no guarantee of a solution, and very few (if any) parts replaced?
> How many hours of shop time are you willing to pay for with no guarantee of a solution, and very few (if any) parts replaced?
Imagine opening a computer software support business where you bring in your old proprietary binary programs that you got from who knows where, and the business is to fix bugs you've found.
Maybe some really big enterprises would pay for that sort of thing. But I doubt it would be feasible for consumer stuff.
It would be a crazy/fun kind of business to run. I'm sure it probably exists.
Imagine opening a computer software support business where you bring in your old proprietary binary programs that you got from who knows where, and the business is to fix bugs you've found.
Maybe some really big enterprises would pay for that sort of thing. But I doubt it would be feasible for consumer stuff.
It would be a crazy/fun kind of business to run. I'm sure it probably exists.
There are companies around that offer VIN re-coding by mail order if you need to swap one of the computers, but you'd have to be in a fairly big metro area to profitably run a company just doing electronic trouble shooting. It's easier just to "fire the parts cannon" after the usual suspects (dead sensors, shorted wiring) have been accounted for.
Having had a 2006 model car in my workshop forever rebuilding the engine, I have though it might be worthwhile starting a business doing that kind of trouble shooting but nobody will want to pay, because the vehicles involved are inevitably old and worthless. It's fun to do it for yourself, but as a business your typical customer who needs you won't be able to justify paying you.
My other thought was to possibly set up the tools and whatnot to support local businesses in doing that kind of troubleshooting on older cars but building the knowledge and tools to distribute would be a very expensive exercise.
Having had a 2006 model car in my workshop forever rebuilding the engine, I have though it might be worthwhile starting a business doing that kind of trouble shooting but nobody will want to pay, because the vehicles involved are inevitably old and worthless. It's fun to do it for yourself, but as a business your typical customer who needs you won't be able to justify paying you.
My other thought was to possibly set up the tools and whatnot to support local businesses in doing that kind of troubleshooting on older cars but building the knowledge and tools to distribute would be a very expensive exercise.
> fire the parts cannon
I love this phrase, and it reminds me that the behavior exists in the computer world too. From the Jargon File:
field circus: [a derogatory pun on `field service'] n. The field service organization of any hardware manufacturer, but especially DEC. There is an entire genre of jokes about DEC field circus engineers:
Q: How can you recognize a DEC field circus engineer with a flat tire?
A: He's changing one tire at a time to see which one is flat.
Q: How can you recognize a DEC field circus engineer who is out of gas?
A: He's changing one tire at a time to see which one is flat.
I love this phrase, and it reminds me that the behavior exists in the computer world too. From the Jargon File:
field circus: [a derogatory pun on `field service'] n. The field service organization of any hardware manufacturer, but especially DEC. There is an entire genre of jokes about DEC field circus engineers:
Q: How can you recognize a DEC field circus engineer with a flat tire?
A: He's changing one tire at a time to see which one is flat.
Q: How can you recognize a DEC field circus engineer who is out of gas?
A: He's changing one tire at a time to see which one is flat.
That actually sounds like a great business idea.
Bug Hunters
Extremely valuable service. I bet there'd be a lot of demand.
Bug Hunters
Extremely valuable service. I bet there'd be a lot of demand.
[deleted]
I've toyed with that kind of thought. The technical part seems fun, finding customers (especially the first customers) seems difficult :p I'd really like to work at such a company though.
This feels like something (former?) malware researchers might do. It’s entertaining when they reverse engineer malware and find bugs.
Actually had this problem in PC repair. A lot of times I'd spend hours/days diagnosing an issue just so I could understand it inside and out and have a quick solution for the future. I could almost never bill customers for it since it would've cost hundreds of Euros (easily going into 1000+) for what ended up being a fairly simple fix (the $10.000 to hit a pipe with a hammer phenomenon). I'm just lucky I had enough slack to be able to do in-depth diagnoses, because it saved me fuckloads of time later on.
Then there were the cases with arbitrary random bluescreens that were impossible to diagnose where I'd upfront tell them I could only do the bare minimum because otherwise they might have to pay 500 Euros for a solution that probably wouldn't work.
Then there were the cases with arbitrary random bluescreens that were impossible to diagnose where I'd upfront tell them I could only do the bare minimum because otherwise they might have to pay 500 Euros for a solution that probably wouldn't work.
Dude's been tending his issue for a decade, I bet he'd have at least those like him as a customer. In a metro he might have a pretty lucrative business. On the other hand in the metro there is probably someone who already does this work, but they are very hard to find!
How do potential customers find your specialized shop?
Most people will give up, stop researching and buy a new car when the dealer tells them it can't be fixed.
Most people will give up, stop researching and buy a new car when the dealer tells them it can't be fixed.
Ford lied to its own dealership when my coworker went to them about a transmission slip with his 2012 Ford Fiesta.
He had the people at the dealership drive the car. They acknowledged the problem and got on a call together with Ford. Ford refused to even entertain the idea there was a flaw but less than a year later they came up with a "software patch".
Pete would bring it up with anyone he met. Do not buy a Ford Focus / Ford Fiesta with automatic transmission.
He had the people at the dealership drive the car. They acknowledged the problem and got on a call together with Ford. Ford refused to even entertain the idea there was a flaw but less than a year later they came up with a "software patch".
Pete would bring it up with anyone he met. Do not buy a Ford Focus / Ford Fiesta with automatic transmission.
Word of mouth w/ cars is hugely important. Anybody with a good mechanic will tell you about them.
Shoutout to "The Hondew Shop" in Dallas. He does great work on all Honda/Acura products!
Shoutout to "The Hondew Shop" in Dallas. He does great work on all Honda/Acura products!
If you can identify the fuse for the unit, it might be less annoying to pull it when parking rather than hooking up a charger.
I wired in an aftermarket DVD player in an old car and tapped into a fuse that was supposed to not draw power when off. Of course, it did draw power so the DVD player never shut off. It wasn't too much of a draw but I didn't want to end up with a dead battery situation because of it so my solution was to just plug the fuse tap in when the kids were in the car and wanted to watch something.
I'm sure there was a more elegant solution (find a different fuse, rig up a button, etc.) but this was the path of least resistance and wasn't really annoying to do.
I'm sure there was a more elegant solution (find a different fuse, rig up a button, etc.) but this was the path of least resistance and wasn't really annoying to do.
“path of least resistance” is very fitting.
Definitely a cool, new term! Thanks to the GP for introducing it to my lexicon.
You also might enjoy this joke then:
https://i.pinimg.com/originals/a4/c5/bb/a4c5bbd867b819a687ea...
https://i.pinimg.com/originals/a4/c5/bb/a4c5bbd867b819a687ea...
Aftermarket head units should have two power inputs - one for standby, and one that only gets power when "accessory power" is on. Every car I've owned I've been able to wire it up so that works, then it only turns fully on when the car is on.
I avoid very new cars like the plague though, so not sure how different they are.
It makes me anxious thinking about all the bullshit in new cars - touch screens, coded parts, 4G connections with GPS tracking, etc etc.
I avoid very new cars like the plague though, so not sure how different they are.
It makes me anxious thinking about all the bullshit in new cars - touch screens, coded parts, 4G connections with GPS tracking, etc etc.
This was an rear-seat overhead DVD player, not a console one. Although, I probably would have been better off wiring to the head unit instead. At the time, I still had the factory one in there so it's not quite as expandable and more complicated to add stuff to.
That's a great idea. I can't believe I didn't think of that. Thanks!
If it were me, I would pull the fuse, then jumper the block over to a different fuse on a circuit that is off when the ignition is off. Then you never have to think about it again.
Pulling fuses is a pretty reliable way to find the relevant fuse in the first place. If the battery doesn't run down while a particular group of fuses is pulled, the one you want to pull is in that group. Start with half the fuses, then narrow down.
You might have to reprogram your radio channels...
You might have to reprogram your radio channels...
I can recommend searching for "South Main Auto parasitic draw" on YouTube. The guy is a genius at electrical troubleshooting.
His strategy isn't to pull fuses, it's to set the car sit for at least 30 minutes or so (with key off) and then check each fuse with a multimeter to see which has current on it, and then check everything on that circuit. Arm yourself with schematics and wiring diagrams, otherwise it'll end up being something of a wild goose chase.
(The idea being if you start pulling fuses, you can "reset" various computers in the car, which may show up as a false positive. It can take up to 30 minutes or so for all the various computers in a car to all go to sleep, although it's usually only a few minutes for most cars.)
His strategy isn't to pull fuses, it's to set the car sit for at least 30 minutes or so (with key off) and then check each fuse with a multimeter to see which has current on it, and then check everything on that circuit. Arm yourself with schematics and wiring diagrams, otherwise it'll end up being something of a wild goose chase.
(The idea being if you start pulling fuses, you can "reset" various computers in the car, which may show up as a false positive. It can take up to 30 minutes or so for all the various computers in a car to all go to sleep, although it's usually only a few minutes for most cars.)
"Pine Hollow Auto Diagnostics" is also a very good source.
It would take someone more skilled than I, or with better tools, to check current in a fuse box without removing fuses. Maybe I should watch that guy and get better...
You measure the voltage across the fuse. Then you look up the fuse's resistance in a datasheet. Current is Voltage / Resistance.
AFAIK the fuses have contact points you can use to measure the current.
You can check continuity across the contact points, but measuring a 75mA current via the voltage drop across a 0.0034ohm resistance (give or take) means reading 0.2mV, which is… borderline for a consumer multimeter.
I wonder if one couldn't identify the time it takes for the battery to get to some low point (50%?) and then determine the order of magnitude draw they would be looking for. 75mA would take a long time (I think) to drain the battery to where starter can't turn over (like a week?).
A multimeter is cheap and really easy to use. This is the safest way also
WiFi arduino + disconnect relay on the battery.
Completely disconnect battery when not in use.
Completely disconnect battery when not in use.
Make sure your relay is rated for enough current.
Yeah, I had an old car where the useless tape deck developed a short (I think) that would drain the battery after about a day. I didn't know it was the stereo until I played around with removing fuses one by one though.
> I can’t replace it myself because it’s a coded part.
Can you please explain this? Why does it need ‘coding’? It’s not a VIN specific part I’d think - i.e. engine controller. Also have you explored Ross Tech VCDS tool? You might be able to identify the coding on your part and use it on a new part. Replacing an ecu should be straightforward imo.
Can you please explain this? Why does it need ‘coding’? It’s not a VIN specific part I’d think - i.e. engine controller. Also have you explored Ross Tech VCDS tool? You might be able to identify the coding on your part and use it on a new part. Replacing an ecu should be straightforward imo.
In VAG cars, the ECU and dashboard are often paired to each other for anti-theft purposes, since the immobilizer is part of the ECU itself. To stop people from simply pulling the ECU and replacing it with one keyed to the immobilizer key chip they have - the ECU is paired to the dashboard, which often requires a lot more time and effort to remove.
For other modules they're often used across many different cars/engine/transmission/body type and regulatory markets. "Coding" a module tells it what accessories/options it's connected to, what else is in the car, what regulatory market it is in, and so on.
There's also "coding" for how the module behaves with certain features. For example, body control modules on US cars won't allow you to use the remote to roll up the windows, but by flipping one of the coding bits, you can enable it. There's also silly stuff like enabling / disabling gauge sweep on the dash.
(Explaining this mostly for others, you seem aware of at least some of this)
For other modules they're often used across many different cars/engine/transmission/body type and regulatory markets. "Coding" a module tells it what accessories/options it's connected to, what else is in the car, what regulatory market it is in, and so on.
There's also "coding" for how the module behaves with certain features. For example, body control modules on US cars won't allow you to use the remote to roll up the windows, but by flipping one of the coding bits, you can enable it. There's also silly stuff like enabling / disabling gauge sweep on the dash.
(Explaining this mostly for others, you seem aware of at least some of this)
Yes I work in automotive and have routinely replaced ECUs. I work for an American OEM, I guess we don’t pair ecus to each vehicle. Unless its ecm/tcm/radio/security gateway and probably the key fob ecu. Everything else is just a part number that you can easily swap out. The few screws holding the controller and the wiring connector(assuming the controller is easily accessible)…
Though I own an Audi and use VCDS I was not familiar with pairing an ecu to the vehicle, however I was aware of coding in the VCDS. (I have not yet needed to swap an ecu on my car)
>Replacing an ecu should be straightforward
Really? I would have thought that'd be one of the most complicated things to replace.
Really? I would have thought that'd be one of the most complicated things to replace.
I’d say an engine controller which needs a specific vehicle information to work is going to be difficult.
But an ecu that controls say your headlights, depending on the oem it is just a part with unique part# that can be swapped. I work for one of the American OEMs and have replaced a ton of controllers on vehicles (engineering vehicles and customer vehicle). never had an issue. That being said I know German vehicles are next level pita since I do own an Audi. I just wasn’t aware about the coding part for the Audis.
> Even the Audi dealership won't touch it because they're backed up too.
Getting an appointment at my Audi dealer is always 6+ week minimum wait. I don't think I've ever dealt with a dealer this consistently backed up. And my issues have been recalls and brake problems; but simple oil change is a similar wait time.
Getting an appointment at my Audi dealer is always 6+ week minimum wait. I don't think I've ever dealt with a dealer this consistently backed up. And my issues have been recalls and brake problems; but simple oil change is a similar wait time.
I wonder if installing a switch to disconnect the car's battery entirely would be an acceptable (but obviously hacky) solution.
Not really, When powered down(battery diconnected) the computer then has to re learn parameters/pass internal validity checks. On a well preforming system this will be done in as little 1 or 2 rides but on a marginal system this can take many rides. the computer may not enter closed loop mode until these checks pass.
closed loop mode is where the computer set it's output values(fuel air ratio, timing etc) based on it's input sensors. open loop mode is where it sets it's outputs on known safe working values, but it may not run particularly well. i think this is related to the so called "limp mode"
Note My knowledge on this subject is very out of date. I had to figure it out for my old 2001 car. Newer vehicles may actually have flash storage and the computer parameters survive power out.
closed loop mode is where the computer set it's output values(fuel air ratio, timing etc) based on it's input sensors. open loop mode is where it sets it's outputs on known safe working values, but it may not run particularly well. i think this is related to the so called "limp mode"
Note My knowledge on this subject is very out of date. I had to figure it out for my old 2001 car. Newer vehicles may actually have flash storage and the computer parameters survive power out.
Yes, my Audi did not like being disconnected from power. If I remember correctly, it didn't go into limp mode but it was in some partial alarm state when it reconnected such that one had to mimic the Contra cheat code with their fob to get it to shut up. I jest, but yeah. Battery dead was not a condition with a transparent recovery.
Not to mention more minor annoyances like losing radio stations and other settings.
It's insane that this keeps happening. Computers can remember BIOS settings for probably 40+ years now.
They use a battery backup. The main symptom of having a dead cmos battery is that your computer starts loosing it's cmos settings, it's a feature not a bug. I have a system where it keeps the cmos config on flash. the only system I managed to brick(almost). I put a bad config in(never disable usb on a laptop where everything is usb) and there was no easy way to reset it. I had to buy a sioc clip and a chip programmer to reflash the thing the hard way.
The point is all cars have a wonderful battery backup system, and resetting the computer when power is lost is also a nice feature.
The point is all cars have a wonderful battery backup system, and resetting the computer when power is lost is also a nice feature.
Yeah, there are lots of ways cars could store such settings that wouldn't be cleared when main battery power is disconnected (which is something that regularly needs to be done when the car is serviced). Flash storage would work too.
This isn't a good idea for an Audi. The computer doesn't like going without electricity. It runs a bit rough for a day or two afterwards and sometimes will "forget" how much gas is in the tank.
Some newer vehicles get upset when you do that, but older ones generally don't. You may lose radio programming though. I've got an old '95 Caravan that's going to be getting a quick disconnect like this one pretty soon though; the drain takes a few weeks to kill the battery, but we don't drive it very often either. Why do we still own it? With the back seats removed, you can easily put 8'x4' sheets of plywood in it.
I did this with an old vehicle taht was pretty basic without a lot of electronics.
the actual problem was sort of electronic-releated - leave lights on, drain battery to zero.
I put on a battery-cutout-monitor-thing. If battery drained to x%, it would disconnect the battery. to start the car, I think you had to stand on the brake pedal (add a load - like brake lights?) and it would reset and reconnect the battery - then you could start it.
the actual problem was sort of electronic-releated - leave lights on, drain battery to zero.
