Why is solar more expensive in the U.S. than in other countries?(news.energysage.com)
news.energysage.com
Why is solar more expensive in the U.S. than in other countries?
https://news.energysage.com/why-is-solar-more-expensive-in-the-us/
220 comments
> including about $1000 for my electrician to pull some copper, ground everything, and connect to my panel.
Yeah this is the only thing you cannot DIY out of the whole process, knowing where your rafters are is like 50% of the problem especially if it's an older home where warpage is known to happen; the rest is pretty straight forward with snap/rack installs and learning how to bend conduit and making misc brackets.
If anyone is in interested in learning how to do this before giving it a go on their own home, you can join a few installs to get the process down by signing up for Grid Alternatives [0], they allow you to help with an install process up until the tie-in. Hell, you can probably even make friends and get one of the local electricians to come by and do it for a nominal fee if you get on a few good crews.
The paperwork and approval is the real issue these days, especially in CA, because the install process has been pretty much been simplified as much as it can be at this poin.
Well done in the install, it looks pretty clean and especially well done for taking the time to map out your rafters on a roof that looks to have had work done on one side (non shingled). Most installers would probably just eyeball it and hit-miss and then use flashing(s) to hide the messiness which always ends up with some leaks down the line.
11k total install (solo job?) is pretty good especially with how energy prices have soared since your install.
0: https://gridalternatives.org/who-we-are/contact-us
Yeah this is the only thing you cannot DIY out of the whole process, knowing where your rafters are is like 50% of the problem especially if it's an older home where warpage is known to happen; the rest is pretty straight forward with snap/rack installs and learning how to bend conduit and making misc brackets.
If anyone is in interested in learning how to do this before giving it a go on their own home, you can join a few installs to get the process down by signing up for Grid Alternatives [0], they allow you to help with an install process up until the tie-in. Hell, you can probably even make friends and get one of the local electricians to come by and do it for a nominal fee if you get on a few good crews.
The paperwork and approval is the real issue these days, especially in CA, because the install process has been pretty much been simplified as much as it can be at this poin.
Well done in the install, it looks pretty clean and especially well done for taking the time to map out your rafters on a roof that looks to have had work done on one side (non shingled). Most installers would probably just eyeball it and hit-miss and then use flashing(s) to hide the messiness which always ends up with some leaks down the line.
11k total install (solo job?) is pretty good especially with how energy prices have soared since your install.
0: https://gridalternatives.org/who-we-are/contact-us
> Yeah this is the only thing you cannot DIY out of the whole process...
That depends on the state.
In Idaho, you absolutely can. I 100% DIY'd my ground mount install (documented in depth here: https://www.sevarg.net/tag/solar2020/), including all the wire runs and hookups.
A neighbor of mine who I've helped out and has done electrical work has done a more in depth project, including replacing a panel in his house with a different one (225A busbar, derated main breaker on it), 100% himself.
The limits out here are that you have to do it on your primary residence - I can do anything I want (with permits and inspections) where I live, but I can't legally do electrical work on a rental. Nor can I do electrical work on anyone else's house (though, of course, I can provide a set of hands to help them out with wire pulls and such).
That depends on the state.
In Idaho, you absolutely can. I 100% DIY'd my ground mount install (documented in depth here: https://www.sevarg.net/tag/solar2020/), including all the wire runs and hookups.
A neighbor of mine who I've helped out and has done electrical work has done a more in depth project, including replacing a panel in his house with a different one (225A busbar, derated main breaker on it), 100% himself.
The limits out here are that you have to do it on your primary residence - I can do anything I want (with permits and inspections) where I live, but I can't legally do electrical work on a rental. Nor can I do electrical work on anyone else's house (though, of course, I can provide a set of hands to help them out with wire pulls and such).
There is also the slight scam that you can't claim the tax deduction unless you get the "official installer" magic paper. I find that the installers are basically inflating the price by the value of the tax deduction (20-30%).
This always happens for government incentives that require a certification of some kind.
Sometimes the workaround is to go on the two day course and get the certification yourself. That's even easier when the course is 'online' and you can just have the video call running while doing your day job.
Sometimes the workaround is to go on the two day course and get the certification yourself. That's even easier when the course is 'online' and you can just have the video call running while doing your day job.
A flat'ish roof makes DIY a lot more tractable. At my current age, my roof climbing days are over and it's just not worth risking it on my sloped NC roof two stories up...
Nicely done though.
Nicely done though.
How much are you offsetting your electric bill per month?
Our electricity usage increased significantly when we realized that predictable temperatures result in better infant/toddler naps, so the "post-installation" numbers below are for more kWh than the "pre-installation" ones. We were also forced to switch from a "tiered" rate plan to a time-of-use (TOU) one when we applied for net energy metering, which also makes it a little harder to calculate the benefit. But the offset roughly averages out to ~$200/month. I'm unable to access my old bills because I moved to a new house, thus the imprecise numbers.
Your personal benefit is a function of your weather and latitude. High temps reduce efficiency, as do, more obviously, cloud cover and shading. With TOU plans, your benefit will also depend on your usage habits and schedule.
In my case, the benefit was mainly psychological. I never wanted to use AC before, but I started to use it liberally after I turned on my solar system. My wife and child were grateful!
Pre-installation
* June 2019: $160.92
* January 2020: $252.59
Post-installation
* June 2020: $-4.11
* January 2021: $115.27
Your personal benefit is a function of your weather and latitude. High temps reduce efficiency, as do, more obviously, cloud cover and shading. With TOU plans, your benefit will also depend on your usage habits and schedule.
In my case, the benefit was mainly psychological. I never wanted to use AC before, but I started to use it liberally after I turned on my solar system. My wife and child were grateful!
Pre-installation
* June 2019: $160.92
* January 2020: $252.59
Post-installation
* June 2020: $-4.11
* January 2021: $115.27
Do you know how much cooling benefit you get from the panels physically shading the roof?
I did roughly the same thing as the parent poster, but I bought used hardware and got my total installation under $1/Wp. I pay the minimum grid connection charge now. About $12/mo, down from about $150/mo before I got an EV.
Where'd you get used hardware? That's awesome. I moved to a new house, so I'm again in the market for solar hardware!
Used solar panels are fairly common. A few years ago, I bought 20x 250w (5kw) used panels for $740.
Including freight it was $1120.
Including freight it was $1120.
What is a good site to look for used panels?
During my research,
- Recommended from solar forums: https://jaysenergy.wixsite.com/jaysenergy. I haven't bought anything but have communicated with them and gotten a few quotes.
- Santan solar (is where i bought mine from) via ebay (prices were cheaper than their website).
- Craigslist. Occasionally I see posts for people "parting" out used solar panels in bulk.
- Recommended from solar forums: https://jaysenergy.wixsite.com/jaysenergy. I haven't bought anything but have communicated with them and gotten a few quotes.
- Santan solar (is where i bought mine from) via ebay (prices were cheaper than their website).
- Craigslist. Occasionally I see posts for people "parting" out used solar panels in bulk.
Mostly ebay and craigslist. I had some alerts set up and was patient.
One neglected issue in this article is US tariffs on high-efficiency, long-lasting monocrystalline silicon PV panels (only manufactured in China at present, with some subsidiary assemblers in other Asian countries). China developed a low-cost route to single-crystal production technology and that hit the global market around 2015. The USA has no comparable manufacturing technology or capacity, not even close. For example, see this article from 2018:
https://www.pv-magazine.com/magazine-archive/chinas-monocrys...
See also:
> "The new tariff, which went into effect on February 7, 2018, will likely increase home installation prices of solar panels by $500-$1000 for the typical household. Due to the increased costs of obtaining both solar panels and the technology necessary to create solar panels, the amount of solar installations in the US is expected to decrease by 11% by 2022; some experts in the industry predict that installations will decrease by more than 25%. This major hit to a growing industry could result in a decrease in American jobs; layoffs at solar panel manufacturing plants are expected."
https://compareelectricity.com/research/impact-solar-panel-t...
https://www.pv-magazine.com/magazine-archive/chinas-monocrys...
See also:
> "The new tariff, which went into effect on February 7, 2018, will likely increase home installation prices of solar panels by $500-$1000 for the typical household. Due to the increased costs of obtaining both solar panels and the technology necessary to create solar panels, the amount of solar installations in the US is expected to decrease by 11% by 2022; some experts in the industry predict that installations will decrease by more than 25%. This major hit to a growing industry could result in a decrease in American jobs; layoffs at solar panel manufacturing plants are expected."
https://compareelectricity.com/research/impact-solar-panel-t...
Kinda burying the lede:
> To a large degree, it appears the lack of regulatory oversight has allowed for the cheap installation of sub-standard solar panel systems, from the solar equipment and components used in the installation to the actual installation of the solar panels. Interestingly, the same policy and market forces that have helped deliver inexpensive solar to Australian residents are also responsible for the issues observed with Australian solar installations. Though these policies have reduced the time to installation, they’ve also reduced the opportunity to catch errors in installation or issues with equipment.
So, TCO for 20-25 years of service might be a better metric to be using here.
> To a large degree, it appears the lack of regulatory oversight has allowed for the cheap installation of sub-standard solar panel systems, from the solar equipment and components used in the installation to the actual installation of the solar panels. Interestingly, the same policy and market forces that have helped deliver inexpensive solar to Australian residents are also responsible for the issues observed with Australian solar installations. Though these policies have reduced the time to installation, they’ve also reduced the opportunity to catch errors in installation or issues with equipment.
So, TCO for 20-25 years of service might be a better metric to be using here.
TBH, I find that doubtful. If my installer chooses cheap inverters or microinverters, my local inspector won't know or care.