I put on a battery-cutout-monitor-thing. If battery drained to x%, it would disconnect the battery. to start the car, I think you had to stand on the brake pedal (add a load - like brake lights?) and it would reset and reconnect the battery - then you could start it.
this sounds like the sort of perfectly reasonable system that the original manufacturer could install in order to save the world from buying several hundred thousands replacement car batteries every year.
That would depend on the car brand. Not so good idea in some brands.
Assure to write somewhere your radio code password first.
Assure to write somewhere your radio code password first.
Everyone should keep a jumper in their glove box.
It's with the price just to see the looks on the faces of stranded motorists you help jump start in one or two minutes after they've been trying for an hour to jumpstart a minivan with a hatchback.
It's with the price just to see the looks on the faces of stranded motorists you help jump start in one or two minutes after they've been trying for an hour to jumpstart a minivan with a hatchback.
Have you consulted an auto electrician?
In Australia Automotive Electronician is a trade itself.
A good mechanic should be able to point you to their preferred auto electrical workshop when they suspect an issue is outside their own scope.
In Australia Automotive Electronician is a trade itself.
A good mechanic should be able to point you to their preferred auto electrical workshop when they suspect an issue is outside their own scope.
What are coded parts? I spent a minute googling and couldn’t come up with anything that seemed right.
I believe this means that the part's computer has the vehicle's VIN loaded into it with a computer that can only be purchased/used by a certified technician. If he was to buy a new part, it would have a blank VIN; and if he pulled one from a junker, it would have that car's VIN.
(edit: should also say, I think a VIN mismatch would cause the ECU to refuse to work with that part and shut down)
(edit: should also say, I think a VIN mismatch would cause the ECU to refuse to work with that part and shut down)
Well that's dumb. I've never heard of that before. But I guess I shouldn't be surprised. Thanks!
It gets even more fiendish than that - you can have entire linked dependencies of locked modules. My old Saab’s key was locked to the security computer, to the column immobilizer, then to the engine computer.
Lost one key? Bummer. Lost all your keys? $2500, several hours of reprogramming time at the dealer, and a bunch of new parts shipped over from Trollhattan.
Thankfully the hacking scene has managed to bypass lots of this as Saab no longer exists to make parts. But this was the state of the art in 2003. I’m sure it’s even worse now.
Lost one key? Bummer. Lost all your keys? $2500, several hours of reprogramming time at the dealer, and a bunch of new parts shipped over from Trollhattan.
Thankfully the hacking scene has managed to bypass lots of this as Saab no longer exists to make parts. But this was the state of the art in 2003. I’m sure it’s even worse now.
It's going to get worse - on most cars the CAN bus is not encrypted and the messages are not signed. There was a comment here recently where a tech in the auto industry claimed that one manufacturer was planning to start signing the CAN bus packets. That will mean it likely becomes impossible to do things like re-code the PCM for a motor with a different VIN so you can re-use the PCM in another vehicle.
That will be quite hard to overcome.
That will be quite hard to overcome.
I'm looking into buying a reliable older vehicle, pre 2000, and just rebuilding the engine
I drive a 1998 Jeep Grand Cherokee. I get asked if I'm interested in selling it at least once or twice a month, nowadays. The sightlines are amazing compared to modern cars, its AC is OP, and the AMC 4 liter straight six is one of the most durable car engines ever made. Mileage is not great, but it's paid for and dirt cheap to insure, that buys a lot of gas right there.
Inline 6 has to be one of the best engines. I got 3 cars with them in 4L, gas injected, gas carbureted and diesel. They go so well.
The only computer in the diesel one is the glow plug timer and there is no computer in the carbureted one (both 1991 Nissan Patrols).
The injected one is a 2005 ford falcon and is starting to get all sorts of interior electrical niggles. Only wiring issues in the patrols is a left headlight short which was easily routed around using relays.
The only computer in the diesel one is the glow plug timer and there is no computer in the carbureted one (both 1991 Nissan Patrols).
The injected one is a 2005 ford falcon and is starting to get all sorts of interior electrical niggles. Only wiring issues in the patrols is a left headlight short which was easily routed around using relays.
Nice, I had a 97 Jeep Grand Cherokee and it was a great vehicle. I did have a problem with the doors falling off, which I think was a defect at the time.
Heh. Yeah, terminal door sag is an issue with these. I think I'm on my third set of hinge pins. At least they're easy to replace!
If car is at the point of engine rebuild you'd probably have to replace half of the suspension too
At least! When my engine finally needed a rebuild, so did the transmission, steering box, CV joints, and center differential. And you're right, it needed new bushings, shocks, springs, and balljoints.
Yeah, I recently bought a car (I had driving license for 15 years before that but for 14 of them I didn't drive coz I moved to the big city), and basically bought one of cheapest, had to replace dampers last year, this year one of springs broke, one of calipers have some problems and apparently one of previous owners installed lambda probe emulator to hide dead catalytic converter...
Tho a bunch of that might be because I bought "sporty car" and those rarely have easy life in the first place...
Tho a bunch of that might be because I bought "sporty car" and those rarely have easy life in the first place...
"need" starts being a very subjective word when talking about some of these components at high milage.
"While I'm at it might as well"
And honestly on something that used it might be the best, taking it apart again just to replace the thing you thought you might not need to is PITA
And honestly on something that used it might be the best, taking it apart again just to replace the thing you thought you might not need to is PITA
How high do used car prices have to rise before a full rebuild starts to look cost effective?
I had similar with my ‘15 Amarok. Battery would reliably be flat after parking for 24h, and I was either told there was no issue or it was unfixable, or I would need a new ECU, a new engine, a new truck.
After a short and inconclusive session looking for leaks through the fuse box, and then many, many hours of crawling around under the truck with a voltmeter, I discovered a frayed and heavily corroded +12v lead associated with the tow harness rubbing against the chassis. Fixed it. Issue resolved.
Unfortunately, a majority of mechanics simply aren’t competent, and the remainder don’t want to touch jobs which are mysteries, as they’ll just end up with a customer refusing to pay.
After a short and inconclusive session looking for leaks through the fuse box, and then many, many hours of crawling around under the truck with a voltmeter, I discovered a frayed and heavily corroded +12v lead associated with the tow harness rubbing against the chassis. Fixed it. Issue resolved.
Unfortunately, a majority of mechanics simply aren’t competent, and the remainder don’t want to touch jobs which are mysteries, as they’ll just end up with a customer refusing to pay.
Probably should get a brand more reliable than Audi...
After my Audi I learned I'm never buying another German car. Hard to work on myself, absurdly expensive for the shops to work on them, parts are very expensive. Since most owners seem to be "of a demographic" that does not mod/repair their vehicles, the online community pales compared to some other brands where this is a bigger part of the ownership culture, IME. Yes, I know there are passionate Audi modders and repair forums out there, but I'm referring to a percentage of the ownership base and in comparison to communities around other makes.
The Audi was great fun to drive though, no denying that. Just different priorities in what I want out of a car.
The Audi was great fun to drive though, no denying that. Just different priorities in what I want out of a car.
I hear people say that about my BMW, and realistically the hassle of some reliability issues is nothing compared to driving the lifeless husks of cars they recommend instead.
(there are reliable sports cars, but it significantly limits the pool you can select from)
(there are reliable sports cars, but it significantly limits the pool you can select from)
That's fair, but it's funny because that's how I always felt about BMWs. My buddy loves them but I always felt like they were so... sterile. Unless you are at a track or love cutting off people in traffic it feels really hard to have any fun in one.
> My buddy loves them but I always felt like they were so... sterile.
I'd love to know which specific model you found sterile (wouldn't happen to be some 4 cylinder would it?)
People who drive boring cars love to parrot magazine reviewers... not realizing their definition of sterile is relative to a 911, not their Accord.
> Unless you are at a track or love cutting off people in traffic it feels really hard to have any fun in one.
I track my cars, but it's not hard to enjoy pleasant driving dynamics without resorting to being an irresponsible driver in a well-sorted car.
I'll defer to you on how fun cutting people off in traffic is though?
I'd love to know which specific model you found sterile (wouldn't happen to be some 4 cylinder would it?)
People who drive boring cars love to parrot magazine reviewers... not realizing their definition of sterile is relative to a 911, not their Accord.
> Unless you are at a track or love cutting off people in traffic it feels really hard to have any fun in one.
I track my cars, but it's not hard to enjoy pleasant driving dynamics without resorting to being an irresponsible driver in a well-sorted car.
I'll defer to you on how fun cutting people off in traffic is though?
Agreed - the last 5 that felt good to drive was the e39, and the rest probably peaked with the e90 or e8x. I felt the same way with the corvette - my c5 was the most fun to drive. C6 was an upgrade in comfort but significantly number, and the C7 was horrific. I took a C7Z for a spin and it felt slower and more boring than my c5 despite having 2x the HP.
[deleted]
Sterile compared to what? Is there another manufacturer of acceptably-tuned rear-drive sedan chassis out there at a semi-reasonable price point that I should know about?
(I'm talking about pre-2010 BMW here; I would totally agree with most new ones being sterile)
(I'm talking about pre-2010 BMW here; I would totally agree with most new ones being sterile)
I mean, I guess if you are limiting yourself to that exact style of car then yeah I guess.
(Although the Mazdaspeed6 was 90% of a BMW with 10% of the maintenance bill).
(Although the Mazdaspeed6 was 90% of a BMW with 10% of the maintenance bill).
I agree it may be 90% as fun to drive (which is subjective), but you're comparing FWD to RWD.
I'd much rather have a 80's-90's Nissan or Subaru, especially built, than a modern BMW, though. Much more soul in vintage cars imo.
Some vintage BMWs were pretty reliable, a lot of modern Nissans have awful reliability.
It's AWD, but the MS6 has about 100% the repair bills of any old BMW, this person just has no idea what they're talking about. Maybe they owned one when they were new and doesn't realize what long term reliability is like
As a current owner of a 90s Jaguar and an 05 Volvo, I've been looking at low-mileage E90 era BMWs for my next daily driver. Not too scared of moderately expensive maintenance, but would like it to be more reliable than the Volvo has been.
As a former E46 and current E83 owner, my advice is go for the earliest chassis code you can find while keeping mileage low. You need to find a unicorn at this point. (Unless you like turbos - then you have to go E90 or newer.)
BMW really ramped up the electronic complication starting with my E83, and that shit wears out right alongside all the typical flimsy BMW plastics and rubbers. Plus the delightful parasitic drains from tfa.
They also ramped up their maintenance-unfriendly designs around the E46 era. On an E39, a rear spring swap is easy. Try it on a newer one, and you will regret the attempt.
BMW really ramped up the electronic complication starting with my E83, and that shit wears out right alongside all the typical flimsy BMW plastics and rubbers. Plus the delightful parasitic drains from tfa.
They also ramped up their maintenance-unfriendly designs around the E46 era. On an E39, a rear spring swap is easy. Try it on a newer one, and you will regret the attempt.
Anecdote. I've had a BMW for the past 9 years now, and not once have I had to open the hood of the car or so much as replace my wiper fluid. I don't even know where the lever for any of that is. I pretty much take it in to a dealership when a light on the dashboard lights up, they drive me to work, pick me up after and my car is good to go.
I like Mazda and Honda (in that order). Japanese reliability, sporty handling and a turbo engine for a fraction of the german cars.
Agreed. I beat my C5 and C6 pretty hard, but aside from (some) of the GM/F cars you’re very limited in choice. Especially if you’re looking for a lightweight sedan.
I feel like I’ve lucked out in life with an ‘08 6MT N52 e90 and an ‘05 Corolla with a 1ZZFE.
Sounds quite anecdotal.
[deleted]
If you’re going to have to deal with it might as well get a tesla which is at least all in on the electronics and the company understands software.
The dealership model has really been awful for legacy manufacturers.
The dealership model has really been awful for legacy manufacturers.
Good luck in 5 more years when Tesla decide that your car is now unsupported.
I wonder if the Tesla mechanics are measurably better than the franchise dealers? I doubt it. I bet they have fancy testers, but when the tester is not showing 100% the right answer I doubt they are any use at all.
I wonder if the Tesla mechanics are measurably better than the franchise dealers? I doubt it. I bet they have fancy testers, but when the tester is not showing 100% the right answer I doubt they are any use at all.
I've had mine (Model 3) for about 5 years now, so far they updated the hardware for free and it's gotten way better software for free over the air. It's a much better car now then when I bought it (so at least so far, the opposite of what you suspect is true).
Service has also been way better for me than when I had cars serviced by franchised dealers, but that may be because I'm in SF. I had an issue and two days later a mobile Tesla service car came to my house and fixed it in my driveway for free.
Service has also been way better for me than when I had cars serviced by franchised dealers, but that may be because I'm in SF. I had an issue and two days later a mobile Tesla service car came to my house and fixed it in my driveway for free.
I said. Good luck in 5 more years when Tesla decide that your car is now unsupported.
>Service has also been way better for me than when I had cars serviced by franchised dealers
Which franchised electric car dealer are you comparing it to?
>Service has also been way better for me than when I had cars serviced by franchised dealers
Which franchised electric car dealer are you comparing it to?
Are they doing that with old model teslas?
>It seems like mechanics really don't like digging into the electrical part of the car.
If you've ever seen a car's complete wiring harness you'll know why. It's not only because there's three gazillions of wires - they're also heavily insulated with tape that makes it a nightmare to access those wires in the first place.
If you've ever seen a car's complete wiring harness you'll know why. It's not only because there's three gazillions of wires - they're also heavily insulated with tape that makes it a nightmare to access those wires in the first place.
As a practicing brochanic angry pixie spaghetti is the worst thing to deal with.
But I've heard so many stories of friends paying hundreds to auto sparkies only for the problem to remain.
But I've heard so many stories of friends paying hundreds to auto sparkies only for the problem to remain.
>there's three gazillions of wires
My old math teacher would deduct points for not listing the units.
My old math teacher would deduct points for not listing the units.
"Number of wires" is a unitless quantity.
My former English teacher would question why the age of your math teacher is relevant in this post.
Who said anything about the age of their old math teacher? You've got to learn old math and new math, presumably with different teachers.
Numbers of wires
> it's normal for the battery to die if you don't drive it for 3 days
I've heard this nonsense a couple times now. I was incredulous at first but everyone seems to say this. What are anyone's suggestions for a weekend-only car? (I bike to work so I don't need a car on weekdays.) Trickle charge the car battery on weekdays?
I've heard this nonsense a couple times now. I was incredulous at first but everyone seems to say this. What are anyone's suggestions for a weekend-only car? (I bike to work so I don't need a car on weekdays.) Trickle charge the car battery on weekdays?
Yeah, if a mechanic told me having the battery die in 3 days was normal, I'd stop going to that mechanic.
I did that for the exact same problem on the same model car earlier this year, but gave up after trying a few places that all said the same thing (including the dealer). Glad to see this post though… now I know I’m not the crazy one.
I would expect a _good_ car (no maintenance issues, new gas, newer battery) to go at least a couple months without being driven and not have any issues upon starting it up.
The average car in average condition should go around a month without being driven. Anything less than that either means a battery nearing the end of its life, not getting charged, or a parasitic draw somewhere.
The average car in average condition should go around a month without being driven. Anything less than that either means a battery nearing the end of its life, not getting charged, or a parasitic draw somewhere.
We have a 10 year old Honda Odyssey that we keep just for long road trips and it has gone 3-4 months without being driven with no issues. I usually do try to fire it up every 1-2 months just to make sure the battery gets a charge and to avoid long term storage issues around oil and belts and other parts that degrade.
I would also make sure to use a fuel stabilizer like Pri-G, gasoline in a gas tank, depending on your climate can degrade pretty fast.
Thanks, that's good advice. Luckily we've burned a tank or so every road trip (every few months) but I was wondering about that and whether it was good for gas to sit so long.
I park up my hilux for a year at a time, sometimes, and it Just Starts. Sure, it’ll take three attempts with a cold, damp engine and a sluggish battery, but it has yet to let me down.
The Nokia 3310 of motor vehicles.
Had one of those, too, and used to hide it in a pint of Guinness for a laugh. Dropped it in the sea a few times. Accidentally melted it slightly in a small housefire. It lived on after I moved on to a t68i as an SMS gateway for my home server for my one-man proto-Twitter.
All those cars at long term parking that wont start!
Really nonsense. It's true it might be more common due to all the additional modules and computers cars have now. If one goes crazy, it might drain your battery. But this is only in case of a failure. Edit: cold weather can accelerate that.
If it's 'weekend only', battery should be no problem. If sometimes you leave it a couple months unused, that might be a problem.
Depending on how ready you would like to be when you're going to use it, or the access you have to your car (is it far away or in your garage?) you could add a connector for a battery charger/maintainer (some of them have accessories for plugs you can leave permanently, see the NOCO GC002 for an example), and/or add a battery switch to easily disconnect the battery.
Warning: your radio might ask for a security code if it loses battery connectivity. Be sure you have it.
If it's 'weekend only', battery should be no problem. If sometimes you leave it a couple months unused, that might be a problem.
Depending on how ready you would like to be when you're going to use it, or the access you have to your car (is it far away or in your garage?) you could add a connector for a battery charger/maintainer (some of them have accessories for plugs you can leave permanently, see the NOCO GC002 for an example), and/or add a battery switch to easily disconnect the battery.
Warning: your radio might ask for a security code if it loses battery connectivity. Be sure you have it.
> Edit: cold weather can accelerate that.
My Honda HRV dies anytime it gets below -7C. Outside, inside, driven a bunch a day or two before -- once it's cold that battery taps out.
Probably a vampire drain but I suspect it's just a small battery. My old 2013 Mazda 3 starts in -25C without fail.
My Honda HRV dies anytime it gets below -7C. Outside, inside, driven a bunch a day or two before -- once it's cold that battery taps out.
Probably a vampire drain but I suspect it's just a small battery. My old 2013 Mazda 3 starts in -25C without fail.
Could be a weak starter (and or the combination of that, a weak battery and maybe even bad ground straps).
I don't have extensive experience with my current car bought last summer but 2 weeks in warmer weather definitely wasn't an issue.
I agree colder weather is always a bigger issue and at 1-2 months I'd definitely be thinking of a trickle charger if at all possible. An older car I didn't drive in the winter would definitely end up with a dead battery if I didn't keep it on a charger.
I agree colder weather is always a bigger issue and at 1-2 months I'd definitely be thinking of a trickle charger if at all possible. An older car I didn't drive in the winter would definitely end up with a dead battery if I didn't keep it on a charger.
AGM batteries are a lot more durable than regular lead-acid. They can cost a bit more but for me the longer life, more resistances to issues if you do run them all the way down and their sealed, maintenance free nature makes them the first thing I swap out. Optima used to be the only commonly available batteries but Costco, for example, has AGM equivalents for just about every battery out there - you may have to order it and wait a few weeks.
They were also the original batteries used in Miata's since they give off a lot less hydrogen when charging. Since the Miata battery is in the trunk, and all lead acid batteries give off hydrogen when charging, and hydrogen in an enclosed space can also be rightfully called a bomb, having less of that is a good thing!
They were also the original batteries used in Miata's since they give off a lot less hydrogen when charging. Since the Miata battery is in the trunk, and all lead acid batteries give off hydrogen when charging, and hydrogen in an enclosed space can also be rightfully called a bomb, having less of that is a good thing!
I must have had a bad run of big H8 AGMs in my Jag and Volvo. I think I've replaced about one a year on average. The Jag is very subject to parasitic drain and sometimes it just didn't come back from running itself out.
Did the Miata not come with a hole in the trunk floor for an exhaust hose for the battery? Both of my cars did...
Did the Miata not come with a hole in the trunk floor for an exhaust hose for the battery? Both of my cars did...
There's battery kill switches you can install onto the battery pole to effectively disconnect everything from the battery. This should work for older cars. For newer ones you may experience hiccups like reverse camera not working for a few hours until it has re-paired itself with the head unit.
Also the engine and transmission computers may go into "learn" mode if they are cold-starting having had no power for a while, and so you may have stuff like a wandering idle speed for a little while.
This really wouldn't work for any car made in the last 20 years. Most of them have anti-theft systems that require you to put in a PIN to use your stereo if it ever gets disconnected from the battery. I suppose you could type that in every single time, but there are other computers like your automatic transmission management that learn how you drive, etc, and might not like to get reset every day.
This is false. I have owned many different cars from the last 20 years and none of them did this when you disconnected the battery. A quick google search shows that it's Hondas that do this, not "any car made in the last 20 years".
No car I've owned in the last decade has actually drained in a few days. Any car that does has a problem.
I have this problem, but it really only becomes an issue when a few days becomes a few weeks. Do that a few times and the battery will lose capacity too.
Weeks, sure. 2 weeks is probably on the lower end of acceptable though. My car is often left for 2 weeks and is completely fine, but most of the time it's weekly.
You can drive a car from the 90s before they started shipping alarms and keyfobs in every vehicle. My 1995 Miata draws just enough power to maintain the clock in the radio, and it starts just fine after sitting for 6 months (it's not a winter car).
My 2000 Ford Explorer has all kinds of electronics and modules from the factory. And even my crap I added in... I leave my Qi charger, ham radio, Bluetooth FM transmitter all running and plugged in, and I can come out a week later and the battery is still not dead. And when I'm camping I run a 12v van all night long. Truck starts right up every time. I don't get what would be draining more power than that in a more modern car. You'd think they'd be more efficient at not wasting juice.
A modern car is supposed to have single digit or less milliamp drain, according to a random car mechanic I know. I'm a mechanic but not automotive.
That's after being off for 30 minutes though. Some things stay on for a while.
That's after being off for 30 minutes though. Some things stay on for a while.
You should see if there are carshare options around you.
Even if you’re spending $50/weekend (which is a fair amount of driving — Communauto is as low as $3/hr), that’s still quite a bit cheaper than owning a depreciating asset with lifetime maintenance costs (not to even mention insurance and fuel).
Even if you’re spending $50/weekend (which is a fair amount of driving — Communauto is as low as $3/hr), that’s still quite a bit cheaper than owning a depreciating asset with lifetime maintenance costs (not to even mention insurance and fuel).
Oh do I wish there were carshare options near me. Just moved from Philadelphia where ZipCar seems to be the only remaining contender, and you're lucky if there's one within a half hour's walk in the part of the city I was in. It's even worse in the town I moved to. There used to be a few at the nearby train station, but those seem to have disappeared. (This reminds me, I should go cancel my membership.)
I'm jealous of the carshare options that seem to be available elsewhere. If it were as easy here as in this NJB video, it'd be a no-brainer: https://youtu.be/OObwqreAJ48
I'm jealous of the carshare options that seem to be available elsewhere. If it were as easy here as in this NJB video, it'd be a no-brainer: https://youtu.be/OObwqreAJ48
"You will own nothing and you will be happy"
This must be the new astroturfing attack against concepts like public transportation. I've seen this phrase pop up too frequently at this point for it to be organic.
Maybe a lot of people just read the news? It was said by the leader of the World Economic Forum.
> In 2016, Auken published an essay originally titled "Welcome to 2030. I own nothing, have no privacy, and life has never been better",[2] later retitled "Here's how life could change in my city by the year 2030". It described life in an unnamed city in which the narrator does not own a car, a house, any appliances, and any clothes, and instead relied on shared services for all of their daily needs.
From your link. I'll let others decide whether or not that is "lying".
From your link. I'll let others decide whether or not that is "lying".
The simple may see it as astroturfing, others see it as an observation by those paying attention. I'm now living in a house I own without a mortgage because 20 years ago I bought a house and didn't rent. Utilities and property taxes are my only expenses. Yes, there is maintenance but if you don't think that's also factored into rent you are beyond delusional. Landlords aren't going to lose money out of the goodness of their hearts. I haven't had a car payment in over a decade because I take care of my stuff. The car goes in the garage; I don't fill my garage with a bunch of useless stuff I will likely never touch again (or pay someone else to store it!).
Common sense stuff like the above, sadly, isn't common sense any more - so hence pithy phrases like own nothing and like it. A modern day emperor has no clothes, if you will.
Also, car-sharing is not public transportation? Weird comment.
My wife drives about once a week, probably less on average. She has a 2013 Honda CR-V, only 15,000 miles on it. We live in Minnesota, so have cold temps, but the car in a garage. The car always starts. We've replaced the battery once just due to longevity.
Every 3 days? No way.
Every 3 days? No way.
15k miles on a 2013 CR-V? Enjoy the last car you'll ever own! I assume you know this, but some of the maintenance items for that car are 8 years I think; worth checking the manual to find out!
Haha, yep. She refers to it as the literal "just driven to the grocery store by a little old lady" car (because it's basically that and Home Depot). She even got the lowest trim level (on purpose) so it doesn't have anything fancy (no BT radio, no keyless start, no big display, etc.).
Good point on the maintenance. I do get the oil changed, again more by time than distance, and I'll look up the other stuff now that you've mentioned it, thanks.
Good point on the maintenance. I do get the oil changed, again more by time than distance, and I'll look up the other stuff now that you've mentioned it, thanks.
Tires should be first on the list!
I try to keep my cars on trickle chargers (Noco Genius 5 in my case) when not driven regularly, because regularly killing $300 AGM batteries gets expensive.
That said, I'd expect most cars should be able to manage, say, 2-3 months. It's when I exceed 4 months with some regularity that battery life starts getting sketchy.
If you're driving the car every weekend, I'd expect that should be plenty. Note that fancier cars with more electronic features don't do well when only driven short distances. If you only drive 2-3 miles at a time, you might be discharging the battery faster than you're charging it.
That said, I'd expect most cars should be able to manage, say, 2-3 months. It's when I exceed 4 months with some regularity that battery life starts getting sketchy.
If you're driving the car every weekend, I'd expect that should be plenty. Note that fancier cars with more electronic features don't do well when only driven short distances. If you only drive 2-3 miles at a time, you might be discharging the battery faster than you're charging it.
That's because it is nonsense.
I have a week-end only car (2002 Mini) and I've had no issue letting sit for a week or two. Including opening/closing it without starting the engine to retrieve stuff in that timeframe.
And a week or two is on the low-end of how much you can let it sit. My SO car (1st gen citroen C3) often don't run for one or two month at a time and there is absolutely no issue with the battery.
On the other hand, if you have parasitic drain and access to an electric socket, there are battery chargers that can keep the car topped up. Or without an electric socket, just unplug the battery when the car isn't used (though that may disable some things, for example in my car the hatch is inoperable without power).
I have a week-end only car (2002 Mini) and I've had no issue letting sit for a week or two. Including opening/closing it without starting the engine to retrieve stuff in that timeframe.
And a week or two is on the low-end of how much you can let it sit. My SO car (1st gen citroen C3) often don't run for one or two month at a time and there is absolutely no issue with the battery.
On the other hand, if you have parasitic drain and access to an electric socket, there are battery chargers that can keep the car topped up. Or without an electric socket, just unplug the battery when the car isn't used (though that may disable some things, for example in my car the hatch is inoperable without power).
Table for reference: https://homebatterybank.com/how-fast-will-a-car-battery-drai...
That said, at between like 0F and -10F, I'd be intentional about starting that car every couple days. Below -10F to -20F, I'd start it each day. Below -20, I'd consider bringing the battery inside for the night - even if you have a battery blanket. Once a lead-acid car battery has frozen, it will die very quickly from then on - I'd believe within a few days or less even in normal weather. AGM batteries are awesome alternatives for the cold weather lifestyle, in terms of their resistance to freezing damage.
That said, at between like 0F and -10F, I'd be intentional about starting that car every couple days. Below -10F to -20F, I'd start it each day. Below -20, I'd consider bringing the battery inside for the night - even if you have a battery blanket. Once a lead-acid car battery has frozen, it will die very quickly from then on - I'd believe within a few days or less even in normal weather. AGM batteries are awesome alternatives for the cold weather lifestyle, in terms of their resistance to freezing damage.
I didn't drive my 2019 Mercedes for months during the pandemic and the battery was fine. It did give me a warning when I restarted driving it (I guess the battery was starting to get low-ish), but it immediately fixed itself.
It's nonsense! If a car is dying after not being driven for several months, ok fair enough. If after several days a particular year make model dies it deserves a recall!
Yes, they make battery tenders that are specifically for this. They'll trickle charge when needed, but also not charge at all when the battery is at the right voltage.
Or disconnect the battery (you’ll have to reset the clock, etc., which is annoying).
Not great advice.
Most new-ish cars also store the dinamic engine calibration data in ECU RAM so if you disconnect the battery you can find your engine running harsher next time. So are the values of the headlights auto leveling system and other stuff.
You're also risking to reset the radio/media unit security code (on cars that aren't too new but also not super old), which if you got the car second hand and the former owner didn't save the piece of paper it came with and give it to you, tough luck unlocking it.
Most new-ish cars also store the dinamic engine calibration data in ECU RAM so if you disconnect the battery you can find your engine running harsher next time. So are the values of the headlights auto leveling system and other stuff.
You're also risking to reset the radio/media unit security code (on cars that aren't too new but also not super old), which if you got the car second hand and the former owner didn't save the piece of paper it came with and give it to you, tough luck unlocking it.
There are systems that can be attached to save the parameters from the car before you disconnect the battery or even to provide electricity to the car while the battery is being checked in another room. Not common to find and most people don't need them, but they exist.
Not ideal to cut power to the entire car, but that happens anyway on every battery swap, no?
If you want to get fancy you can isolate the exact fuse and switch just that:
https://www.ebay.com/itm/175668177479
Thinking more, given how common parasitic drains are, carmakers should have all non-essential fuses in a separate subpanel section that can be easily switched off/diagnosed.
If you want to get fancy you can isolate the exact fuse and switch just that:
https://www.ebay.com/itm/175668177479
Thinking more, given how common parasitic drains are, carmakers should have all non-essential fuses in a separate subpanel section that can be easily switched off/diagnosed.
No. Good automotive mechanics plug a little 12v power supply into the OBD port before replacing the battery, to keep the ECU/radio RAM powered.
> It seems like mechanics really don't like digging into the electrical part of the car.
That is certainly correct. Troubleshooting electrical issues takes a different set of skills than most mechanics are trained to deal with. Most mechanics are so busy that throwing parts at a problem is the best way to deal with issues where the cause isn't readily apparent. It's not worth their time to really dig into a difficult issue because if they spend 8 hours of shop time and try to bill that to a customer, the customer is going to just balk anyway. Better to throw a part at it, bill 1.5 hrs, send it out the door, and let the next guy deal with it. And then move on to some more profitable muffler and brake repair jobs.
This is thankfully not ALL mechanics, but it certainly is a large percentage of them, IMO. (Yep, even dealerships.)
That is certainly correct. Troubleshooting electrical issues takes a different set of skills than most mechanics are trained to deal with. Most mechanics are so busy that throwing parts at a problem is the best way to deal with issues where the cause isn't readily apparent. It's not worth their time to really dig into a difficult issue because if they spend 8 hours of shop time and try to bill that to a customer, the customer is going to just balk anyway. Better to throw a part at it, bill 1.5 hrs, send it out the door, and let the next guy deal with it. And then move on to some more profitable muffler and brake repair jobs.
This is thankfully not ALL mechanics, but it certainly is a large percentage of them, IMO. (Yep, even dealerships.)
Imagine as a software developer you tracked your time working tickets, your pay was hourly, and depending on the ticket type you were prescribed how long that ticket should take and paid those set hours whether you went over/under the set hours. This sounds completely insane but this is how car mechanics work (as I understand a lot of shops do this). Replacing a battery might be 1/4 hour labor, replacing brakes on car model XYZ is 1.25 hours, etc. This is why mechanics won't really want to spend time on issues like this. It could be a wild goose chase tracking down every electrical sub-system in the car only to find something chewed thru a wire somewhere under a panel. The fix might be $15 in parts and 20 hours of actual labor but their system might quote replacing a wire as 1 hour labor.
That's kind of how dealer mechanics work but not any other mechanic... They work for 10 hours, you get billed for 10 hours.
> That's kind of how dealer mechanics work
Refinement: That's kind of how dealer mechanics work when they know that book time they are billing is more than the time they actually need for the task. For all the other situations, there is book time like "diagnosis, complexity high, diagnostic equipment involved" billed per 6min unit.
Refinement: That's kind of how dealer mechanics work when they know that book time they are billing is more than the time they actually need for the task. For all the other situations, there is book time like "diagnosis, complexity high, diagnostic equipment involved" billed per 6min unit.