The issues with inspections in the US are more around timing and difficulty. Utilities are not required to respond in a timely manner, so solar companies spend inordinate amounts of time managing the inspection process.
The issues with inspections in the US are more around timing and difficulty. Utilities are not required to respond in a timely manner, so solar companies spend inordinate amounts of time managing the inspection process.
Your inspector may not care, but the licensed and bonded contractor that did the install does care if their work falls through your roof in 10 years time.
You mean the one that was founded a few years ago, and will be "out of business" (operating as a different company) before that happens?
I think our installer is likely to be in business in 10 years, but we have friends whose installers will certainly be out of business by then. (Guess whose installation appears to be riddled with substandard parts.)
I think our installer is likely to be in business in 10 years, but we have friends whose installers will certainly be out of business by then. (Guess whose installation appears to be riddled with substandard parts.)
I learned this lesson the hard way with a roof install :(
I've only had one install done. The issue was a failed power optimizing after only a couple of years. My guess is that the issues in Australia are similar, with substandard equipment and maybe even questionable wiring. I've seen enough of that with US systems to doubt that our systems are more effective at stopping it.
Inspectors don't have infinite expertise, and I've found that they're not really any better at catching or avoiding trades errors than the practitioner.
Given the high level of maturity that quality products have achieved and the significant degree of self-protection and fault-isolation that have been built in, I'm inclined to let any random person install with zero oversight and let them deal with any problems that arise.
Probably the only thing really worth doing is ensuring that products available in a marketplace actually implement requisite user-safety, grid-safety, and self-protection mechanisms. It's too easy in most places to get shady garbage equipment.
Given the high level of maturity that quality products have achieved and the significant degree of self-protection and fault-isolation that have been built in, I'm inclined to let any random person install with zero oversight and let them deal with any problems that arise.
Probably the only thing really worth doing is ensuring that products available in a marketplace actually implement requisite user-safety, grid-safety, and self-protection mechanisms. It's too easy in most places to get shady garbage equipment.
>Inspectors don't have infinite expertise, and I've found that they're not really any better at catching or avoiding trades errors than the practitioner.
I think you're missing the whole point of inspectors. They aren't primarily there to be experts for the well-intentioned contractors to use to catch honest oversights they made (although they can do that too sometimes). They're there to catch the less scrupulous people who take advantage of an ignorant homeowner by making the job seem to be done well but in fact actually doing it dangerously and/or poorly. There is a massive incentive to do this kind of work poorly, because it leads to being able to do it quickly and fitting in more jobs means making more money.
I think you're missing the whole point of inspectors. They aren't primarily there to be experts for the well-intentioned contractors to use to catch honest oversights they made (although they can do that too sometimes). They're there to catch the less scrupulous people who take advantage of an ignorant homeowner by making the job seem to be done well but in fact actually doing it dangerously and/or poorly. There is a massive incentive to do this kind of work poorly, because it leads to being able to do it quickly and fitting in more jobs means making more money.
> There is a massive incentive to do this kind of work poorly, because it leads to being able to do it quickly and fitting in more jobs means making more money.
I really, really want to go see some "contractor installed" solar installs in my area, open up all the panels, see how it's done by the "pros."
Because multiple inspectors have now commented on multiple homeowner installs I've been connected with about "how neat and clean this all is compared to the usual contractor stuff." I assume they're not just buttering up homeowners for no reason (they certainly find things to correct when they're not perfect out of the gate), but... what I consider fairly standard, tidy electrical work gets comments from inspectors. So I have to wonder what sort of crap they're seeing elsewhere.
I really, really want to go see some "contractor installed" solar installs in my area, open up all the panels, see how it's done by the "pros."
Because multiple inspectors have now commented on multiple homeowner installs I've been connected with about "how neat and clean this all is compared to the usual contractor stuff." I assume they're not just buttering up homeowners for no reason (they certainly find things to correct when they're not perfect out of the gate), but... what I consider fairly standard, tidy electrical work gets comments from inspectors. So I have to wonder what sort of crap they're seeing elsewhere.
A fully licensed general contractor moved our compressors to the second-story of our house on a beautiful painted small deck to open up our yard/reduce the noise. Quality, sturdy work. Rated for 3000lbs, got it in writing!
3mo later the “quality and sturdy” deck collapsed 5-10min after my infant daughter and her grandmother (my MIL) were playing outside under it. The units were dangling from the side of our house.
I looked at the collapsed deck: only nails. Let me repeat that, it was only secured with nails. Just dozens of them all over the place.
Never underestimate who will cut corners and how they’ll do it. I’ll never understand how he allowed this to happen. It was utterly baffling.
3mo later the “quality and sturdy” deck collapsed 5-10min after my infant daughter and her grandmother (my MIL) were playing outside under it. The units were dangling from the side of our house.
I looked at the collapsed deck: only nails. Let me repeat that, it was only secured with nails. Just dozens of them all over the place.
Never underestimate who will cut corners and how they’ll do it. I’ll never understand how he allowed this to happen. It was utterly baffling.
There's a lot of details missing from your post, but it's basically a requirement for many of the structural connections (joists/joists hangers) on a deck to be done with nails. Screws are typically very brittle and will snap under high wind loads that decks experience, unless you buy special ($$$) screws. Nails are malleable and will allow more flexing and bending before failing.
There are other structural connections though, and depending on how they are built nails can be perfectly acceptable, bolts may be the right choice, or screws may be. This depends on a lot of factors.
There are other structural connections though, and depending on how they are built nails can be perfectly acceptable, bolts may be the right choice, or screws may be. This depends on a lot of factors.
This was literally an array of far-too-small-nails that were driven straight into the siding (it ripped several boards out). It’s a miracle it stayed up as long as it did.
The fact that it barely lasted three months should tell you how unsuitable the build was, frankly I don’t think you need more detail than that. Not sure why you’re skeptical of my story. The fact that it fell so fast means it was clearly not appropriately secured.
The fact that it barely lasted three months should tell you how unsuitable the build was, frankly I don’t think you need more detail than that. Not sure why you’re skeptical of my story. The fact that it fell so fast means it was clearly not appropriately secured.
Also FWIW, "joist hanger nails" are a special kind of nail that is much shorter than most people might expect.
Joist hanger nails (lots of them, typically 10 required per 2x6 hanger) are the correct way to attach a porch to a house. There is usually a ledger board that is lag screwed or bolted to the house frame, and then joists (nailed in hangers) are extended out to a beam supported by posts.
A collapsed porch is a big deal, clearly. I don't think there's any skepticism of your story, just the ordinary "OK, but" that we often do because it wasn't clear whether you had correctly identified the construction error that caused the failure. Not your job of course -- hopefully the contractor has remedied their bad work.
Also glad everyone is OK!
Joist hanger nails (lots of them, typically 10 required per 2x6 hanger) are the correct way to attach a porch to a house. There is usually a ledger board that is lag screwed or bolted to the house frame, and then joists (nailed in hangers) are extended out to a beam supported by posts.
A collapsed porch is a big deal, clearly. I don't think there's any skepticism of your story, just the ordinary "OK, but" that we often do because it wasn't clear whether you had correctly identified the construction error that caused the failure. Not your job of course -- hopefully the contractor has remedied their bad work.
Also glad everyone is OK!
My apologies for being so defensive. It's becoming clear to me just how emotionally jarring this was.
I didn't let him anywhere near my house agin. I hired a carpenter, an HVAC company, and an electrician, and sent him the bills. Basically played general contractor then had him write me a small check in case a unit fails (both are currently running. We'll see haha).
I didn't let him anywhere near my house agin. I hired a carpenter, an HVAC company, and an electrician, and sent him the bills. Basically played general contractor then had him write me a small check in case a unit fails (both are currently running. We'll see haha).
As Quesera mentioned, I wasn't trying to be skeptical about your deck falling down. Sounds like the deck portion was built decently, but there was no ledger board or similar included to tie the deck in to the house structure. Sorry to hear that happened, stuff like that is always a shock.
The intent of my comment was to make sure people didn't come away from your comment thinking "nails = bad" and freak out about their own decks/structures.
Hopefully you got your situation sorted out properly!!
The intent of my comment was to make sure people didn't come away from your comment thinking "nails = bad" and freak out about their own decks/structures.
Hopefully you got your situation sorted out properly!!
Like I said to them, I apologize for being so defensive. You’re absolutely right to point that out. Appreciate the well wishes!
The first rule of contracting is always do shitty work. Only fix it if the lead or inspector requires it. Eventually when you're really skilled you can do exactly the right amount of shitty work that doesn't get called out. Contractors that go out with the ambition of doing great quality work don't last long in most markets. The biggest force on this is that the lead is going to find something wrong with great work only almost as frequently as they will shitty work. So do the bare minimum on the first run.
I must not be a good contractor. I try to only do good work and I turn down jobs if I can't do it correctly for the time and money the client desires. But I also have steady work so I can afford to be picky.
Most good contractors have steady work, because they are known to be good. They turn down many jobs that are either too small or have too small a budget. The contractors who are available are either new and unproven, or the bad ones.
It's like software development. Good developers are well paid and work on large, interesting projects. Bad developers are doing piecework small jobs for lower pay.
It's like software development. Good developers are well paid and work on large, interesting projects. Bad developers are doing piecework small jobs for lower pay.
A decent portion of my work is fixing what those bad contractors do. It can be frustrating sometimes.
careful, you're on HN - the narrative is that people who actually build things with their hands are lazy borderline criminals and out to steal as much as they can from the noble, erudite developers who could do just as good a job anyway, no, better! if they wanted to.
> So I have to wonder what sort of crap they're seeing elsewhere
Professionals who know the code to the letter will happily build a rats nest that meets the code to the letter and rightfully tell the inspector to F-off if they get uppity.
Homeowners try to make their stuff look nice because they are dependent on the inspectors good graces because they do not have the requisite knowledge to argue with them so they try to stack the deck in their favor by making the inspector's job easy. (And they know the next person dealing with the panel will probably be them so they have another incentive to make it clean).
Professionals who know the code to the letter will happily build a rats nest that meets the code to the letter and rightfully tell the inspector to F-off if they get uppity.
Homeowners try to make their stuff look nice because they are dependent on the inspectors good graces because they do not have the requisite knowledge to argue with them so they try to stack the deck in their favor by making the inspector's job easy. (And they know the next person dealing with the panel will probably be them so they have another incentive to make it clean).
Yeah... that's about my logic. I know the person who's going to have to fight with it later, for sure.
I'm just wondering how bad a typical solar install is, that what I consider "sane and reasonable wiring I can visually trace without heroics" is worth mentioning specifically.
I'm just wondering how bad a typical solar install is, that what I consider "sane and reasonable wiring I can visually trace without heroics" is worth mentioning specifically.
>I'm just wondering how bad a typical solar install is, that what I consider "sane and reasonable wiring I can visually trace without heroics" is worth mentioning specifically.
Any neanderthal who's had the code beat into them can do the wiring just fine. I would be far more worried about "professionals" drilling holes in dumb shit to save 5min or mounting components in dumb places for convenience than I would be about them doing a bad job at connecting it all together with copper.
Any neanderthal who's had the code beat into them can do the wiring just fine. I would be far more worried about "professionals" drilling holes in dumb shit to save 5min or mounting components in dumb places for convenience than I would be about them doing a bad job at connecting it all together with copper.
I have no experience with solar installs but I wouldn't be surprised if crappy rooftop installs lead to leaks roofs. Happens all the time with satellite dishes.
This is one of many, many reasons I encourage people who have the land to do so, to do ground mounts. Zero chance of roof leaks that way, and the cost, even with the ground mounts, can actually end up being lower if you don't have a lot of shade. NEC 2017 requires per-panel electronics for shutdown on the roof, and there's no such requirement for ground mounts - so I just have 12 panel series strings going to a string inverter. There's no shade microinverters would help with (my two arrays shade each other a bit in the morning and evening).
>rightfully tell the inspector to F-off if they get uppity.
Thats not at all how that works. The inspector is guided by the code but 'because I want you to' is a valid reason for them to specify rework. There are all kinds of vagueness in the NEC, for example, that allow latitude over whether work well-crafted or not.
If an inspector is just plain wrong about a particular detail you can certainly appeal to the state authority but it's almost never done because it's more expense and delay than just making the install a little better.
Thats not at all how that works. The inspector is guided by the code but 'because I want you to' is a valid reason for them to specify rework. There are all kinds of vagueness in the NEC, for example, that allow latitude over whether work well-crafted or not.
If an inspector is just plain wrong about a particular detail you can certainly appeal to the state authority but it's almost never done because it's more expense and delay than just making the install a little better.
[deleted]
How do you know those mandatory inspections doesn't come from oil lobbyists trying to make solar more expensive than it has to be? You can always frame bad regulations to look reasonable.
>You can always frame bad regulations to look reasonable.
You can also frame good regulations to look unreasonable. Ultimately, you can't solve real-world problems by sitting in a chair and not doing any kind of observation. In this case, we know because there are actually problems with existing solar installations that we can point to. In the hypothetical you refer to, we could find out when news media interview an inspector who says "yeah we just rubber stamp everything, it's a scam" in nicer language.
You can also frame good regulations to look unreasonable. Ultimately, you can't solve real-world problems by sitting in a chair and not doing any kind of observation. In this case, we know because there are actually problems with existing solar installations that we can point to. In the hypothetical you refer to, we could find out when news media interview an inspector who says "yeah we just rubber stamp everything, it's a scam" in nicer language.
Because the same exact inspector shows up to inspect the electrical installation powered by oil?
Oil generators are much more dangerous than solar generators though due to monoxide and the extra fire risk from having tanks of gasoline sitting in your home, forcing the same level of inspection for both greatly favors oil. For solar all that should be required is a quick check that the box connecting it to the grid is there, the rest is just regular electrical wiring which typically doesn't need inspection if it is done by a licenced electrician.
Or, apparently USA requires inspection of all electrical installations. But where I live they don't do that you just need a licensed electrician during the installation, and I looked it up and home fires due to electricity are just as common in USA as here (about 1 electricity caused home fire per year per 7k people) so it seems like those inspections are worthless for preventing accidents.
Does USA has some way to evaluate whether all these regulations really are necessary and cut down on them over time? There seems to be so many strange regulations that fills no purpose there.
Or, apparently USA requires inspection of all electrical installations. But where I live they don't do that you just need a licensed electrician during the installation, and I looked it up and home fires due to electricity are just as common in USA as here (about 1 electricity caused home fire per year per 7k people) so it seems like those inspections are worthless for preventing accidents.
Does USA has some way to evaluate whether all these regulations really are necessary and cut down on them over time? There seems to be so many strange regulations that fills no purpose there.
The US doesn't require anything. As with most things in the US, building codes are not regulated at the federal level. But many states and municipalities inside of the US do require inspections for anything more than minor electrical work. It'll be different in every city.
The oil industry DGAF in this case (or any F they G is a rounding error compared to other parties). It's the electrician lobbying groups that want it because it's drives "their people" some additional amount of work.
My house was already inspected for the electrical installation currently powered by [mostly natural gas]. It would need additional inspections if I wanted to add grid-tie solar.
My house’s electrical was already inspected too. It still needed inspected again when I had maintenance done on the system.
The inspection is because electrical systems can burn houses down if they’re not installed correctly.
It has nothing to do with the source of the energy at the other end of the wire.
The inspection is because electrical systems can burn houses down if they’re not installed correctly.
It has nothing to do with the source of the energy at the other end of the wire.
Sure, but if your house already had grid-tie solar and you wanted to add a natural gas generator, you'd need the same kind of inspections.
Which happens to be substantially the reason I don't have a natural gas standby generator (in this case, the gatekeeping/protectionism of electricians by my state, as enforced at the end by the permitting process).
Your tinfoil is leaking.
Eh, if that were really true, then they wouldn't inspect homeowner work. Their primary concern is that code was met. The municipality wants this because code is supposed to reduce the risk of destructive failures (fire, gas leak, flood, etc) that could affect the neighbors.
And effect future renters, people at a house party, sleepover guests, etc. who aren't going to inspect the gas line themselves.
None of ours climbed on the roof or looked in the attic. If there were major issues up there, they wouldn't have seen them.
Solar energy comes up often on HN, but it is misleading to talk about solar without differentiating between utility grid solar and consumer rooftop solar. Simply put, utility grid solar provides low cost power and consumer rooftop solar does not. The rooftop solar price is hidden because no power source has been as subsidized as rooftop solar. Besides direct subsidies, wealthier home owners are often paid the retail rate for the electricity they sell to the grid which causes higher electricity bills for those who can't afford to put panels on their roof - sort of a reverse Robinhood scheme.
You can see the cost differences here: https://www.lazard.com/perspective/levelized-cost-of-energy-...
Rooftops are unused space, but the land use is generally a small part of the cost. Utility scale solar will always have economies of scale compared to one-off small installations on someone's roof. A dollar spent on roof-top solar would be MUCH better spent on solar panels installed on the ground by the utility.
I am really not sure what to make of anyone who supports the huge subsidies to make rooftop solar viable and then talks about the low cost of solar.
You can see the cost differences here: https://www.lazard.com/perspective/levelized-cost-of-energy-...
Rooftops are unused space, but the land use is generally a small part of the cost. Utility scale solar will always have economies of scale compared to one-off small installations on someone's roof. A dollar spent on roof-top solar would be MUCH better spent on solar panels installed on the ground by the utility.
I am really not sure what to make of anyone who supports the huge subsidies to make rooftop solar viable and then talks about the low cost of solar.
A proverb "The best is the enemy of the good (enough)". I have control over my ability to deploy rooftop solar. I have little to zero influence with my utility company to promote deployment of utility grid solar.
Utility solar just means the utility company can soak up more profits. Every single person with whom I've discussed rooftop solar has not regretted getting it, and complete ROI is measured in years, not decades.
Rooftop solar = energy independence. That means a lot to me.
Utility solar just means the utility company can soak up more profits. Every single person with whom I've discussed rooftop solar has not regretted getting it, and complete ROI is measured in years, not decades.
Rooftop solar = energy independence. That means a lot to me.
>Utility solar just means the utility company can soak up more profits.
Utilities are generally considered natural monopolies and their rates are regulated. If there are higher costs because they have to literally buy power at the retail rate from a consumer with rooftop solar, they will have to raise the rates for those who can't afford to put in solar.
>...Every single person with whom I've discussed rooftop solar has not regretted getting it, and complete ROI is measured in years, not decades.
Yes, they haven't regretted it because the costs are being subsidized by tax payers and the less well off rate payers. It isn't very surprising that those who receive money are happy to receive it. In CA, the PUC was going to lower the credit paid to solar owners for sending electricity to the grid to 5 cents a KW and the uproar from wealthy people was large enough that the plan was put on hold. The 5 cents is still more than the 3 cents it costs PG&E for nuclear power, but if the change was implemented, "...The manufacturers of solar systems predicted the death of solar in California,". While I can understand that those who benefit from these huge subsidies would prefer they remain, this is not good public policy.
https://www.ocregister.com/2022/04/29/ghosted-by-the-puc-fol...