Many shops work by book time, not just dealers, although obviously YMMV based on the shop and the work.
It’s more common for routine maintenance to be charged by book time since it’s a standard procedure, less common for more complicated issues
It’s more common for routine maintenance to be charged by book time since it’s a standard procedure, less common for more complicated issues
It's fairly straightforward if the car is unmodified, as everything should be fused. Multi-meter between positive terminal and positive lead and pulling each fuse to see when the drop goes away will isolate the circuit. Then you've narrowed it down pretty far and can go from there.
The horrible thing is if the car is modified, and you discover an un-fused circuit.
The horrible thing is if the car is modified, and you discover an un-fused circuit.
> Ammeter across the battery terminals
I know what you're trying to say... but this reads like very dangerous advice and you may want to revise.
Ammeter between a battery's terminal and the car's electrical system.
Also note that you'll probably create sparking when doing this, and if the battery has recently been charging this can be dangerous (hydrogen outgassing).
I know what you're trying to say... but this reads like very dangerous advice and you may want to revise.
Ammeter between a battery's terminal and the car's electrical system.
Also note that you'll probably create sparking when doing this, and if the battery has recently been charging this can be dangerous (hydrogen outgassing).
I think the mistake may have actually been writing ammeter instead of voltmeter. Ammeter is not safe as general advice as a typical one won’t be anywhere near large enough capacity for working with a car battery and should come with a lot of disclaimers about how to hook it up. Measuring voltage drop would work but only for fairly high loads.
> Measuring voltage drop would work but only for fairly high loads.
Yah, that doesn't really make sense for small parasitic loads.
> Ammeter is not safe as general advice as a typical one won’t be anywhere near large enough capacity for working with a car battery
It should be fine with the car not "on", but the general level of danger of doing anything near a car battery requires caution.
Yah, that doesn't really make sense for small parasitic loads.
> Ammeter is not safe as general advice as a typical one won’t be anywhere near large enough capacity for working with a car battery
It should be fine with the car not "on", but the general level of danger of doing anything near a car battery requires caution.
> Yah, that doesn't really make sense for small parasitic loads.
If your multimeter has a sub-mV range -- which a decent meter should -- you can measure a voltage drop across the battery ground lead. I've successfully done that to diagnose a battery draw in my car.
If your multimeter has a sub-mV range -- which a decent meter should -- you can measure a voltage drop across the battery ground lead. I've successfully done that to diagnose a battery draw in my car.
Exactly, you are measuring a change, so its the precision of the meter not the absolute V. Maybe easier to measure on a nearly dead battery?
I'm not talking about measuring the terminal voltage of the battery. What I mean is using the ground lead as a current shunt by connecting one meter lead to the negative battery terminal and the other to where the ground lead connects to the vehicle chassis. The voltage measured across that shunt is proportional to the amount of current being drawn from the battery.
It's the same principle as measuring the voltage across a fuse, except it ends up measuring the draw for the whole car, not just one circuit.
It's the same principle as measuring the voltage across a fuse, except it ends up measuring the draw for the whole car, not just one circuit.
> It should be fine with the car not "on"
No. Not if the meter is in "Ammeter" mode (or is purely an ammeter only). An ammeter presents a very low resistance to the circuit you are attaching it to, low enough that for almost all circuits, it is effectively a "short".
If one connects an ammeter across a low resistance voltage source (i.e., across the car battery) the ammeter will appear as a short circuit to the battery, and one or more bad things will happen. The 'least bad' will be blowing a rather expensive fuse in the ammeter that protects it from this kind of accidental use. Several of the "most bad" will involve hot molten metal and/or extreme heat.
No. Not if the meter is in "Ammeter" mode (or is purely an ammeter only). An ammeter presents a very low resistance to the circuit you are attaching it to, low enough that for almost all circuits, it is effectively a "short".
If one connects an ammeter across a low resistance voltage source (i.e., across the car battery) the ammeter will appear as a short circuit to the battery, and one or more bad things will happen. The 'least bad' will be blowing a rather expensive fuse in the ammeter that protects it from this kind of accidental use. Several of the "most bad" will involve hot molten metal and/or extreme heat.
> If one connects an ammeter across a low resistance voltage source (i.e., across the car battery) the ammeter will appear as a short circuit to the battery
Yes. My first comment on this thread says not to do that, and suggesting an alternative is "Ammeter between a battery's terminal and the car's electrical system." instead. https://news.ycombinator.com/item?id=35514652
I was replying to "anywhere near large enough capacity" in the next post. The typical 10A range is massive overkill for typical parasitic loads in a car, and even things like the fuel pump deciding to kick on and run in most cars.
Yes. My first comment on this thread says not to do that, and suggesting an alternative is "Ammeter between a battery's terminal and the car's electrical system." instead. https://news.ycombinator.com/item?id=35514652
I was replying to "anywhere near large enough capacity" in the next post. The typical 10A range is massive overkill for typical parasitic loads in a car, and even things like the fuel pump deciding to kick on and run in most cars.
Using an ammeter as you describe would work fine, but the topics this thread including mine should come with a footnote[1] at least. Especially when this thread shows a simple mistake can cause a lot of confusion about what to do. My thought process with my comment about capacity was that muscle memory makes it likely you'll eventually start the car if you're touching the ignition switch/button during troubleshooting, although on further thought and reading the other comments I'd do the following: pull the starter fuse, then use a 10A ammeter function of a common multimeter, connected inline between the negative harness and the negative terminal and not on the positive side.[1]
[1]This is just what I would do. Only do this based on a reputable guide if you don't have experience working around car batteries.
[1]This is just what I would do. Only do this based on a reputable guide if you don't have experience working around car batteries.
heh true, edited post to maybe save someone some sparks.
I’ve had unknown draws before and many times they’re not constant draws. A constant draw is easy and quick to find. A draw that only happens when some module or other wakes up is a lot harder to find.
I recently watched a YouTube video from someone who'd tracked a nasty intermittent parasitic draw [0]. The problem only happened after turning the ignition on & back off (so the standard test of disconnecting the battery & reconnecting via the ammeter wouldn't show it), and the draw cycled between 3.6A and 0.3A.
Also, after turning the ignition on & back off there were a lot of (normal) transient draws (from things like the dome light that don't turn off immediately). Even with the problem circuit disconnected, it drew around 6A (!) immediately after the ignition was switched off, dropped to 0.4A after about a minute, and sat at that level for another 9 minutes before dropping again to 0.06A. That means if he hadn't waited ~10 minutes per test, he'd have been chasing draws that were actually normal.
Combine an intermittent fault with intermittent normal behavior, and you've got a troubleshooting nightmare.
[0] https://www.youtube.com/watch?v=rVScppKsfHs
Also, after turning the ignition on & back off there were a lot of (normal) transient draws (from things like the dome light that don't turn off immediately). Even with the problem circuit disconnected, it drew around 6A (!) immediately after the ignition was switched off, dropped to 0.4A after about a minute, and sat at that level for another 9 minutes before dropping again to 0.06A. That means if he hadn't waited ~10 minutes per test, he'd have been chasing draws that were actually normal.
Combine an intermittent fault with intermittent normal behavior, and you've got a troubleshooting nightmare.
[0] https://www.youtube.com/watch?v=rVScppKsfHs
As an example, my 2017 Corolla runs the fuel pump for a while 5 hours after shutdown to test fuel system pressurization. I didn’t even know until I recently started parking it inside and I finally heard it running.
I learned about this with my 2013 Scion iQ. I was living with my brother who didn't allow weed smoking in or near the house so I would go hotbox my car.
Weirded me out the first time I'm sitting there in silence smoking a bowl and suddenly fuel pump noises. Which were easier than normal to hear because I took the back seats (the only sound deadening in the back) out of that car so I'd have room for a full size spare tire instead.
With my current car (2020 Kia Sportage) I've noticed the head unit is waking up before I even start the car. As soon as you unlock the car I can see my flash drive light up with activity as the head unit gets ready to pickup music from where it left off.
Weirded me out the first time I'm sitting there in silence smoking a bowl and suddenly fuel pump noises. Which were easier than normal to hear because I took the back seats (the only sound deadening in the back) out of that car so I'd have room for a full size spare tire instead.
With my current car (2020 Kia Sportage) I've noticed the head unit is waking up before I even start the car. As soon as you unlock the car I can see my flash drive light up with activity as the head unit gets ready to pickup music from where it left off.
Yeah that's pretty normal across different manufacturers, and you only hear it if you park in a quiet garage and happen to be in the garage at the moment it turns on to do it's thing. It's testing the seal of the fuel cap to make sure you aren't just venting gasoline fumes.
And usually it only runs in a certain temperature range. Winter climate cars may get several months between a test.
I had to sleep in a work truck once and every hour or so it would modulate the shutters in the air vents to refresh the air in the cab or something. The click and buzz whir kept waking me up, it was quite annoying.
Yes. I had a Dodge Charger where the parasitic draw wouldn't really become problematic until 3 days after you re-attached the battery. At which point it would be so bad it would discharge from full to empty overnight. It could even out-draw a trickle charger.
I took it to several mechanics who couldn't find anything - because they'd unplug the battery to add a meter into the circuit. They weren't willing to wait 3 days afterwards to come back to it.
I ended up disconnecting the battery overnight. Worked fine then. Traded it in; I feel a bit bad for the next buyer.
I took it to several mechanics who couldn't find anything - because they'd unplug the battery to add a meter into the circuit. They weren't willing to wait 3 days afterwards to come back to it.
I ended up disconnecting the battery overnight. Worked fine then. Traded it in; I feel a bit bad for the next buyer.
> Ammeter across the battery terminals and pulling each fuse to see when the drop goes away
How does this compare with the way presented in the article based on measuring resistive voltage drop across each fuse in turn?
How does this compare with the way presented in the article based on measuring resistive voltage drop across each fuse in turn?
Ye olde ammeters were secretly voltmeters with a low-value but high-precision shunt resistor in series with the circuit to be measured.
Current passing through the resistor causes a tiny voltage drop, which is measured by the meter. As the voltage is proportional to the current, the scale painted on the cardboard behind the needle did the actual conversion.
In the author's setup the fuse takes the shunt's place; its resistance is apparently a known value that can be gathered from a datasheet.
Current passing through the resistor causes a tiny voltage drop, which is measured by the meter. As the voltage is proportional to the current, the scale painted on the cardboard behind the needle did the actual conversion.
In the author's setup the fuse takes the shunt's place; its resistance is apparently a known value that can be gathered from a datasheet.
> Ye olde ammeters were secretly voltmeters with a low-value but high-precision shunt resistor in series with the circuit to be measured.
"ye olde"? That's how every typical one works, till you go to clamp meter
> its resistance is apparently a known value that can be gathered from a datasheet.
that's... optimistic
"ye olde"? That's how every typical one works, till you go to clamp meter
> its resistance is apparently a known value that can be gathered from a datasheet.
that's... optimistic
> that's... optimistic
The absolute current value probably doesn't matter - in fact I very much doubt a hobbyist-level multimeter is even capable of accurately measuring the (fractions of?) millivolts across a fuse.
It's more important as a boolean signal - "is there current being drawn on this fuse?", and then usually even those fractions of millivolts will generally be enough to make your el-cheapo multimeter register 1mV and tell you something is drawing current, where as a fuse with no voltage drop across it at all will reliably show 0mV (just like it would if the probes were shorted) on even a cheap meter.
The absolute current value probably doesn't matter - in fact I very much doubt a hobbyist-level multimeter is even capable of accurately measuring the (fractions of?) millivolts across a fuse.
It's more important as a boolean signal - "is there current being drawn on this fuse?", and then usually even those fractions of millivolts will generally be enough to make your el-cheapo multimeter register 1mV and tell you something is drawing current, where as a fuse with no voltage drop across it at all will reliably show 0mV (just like it would if the probes were shorted) on even a cheap meter.
Or you could measure the resistance of the fuse directly using a multimeter...
Not usually. It's too low for regular multimeters. You'll most likely need a 4 wire meter to measure that low of ohms.
[deleted]
Same idea really, just that you have to bother disconnecting something and try one by one vs just measuring it fuse by fuse.
Other method is getting DC clamp meter with low range (say 2A). Then just clamp in on wires. Bit fiddly as they work on magnetic field so they need to be reset before measure (And can work as compass in a pinch...)
Other method is getting DC clamp meter with low range (say 2A). Then just clamp in on wires. Bit fiddly as they work on magnetic field so they need to be reset before measure (And can work as compass in a pinch...)
My last car, a 2007 Acura TSX, had the same problem--it wouldn't start after 4 or 5 days (maybe 2 or 3 during the winter). This model was from the first wave of touchscreens and bluetooth. Mechanics shrugged, pointed to the tiny, underpowered battery, and told me to drive it more.
Thankfully there are a lot of car enthusiast forums out there that have been plugging away on vBulletin for years. Someone on an Acura forum had figured out that the bluetooth module was always on and looking for a connection. I tried disconnecting it, and the problem was fixed.
Thankfully there are a lot of car enthusiast forums out there that have been plugging away on vBulletin for years. Someone on an Acura forum had figured out that the bluetooth module was always on and looking for a connection. I tried disconnecting it, and the problem was fixed.
God bless online car forums. Usually just awesome, well-intentioned, and helpful people that participate, with decades of knowledge indexed. There was a year way back there when the usefulness of the forums surpassed the Chilton's manual for me entirely - probably something to do with the addition of YouTube.
Same problem and same fix for my 2009 Acura MDX.
Same problem with our 2007 Acura TL. And we fixed it the same way.
> It seems like mechanics really don't like digging into the electrical part of the car... but these days that encompasses more and more of what can go wrong.
Having worked as a mechanic in my youth, and worked as a software engineer in SV, the kinds of troubleshooting skills and detail-oriented attention span involved in diagnosing these issues are far more common in the latter than the former industries.
My impression is it's rare for someone with such abilities to stay a mechanic, they can earn far more money in tech, with less exposure to hazards.
On the subject of mechanics failing to diagnose electrical issues, I have my own story too:
Decades ago, back in IL, a friend inherited a low-mileage minimalist Ford Escort hatchback, manual trans, crank windows, it was a great little econobox to inherit, on paper. He kept having the battery die on him. Not being a mechanic or even a hobbyist gearhead himself, he kept bringing it to shops. They replaced the alternator, the wiring harness, the battery, the starter, they just kept throwing parts at the car. This is what most "mechanics" do nowadays; a poorly informed process of elimination via new parts, on your dime.
I hadn't been in contact with this friend for years when I heard about this "cursed" low-mileage car sitting in his garage, full of new parts with invoices totaling well over $1k. He was car-less at the time because of this situation. I offered to fix it for him, but he didn't have any confidence left in the vehicle or my ability to fix it, he was understandably fatigued by the whole thing. So I offered something like $250 and took the car off his hands.
15 minutes with a voltmeter revealed a huge voltage drop across the negative battery terminal and the chassis. Followed the negative strap to where it attached to the chassis and the area was corroded (recall it's an IL car). Removed the rusty bolt, wire-brushed the unibody steel behind it, the bolt and cable lug, slapped dielectric grease on everything and reassembled.
The car charged the battery fine and ran like a champ. I ended up selling it back to him a year or two later for basically what I paid plus a few hundred for my trouble/towing etc. He wouldn't even take it back until I had driven it for years to prove it was fixed. It was that brutal an experience for him, dealing with "expert" "mechanics" bleeding him dry.
Having worked as a mechanic in my youth, and worked as a software engineer in SV, the kinds of troubleshooting skills and detail-oriented attention span involved in diagnosing these issues are far more common in the latter than the former industries.
My impression is it's rare for someone with such abilities to stay a mechanic, they can earn far more money in tech, with less exposure to hazards.
On the subject of mechanics failing to diagnose electrical issues, I have my own story too:
Decades ago, back in IL, a friend inherited a low-mileage minimalist Ford Escort hatchback, manual trans, crank windows, it was a great little econobox to inherit, on paper. He kept having the battery die on him. Not being a mechanic or even a hobbyist gearhead himself, he kept bringing it to shops. They replaced the alternator, the wiring harness, the battery, the starter, they just kept throwing parts at the car. This is what most "mechanics" do nowadays; a poorly informed process of elimination via new parts, on your dime.