Utilities are generally considered natural monopolies and their rates are regulated. If there are higher costs because they have to literally buy power at the retail rate from a consumer with rooftop solar, they will have to raise the rates for those who can't afford to put in solar.
>...Every single person with whom I've discussed rooftop solar has not regretted getting it, and complete ROI is measured in years, not decades.
Yes, they haven't regretted it because the costs are being subsidized by tax payers and the less well off rate payers. It isn't very surprising that those who receive money are happy to receive it. In CA, the PUC was going to lower the credit paid to solar owners for sending electricity to the grid to 5 cents a KW and the uproar from wealthy people was large enough that the plan was put on hold. The 5 cents is still more than the 3 cents it costs PG&E for nuclear power, but if the change was implemented, "...The manufacturers of solar systems predicted the death of solar in California,". While I can understand that those who benefit from these huge subsidies would prefer they remain, this is not good public policy.
https://www.ocregister.com/2022/04/29/ghosted-by-the-puc-fol...
You are positing a zero-sum game between utility solar and rooftop solar. This is not the case. States (and the USG) subsidize fossil fuels to the tune of 10x what they subsidize solar. All energy sources require subsidies, but the solar subsidy is one of the lowest.
PUC rates going down for solar buyback will do nothing for the non-solar users. The fact that (some states') utility companies are regulated doesn't mean the regulation is protected from regulatory capture.
The utilities are not non-profits, they don't behave like them and have their plants on PUC boards everywhere.
PUC rates going down for solar buyback will do nothing for the non-solar users. The fact that (some states') utility companies are regulated doesn't mean the regulation is protected from regulatory capture.
The utilities are not non-profits, they don't behave like them and have their plants on PUC boards everywhere.
>You are positing a zero-sum game between utility solar and rooftop solar.
Consumer rooftop solar is the most expensive way ever thought of to provide electrical power. Money is fungible. A dollar tied up in building a one-off consumer solar is exactly a dollar unavailable for building out utility grade solar which can be done at a fraction of the cost.
>States (and the USG) subsidize fossil fuels to the tune of 10x what they subsidize solar. All energy sources require subsidies, but the solar subsidy is one of the lowest.
There is no need to change the subject. We are talking about utility grade solar and consumer rooftop solar.
>…PUC rates going down for solar buyback will do nothing for the non-solar users. The fact that (some states') utility companies are regulated doesn't mean the regulation is protected from regulatory capture.
All states have a public utility commission. The fact that states heavily subsidize power generation by consumers means that those without solar have to have increased rates. As an example, at the current time, non-solar households in CA pay an estimated extra $115 to $245 per year to cover the subsidies given to their wealthier neighbors. It is estimated that as the number of consumer solar installation increase, that increased cost will grow to between $385 and $550 per year by 2030 for less wealthy households to cover the costs of wealthier households. I can understand why those getting the subsidy like it, but that doesn't make it good public policy.
That "energy independence" that you say means a great deal to you is totally dependent on the grid to provide electricity to you at night or when the sun doesn't happen to be shining. In many places the costs to maintain that grid are comparable to the costs of providing the actual electricity.
Why is it fair for consumer solar households to use the grid but not pay their fair share of the costs? Why should the utility have to electricity from them at up to 10 times the price paid to commercial providers of electricity?
Consumer rooftop solar is the most expensive way ever thought of to provide electrical power. Money is fungible. A dollar tied up in building a one-off consumer solar is exactly a dollar unavailable for building out utility grade solar which can be done at a fraction of the cost.
>States (and the USG) subsidize fossil fuels to the tune of 10x what they subsidize solar. All energy sources require subsidies, but the solar subsidy is one of the lowest.
There is no need to change the subject. We are talking about utility grade solar and consumer rooftop solar.
>…PUC rates going down for solar buyback will do nothing for the non-solar users. The fact that (some states') utility companies are regulated doesn't mean the regulation is protected from regulatory capture.
All states have a public utility commission. The fact that states heavily subsidize power generation by consumers means that those without solar have to have increased rates. As an example, at the current time, non-solar households in CA pay an estimated extra $115 to $245 per year to cover the subsidies given to their wealthier neighbors. It is estimated that as the number of consumer solar installation increase, that increased cost will grow to between $385 and $550 per year by 2030 for less wealthy households to cover the costs of wealthier households. I can understand why those getting the subsidy like it, but that doesn't make it good public policy.
That "energy independence" that you say means a great deal to you is totally dependent on the grid to provide electricity to you at night or when the sun doesn't happen to be shining. In many places the costs to maintain that grid are comparable to the costs of providing the actual electricity.
Why is it fair for consumer solar households to use the grid but not pay their fair share of the costs? Why should the utility have to electricity from them at up to 10 times the price paid to commercial providers of electricity?
[deleted]
I see this argument made more and more, as all the other arguments against solar are proved beyond doubt to have been total nonsense.
It's still not true though. For starters "expensive" rooftop solar costs roughly the same as nuclear, which means it's part of the solution, not the problem.
Distributed solar (and batteries) are useful to the grid. It simply makes economic sense to share some of the economic benefits with the people doing the work. The homeowner pays the installer, and then gets payed back over time as they deliver energy to the grid for use by their local area.
The key savings for the grid are around lowering the peak demands on the grid transmission lines.
There's plenty of documentation on this. People have calculated exactly how much benefit was provided by the rooftop solar and it's regularly shown to have had positive externalities beyond what the homeowner got paid.
Though, most of that is for times in the past, when federal incentives may have been overriding local utility attempts to protect their profit margins and most solar was retrofits. And solar generally was in it's infancy and needed subsidized because we didn't have a carbon tax.
Today, the key thing is to be buliding net-zero housing, which generally involves adding solar PV (and insulation) at the design and construction phase. Which basically removes all the costs and is saving money from the start. We can also not hook up gas at all, for a massive saving on new construction, plus health and climate benefits.
https://www.cpuc.ca.gov/industries-and-topics/electrical-ene...
> All new residential construction will be zero net energy (ZNE) by 2020. > All new commercial construction will be ZNE by 2030 > 50% of commercial buildings will be retrofit to ZNE by 2030 > 50% of new major renovations of state buildings will be ZNE by 2025.
Meanwhile, rooftop solar on commercial buildings, was always cheaper than residential (so cheaper than nuclear for example) due to scale and still makes sense for the same reasons, large commercial bulidings use energy, and using it locally is cheaper than transmitting it.
So rooftop solar is good. Subsidies to make markets work better are good. (I'd prefer that the subsidies given to the fossil fuel industries were removed, but if that's not politically viable, I'm happy with counterbalancing subsidies).
It's still not true though. For starters "expensive" rooftop solar costs roughly the same as nuclear, which means it's part of the solution, not the problem.
Distributed solar (and batteries) are useful to the grid. It simply makes economic sense to share some of the economic benefits with the people doing the work. The homeowner pays the installer, and then gets payed back over time as they deliver energy to the grid for use by their local area.
The key savings for the grid are around lowering the peak demands on the grid transmission lines.
There's plenty of documentation on this. People have calculated exactly how much benefit was provided by the rooftop solar and it's regularly shown to have had positive externalities beyond what the homeowner got paid.
Though, most of that is for times in the past, when federal incentives may have been overriding local utility attempts to protect their profit margins and most solar was retrofits. And solar generally was in it's infancy and needed subsidized because we didn't have a carbon tax.
Today, the key thing is to be buliding net-zero housing, which generally involves adding solar PV (and insulation) at the design and construction phase. Which basically removes all the costs and is saving money from the start. We can also not hook up gas at all, for a massive saving on new construction, plus health and climate benefits.
https://www.cpuc.ca.gov/industries-and-topics/electrical-ene...
> All new residential construction will be zero net energy (ZNE) by 2020. > All new commercial construction will be ZNE by 2030 > 50% of commercial buildings will be retrofit to ZNE by 2030 > 50% of new major renovations of state buildings will be ZNE by 2025.
Meanwhile, rooftop solar on commercial buildings, was always cheaper than residential (so cheaper than nuclear for example) due to scale and still makes sense for the same reasons, large commercial bulidings use energy, and using it locally is cheaper than transmitting it.
So rooftop solar is good. Subsidies to make markets work better are good. (I'd prefer that the subsidies given to the fossil fuel industries were removed, but if that's not politically viable, I'm happy with counterbalancing subsidies).
>I see this argument made more and more, as all the other arguments against solar are proved beyond doubt to have been total nonsense.
I see this logical fallacy made more and more where people start out by begging the question. No need to prove anything when everyone should just assume you are 100% right on everything!
>...For starters "expensive" rooftop solar costs roughly the same as nuclear, which means it's part of the solution, not the problem.
Tell that to Germany! (or a fair number of the people on this site).
>...Distributed solar (and batteries) are useful to the grid. It simply makes economic sense to share some of the economic benefits with the people doing the work. The homeowner pays the installer, and then gets payed back over time as they deliver energy to the grid for use by their local area.
In places like CA, a consumer installs solar cells, gets the federal tax credit and can then sell their power back to the utility for the retail rate (around 30 cents per KWH). A commercial entity that installs solar cells can maybe sell their power back at 1/10 that rate. In order to subsidize the wealthy home owner, rates for the less wealthy households had to increase. As an example, at the current time, non-solar households in CA pay an estimated extra $115 to $245 per year to cover the subsidies given to their wealthier neighbors. It is estimated that as the number of consumer solar installation increase, that increased cost will grow to between $385 and $550 per year by 2030 for less wealthy households to cover the costs of wealthier households. I can understand why those getting the subsidy like it, but that doesn't make it good public policy.
>So rooftop solar is good.
It is a bit silly to just say something is 'good'. We need to compare it with its alternatives. The direct alternative is ground based solar. Consumer rooftop solar is much more hazardous to the installers and much more expensive - I don't think either of those two statements is in doubt. In order to hide the cost of consumer rooftop solar, there are tax credits and often those who can't afford solar are forced to subsidize the costs for their wealthier neighbors.
>Subsidies to make markets work better are good.
Subsidies to take money from the poor to give to the wealthy are not good public policy. In CA, the PUC proposed lowering the credit paid to solar owners for sending electricity to the grid to 5 cents a KW and the uproar from wealthy people was large enough that the plan was put on hold. The 5 cents is still more than the 3 cents it costs PG&E for nuclear power, but if the change was implemented, "...The manufacturers of solar systems predicted the death of solar in California,". While I can understand that those who benefit from these huge subsidies would prefer they remain, this is not good public policy.
I see this logical fallacy made more and more where people start out by begging the question. No need to prove anything when everyone should just assume you are 100% right on everything!
>...For starters "expensive" rooftop solar costs roughly the same as nuclear, which means it's part of the solution, not the problem.
Tell that to Germany! (or a fair number of the people on this site).
>...Distributed solar (and batteries) are useful to the grid. It simply makes economic sense to share some of the economic benefits with the people doing the work. The homeowner pays the installer, and then gets payed back over time as they deliver energy to the grid for use by their local area.
In places like CA, a consumer installs solar cells, gets the federal tax credit and can then sell their power back to the utility for the retail rate (around 30 cents per KWH). A commercial entity that installs solar cells can maybe sell their power back at 1/10 that rate. In order to subsidize the wealthy home owner, rates for the less wealthy households had to increase. As an example, at the current time, non-solar households in CA pay an estimated extra $115 to $245 per year to cover the subsidies given to their wealthier neighbors. It is estimated that as the number of consumer solar installation increase, that increased cost will grow to between $385 and $550 per year by 2030 for less wealthy households to cover the costs of wealthier households. I can understand why those getting the subsidy like it, but that doesn't make it good public policy.
>So rooftop solar is good.
It is a bit silly to just say something is 'good'. We need to compare it with its alternatives. The direct alternative is ground based solar. Consumer rooftop solar is much more hazardous to the installers and much more expensive - I don't think either of those two statements is in doubt. In order to hide the cost of consumer rooftop solar, there are tax credits and often those who can't afford solar are forced to subsidize the costs for their wealthier neighbors.
>Subsidies to make markets work better are good.
Subsidies to take money from the poor to give to the wealthy are not good public policy. In CA, the PUC proposed lowering the credit paid to solar owners for sending electricity to the grid to 5 cents a KW and the uproar from wealthy people was large enough that the plan was put on hold. The 5 cents is still more than the 3 cents it costs PG&E for nuclear power, but if the change was implemented, "...The manufacturers of solar systems predicted the death of solar in California,". While I can understand that those who benefit from these huge subsidies would prefer they remain, this is not good public policy.
Kinda funny the typical order is ev > solar > batteries, while it should opposite!
Not a single comment here on the macrodynamics of corruption - petroleum industry does NOT want a major shift to solar, as that would imply cheaper (or free) gas for your (now electric) vehicle.
Cheap/free fuel is an existential threat to their business model. The fact that fossil fuel is a major contributor to climate change is glossed over as long as the $$ roll in.
Their end game is to make it impossible for us to transition to another energy source until they have wrung every possible last cent from this one.
Thus, tariffs on solar, attacks on EV adoption, and demonization of nuclear are clearly things that have worked wonders for their bottom line.
Cheap/free fuel is an existential threat to their business model. The fact that fossil fuel is a major contributor to climate change is glossed over as long as the $$ roll in.
Their end game is to make it impossible for us to transition to another energy source until they have wrung every possible last cent from this one.
Thus, tariffs on solar, attacks on EV adoption, and demonization of nuclear are clearly things that have worked wonders for their bottom line.
So aside from just a bog-standard complaint about big oil we can find anywhere (but that I’m sure felt very cathartic to type), do you have any sources that link high solar energy costs to the petroleum industry?
I've been looking a bit at solar systems, and it seems common in the US for half the price of the install to be labor. So $20K of labor on a $40K system. That seems awfully excessive for the tasks of installing rails on the roof, clipping panels into it, and the electrical work (though copper is insanely expensive right now, a panel upgrade is around $4500, so the electrical work can add up).
Am I way out of line here, or are the labor prices reasonable?
Am I way out of line here, or are the labor prices reasonable?
Residential solar installation in the US has become infested with scummy business practices. It's nearly on the level of traveling roofing companies. I don't think you're out of line. Get a couple of quotes and you'll see a huge spread for the same quality of components, installed.
Yeah, I looked into financing a solar installation.
They offered a 25 year loan term, 0% interest, including the cost of a new roof.
But... The installed cost of a 7kW system with no batteries was over $5.68/Watt NOT INCLUDING THE ROOF!
So... financially the deal was actually objectively better than doing nothing because it increased monthly cash flow and required no money down. But, the solar company would be getting most of the savings from the system and would pass on about $50-80/month of those savings to me, but we'd be paying $200/month forever.
They offered a 25 year loan term, 0% interest, including the cost of a new roof.
But... The installed cost of a 7kW system with no batteries was over $5.68/Watt NOT INCLUDING THE ROOF!
So... financially the deal was actually objectively better than doing nothing because it increased monthly cash flow and required no money down. But, the solar company would be getting most of the savings from the system and would pass on about $50-80/month of those savings to me, but we'd be paying $200/month forever.
The rent is too damn high.
It pushes up the cost of labor across the board.
It pushes up the cost of labor across the board.
> Am I way out of line here, or are the labor prices reasonable?
Are there more than a handful of independent sellers to choose from? If there are, and you are not willing to do the work yourself, then I would say the prices are reasonable.
Are there more than a handful of independent sellers to choose from? If there are, and you are not willing to do the work yourself, then I would say the prices are reasonable.
Apart of the labor, I am in the EU and in the offer I have got, the mounting for one panel (some weak metal parts) is the same as the costs of the panel itself.
I find this a bit crazy given that all these panels will have the same angle and are mounted in a row.
So instead of individual ones I can just weld two long pieces in a fixed angle and screw them on. And get the double amount of panels for the same price...
It also depends on your roof material- if it's flat, couple of extrusions to support corners of the panels is less material than full length extrusions.
When I shopped around for components, the prices did range from ~20-30EUR per panel to ~100EUR/panel.
When I shopped around for components, the prices did range from ~20-30EUR per panel to ~100EUR/panel.
Why are you grouping everything electrical under labor costs, if it includes things like expensive copper wiring and a $4500 electric panel?
I wasn't, I'm including panel and wiring under materials cost, but some component of the $4500 panel replacement will be labor. Panels cost around $250, but then you need to upgrade the meter base, add an external disconnect (now code), upgrade ~5ft of aluminum from meter base to panel) and then swing over and reconnect all the circuits (high labor). There's also a city component for service upgrade. Then there's the components related to the solar grid tie.
I understand that how I initially phrased it sounded like maybe I was bundling that into labor.
I understand that how I initially phrased it sounded like maybe I was bundling that into labor.
You're not just paying for the time they work. It's also stuff like paying for medical care if they fall off the roof or call backs on warranty work.
Plus a lot of it is marketing and quoting expense. Advertising and paying for referrals eats up a big chunk of the bill. You (or someone) has to spend time generating quotes that turn into projects less than half the time.
Plus a lot of it is marketing and quoting expense. Advertising and paying for referrals eats up a big chunk of the bill. You (or someone) has to spend time generating quotes that turn into projects less than half the time.
Yeah, like real estate agents, where a huge amount of the work is just trying to find new people to handle a house sale for, rather than any sort of productive work on selling houses, and the useful:useless work ratio gets worse as there are more agents out there.
I’d much rather just pay an engineer $1,000 to whip up some plans, and then hire people to follow those plans, rather than pay indirectly for a bunch of failed sales calls. Which is what I’m ending up doing.
I’d much rather just pay an engineer $1,000 to whip up some plans, and then hire people to follow those plans, rather than pay indirectly for a bunch of failed sales calls. Which is what I’m ending up doing.
That seems a bit expensive. Is that a very large system?
Installing a (small) system to start with in the Netherlands costs down to an OOM less.
Installing a (small) system to start with in the Netherlands costs down to an OOM less.
Have you tried any of these tasks yourself?
Edit: IIUC, it's usually a 2-5 person job. And it rarely takes more than a day.
IIUC, the actual laborers aren't making anywhere near ~$20k per day (even for 5 people).
Overhead on labor should not be 2000%+.
If laborers were capturing all of the "labor" cost - they'd be making $1M per year working 5 days per week. Obviously, they wouldn't be 100% booked.
But they're probably not even averaging $100k - since electricians make less than that in most parts of the country, and most of the workers are making a lot less than the electrician.
The actual "labor" cost here - even counting for vacation and other benefits - is probably less than $5k. What's the other $15k?
It's certainly NOT profit. These companies don't have high margins.
It's also not materials - that's broken out into the materials costs which includes the more expensive regulated grid-tie inverters and whatnot.
Whatever it is - it appears to be unique to the US.
IIUC, the actual laborers aren't making anywhere near ~$20k per day (even for 5 people).
Overhead on labor should not be 2000%+.
If laborers were capturing all of the "labor" cost - they'd be making $1M per year working 5 days per week. Obviously, they wouldn't be 100% booked.