I hadn't been in contact with this friend for years when I heard about this "cursed" low-mileage car sitting in his garage, full of new parts with invoices totaling well over $1k. He was car-less at the time because of this situation. I offered to fix it for him, but he didn't have any confidence left in the vehicle or my ability to fix it, he was understandably fatigued by the whole thing. So I offered something like $250 and took the car off his hands.
15 minutes with a voltmeter revealed a huge voltage drop across the negative battery terminal and the chassis. Followed the negative strap to where it attached to the chassis and the area was corroded (recall it's an IL car). Removed the rusty bolt, wire-brushed the unibody steel behind it, the bolt and cable lug, slapped dielectric grease on everything and reassembled.
The car charged the battery fine and ran like a champ. I ended up selling it back to him a year or two later for basically what I paid plus a few hundred for my trouble/towing etc. He wouldn't even take it back until I had driven it for years to prove it was fixed. It was that brutal an experience for him, dealing with "expert" "mechanics" bleeding him dry.
I saw this on the Gears and Gasoline Youtube channel: https://youtu.be/XgOowUWbCdk?t=628 -- looks like a lot of work to trace a parasitic drain.
If you like watching amateur YouTubers rip out their hair chasing electrical problems, I recommend checking out Tavarish and Samcrac. It turns out cheap flooded auction cars have tons of those
Pine Hollow Auto Diagnostics
South Main Auto
Watch Wes Work
musty1
South Main Auto
Watch Wes Work
musty1
Jimmy making it work!
https://www.youtube.com/@JimmyMakingitwork
lol @ Tavarish and Samcrac mentioned here, they are TV entertainers who are more concerned about drama. If you want to learn how to repair stuff, these guys are where its at ^
https://www.youtube.com/@JimmyMakingitwork
lol @ Tavarish and Samcrac mentioned here, they are TV entertainers who are more concerned about drama. If you want to learn how to repair stuff, these guys are where its at ^
Do you mean mustie1? I used to watch that channel all the time, super entertaining. Shows you all the cool technical bits of engine repair and maintenance without boring you to death.
I don't often have to write the channel name out, I think you may be right. I enjoy his genuine and unstressed demeanor towards the camera. Just a guy wrenching on some hardware and talking about it.
+1 for SMA. The man clearly takes you through the troubleshooting process and his train of though.
I think a cheap thermal camera would be very helpful in these situations with a relatively fast drain. A car battery is ~1 kWh so anything that drains it in a few days is dissipating on the order of 10 watts. In my experience that's very easy to see in a thermal camera. Just leave the car in a nice thermally-stable place for a day and then go hunting.
Wow. My German car handles being parked for 3 months just fine.
So does my American car.
And all three of my Japanese cars too. Definitely not normal behavior.
Don't ever go back to that second mechanic.
Eric O from the South Main Auto youtube channel has some great videos on tracking down parasitic drains on modern-ish cars. From his videos I learned that often cars won't fully sleep for up to 45 minutes depending on the model and manufacturer, as well as checking for the voltage drop across fuses to figure out which circuit is draining the battery. With this I was able to track down a parasitic drain in my 2000 Beetle (failing door lock). I'm sure he mentioned other tips as well but those are the ones that stick out to me.
Mechanics are like doctors: find a good one and be grateful.
> It seems like mechanics really don't like digging into the electrical part of the car
Probably worth taking it to an auto electrician, rather than a mechanic.
Probably worth taking it to an auto electrician, rather than a mechanic.
Let me translate the second mechanic's advice into our language: "Have you tried turning it on and off again?"
How much of your clients' time (and therefore money) would you spend chasing down a bug in software with an unknown root cause, which never appears as long as operations schedules a restart every couple of days? Software engineers are all too happy to dive into those rabbit holes, but that's because we don't usually have to look working stiffs in the eye and hand them the bill for our services.
That's likely not an incompetent or lazy mechanic. It's an honest one who doesn't believe they can solve your problem at a price you'd accept.
The first mechanic, on the other hand, I'm a lot more suspicious of. Did they bother testing the battery before replacing it?
How much of your clients' time (and therefore money) would you spend chasing down a bug in software with an unknown root cause, which never appears as long as operations schedules a restart every couple of days? Software engineers are all too happy to dive into those rabbit holes, but that's because we don't usually have to look working stiffs in the eye and hand them the bill for our services.
That's likely not an incompetent or lazy mechanic. It's an honest one who doesn't believe they can solve your problem at a price you'd accept.
The first mechanic, on the other hand, I'm a lot more suspicious of. Did they bother testing the battery before replacing it?
For me it lasted close to 4 years. I had installed a tracker that uses a SIM that you have to keep topped up to receive the messages. No issues where I live so over time I stopped and didn't even think about it. Fast forward, I went through 3 batteries, couple mechanics, bought a portable jumper and a physical battery disconnector and even got a voltage meter and was mucking around with the fuse box etc and just grew to live with it until one day I was cleaning the car, saw the thing and just disconnected it and then a few weeks later I noticed that leaving the car on weekends the battery was fine the Monday (usually had to jumpstart as it would drain). Turns out the tracker was trying to send messages almost every minute THAT it couldn't send messages! So it had been doing that for years and was the tiny leech on the battery, not large enough to be detected but enough to slowly drain a brand new battery over the course of a few days.
> mechanics really don't like digging into the electrical
Mechanics don't like fishing expeditions for nonessential things. $100/h for 2+ hours diagnostic, followed by tedious parts to replace and pair up.
A new battery every couple of years and a trickle charger probably seems like better value to them.
Mechanics don't like fishing expeditions for nonessential things. $100/h for 2+ hours diagnostic, followed by tedious parts to replace and pair up.
A new battery every couple of years and a trickle charger probably seems like better value to them.
In the military, the folks tasked with Mechanical maintenance of vehicles are an entirely different branch with different training, infra, etc than those tasked with Electrical maintenance of vehicles. Perhaps we need a similar dichotomy on the civilian side.
Heh, I also have an NC2 Miata, and I don't drive it for 3-6 month periods, and it still starts on the first/second engine spin.
If the battery is over 3 years old, I would replace it and start anew simply because of the life/abuse it'd had so far.
And then I'd start at the obvious ones - radio, aftermarket radio, alarm, etc. You can literally put a multimeter along the fusebox to see what is pulling voltage after - but most likely it will be something along 12V connected switch.
Wiring isn't problematic, but if you have a hitch installed it may be wired to always be on.
If the battery is over 3 years old, I would replace it and start anew simply because of the life/abuse it'd had so far.
And then I'd start at the obvious ones - radio, aftermarket radio, alarm, etc. You can literally put a multimeter along the fusebox to see what is pulling voltage after - but most likely it will be something along 12V connected switch.
Wiring isn't problematic, but if you have a hitch installed it may be wired to always be on.
I've been to multiple mechanics, talked to roadside assistance people, posted in multiple forums, and talked to family about this problem with an old car of mine... and they all swore up and down that you should start a car if it sits longer than a weekend, maybe a week tops. They made me feel insane about it, it's one of those widely accepted things that's just not true most of the time.
There are other reasons to do that unrelated to the electrical system of the car. You're keeping the engine and any other moving parts lubricated. You're burning fuel, so that you don't wind up with as much degraded oil.
Sure but that's never mentioned... this is always talked about as common sense "this is how you make sure your battery doesn't die." It seems as though problems with parasitic drain are so common that this has become standard advice?
I'm sure if the mechanic was paid for it hourly they'd gladly tear your car apart trying to find the drain, but I think most people can't stomach that.
If anyone takes a car to a mechanic and asks for the estimate and the estimate is (100$ an hour until I find the leak and it may take a whole day or two), then most people are gonna gag.
You need to find an expert in your car.
If anyone takes a car to a mechanic and asks for the estimate and the estimate is (100$ an hour until I find the leak and it may take a whole day or two), then most people are gonna gag.
You need to find an expert in your car.
I once had a parasitic drain on my BMW 3-series (e46). The dealership diagnosed the problem appropriately. It turned out to be the GROM Audio module I installed to replace the CD changer. It would drain the battery in about a week. So back to burning CDs and the issue was resolved.
Our 1990 Miata has a parasitic drain too. We installed a battery disconnect switch that takes about 5 seconds to connect or disconnect whenever we use the car. It's a little bit of an extra hassle, but it was an easy solution.
> The second told me it's normal for the battery to die if you don't drive it for 3 days
No, this is not normal. When the cars are manufactured, they often sit for more than 3 days just to get on a train for delivery. During transport they often sit for more than 3 days.
No, this is not normal. When the cars are manufactured, they often sit for more than 3 days just to get on a train for delivery. During transport they often sit for more than 3 days.
I also have a parasitic draw on my NC Miata, and ALSO use a battery tender every time I park it! If you find out the issue, let me know, would be interesting to see if it’s the same!
3 days is definitely not good for an NC. That said, mine is usually around 2 months before the battery is drained. That should give you some better expectations.
2006 NC owner here with a reasonably new battery. I keep it parked in an attached garage, so no extreme cold or heat. Mine will always start after leaving it for 1 month. I probably left it for 2 months at some point in the last two years, and it started, but that feels like pushing it.
The next time a mechanic tells you cars can't sit for a few days without a battery drain problem, ask how people who park at the airport get home after a two-week trip.
The next time a mechanic tells you cars can't sit for a few days without a battery drain problem, ask how people who park at the airport get home after a two-week trip.
my battery is in fairly good shape. when my nc was sitting for long periods (months), the old battery eventually gave out. I had to have it jumped once, then bought a li-on battery to jump it with just in case.
the real key to long storage (beyond a trickle charger) is clean gas.
right now, though, it only has to handle 2 weeks of sitting at most (in an attached garage).
the real key to long storage (beyond a trickle charger) is clean gas.
right now, though, it only has to handle 2 weeks of sitting at most (in an attached garage).
For my VW van it was alternator - one of the diodes in the rectifier was obviously blown and leaked current backwards.
I solved one recently. Really wish there was a simple time logging multimeter that you could leave plugged in 24 hours.
Most cheap multimeters have an ir or similar data port you can use for that.
Just need to hold a button when turning on the meter to disable the auto power of timer, then you run software on a laptop to log the data to csv
Just need to hold a button when turning on the meter to disable the auto power of timer, then you run software on a laptop to log the data to csv
At the very least you know to which 2 mechanics you should never give your car to
have similar issue with 2011 nissan maxima w/ key fob. guess i have a new weekend project on my hands.
> It seems like mechanics really don't like digging into the electrical part of the car.
this is like saying that computer programmers don't like digging into the proprietary and binary blobs from other vendors.
I am trying to say it's not fair to blame mechanics because even if they want to dig into the electronics, the car manufacturers take active measures to prevent 'random mechanics' from digging around.
I suppose there are many rational and reasonable way to justify why this is so; probably all having some form of "because safety" and "because IP of vendors".
this is like saying that computer programmers don't like digging into the proprietary and binary blobs from other vendors.
I am trying to say it's not fair to blame mechanics because even if they want to dig into the electronics, the car manufacturers take active measures to prevent 'random mechanics' from digging around.
I suppose there are many rational and reasonable way to justify why this is so; probably all having some form of "because safety" and "because IP of vendors".
My father (a professional auto mechanic) took about 6 months to find a random engine shutoff during harder cornering in his Toyota, the culprit was a damaged inner insulation layer for a few wires within the wrapped wiring harness for the ECU, engine moving on the engine mounts would sometimes cause a slight harness shift and a short would cause a hard reset of the ECU.
Another story I have is my computer geek friend finding an issue with my Subaru Legacy, when no other mechanic could (I tried 3). The issue was that the car was old, first gen OBD, he downloaded some legacy asm ECU reader and made a diagnostic cable from spare parts, the issue was that the car would not start when cold, or be extremely hard to start. The culprit was damaged wire that tells the ECU that the engine is in cranking condition, therefore needs a different fuelling mode, without seeing this mode there was not enough fuel to start when cranking. Eventually this was found by hooking up an oscillograph to see the injector impulse length (duty cycle), as the old gen. diagnostic didn't show any errors, he compared a working car injectors to mine when cranking cold and found this. 10 years later I'm still amazed by his skill and dedication, I'd have scrapped the car otherwise. The car was sold eventually to another person who restored it (rust repair mostly) and his wife still drives it to this day, a 1994 Subaru Legacy.
Another story I have is my computer geek friend finding an issue with my Subaru Legacy, when no other mechanic could (I tried 3). The issue was that the car was old, first gen OBD, he downloaded some legacy asm ECU reader and made a diagnostic cable from spare parts, the issue was that the car would not start when cold, or be extremely hard to start. The culprit was damaged wire that tells the ECU that the engine is in cranking condition, therefore needs a different fuelling mode, without seeing this mode there was not enough fuel to start when cranking. Eventually this was found by hooking up an oscillograph to see the injector impulse length (duty cycle), as the old gen. diagnostic didn't show any errors, he compared a working car injectors to mine when cranking cold and found this. 10 years later I'm still amazed by his skill and dedication, I'd have scrapped the car otherwise. The car was sold eventually to another person who restored it (rust repair mostly) and his wife still drives it to this day, a 1994 Subaru Legacy.
This methodical approach to vehicle diagnostics is something you can see on YouTube at South Main Auto Repair
https://www.youtube.com/@SouthMainAuto
Eric regularly takes the viewer through the entire process including sometimes measuring electronic components with diagnostic tools that include oscilloscope functions.
https://www.youtube.com/@SouthMainAuto
Eric regularly takes the viewer through the entire process including sometimes measuring electronic components with diagnostic tools that include oscilloscope functions.
Pine Hollow Auto Diagnostics goes even deeper. And focuses much more on the diagnostic. These two channels are good together in that they show different sides of the auto repair industry.
Ivan has done some parasitic drain diagnosis in the last few videos, including a new custom made logger that he had sent to him for tracking drain over long duration (like overnight or a couple days).
If you like South Main Auto and you havent' seen Pone Hollow Auto Diagnistics, I think you'll like it.
https://www.youtube.com/c/PineHollowAutoDiagnostics
Ivan has done some parasitic drain diagnosis in the last few videos, including a new custom made logger that he had sent to him for tracking drain over long duration (like overnight or a couple days).
If you like South Main Auto and you havent' seen Pone Hollow Auto Diagnistics, I think you'll like it.
https://www.youtube.com/c/PineHollowAutoDiagnostics
Your friend’s fuel issue seems a lot like the intermittent no-start, low fuel pressure issue I have been debugging (3-series) for over a year now. It has defeated three dealerships and two independent mechanics so far, so I’m taking over the diagnosis now. No clue yet but today’s cars have too damn many computers in them.
Take a look at my other comment
https://news.ycombinator.com/item?id=35516985
https://news.ycombinator.com/item?id=35516985
which engine is that? I had an N54 335 for 5 years too, even E36 era BMWs have vastly superior error logging compared to JDM from that vintage. I hope you find your issue, but if it defeated dealerships it sounds troublesome. Log some live data with INPA if it's an older one, I have no experience with BMWs post EXX series to drop any advice...
Yea, N54. INPA helps confirm things, but just the idea that you have to pour over logs to diagnose a system that should be simple and straightforward... sigh. My last car was from the '80s and you could wrench pretty much anything you needed to without having to negotiate with a dozen computers running the show.
I loved my N54 dearly, HPFP is a consumable item there though (30-50k miles), I'd change that as a precaution, especially if your car is tuned.
Skill and dedication indeed. The cost of being able to determine the root cause of the car problem probably costs more than the car itself. By a factor of ten.
That's a nightmare and sounds like a really bad software bug... I have one like this even as we speak.
I used to be a computer engineer working on embedded systems for automobiles. Quiescent current is what the normal proper draw is called for these systems when the car is off. We worked very hard getting these numbers in spec but it was hard to catch everything especially in this case where the issue is probably due to software missing the sleep state for that module. This could be from bad code or your CAN/LIN bus is messed up in your car. 99% of mechanics (and engineers) have no idea where to start with debugging these issues and the answer will be "replace the module".
I have failed to find the parasitic draw on an RV (slower than this one, it takes a couple weeks to kill the battery). I finally got a "Top Post Battery Master Disconnect Switch", which is a little dinglebob that goes between the battery post and cable and lets you easily break the circuit. I highly recommend the $12 solution for an intermittently used vehicle.
I thought about this but the problem with newer cars (mine at least) is killing the power wipes the memory so it won't pass an emissions check (or something like that). After my battery died I had to find an excuse to drive an extra 100 miles so I could pass emissions.