But they're probably not even averaging $100k - since electricians make less than that in most parts of the country, and most of the workers are making a lot less than the electrician.
The actual "labor" cost here - even counting for vacation and other benefits - is probably less than $5k. What's the other $15k?
It's certainly NOT profit. These companies don't have high margins.
It's also not materials - that's broken out into the materials costs which includes the more expensive regulated grid-tie inverters and whatnot.
Whatever it is - it appears to be unique to the US.
Eh... installing panels solo can be done, but especially on a roof, shouldn't be done. It's far, far easier with two people, even for ground mount systems. Three is some benefit over two, beyond that people are just standing around unless you're able to install multiple strings at once.
You are missing cost of materials, insurance, licensing, back office staff, marketing, cushion for slow months, opportunity cost, maybe franchise fees, training, etc. Basically all the costs of running a business. You don't just throw a few laborers on a roof and call it a day. I don't know the actual overhead on a solar install, but if a contractors markup too large they'll lose out to the competition fairly quickly.
My 48 panel installation had 5 guys on the roof and 2 electricians.
Similar with my install. Also consider the big tax benefit. Everyone pushes their prices up marketing the tax rebate. Plus we had issues and our whole inverter and battery system was replaced under warranty.
10 panels and was done by 5 guys, two of which were electricians. Total labor was $1.3k and they did an awesome job. Then again, this is in South Africa!
Considering GDP per capita is ~12.6 times higher in the US - that's probably equivalent to ~$16k in US labor costs (80%).
Not those exact tasks, but I've upgraded roof venting and the associated shingle repair/tar work, which I assume is similar to what you'd be doing for the panel mounting rail installs, and I've run $500+ worth of 12-2 Romex to replace old aluminum runs, and do electrical upgrades to get some down-to-studs remodel work up to current standards.
And how much would you charge to do that day after day? If I were quoting a price, I would also include the cost of long term disability insurance premiums due to the hazardous nature of the work.
You can hand wring about safety and disability all you want but the fact of the mater is that roofing has all of the same risks and none of the sky high prices so clearly it's not the "schlepping around unwieldy crap on a roof" that's driving the cost.
That’s where the profit is budgeted
Labor prices in the US are silly high. I’m paying the plumber like $160/hr which is a joke in my opinion.
I would consider that well worth the price for not having to deal with human waste transport issues! And that's because I have actually done that work myself a few times.
But yes, I know not all plumbing issues are waste related.
But yes, I know not all plumbing issues are waste related.
Been running new PEX supply lines to replace the leaking galvanized ones and it's been surprisingly easy.
Everything is easy, until you do it wrong and flood your house causing $15k in damages.
Serious question, what would be your hourly rate to do the work yourself?
That's a really hard question to answer. I'm getting towards the end of a to-studs bathroom remodel, and it's taking an amazing amount of time, probably 300 hours. But, if I hired it all out it could easily have been $25K to be done to a similar standard. I'll have around $5K in materials in when I'm done. But I also know that if I hired it all out, there are a number of things I've done that wouldn't have been done, for example I ran 500 feet of 12-2 romex to replace current several current 12-2 aluminum runs, switched our bedrooms over to AFCI, ran several spare 12-2 runs for future renovation, removed a totally not to code wiring situation that was a fire waiting to happen...
And on top of it, I gain experience and get to know my house inside out... But on the other hand, I haven't had a spare weekend for 6 months.
So how do you value that on a per hour basis?
And on top of it, I gain experience and get to know my house inside out... But on the other hand, I haven't had a spare weekend for 6 months.
So how do you value that on a per hour basis?
I'm not sure either, I'm also in the middle of a fairly extensive remodel (first floor of the house basically down to studs, most flooring ripped out, changing kitchen layout).
Some things seem within the scope of somebody like myself (who doesn't do this as a day job). For instance, I'm comfortable with removing and replacing toilets, I can do basic drywall work, I can texture and paint and do backsplash. But I don't think I could redo hardwood and tile flooring myself, install an exterior sliding door, nor make cabinet faces that I'd be happy with. For that, I'd pay whatever a contractor calls Market Rate^tm.
I expect to not have any free weekends for at least the rest of the year. What would I pay for that? Maybe... $25-$30k?
Some things seem within the scope of somebody like myself (who doesn't do this as a day job). For instance, I'm comfortable with removing and replacing toilets, I can do basic drywall work, I can texture and paint and do backsplash. But I don't think I could redo hardwood and tile flooring myself, install an exterior sliding door, nor make cabinet faces that I'd be happy with. For that, I'd pay whatever a contractor calls Market Rate^tm.
I expect to not have any free weekends for at least the rest of the year. What would I pay for that? Maybe... $25-$30k?
When I did my kitchen + dining room remodel a few years ago, I ended up bringing someone in to finish the oak I put in, and refinish the rest of the oak in the living room (they were connected). I don't think I could do it in the 2 days they did, and I'd be almost certainly making a bigger mess (they had a sander with vacuum, truck mounted IIRC). I've also paid someone to replace our doors and windows.
Tile I didn't find so bad, with the exception that in the kitchen I did 8x48" tiles which I thought would make the job go faster, but they were a nightmare to set. The large format was just hard. The backsplash subway tile went super easy.
Tile I didn't find so bad, with the exception that in the kitchen I did 8x48" tiles which I thought would make the job go faster, but they were a nightmare to set. The large format was just hard. The backsplash subway tile went super easy.
If it helps, I've done hardwood floors and tile but have a hard time with drywall and texturing. For the hardwood, I just needed someone who had done it before (my brother) to show me one time.
Unless you're a licensed electrician, that electrical work you did yourself is in violation of building codes and you'll need to pay an electrician to approve the work or you'll have difficulty selling your house.
This is probably not true, and it's at least not true for any of the places I've lived on the west coast. As long as an inspector signs off on it (which they have to do regardless of if you do the work or if an electrician does it), and it's found to be up to code, it's fine.
In many areas of the US, it’s perfectly legal to do your own residential electrical work, so long as you get the permits and inspections.
I didn't say it was illegal, I said he would have difficulty selling his house due to the electrical work performed by someone who isn't a licensed electrician.
It wouldn't have mattered in the seller's market of the past few years, but it will absolutely be a dealbreaker now that we're entering into a buyer's market.
It wouldn't have mattered in the seller's market of the past few years, but it will absolutely be a dealbreaker now that we're entering into a buyer's market.
This is not true.
Permitted and inspected work is fine.
Permitted and inspected work is fine.
YMMV but this is absolutely not true in my case. I have building inspections filed with the city to back that assertion up. Our local building office is actually quite good to work with as a DIYer.
It makes sense really, it's better to work with DIYers to "backstop" their work by having an inspector look at their work and not be an A-hole about it, than to have them do the work anyway and cross their fingers. I love having the building inspectors check my work, worth the couple hundred bucks I pay for a permit.
It makes sense really, it's better to work with DIYers to "backstop" their work by having an inspector look at their work and not be an A-hole about it, than to have them do the work anyway and cross their fingers. I love having the building inspectors check my work, worth the couple hundred bucks I pay for a permit.
My state doesn't license electricians at all and leaves it up to local governments to decide whether they want to require any sort of local license to be an electrician.
I've never done electrical work myself but I've hired electricians and as far as I can tell there is no licensing requirement in my local jurisdiction nor any sort of local license to be an electrician.
I've never done electrical work myself but I've hired electricians and as far as I can tell there is no licensing requirement in my local jurisdiction nor any sort of local license to be an electrician.
Nobody is comparing outlet locations to a building plan at the time of sale.
Well, unless the house catches on fire after the sale and someone comes to sue you for improper disclosure.
That's assuming the install was in some way at fault, the faulty install causus a fire, the cause was determined, and the cause was traced back to me.
Im more worried about being hit by a meteor.
Im more worried about being hit by a meteor.
My employer charges $300/hr for development work and I sit at a desk all day never touching sewage.
Which is the bigger joke?
Which is the bigger joke?
The sucker paying your employer $300/hr!
No one pays $300/hr for dev work unless they’re idiots.
It's a pretty normal rate for domain-specific expertise within agencies. This isn't a special situation either, I've worked for multiple agencies that charge rates like this... some with thousands of employees.
There are a lot of idiots, apparently. Many of them working at Fortune 500s.
There are a lot of idiots, apparently. Many of them working at Fortune 500s.
That's cheap.
Biglaw bills 2k an hour for a junior associate (basically checking if all the commas on your contract are in place)
Biglaw bills 2k an hour for a junior associate (basically checking if all the commas on your contract are in place)
$2k/hr is high for biglaw partners. Associates are starting at ~$600/hr and going up to $1,000 for senior associates: https://abovethelaw.com/2020/05/biglaw-firms-are-charging-ho...
Of course, that's in a different world than 90% of lawyers where they'll start at the $200–$300/hr range: https://old.reddit.com/r/LawFirm/comments/m710ce/junior_asso...
(Of course, associates aren't seeing 90% of the money they bill.)
Of course, that's in a different world than 90% of lawyers where they'll start at the $200–$300/hr range: https://old.reddit.com/r/LawFirm/comments/m710ce/junior_asso...
(Of course, associates aren't seeing 90% of the money they bill.)
Yup. I'm all for paying fair wages and understand the overhead of travel time and idle time for small jobs, but still, $160/hr is way too much.
It isn't too much because that's what the market will bear. Why would anyone work for less than their market rate?
I mean, the backpressure to what the market will bear is people thinking something costs too much.
If it is too much, why are you not doing it yourself?
I do do things myself until either A) the likelihood and costs of me screwing it up and having to do it over cross some threshold B) the time commitment seems unreasonable or C) it really doesn't interest me. Edit: or D) I'm convinced they could do a significantly better job than me
Like sometimes I pay somebody to clean and fold all of my laundry or to deep clean parts of my home because getting those things out of the way and freeing up a chunk of my time without that overhead is quite helpful when I've got too much going on. Similarly sometimes I pay to get the oil changed in my car. Not buying the service really, but buying the time that it saves me.
Like sometimes I pay somebody to clean and fold all of my laundry or to deep clean parts of my home because getting those things out of the way and freeing up a chunk of my time without that overhead is quite helpful when I've got too much going on. Similarly sometimes I pay to get the oil changed in my car. Not buying the service really, but buying the time that it saves me.
I guess my comment was actually a reply to bergenty , who by the very act of paying $160/hour to their plumber indicated $160/hour is not too much.
No one is stopping someone from doing the plumbing work themself, there are lots of people selling plumbing labor, and the barrier to entry to becoming a plumber is not super high. So whatever the going price simply reflects the supply of people willing to do plumbing work.
I think it is fantastic that plumbers are getting $160/hour to do backbreaking and hazardous work that most people would rather not do.
No one is stopping someone from doing the plumbing work themself, there are lots of people selling plumbing labor, and the barrier to entry to becoming a plumber is not super high. So whatever the going price simply reflects the supply of people willing to do plumbing work.
I think it is fantastic that plumbers are getting $160/hour to do backbreaking and hazardous work that most people would rather not do.
Another factor for me is how much damage is it going to do to my body. For example, concrete removal is better done by someone with an excavator rather than me with a jackhammer.
> Another factor for me is how much damage is it going to do to my body.
That's a very good point. Some trades tend to be riskier than others but they all induce wear and tear on the body over time.
That's a very good point. Some trades tend to be riskier than others but they all induce wear and tear on the body over time.
[deleted]
Because I don’t want to or don’t have the time? It still doesn’t justify the insane hourly cost.
If you have a better way to justify prices than supply and demand curves intersecting in markets where there is no barrier to entry or other manipulation, I would be interested to know.
Corollary would be, if you earn income, how are you justifying your price(s)?
Corollary would be, if you earn income, how are you justifying your price(s)?
Yes it does. Does the law of supply and demand not make sense to you?
I got estimates to replace alternator for Mitsubishi Montero Sport in Seattle area for $330. It took 40 minutes to do it yourself, first time, while reading instructions, using only one wrench on a parking lot of apartment complex. If I had to do it again it would take me 15 minutes. $160/h for plumber work is very reasonable price compared to $600/h for mechanic work.
I once had a bad fan on my heat pump (bearings went bad). I went in to replace it, but none of the local motor suppliers, and nobody I could find online, could offer a replacement. It was a fancy 2 stage motor, I guess...
So I called the big plumbing/heating place in town. They came in with a $750 quote to replace it, but they said: "It's not currently failing, but when we're in there it's usually a good idea to replace the contactors." I asked how much that would be. He looks up in a table "$375". "For a relay?!?" I later looked up the contactor price and it was less than $20, and it'd take me less than an hour to replace it, maybe 5 minutes "while I was in there".
So I called the big plumbing/heating place in town. They came in with a $750 quote to replace it, but they said: "It's not currently failing, but when we're in there it's usually a good idea to replace the contactors." I asked how much that would be. He looks up in a table "$375". "For a relay?!?" I later looked up the contactor price and it was less than $20, and it'd take me less than an hour to replace it, maybe 5 minutes "while I was in there".
And you completely underestimate people's ability to screw that up.
Mechanics tend to have a book that tell them what rate to charge and how long it should take. Then when you add in being in the Seattle area, that their taxes and property costs are off the hook because of all the computer programmers that happen to live in Seattle, earn well into the 6 figures, and post on HN, that their prices are not bad for people that don't want to turn a wrench.
Mechanics tend to have a book that tell them what rate to charge and how long it should take. Then when you add in being in the Seattle area, that their taxes and property costs are off the hook because of all the computer programmers that happen to live in Seattle, earn well into the 6 figures, and post on HN, that their prices are not bad for people that don't want to turn a wrench.
The book is used for warranty work. When you are paying customer you will not be charged by book time, but multiple of that.
You're paying $330 for an alternator because you're competing for the mechanic's time with someone who's head has been pumped full of "but what if a wheel falls off, better leave it to a professional" rhetoric and who has enough money from his FAANG RSUs to entertain the idea spending $200 on a 20min pad slap brake job.
[deleted]
Labor prices are high because there is a shortage of people willing to do the work at lower rates. The US labor market is very tight, doubly so if you are in a high-COL area because those have even stronger growth.
There is a huge shortage of people in the trades and plumbers will charge what what the market can bear. Also plumbing and electrical are two things where if you do them wrong you can incur many thousands of dollars in damage very quickly. As a plumber you spend a lot of time "off the clock" - driving to houses, buying parts, doing paperwork, staying up to date on code. If they can't cover those expenses they can't be a plumber.
I've been working on how to bring the cost of solar down, at least for "homeowner installed DIY" systems in my area (legal, grid tie, permitted, inspected, etc), and I'm fairly certain the latest iteration of this will come in around the $1/W range, pre-incentives. That's without labor costs, just raw material and wire costs, but it's for a 21kW ground mount A-frame system with three string inverters, and a couple hundred foot of wire run through the ground between the panels and inverters.
I'm not sure how Australia does rapid shutdown (if they do), but Enphase and the requirement for per-panel shutdown devices on arrays in the US is responsible for a decent chunk of cost - somewhere on the order of $0.30/kWh. If you have lots of shading, microinverters are fine, but by NEC 2017, they're basically required (or you have to have per-panel optimizers and shutdown boxes, which add about the same cost as just going to microinverters). I don't know the exact details of it, but everyone I've talked to in the solar industry seems to feel Enphase "lobbied hard" for this particular shutdown requirement, because it's very much to their market advantage, even if it has no meaningful safety benefits in actual array failure conditions.
I hate to say "Because installers think they can get people to pay," but I've also seen a lot of "around the edges" evidence that the sales commissions for solar are fairly obscene (couple grand, if not more), just "tacked on" to the price. Hey, they're interested in solar, dial the commission up, and make it look like they'll save money! Even if the assumptions embedded are simply wrong.
And then, of course, there's the "solar loan" price inflation, in which your "0.99% APR" loan has a couple grand in fees up front, tacked onto the price. You can often save quite a bit by asking for the "cash price," but nobody does that out of the gate, because of course you want an expensive up front and low interest loan, right? Who wouldn't? Oh, and those loan origination fees count as install cost for the purposes of the tax credit... ;)
There are a lot of things that go into it, but from my point of view, it really feels like it's a lot of "Because we can, and because we convince people to pay it" going on with the installed costs. When I can get, as a random low volume homeowner, the equipment to do solar for $1-$1.25/W, I have to wonder about the prices installers charge.
I'm not sure how Australia does rapid shutdown (if they do), but Enphase and the requirement for per-panel shutdown devices on arrays in the US is responsible for a decent chunk of cost - somewhere on the order of $0.30/kWh. If you have lots of shading, microinverters are fine, but by NEC 2017, they're basically required (or you have to have per-panel optimizers and shutdown boxes, which add about the same cost as just going to microinverters). I don't know the exact details of it, but everyone I've talked to in the solar industry seems to feel Enphase "lobbied hard" for this particular shutdown requirement, because it's very much to their market advantage, even if it has no meaningful safety benefits in actual array failure conditions.
I hate to say "Because installers think they can get people to pay," but I've also seen a lot of "around the edges" evidence that the sales commissions for solar are fairly obscene (couple grand, if not more), just "tacked on" to the price. Hey, they're interested in solar, dial the commission up, and make it look like they'll save money! Even if the assumptions embedded are simply wrong.
And then, of course, there's the "solar loan" price inflation, in which your "0.99% APR" loan has a couple grand in fees up front, tacked onto the price. You can often save quite a bit by asking for the "cash price," but nobody does that out of the gate, because of course you want an expensive up front and low interest loan, right? Who wouldn't? Oh, and those loan origination fees count as install cost for the purposes of the tax credit... ;)
There are a lot of things that go into it, but from my point of view, it really feels like it's a lot of "Because we can, and because we convince people to pay it" going on with the installed costs. When I can get, as a random low volume homeowner, the equipment to do solar for $1-$1.25/W, I have to wonder about the prices installers charge.
> There are a lot of things that go into it, but from my point of view, it really feels like it's a lot of "Because we can, and because we convince people to pay it" going on with the installed costs.
I think this happens a lot with anything that’s relatively expensive. I mean let’s say you could get your 21kW system down to $8K installed. A lot of people just don’t have that kind of money laying around. But they’d be more than happy to finance $12K (so 50% markup) if the monthly payment comes out OK. So basically, anything expensive has a lot of room for “value add” in the form of making it “affordable.” Solar I think is never going to be so cheap that people will generally pay for it outright, so you’re going to see a lot of this.
I think this happens a lot with anything that’s relatively expensive. I mean let’s say you could get your 21kW system down to $8K installed. A lot of people just don’t have that kind of money laying around. But they’d be more than happy to finance $12K (so 50% markup) if the monthly payment comes out OK. So basically, anything expensive has a lot of room for “value add” in the form of making it “affordable.” Solar I think is never going to be so cheap that people will generally pay for it outright, so you’re going to see a lot of this.
> A lot of people just don’t have that kind of money laying around.