On my car the emissions laws definitely caused more emissions than they saved that day.
On my car the emissions laws definitely caused more emissions than they saved that day.
I once had a car where I had to disconnect the battery to clear the check-engine light so it would pass a state inspection.
That usually doesn't work anymore as mechanics can tell that you've done that when hooking up the ODBII port.
I recently noted in my OBD2 scanner that some vehicles support the measure of miles since check engine lights were cleared or something to that extent. It made me ponder at some point in the future there is going to be regulation mandating that to pass an emissions test you must pull up to the test station with a minimal threshold mileage on the car to vet no check engine lights have tripped in that interval.
That's already a thing. Many sensors will be in 'learn mode' and you can't pass emissions until they are fully active.
I hear this all the time, but I have never understood it. If I clear my drive cycle monitors, they are all passing again just a few miles later. Do some vehicle manufacturers just put insane constraints on the drive cycle monitors?
> Do some vehicle manufacturers just put insane constraints on the drive cycle monitors?
Yes. Combine with the fact some only pass after certain conditions (eg. over 3000 revs for 10 mins, or idle for 5 mins, or only after 3 starts, only when the outdoor temperature is within this range, etc). Sometimes those conditions aren't stated in the manuals.
That makes the checks passing seem more like a random process and driving more will usually make them pass, eventually.
And drivers without a code reader won't know when it has passed, so they are usually instructed by mechanics to drive a long way to be sure before taking it in for a test (don't want to have to reschedule the test just because you didn't drive it enough).
Yes. Combine with the fact some only pass after certain conditions (eg. over 3000 revs for 10 mins, or idle for 5 mins, or only after 3 starts, only when the outdoor temperature is within this range, etc). Sometimes those conditions aren't stated in the manuals.
That makes the checks passing seem more like a random process and driving more will usually make them pass, eventually.
And drivers without a code reader won't know when it has passed, so they are usually instructed by mechanics to drive a long way to be sure before taking it in for a test (don't want to have to reschedule the test just because you didn't drive it enough).
And some jurisdictions will pass some “not ready” codes because a proper cycle may not happen for months.
A code reader really pays off sometimes to reset everything :)
A code reader really pays off sometimes to reset everything :)
There is a drive cycle set of requirements and it’s usually possible to clear them in under 20 miles. Trying to figure which part of the cycle isn’t accomplished yet is the challenge. I’ve chased it down on my wife’s Honda when we were trying to get it to go “Ready” the same afternoon. Usually just not doing anything unusual for a day or so of normal use is enough, but you can often query the OBD2 system to get the portion of the cycle that’s not yet complete. Just doing a long highway drive isn’t going to do more than a moderate highway drive already did.
That seems reasonable since anyone could clear and tune an engine with minimum effort to pass emissions without a history requirement.
You can also grab a trickle-charger and use that when it's at rest, which can (on modern vehicles) prevent the computer from going nuts.
If you're fancy, you can even make it a quick-disconnect setup so that if you drive away with it still on, it won't break anything (or do the poor-man's version where you have the wire connected to the wheel chocks).
If you're fancy, you can even make it a quick-disconnect setup so that if you drive away with it still on, it won't break anything (or do the poor-man's version where you have the wire connected to the wheel chocks).
> RV
I'm reminded how often people come to the RV forum trying to figure out parasitic draw. The answer almost always ends up being the propane detector. People forget it's even there.
Less of an issue on newer RVs that come with at least one basic solar panel installed from the factory.
I'm reminded how often people come to the RV forum trying to figure out parasitic draw. The answer almost always ends up being the propane detector. People forget it's even there.
Less of an issue on newer RVs that come with at least one basic solar panel installed from the factory.
That's one clean burning parasitic draw I tell ya hwat.
I installed a battery disconnect switch on the dashboard of my jeep. There's a spot that seems made for it. It was a $27 solution, but I don't have to pop the hood. And it solved my charge parasite problem instantly.
I'm surprised it didn't already have a master shut off switch next to the battery. You should always shut off / disconnect the battery when not in use because, as someone else pointed out, the propane detector will drain it.
You really should have one anyway. Good for emergency shutoff.
This is type of thing I've seen Eric O. over at South Main Auto[1] fix in dozens of videos. Mad troubleshooting skills, works hard to find root causes of things. He's pretty amazing, hidden away in some no-account town in upstate NY.
1 - https://www.youtube.com/@SouthMainAuto
1 - https://www.youtube.com/@SouthMainAuto
I really enjoy his channel- another good one is the Pine Hollow Auto Diagnostics channel, which has dozens of really involved parasitic draw diagnoses, have learned a great deal from that one.
Man, I would love for him to look at my 2003 Ford Ranger. I turned on the headlights and the anti-lock breaks engaged and the gauges randomly fluctuated. That's the most recent 'fun' story I have with it... Had a parasitic drain in this thing for 5+ years, but it operates 100% fine as long as I keep the battery charged with a tickle charger and can avoid jumping it. I've mentioned this to nearly every mechanic in the last 5+ years, no one has ever found the issue. Three said replace the battery, 1 said get a new alternator. Seems like those 2 would be the go-to for mechanics these days.
Check your ground wires, especially when you flip the light, honk the horn, or anything that is relatively high current. Corrosion on a wire can be fixed with Deoxit spray.
Although I perform as much of my own auto maintenance as I can, I watch Eric O because he's entertaining, and all of the technical wisdom and advice just comes along for the ride.
Thanks for this timely post. I'm literally in the middle of running down a parasitic drain on my Nissan Xterra.
I tracked mine down using a different method which helps when your fuses don't all have test points (and no conversion table needed).
- Disconnect negative battery cable
- Switch your multimeter to 10A (don't forget to swap lead ports)
- Connect the multimeter in-line between the negative cable and negative battery post
- The readout on the multimeter should now tell you how much drain you have
- Start pulling fuses one by one until you see the amps drop to normal
I tracked mine down using a different method which helps when your fuses don't all have test points (and no conversion table needed).
- Disconnect negative battery cable
- Switch your multimeter to 10A (don't forget to swap lead ports)
- Connect the multimeter in-line between the negative cable and negative battery post
- The readout on the multimeter should now tell you how much drain you have
- Start pulling fuses one by one until you see the amps drop to normal
And pro-tip if you need to go down the line past the fuse box: if you have a DC clamp-on ammeter, you can do multiple windings to 2x or 3x the current readings for smaller draws that the clamp-on might not pick up on.
Whoa, thank you. I was disappointed to read in my multimeter's manual (klein CL800) that the resolution for DC (up to 60A, if I'm reading "range" in the chart correctly) was only 10mA.
One thing I haven't seen mentioned yet: If your battery is dying way sooner than it should be, and if you have _any_ aftermarket equipment installed (radio, backup cam, alarm, remote start, trailer light module), that should always be the VERY first thing to suspect.
These things are not engineered to the same requirements as the OEM electronics, and if they are drawing 10s of milliamps while the car is off, that is certainly enough that you wouldn't notice an issue with a newer batter and a car being driven every day. But if your driving patterns change and the battery gets older, suddenly your battery is dying all the time and "nothing has changed."
These things are not engineered to the same requirements as the OEM electronics, and if they are drawing 10s of milliamps while the car is off, that is certainly enough that you wouldn't notice an issue with a newer batter and a car being driven every day. But if your driving patterns change and the battery gets older, suddenly your battery is dying all the time and "nothing has changed."
Also 12v USB phone chargers that stay hot when the car is locked. This drove me crazy thinking it was a car issue draining the battery or alternator.
This is exactly what happened to my car - I fitted a reversing sensor (this was some time ago).
About a month later the battery was flat - but we didn't drive that often so I thought it might be that. Charged it and was fine for another month or so, but then it started to happen more and more frequently. I took to disconnecting the battery each time I parked up the car.
It was only when I came to scrap the car (for unrelated issues) and went to remove the reverse sensors to use on another car that I saw a single thread of wire that was running off the reverse light, was causing a short. Ah well - lesson learnt!
About a month later the battery was flat - but we didn't drive that often so I thought it might be that. Charged it and was fine for another month or so, but then it started to happen more and more frequently. I took to disconnecting the battery each time I parked up the car.
It was only when I came to scrap the car (for unrelated issues) and went to remove the reverse sensors to use on another car that I saw a single thread of wire that was running off the reverse light, was causing a short. Ah well - lesson learnt!
I found that my old (1997) Range Rover would flatten its battery after being parked outside my house over a weekend. If I didn't drive it for two or three days, it would be too flat to start.
It turns out that the BECM (body ECU) wakes up from sleep if it hears anything coming in from the RF keyfob receiver, on 433.92MHz, a standard ISM frequency. If it's not a valid fob code (and there is a surprisingly complex rolling code sequence) it'll go back to sleep after 20 minutes or so.
The oil tank gauge for my central heating had a remote sensor that... yup. Transmitted on 433.920MHz, of course.
The aerial for the keyfob is on the rear right corner of the vehicle, the oil tank for the heating was on the left-hand side of the driveway right at the back of the house, so when I backed into my driveway it was right beside the receiver.
I managed to do just fine with popping the lid off the oil tank once a month and looking inside to see how much fuel was left, having taken the battery out of the tank sender.
It turns out that the BECM (body ECU) wakes up from sleep if it hears anything coming in from the RF keyfob receiver, on 433.92MHz, a standard ISM frequency. If it's not a valid fob code (and there is a surprisingly complex rolling code sequence) it'll go back to sleep after 20 minutes or so.
The oil tank gauge for my central heating had a remote sensor that... yup. Transmitted on 433.920MHz, of course.
The aerial for the keyfob is on the rear right corner of the vehicle, the oil tank for the heating was on the left-hand side of the driveway right at the back of the house, so when I backed into my driveway it was right beside the receiver.
I managed to do just fine with popping the lid off the oil tank once a month and looking inside to see how much fuel was left, having taken the battery out of the tank sender.
Can't recall where, but I recently learned this was a common issue at airports in the early days of wireless key fobs. The radar sweep at the airport would wake up the receivers causing cars parked there for a while to have dead batteries.
Had the same problem recently with a 2011 Mercedes. Didn’t figure it out until eventually the Keyless Go module (which allows push to start and automatic door unlocking) died. This fixed the parasitic drain.
Apparently when these sorts of modules are dying they fail to turn off and drain the battery by constantly searching for the key fobs. Incidentally while the battery drain was going on the key fob batteries were dying extremely quickly as well, also suggesting a lot more communication than normal was occurring.
Apparently when these sorts of modules are dying they fail to turn off and drain the battery by constantly searching for the key fobs. Incidentally while the battery drain was going on the key fob batteries were dying extremely quickly as well, also suggesting a lot more communication than normal was occurring.
"Fixed" in the same way I can "fix" a stuck key on a keyboard by physically removing it. They've circumvented the problem but are left with less than what they originally had.
Had to scroll down pretty far to find this. Author uses the word "fixed" everywhere but didn't actually fix anything. They just lost a feature of their car they no doubt paid quite a bit extra for on the bottom line.
Ya, keyless entry/start is a huge convenience. I'd be mad if I had to disable those features to use my car.
I was hoping he'd take the module out and open it up to see what was fried/malfunctioning inside.
In the 00s, my dad had an issue with the infotainment system of its Peugeot 407 that would no longer boot.
An official Peugeot mechanic told him that it would cost something like 4200€ to replace the unit, so he asked me if I could have a look.
After a quick search, I found an update for his system, burn it on a CD, and put the CD into its car.
The system updated, and then would work normally. Problem fixed for one hour of my time and a CD.
An official Peugeot mechanic told him that it would cost something like 4200€ to replace the unit, so he asked me if I could have a look.
After a quick search, I found an update for his system, burn it on a CD, and put the CD into its car.
The system updated, and then would work normally. Problem fixed for one hour of my time and a CD.
A lot of dealership mechanics are mindless flowchart followers that aren’t even allowed to use their brain.
Though I’m surprised “update” wasn’t a part of that official flowchart.
Have had dealership mechanics ignore my notes and identify a part as being failed despite my method of 100% excluding that part as being bad.
Though I’m surprised “update” wasn’t a part of that official flowchart.
Have had dealership mechanics ignore my notes and identify a part as being failed despite my method of 100% excluding that part as being bad.
Theybare because they are trained to be. You are actively dissuaded from any diag work, because it can be harder to justify your hours to the customer and dealerships are awful. For a mechanic, its a good and bad job. Nevermind ASE certification that encourages the same. Only small indie mechanics have the freedom to do good work.
Hah. I’ve replaced the battery in our Subaru Outback on average once per year, which is way too high for this environmental minded person.
I just went out last night to grab something from the car and it was making a loud electrical whirring noise. I had driven it several hours prior, no idea how long it had been going. I recorded a video and it is clearly audible. I started it and turned it off again, and the noise stopped.
Friend of mine (and several other commenters here) has an old pickup with a switch on the steering column that cuts the circuit at the battery, I’m ready to install one on both my cars.
I just went out last night to grab something from the car and it was making a loud electrical whirring noise. I had driven it several hours prior, no idea how long it had been going. I recorded a video and it is clearly audible. I started it and turned it off again, and the noise stopped.
Friend of mine (and several other commenters here) has an old pickup with a switch on the steering column that cuts the circuit at the battery, I’m ready to install one on both my cars.
That whirring noise is likely from the EVAP system of your Subaru. See below threads for more info about it. Having to replace your battery once per year is not normal though so there is definitely something else going on.
https://www.clubcrosstrek.com/threads/buzzing-sound-from-pas...
https://www.subaruxvforum.com/threads/whats-that-sound.14672...
https://www.clubcrosstrek.com/threads/buzzing-sound-from-pas...
https://www.subaruxvforum.com/threads/whats-that-sound.14672...
I would check your owner's manual. Mine says not to be alarmed about noise coming from under the truck. In my case it's a fuel evaporation check.
Ugh, I've also got an Outback (2019) with a regularly dying battery. Let me know if you ever find any leads on the root cause.
I have a 2019 Outback as well. I just went through some battery dying issues. Took it to the dealership, they said that the Onstar module (after 2-3 years) will start to malfunction and create a parasitic drain.
The only fixes they have (as of a couple weeks ago) was to a) buy a new module (which are on back order because a number of peeps are having this problem) -- which will eventually break because they haven't reengineered it. b) disconnect the Onstar module via a circuit (my tweeters are on the same circuit, so I'd lose them) c) Open up the center console and only disconnect the Onstar module.
I opted for C (which I was charged an hour of labor for). The tech there said to check back in every few months to see if Subaru puts out a new module that fixes the issue.
Edit: The tech told me the Onstar module was a specific issue with 2019 Outback/Legacy, and that 2018 and back doesn't have that problem and in 2020 they redesigned the whole model, so the newer ones don't have that issue.
The only fixes they have (as of a couple weeks ago) was to a) buy a new module (which are on back order because a number of peeps are having this problem) -- which will eventually break because they haven't reengineered it. b) disconnect the Onstar module via a circuit (my tweeters are on the same circuit, so I'd lose them) c) Open up the center console and only disconnect the Onstar module.
I opted for C (which I was charged an hour of labor for). The tech there said to check back in every few months to see if Subaru puts out a new module that fixes the issue.
Edit: The tech told me the Onstar module was a specific issue with 2019 Outback/Legacy, and that 2018 and back doesn't have that problem and in 2020 they redesigned the whole model, so the newer ones don't have that issue.
I have the same issue, seemingly, with my 2017 Outback. My battery kept dying for which I got a lot of run around from the dealer (gaslighting about keyless entry drains it if the key is too close to the car, etc.) Eventually I found a Reddit post about the DCM (Starlink) module, removed this fuse, and it hasn't died since. It sounds like it wakes up in the middle of the night to do something and thereby drains the battery, so whenever they test at the dealer for extra drain, they find nothing. Having that fuse out kills some speakers and the mic too, so it's a kind of annoying solution. I have not gone back to complain again recently though, so maybe they can do whatever it is they did for you. I saw some posts about wiring it to another circuit that's off when the car is off, but I am not confident doing that myself.
Starlink! (not Onstar) ... I'm not subscribed myself so I can never remember the name.
> Having that fuse out kills some speakers and the mic too, so it's a kind of annoying solution.
That's exactly why I didn't choose that option.
One thing I'll mention about the center console solution (which I'm having trouble confirming), when I was driving home I thought the sound from the speakers was much quieter. I tried zoning the music to the quiet speakers and there was little to no sound coming out. I took it back and they took the console apart and reset everything and then it "just started to work". The tech seemed as baffled as me, he was frustrated he couldn't tell me why it started working. All that's to say YMMV.
> Having that fuse out kills some speakers and the mic too, so it's a kind of annoying solution.
That's exactly why I didn't choose that option.
One thing I'll mention about the center console solution (which I'm having trouble confirming), when I was driving home I thought the sound from the speakers was much quieter. I tried zoning the music to the quiet speakers and there was little to no sound coming out. I took it back and they took the console apart and reset everything and then it "just started to work". The tech seemed as baffled as me, he was frustrated he couldn't tell me why it started working. All that's to say YMMV.
One was a PEBCAK that I personally consider a design flaw: the rear gate light switch is on the ceiling at the opening of the gate (on our 2016), and the “on” position is activated by moving the switch outwards, ie towards the back of the vehicle. It had been inadvertently dragged into “on” position while unloading bikes, rafts and other outdoor gear, and then killed the battery while we were out for a couple days.
Didn’t realize this was happening until returning to a drained battery on two occasions, and then observing the effect later while doing some garden work, when I finally connected the dots. I’ve since duct taped it into the “off” position.
Didn’t realize this was happening until returning to a drained battery on two occasions, and then observing the effect later while doing some garden work, when I finally connected the dots. I’ve since duct taped it into the “off” position.
Same here, 2018. Last battery replacement was 6 months, let's see how long this one lasts.
South Main Auto has an excellent youtube channel with various parasitic draw videos. For those struggling, it's a good watch.
Here's one such: https://www.youtube.com/watch?v=qDqlG5bRq8k
Here's one such: https://www.youtube.com/watch?v=qDqlG5bRq8k
Second this suggestion for anyone working through parasitic draw issues. He has a very solid, logical process for working through this (among other issues). I always enjoy watching the videos because it's like watching a who-dun-it where you're trying to guess the cause as he gathers evidence.
Anecdata: Some Hondas (e.g . 2010 Element) exert enough parasitic drain to put the car into a chronically undercharged state if a door is left ajar overnight.
The wrong thinking turned out to be: Car is safe in garage, interior lights go off, and my hands are full now -- why bother going back to the door to shut it completely?
The wrong thinking turned out to be: Car is safe in garage, interior lights go off, and my hands are full now -- why bother going back to the door to shut it completely?
Never seen this issue with any hondas, including elements, sure you got a good battery? But leaving a door ajar is user error.
Personal vehicles are getting way too complicated now. Too many electronic components that can be points of failure.
Recently viewed a video on “steer by wire yoke”
https://m.youtube.com/watch?v=agMrewRJTow
It’s very interesting but there are so many additional motors, sensors, and actuators to simulate the same experience as mechanical based steering.
If you lose electronic assistance in traditional mechanical based steering, you have to apply more force as a driver and makes the experience difficult.
What happens if I lose one or more components in this “steer by wire yoke”? Seems like as a driver you are shit out of luck. If you are a pedestrian, bye bye.
All I want is a walkable city with public and alternative forms of transportation. All of these “car innovations” are mostly useless.
Recently viewed a video on “steer by wire yoke”
https://m.youtube.com/watch?v=agMrewRJTow
It’s very interesting but there are so many additional motors, sensors, and actuators to simulate the same experience as mechanical based steering.
If you lose electronic assistance in traditional mechanical based steering, you have to apply more force as a driver and makes the experience difficult.
What happens if I lose one or more components in this “steer by wire yoke”? Seems like as a driver you are shit out of luck. If you are a pedestrian, bye bye.
All I want is a walkable city with public and alternative forms of transportation. All of these “car innovations” are mostly useless.
Well, they’re also incredibly noisy and unreliable. I’d be willing to bet most of the ecu code is simply Bayesian filters to deal with terrible sensor data. Cars are hard environments to get the kind of high fidelity readings you really need for the nitpicky engines they have now.
Had a similar issue with a 1.5-year-old vehicle that would have the battery fully drained in a little over a week if the vehicle wasn't driven. Had the dealership "fix" the problem three times and the problem was never fixed. I used the lemon law to get a brand new vehicle. I won't name the brand, but dealing with the manufacturer for this was rather trouble free.
Name and shame, help your fellow HN readers out, no shame in getting a lemon!
Intermittent car issues are the worst! Related is the 'My car hates vanilla ice cream' story:
https://web.archive.org/web/20060213052358/http://www.campbe...
https://web.archive.org/web/20060213052358/http://www.campbe...
That’s an old urban legend: https://www.snopes.com/fact-check/cone-of-silence/
Maybe I've read this before, but I guessed by the problem description that the answer probably had something to do with time...
I've never understood why cars don't just cut power before the battery is too low to start. If that's too complicated then just have an option to cut all power after X hours of non-running time.
I bet the old popular theft of car radio is a root cause; cars needed to stay running to keep the alarm active and power the radio continuously so it wouldn't require the unlock code every time you start the vehicle.
It's actually pretty impressive how much power even a 200mA draw at 12V is over a few days; it's about 58 Watt-hours or 3.5 iPhone batteries per day.
I bet the old popular theft of car radio is a root cause; cars needed to stay running to keep the alarm active and power the radio continuously so it wouldn't require the unlock code every time you start the vehicle.
It's actually pretty impressive how much power even a 200mA draw at 12V is over a few days; it's about 58 Watt-hours or 3.5 iPhone batteries per day.
Cutting the power is easy, the hard part is for the car to know when/how to reconnect power when the driver wants to start the vehicle. I guess with a physical ignition switch, the mechanical motion of the tumbler could reconnect power. But, most cars don't have ignition tumblers anymore.
> I've never understood why cars don't just cut power before the battery is too low to start.
The design of most cars can't tolerate losing 12V DC power without problems. Clearing superfluous codes after a battery swap is SOP. Cars are build for two simultaneous customers: regulatory regimes and work-a-day 13.5K miles a year workers that start (and thus charge) their cars at least every 48-72 hours. Other use cases aren't really considered.
Some are better than others though. I have a 21 year old Nissan with a factory alarm and key fobs that sits for a month or more and starts fine every time. Heating helps a lot.
The design of most cars can't tolerate losing 12V DC power without problems. Clearing superfluous codes after a battery swap is SOP. Cars are build for two simultaneous customers: regulatory regimes and work-a-day 13.5K miles a year workers that start (and thus charge) their cars at least every 48-72 hours. Other use cases aren't really considered.
Some are better than others though. I have a 21 year old Nissan with a factory alarm and key fobs that sits for a month or more and starts fine every time. Heating helps a lot.
Something I forgot to mention here that supports my view that designers of modern cars are not thinking about this problem at all: after battery power is lost cars lose their maps and tables for ignition timing and fuel delivery. After a usually short period of time (20 minutes is typical) that data is lost and the engine etc. has to 'relearn' when the power is restored and the vehicle is operated for a time.
> why cars don't just cut power before the battery is too low to start.
Some cars computers block the start by software if the battery is "slightly" low (even if would not be too low to start).
Some cars computers block the start by software if the battery is "slightly" low (even if would not be too low to start).
Not just for highly computerized cars, I have a 97 Ranger where literally everything is manual and I don't even have a dome light anymore. There's a parasitic drain I can't quite figure out so I just make sure to start it every once in a while. Since I'm a year round bike commuter the truck can sit around for a long time, especially in winter when there's no house and garden projects. I've considered adding a manual battery disconnect, the only thing I'd lose are the pre-programmed radio stations.
Solar panel? Depends how big the draw is.
After the pandemic started I was using my car about once a month or two and the battery was getting drained enough that the car would not start. This solar panel fixed that problem:
https://www.amazon.com/gp/product/B07Y5TKMZ4
It is powerful enough to actually charge the battery instead of just maintain it, and it has a charge controller so it won't overcharge the battery. It did fail me once when we had a couple months of rain and overcast weather, but kept the car going otherwise. Eventually replaced the battery with an AGM battery and that plus the solar charger has worked very well.
https://www.amazon.com/gp/product/B07Y5TKMZ4
It is powerful enough to actually charge the battery instead of just maintain it, and it has a charge controller so it won't overcharge the battery. It did fail me once when we had a couple months of rain and overcast weather, but kept the car going otherwise. Eventually replaced the battery with an AGM battery and that plus the solar charger has worked very well.
Good idea, solar panel for trickle charge. Could power a few other things like a wildlife cam and weather station.
Electrical issues on cars are the absolute most maddening things to diagnose and fix. I’ve restored several cars and worked on every car I own and the one thing I loathe to do is figure out an electrical failure. Even in older cars, it’s a pain in the ass.
I have an 89 e30 and one time the dash cluster started acting up. Essentially the tach and speedo weren’t responding (they’re not cable driven). Took out the cluster, checked all the connections, checked the wiring diagram to see if there were any potential grounding points I might want to consider. Nothing.
Finally called a local bimmer indie shop and asked them what they thought and they directed me to the small reverse light switch wire that feeds down through the shifter hole into the transmission tunnel. Apparently it often rubs against the body and becomes shorted. I looked and sure enough it was bare. Patched it and all was well.
This wire, mind you, is not at all on the dash cluster circuit. There’s no reverse indicator light on the cluster or anything like that. I would have never had any reason to suspect it was the problem. This is the nature of automobile electrical issues.
I have an 89 e30 and one time the dash cluster started acting up. Essentially the tach and speedo weren’t responding (they’re not cable driven). Took out the cluster, checked all the connections, checked the wiring diagram to see if there were any potential grounding points I might want to consider. Nothing.
Finally called a local bimmer indie shop and asked them what they thought and they directed me to the small reverse light switch wire that feeds down through the shifter hole into the transmission tunnel. Apparently it often rubs against the body and becomes shorted. I looked and sure enough it was bare. Patched it and all was well.
This wire, mind you, is not at all on the dash cluster circuit. There’s no reverse indicator light on the cluster or anything like that. I would have never had any reason to suspect it was the problem. This is the nature of automobile electrical issues.
While not a fix for this problem, a nice form of insurance is a Lithium Ion jump start battery[1]. I'm amazed that a hand-held battery can discharge fast enough to jump start my car, but ... it works great.
[1] https://www.amazon.com/dp/B0B55RFM1Z
[1] https://www.amazon.com/dp/B0B55RFM1Z
Might the battery charge a capacitor?
Yeah she had one of these too.
My experience with car mechanics is they are good with mechanical systems, but have little understanding of anything electrical, and even worse with electronics.
P.S. If you're doing a bit of wiring on the car, don't use those crimp on wire connectors. They'll work ok for a year or so, and then start behaving erratically, slowly getting worse and worse. This is because the crimp is simply not tight enough, and the mating surfaces start to corrode.
The best solution is to strip the wire ends, slip some heatshrink tubing over the wires, cut the plastic off the butt crimpon connector, crimp it on, solder the wires to it, move the shrink tube back over the joint and shrink it on.
This goes for any crimpon connector.
Also, don't use the auto wire you get at your local auto parts store for anything in the engine compartment. It won't last in the heat. You gotta get heat resistant wiring.
P.S. If you're doing a bit of wiring on the car, don't use those crimp on wire connectors. They'll work ok for a year or so, and then start behaving erratically, slowly getting worse and worse. This is because the crimp is simply not tight enough, and the mating surfaces start to corrode.
The best solution is to strip the wire ends, slip some heatshrink tubing over the wires, cut the plastic off the butt crimpon connector, crimp it on, solder the wires to it, move the shrink tube back over the joint and shrink it on.
This goes for any crimpon connector.
Also, don't use the auto wire you get at your local auto parts store for anything in the engine compartment. It won't last in the heat. You gotta get heat resistant wiring.
> Since I don’t have Mazda’s proprieratry M-MDS diagnostic tool, I couldn’t disable the keyless module in software myself.
Ugh, imagine if normal computers were like that. "Since I don't have Intel's proprietary I-DBT diagnostic tool, I couldn't disable the wifi in software myself."
I guess we're half way there with phones.
Ugh, imagine if normal computers were like that. "Since I don't have Intel's proprietary I-DBT diagnostic tool, I couldn't disable the wifi in software myself."
I guess we're half way there with phones.
I had a 2005 Acura RL which had some pretty fancy electronics for its time. I gave it to my daughter a few years ago and she started reporting that the battery was dying. It would take several days to die, so at first she just jump start the car every couple of days. When she brought it home (she lives 5 hours away) I measured the current draw at >800mA when it should be <20mA.
These cars have a Bluetooth handsfree module that goes bad and starts leaking power. The fix is to bake them in the oven at 350F for 5min to reflow the solder. Already did this twice and then decided to just get rid of it. So that was not the problem.
She needed to get back so we figured out which fuse was the easiest to remove and she lived with that for a couple of months. In the mean time we figured out it was the MICU module, which is the module that controls all the electronic systems and security. Without this nothing works. I was told a new one would be north of $1200 and labor. If they could find one. The dealership said they would chase down the problem again for $165/hr just to be sure... And I would have to leave the car with them until they were ready. Possibly 3 weeks.
I found a couple of the units on ebay for <$100. One was from a 2008 and another one that had some broken plastic on the case for from an early 2005 (same as my car). I tried the first one, nothing worked, all kinds of systems failed. I learned there was an EEPROM chip in the Honda/Acura MICUs that store the codes to make the systems work and are unique for each vehicle. The Dealership can program them for a fee. Having a full electronics lab, I swapped the chips in no time. It was better, but the starter would not engage. In desperation, I did it again on the 2005 MICU and... success!
Mind you, it took >4 hours the first time to get the MICU out and 2 hours to put it back in. I did this at least five times. I got good enough at it that I could do the whole swap in less than an hour. Back and hands were not happy each time I did it for a day or two.
These cars have a Bluetooth handsfree module that goes bad and starts leaking power. The fix is to bake them in the oven at 350F for 5min to reflow the solder. Already did this twice and then decided to just get rid of it. So that was not the problem.
She needed to get back so we figured out which fuse was the easiest to remove and she lived with that for a couple of months. In the mean time we figured out it was the MICU module, which is the module that controls all the electronic systems and security. Without this nothing works. I was told a new one would be north of $1200 and labor. If they could find one. The dealership said they would chase down the problem again for $165/hr just to be sure... And I would have to leave the car with them until they were ready. Possibly 3 weeks.
I found a couple of the units on ebay for <$100. One was from a 2008 and another one that had some broken plastic on the case for from an early 2005 (same as my car). I tried the first one, nothing worked, all kinds of systems failed. I learned there was an EEPROM chip in the Honda/Acura MICUs that store the codes to make the systems work and are unique for each vehicle. The Dealership can program them for a fee. Having a full electronics lab, I swapped the chips in no time. It was better, but the starter would not engage. In desperation, I did it again on the 2005 MICU and... success!
Mind you, it took >4 hours the first time to get the MICU out and 2 hours to put it back in. I did this at least five times. I got good enough at it that I could do the whole swap in less than an hour. Back and hands were not happy each time I did it for a day or two.
Once you find the fuse that passes the highest current, why not just place a switch button in series with it? Turn it off when exiting the car. Add an LED to show when it is on.
It was not all that easy to get to and not all that easy to mount a switch securely near by. May be I just lacked imagination.
The real reason and the part I skipped was the leakage current was getting worse over time. By the time I replaced the MICU it was close to 2A draw. It was just a matter of time before it died.
The real reason and the part I skipped was the leakage current was getting worse over time. By the time I replaced the MICU it was close to 2A draw. It was just a matter of time before it died.
Personally, I'd go for a relay on a non-problematic circuit.
But I also get why you might just leave it disconnected - if it's pulling a few more amps with no clear cause, what is going to go wrong with it next, and what vital system will it take with it?
But I also get why you might just leave it disconnected - if it's pulling a few more amps with no clear cause, what is going to go wrong with it next, and what vital system will it take with it?
Oh a relay that goes on after you turned the key would be very handy. It is rather easy to find a point where there's only a voltage present after/while starting.
Of course, when the array controlled circuit would be vital for entering or starting, this would not be an option.
Of course, when the array controlled circuit would be vital for entering or starting, this would not be an option.
If you’re going to do all that, just rewire it so the circuit only turns on with key-on.
This can be a problem with any modern car. I had a similar problem with my 2011 BMW, but I was partially responsible. I added a device to the CAN bus between the entertainment system and the rest of the vehicle so my passengers could watch DVDs while we were driving. When the vehicle was off, the ECU would stay awake trying to communicate with the entertainment system, which would fail because the device I added was powered off. The car was brand new and the battery died after a month. I removed (and redesigned) the device so it would provide CAN connectivity when off, but had my battery replaced (under warranty) before I re-installed it.
It sucks that auto manufacturers don't consider the consequences of their design decisions. A malfunctioning (or missing) entertainment system should not cause the ECU to drain your battery.
It sucks that auto manufacturers don't consider the consequences of their design decisions. A malfunctioning (or missing) entertainment system should not cause the ECU to drain your battery.
I had a parasitic drain on my Tacoma from my Automatic device (OBD-II reader / GPS tracker). I parked in a garage with no cell service and it drained the battery by constantly trying to connect. It was a non-issue when I commuted daily but started killing the battery when COVID happened and I switched to WFH.
Hard for mechanics to diagnose because they had no idea what that device was and also one of their first steps was to unplug it, put it in a cupholder, and plug their own OBD-II reader in.
Now the Tacoma is parked again most of the time because I got a Tesla and I'm noticing a voltage drop. I need to do more research, I don't know if this is normal for being parked or if there's a drain.
Hard for mechanics to diagnose because they had no idea what that device was and also one of their first steps was to unplug it, put it in a cupholder, and plug their own OBD-II reader in.
Now the Tacoma is parked again most of the time because I got a Tesla and I'm noticing a voltage drop. I need to do more research, I don't know if this is normal for being parked or if there's a drain.
We have a similar problem with a Lexus rx300 2001. The computer never goes to sleep. I was thinking of looking for (or making) a patch-fuse with a kill switch to stop the drain. Computer sleep depends on the flakey door controller switches.
A recent HN post mentioned that a signal like radar from a nearby airport can sometimes be enough to kick the keyless sensor module out of sleep mode and drain the battery. (This was the one about CAN injection attacks).
Wow, I have a 2012 Mazda3 and have the same problem, which only really surfaced during the pandemic when I stopped driving my car regularly. The dealer said it was just a normal level of drain (even though it would die in just 4 days of non-use) and I should get a trickle charger. Which I did, and is annoying, but is something that I can deal with. I’m not sure if I’m willing to disconnect my remote entry to see if this fixes it, but I’m glad others have seen similar behavior because it really bugs me that the mechanics would just shrug and not really diagnose why this was happening.
I solved this problem on my Dad's car by installing a mechanical knife-switch on the battery terminal. Anytime it's going to be parked for more than a few days, I pop the hood and disconnect the battery.
I feel pretty handy with car repair stuff, but "intermittent electrical problems" are the absolute worst. In this case they were pretty lucky to trace it to a specific module. You have miles of cables in a car and and most of them are completely inaccessible. There are never any fun, happy, clever troubleshooting stories. You always feel robbed of your time.
This isn't a new problem either - ask anyone who tried dealing with a British roadster. It's also why I stay far away from used cars with aftermarket accessories.
This isn't a new problem either - ask anyone who tried dealing with a British roadster. It's also why I stay far away from used cars with aftermarket accessories.
My current driver is a pre-2010 vehicle. I really don't want to buy any of these newer cars. Maybe I can import one from Cuba.
New Mechanic: Low battery is causing your low battery
Ok, thanks.
Ok, thanks.
> Dealer: said my car was fine and returned it to me. My car died the next morning.
Least surprising finding
Least surprising finding
Parasitic drains are fun. I usually "fix" them by simply disconnecting the negative battery terminal overnight (or just the specific fuse, if I know which one it is that's causing the drain).
I had to jumpstart a friend's car the other day because she has one of those breathalyzer interlock thingamabobs on it, and between the constant power draw and (probably) a weak battery she had to start her car every day or else it'd be rather quickly bereft of life. Apparently there's a low power mode (hold the button for 5 seconds, then press it again to exit); hopefully that solves the issue.
I had to jumpstart a friend's car the other day because she has one of those breathalyzer interlock thingamabobs on it, and between the constant power draw and (probably) a weak battery she had to start her car every day or else it'd be rather quickly bereft of life. Apparently there's a low power mode (hold the button for 5 seconds, then press it again to exit); hopefully that solves the issue.
I did a write-up when my car battery died on the way to fish fry. Testing for parasitic draw is no fun. https://l-o-o-s-e-d.net/car-hacking
This is a like a metaphor for modern life with technology parasitically draining time and energy from humanity with shit apps and buggy software while the "mechanics" refuse to even acknowledge there is a problem.
I had a similar problem with a Silverado. It is very annoying. When WFH started and I stopped driving every day, I had to jump the battery seemingly at least once a month.
I had people tell me it was the battery - I knew it wasn't because I had replaced the battery a few times due to the parasitic draw emptying it over and over and wearing it out. I took it to a trusted mechanic and they told me they didn't want to fix it. I pulled all the fuses myself, one-by-one, and never figured out which one was the problem.
I had people tell me it was the battery - I knew it wasn't because I had replaced the battery a few times due to the parasitic draw emptying it over and over and wearing it out. I took it to a trusted mechanic and they told me they didn't want to fix it. I pulled all the fuses myself, one-by-one, and never figured out which one was the problem.
Harbor Freight sells a $15 cheapie solar panel (with diode) that plugs straight in to a car's cigarette lighter that essentially 'solves' most parasitic drain problems, if you park outdoors, at least.
https://www.harborfreight.com/15-watt-solar-battery-maintain...
(Not all cars have ports that are live with the key off, but the panel has other ways to wire it)
https://www.harborfreight.com/15-watt-solar-battery-maintain...
(Not all cars have ports that are live with the key off, but the panel has other ways to wire it)
I'm happy you fixed it. I would have nearly lost my mind too. Hopefully figuring out the issue and fixing it is as rewarding as the problem was maddening
I have a drain on my VW Caddy Maxi but had it booked in already for a leisure battery and solar install. When the solar finishes charging the leisure battery the starter battery is then charged. And so hey presto I now have an anti-drain system and haven’t had a problem since. So if you have a parasitic drain and can’t find fix it convert your car into a camper :)
Mechanics are pretty big on youtube, i learnt this type of diagnosis from https://www.youtube.com/@JimmyMakingitwork . He posts daily videos of life in the workshop, so the OP would of saved himself some time if he viewed!
Repairing your car is just like programming, mechanics come in many varieties too.
Repairing your car is just like programming, mechanics come in many varieties too.
I have a parasitic draw on my 2004 Honda Civic back in college. All the mechanics I went to wanted to sell me a battery or alternator. I finally bought a meter with a 10A current limit and tested every fuse each time I parked. It turned out to be an issue with the magnetic AC clutch, so I drove it for 2 more years with the fuse for that component removed.
In hindsight, you could have put a relay on that circuit that was powered by some other circuit... so it only connected the AC clutch circuit when the vehicle was on.
Yeah that would have been smart. What I did instead was just drive with the windows down. :) When it got too hot, I put the fuse back in, kept a jump pack in my trunk, and parked on a hill so I could pop the clutch to get a start.
I have a 2013 Mazda 3 and I've had to replace the battery every year for the past 3 years. I wonder if I have this exact same problem? I don't want to disable the wireless key system though because I like being able to lock/unlock the car without pulling the keys out of my pocket. Is there an alternative to this workaround?
My VW van has a parasitic drain because it's a VW with shitty wiring.
The starter positive wire runs 4 m / 12 ft from the back to behind the passenger seat.
I had to completely redo the dash wiring because the entire thing was a corroded flex "PCB" like the inside of an Apple II or an Atari 2600.
The starter positive wire runs 4 m / 12 ft from the back to behind the passenger seat.
I had to completely redo the dash wiring because the entire thing was a corroded flex "PCB" like the inside of an Apple II or an Atari 2600.
TIL most of HN is struggling with parasitic drains and dying batteries. It's a pandemic!
This guy should look into replacing the fuse/relay for that module. Sometimes the relays can get stuck. Thats what happened to my leaf as it would get a TCM error and drain the battery every 3-4 days. Finally figured it out after a year too lol.
Hello, author here. I edited the article a bit for brevity. But, yes I started by checking all the fuses and relays. I didn't find any bad relays. Unplugging the ROOM fuse also fixed the problem, but at the expense of other interior features (like my stereo).
Yes, but then where is the story of struggle and sacrifice of having to use a metal key each time to unlock the car?
We had a Lexus 450h that was doing this, turned out to be the infotainment screen, which includes the backup camera, infotainment, air conditioning control, radio control etc. Replacement part: $24,000
car was worth about $8,000 at that point, so..gone.
car was worth about $8,000 at that point, so..gone.
My father in law bought a used Jetta that kept having the battery die. Kept going to mechanic and couldn’t find anything wrong, eventually they discovered a hidden gps device that an old dealer must have installed and forgot to remove.
>Sometimes I wanted to pretend the problem didn’t exist more than I wanted to fix it.
Story of my life.
Story of my life.
A common reason for this (no idea on this specific case) is that the backup battery on the alarm (NiCd) is old/failed. The alarm system then keeps trying to charge it, hence the high (and possibly intermittent) drain.
Good troubleshooting. More of a workaround than a fix, but quite possibly good enough. I do wonder what it would need to work as designed though. Is there a dedicated ECU for the keyless system that that harness connects to?
I had a car that would drain its battery if you let it go a week or two without driving it. I just got a trickle charger and left it connected, problem solved.
Not really a great option to leave the hood up all the time if you park outside though.
Not really a great option to leave the hood up all the time if you park outside though.
Well this is entertaining. Our 2012 Mazda CX-7 seems to die if we don't drive it for a week. I've sort of ignored this problem but now I'm going to go check some fuses and see if this is the same problem.
There is a YouTube channel that has a lot of excellent content on finding and fixing parasitic electrical draws. Pine Hollow Auto Diagnostics.
nb: I am not affiliated with this chan, just a fan.
nb: I am not affiliated with this chan, just a fan.
I had parasitic draw from a 12v phone adapter that wasn’t powering down when the car was locked, took me forever to realize that cheap Amazon gadget was causing issues!
I bought an ODB bluetooth adapter. Left it in and kinda forgot about it, kept getting flat batteries. I never expected it to draw so much current.
Why couldn’t he just pull a fuse sending power to one of these systems instead of dismantling the dash to get to the wiring harness?
Hello, author here. I did do as you described first---I pulled the ROOM fuse and the draw also went away. But, at the expense of more interior features (e.g. my stereo).
Might have been easier to pull the head unit and tap into a different power relay with that fuse off then dismantle the dashboard, but my hat’s off to you on a job well done!
I sold my MazdaSpeed 3 due to a parasitic drain - it was at the dealership for 4 months at one point - with no resolution.
Couldn’t he have just measured the resistance of the fuse to determine the current flow? He knew the voltage drop.
You wouldn't need a car if you lived in San Diego - it's the most bike friendly city in the US!
I’ve been wondering if my old HOUSE has parasitic electrical currents but I’m not sure where to start.
There are devices you can get to monitor each one of the circuits from the breaker panel like https://www.amazon.com/Emporia-Monitor-Circuit-Electricity-M... . This would let you narrow it down to a specific circuit. Figuring out what's connected to that circuit and actually taking up the power might be more difficult.
Is it possible the key fob just needs replacement and is causing the intermittent sleep failure?
That's probably what the author was thinking in February 2022 when they removed the batteries from their keyfob and only used the metal backup key, only to have the problem resurface less than a year later. It's probably safe to say that without batteries, the fobs were having no effect on the keyless system housed within the car.
I was also curious about this.
Maybe the keyless entry computer stays awake to try to sync with a fob and then sleeps on success? If a user chooses not to use a fob at all, maybe it stays awake indefinitely trying to find a key to sync with.
Maybe the keyless entry computer stays awake to try to sync with a fob and then sleeps on success? If a user chooses not to use a fob at all, maybe it stays awake indefinitely trying to find a key to sync with.
Yeah sleep-wake problems often are related to things missing or broken in the (poorly constructed) system.
If the software on the car was poorly written, it may not have had a good back-off on the fob check, or if the fob itself was malfunctioning it may have left the car in a weird state.
While I wouldn't expect a fob to drain a car, it certainly doesn't seem implausible, especially given what the fix is.
If the software on the car was poorly written, it may not have had a good back-off on the fob check, or if the fob itself was malfunctioning it may have left the car in a weird state.
While I wouldn't expect a fob to drain a car, it certainly doesn't seem implausible, especially given what the fix is.
From my own experience I believe the issue is that when these modules start to go bad they fail to turn off and stay awake indefinitely.
My conjecture: there is ambient RF noise on key fob's frequency (most likely 315MHz), which is causing the key fob receiver circuit to remain active and process any signals that it receives, rather than going to sleep and periodically waking up to check for incoming transmissions.
Thinking this through a little bit further, I am wondering if subsystems can wake up if someone else uses their fob but the key signal doesn't match. Surely, at some level, something has to wake up to validate this.
Back when I was commuting there was an older subaru I always parked near in the parking garage that, whenever I unlocked my newer subaru with my fob, it’s alarm would go off. I sat there one day and did it over and over again, so it was definitely casual.
I would have fitted a dashboard mounted solar trickle charger and left it at that.
tl;dr my dealer had my car for a week to diagnose an intermittent electrical gremlin.
My maddening intermittent electrical gremlin was with my new to me Mazda3. Occasionally and randomly after in the first few months I had it the throttle would "go to sleep" during normal driving. By that I mean in the process of normal driving I'd suddenly have no throttle response, the car would go to idle, and the only way to get it back was to completely get off the gas pedal and it would respond again as usual. I'm appreciative that worked, but I couldn't shake the idea that if that were to happen during hard acceleration bad things could happen.
My first trip to the dealer yielded a recording in the event log of the throttle shutting off because it saw throttle and brake at the same time, an expected behavior I was told. I assured the mechanic and service manager that I was almost certain this wasn't the case, they had no other explanation, I continued to have the problem and made certain when it happened that I hadn't somehow been on both pedals.
After an email to Mazda's support line with some technical details hoping to get my situation into the right hands, I got a call from the dealer asking to hang onto it until they could replicate the problem.
The service manager or someone else in the shop drove it for the better part of a week, taking real time telemetry while they were in it while I was in a loaner.
Turned out that the problem was the second brake switch hanging on. I found out that there's one switch that talks too the ECU and another that talks to the brake lights, the former being the culprit.
Frustrating as could be, but like a good nerd I found the final diagnosis fascinating. I also wonder and would like to believe that my detailed and informed email to the mother ship made someone pass it up the line until it got into the right hands.
My maddening intermittent electrical gremlin was with my new to me Mazda3. Occasionally and randomly after in the first few months I had it the throttle would "go to sleep" during normal driving. By that I mean in the process of normal driving I'd suddenly have no throttle response, the car would go to idle, and the only way to get it back was to completely get off the gas pedal and it would respond again as usual. I'm appreciative that worked, but I couldn't shake the idea that if that were to happen during hard acceleration bad things could happen.
My first trip to the dealer yielded a recording in the event log of the throttle shutting off because it saw throttle and brake at the same time, an expected behavior I was told. I assured the mechanic and service manager that I was almost certain this wasn't the case, they had no other explanation, I continued to have the problem and made certain when it happened that I hadn't somehow been on both pedals.
After an email to Mazda's support line with some technical details hoping to get my situation into the right hands, I got a call from the dealer asking to hang onto it until they could replicate the problem.
The service manager or someone else in the shop drove it for the better part of a week, taking real time telemetry while they were in it while I was in a loaner.
Turned out that the problem was the second brake switch hanging on. I found out that there's one switch that talks too the ECU and another that talks to the brake lights, the former being the culprit.
Frustrating as could be, but like a good nerd I found the final diagnosis fascinating. I also wonder and would like to believe that my detailed and informed email to the mother ship made someone pass it up the line until it got into the right hands.
He should move to San José.
A few days later, we were visiting them. I looked at the car and saw the door closed, but not properly latched and ever-so-slightly ajar. You know, that half-closed thing car doors do when you don't close them hard enough.
It turns out someone, possibly my son, had been not closing the door completely. This did not keep the lights on or cause any other visible sign, as it would in some cars.
After I told them to slam the door fully shut, never a problem again for 2 years and counting.