Probably because they approach finances in terms of the "monthly payment, I can afford it!" solution that's so profitable to lenders. Paying 50% more for the system "so I can get monthly payments" is not a way to having any actual savings, long term.
And when salestypes are playing games with the "dial-a-power-inflation-rate" knob to make your savings look amazing, it suckers some people in. Even as the power company is moving to change net metering requirements, very few salespeople seem to ever bother mentioning that you're unlikely to actually see 25 years of kWh for kWh net metering on a new install.
I don't run in particularly high income circles, but I do run in quite frugal circles, and the people I've been helping out with solar installs are, in fact, just buying things cash (after scrounging around for the best deals). I've been able to help this process some by facilitating some bulk purchases (the last order was 100x 72 cell panels, we ordered enough to be under $0.50/W on them), and I've traded some panels and other equipment for labor on various things as well ("I'll pay for the materials, pay you in inverters or something for the labor"), but... loans just aren't how any of the people I know out here (rural mountain west farm country) work.
Probably because they approach finances in terms of the "monthly payment, I can afford it!" solution that's so profitable to lenders. Paying 50% more for the system "so I can get monthly payments" is not a way to having any actual savings, long term.
And when salestypes are playing games with the "dial-a-power-inflation-rate" knob to make your savings look amazing, it suckers some people in. Even as the power company is moving to change net metering requirements, very few salespeople seem to ever bother mentioning that you're unlikely to actually see 25 years of kWh for kWh net metering on a new install.
I don't run in particularly high income circles, but I do run in quite frugal circles, and the people I've been helping out with solar installs are, in fact, just buying things cash (after scrounging around for the best deals). I've been able to help this process some by facilitating some bulk purchases (the last order was 100x 72 cell panels, we ordered enough to be under $0.50/W on them), and I've traded some panels and other equipment for labor on various things as well ("I'll pay for the materials, pay you in inverters or something for the labor"), but... loans just aren't how any of the people I know out here (rural mountain west farm country) work.
Then build a 'solar co-op', co-ops seem more popular in farming communities than cities. In sub-urban and more urban areas people don't tend to work together, hence take out loans on things like this.
Of course at the same time, you're assuming power prices go down, or even remain stable at their current price over time, which may or may not happen. In Texas our bills have jumped after the great freeze debacle.
Of course at the same time, you're assuming power prices go down, or even remain stable at their current price over time, which may or may not happen. In Texas our bills have jumped after the great freeze debacle.
I'm working on what that looks like in a few forms.
I'm not a licensed electrician, nor do I have the slightest desire to be one. But I do like helping people, who are capable of generally doing their own work, install dirt cheap grid tie solar ($1/W being the current target price). And I've got the cashflow to trade solar parts for other things without worrying too much about it (my deck railing is likely to be paid for with cash for materials, solar inverters for the labor).
So I'm trying to help optimize the design phase, and "Here's what it should look like, electrically." And, of course, nobody has said I can't help build the actual ground mount supports, or pull wire, or... generally help out.
I'm not a licensed electrician, nor do I have the slightest desire to be one. But I do like helping people, who are capable of generally doing their own work, install dirt cheap grid tie solar ($1/W being the current target price). And I've got the cashflow to trade solar parts for other things without worrying too much about it (my deck railing is likely to be paid for with cash for materials, solar inverters for the labor).
So I'm trying to help optimize the design phase, and "Here's what it should look like, electrically." And, of course, nobody has said I can't help build the actual ground mount supports, or pull wire, or... generally help out.
> $1/W range
That is similar to what you'd have to pay in Germany, up to the beginning of this year. My landlord installed 30 kW of panels and a 10 kWh battery storage for around 40 k€ including all fasteners, cables etc.
Installation can be done by yourself, although I think you'll have to use certified fasteners etc. for the insurance company. Connecting to the grid and checking everything once has to be done by a certified professional (electrician) once, which differs in price. Some only check systems they have installed (and therefore made money with) themselves, but that differs.
Prices have obviously gone up like nothing after Russia decided to fuck everything up.
That is similar to what you'd have to pay in Germany, up to the beginning of this year. My landlord installed 30 kW of panels and a 10 kWh battery storage for around 40 k€ including all fasteners, cables etc.
Installation can be done by yourself, although I think you'll have to use certified fasteners etc. for the insurance company. Connecting to the grid and checking everything once has to be done by a certified professional (electrician) once, which differs in price. Some only check systems they have installed (and therefore made money with) themselves, but that differs.
Prices have obviously gone up like nothing after Russia decided to fuck everything up.
I've been told that Australia also doesn't have domestic solar panel industry, which meant that solar panels made in China can be imported without tariff.
Installation cost for HVAC systems in US/Canada is also silly. In Asia, you walk into a department store and pick a system, and then pay 10~15% of the equipment price for installation. In the US, the cost of hardware is only 30% of the total quoted price and you will not get a price breakdown like you do at auto repair shops.
Installation cost for HVAC systems in US/Canada is also silly. In Asia, you walk into a department store and pick a system, and then pay 10~15% of the equipment price for installation. In the US, the cost of hardware is only 30% of the total quoted price and you will not get a price breakdown like you do at auto repair shops.
Asia::NA HVAC is kind of apples::oranges, right? Labor costs are different, home-use devices are different, etc.
On the other hand, how much of the purchase experience is driven by the consumer rather than the producer? HVAC is high capital and labor, low distribution volume. Why would a department store (if people still go to such things) devote space to it? Unlike various appliances (see discussion yesterday about decreases in quality driving increased purchase volume [0]), an HVAC is like roofing. Except for the thermostat and port covers everything is hidden and not part of a consumer aesthetic/emotional experience.
0. https://news.ycombinator.com/item?id=32462954
On the other hand, how much of the purchase experience is driven by the consumer rather than the producer? HVAC is high capital and labor, low distribution volume. Why would a department store (if people still go to such things) devote space to it? Unlike various appliances (see discussion yesterday about decreases in quality driving increased purchase volume [0]), an HVAC is like roofing. Except for the thermostat and port covers everything is hidden and not part of a consumer aesthetic/emotional experience.
0. https://news.ycombinator.com/item?id=32462954
It's not very different from Home Depot or Costco having sections for HVAC installation.
Mini-splits are very common in Asia and is in fact easier to install (e.g. no ducting). However in the US, mini-splits being new have sort of taken on the legacy HVAC installation pricing plus some premium. You're correct that labour cost is higher in the US but it doesn't explain the 10x cost in installation - I've seen too many people overpay by $10~20k for a system they don't need.
In terms of distribution, HVAC has similar volume to other major home appliances so it's not necessarily low I think. For customer experience... yeah, it's something that most people don't think about until it breaks I suppose.
Mini-splits are very common in Asia and is in fact easier to install (e.g. no ducting). However in the US, mini-splits being new have sort of taken on the legacy HVAC installation pricing plus some premium. You're correct that labour cost is higher in the US but it doesn't explain the 10x cost in installation - I've seen too many people overpay by $10~20k for a system they don't need.
In terms of distribution, HVAC has similar volume to other major home appliances so it's not necessarily low I think. For customer experience... yeah, it's something that most people don't think about until it breaks I suppose.
What are US insurance costs. I'm talking 'oops we burned your house down insurance', 'oops we fell off a ladder insurance', and 'oh, I want to go get a checkup insurance'. These things are frighteningly expensive in the US.
Also in the US, how many laborers can they get to install these things. We've been running at 3-4% unemployment for some time now. When people can go get a job in an office they tend to do that long before doing physical labor these days, so a lot of premium is going towards that labor cost.
Also in the US, how many laborers can they get to install these things. We've been running at 3-4% unemployment for some time now. When people can go get a job in an office they tend to do that long before doing physical labor these days, so a lot of premium is going towards that labor cost.
In Asia it's like all mini split systems right? So they are seen. but I don't know why the OP decided to compare Asia vs US given this big difference.
Mini splits are super simple to install so it would make since it's cheaper.
Mini splits are super simple to install so it would make since it's cheaper.
In the U.S., the National Electric Code requires UL-listed components. The inverters, the panels, wires, even the racking must be UL-listed and not simply "UL tested". The manufacturer has to pay UL a few million dollars to list their products on their database in order to pass inspection. An inverter that costs $500 on Amazon costs about $5000 and available only through certain distributors.
Australia has no such requirement, and so they can use the cheapest inverters from China/Amazon.
Australia has no such requirement, and so they can use the cheapest inverters from China/Amazon.
I really wish there was a "lite" solar installation offered. Something like 6-8 panels (~200w each?), installed on roof and wired into the grid for 5k or less. For a small home that could really put a big dent in the electric bill and help reduce strain on the grid at the same time. Because most people hear about the massive upfront costs and feel solar is just not that practical. Is this just not realistic or maybe not worth their time (installers)?
I see this a lot in The Netherlands, quite a few of my old neighbors have around 8 panels on the roof. Cost is indeed around the order of €5k and consequently makes it very accessible. And the savings are usually a very large part of the electricity bill (heating is still mostly gas).
I live in a house with a fixed awning at the front, as it was formerly a shop.
I bought a dozen flexible panels at around $1 / watt. These are very lightweight and I was able to install them on top of the awning without going on to the roof.
Not a high powered system, nor particularly efficient in terms of space. But low material cost and self-installed.
I bought a dozen flexible panels at around $1 / watt. These are very lightweight and I was able to install them on top of the awning without going on to the roof.
Not a high powered system, nor particularly efficient in terms of space. But low material cost and self-installed.
Me too, I'd buy this.
On a tangential note, California electrical utilities are trying to destroy residential solar through excessive taxation. It's pretty sick considering the state of the climate.
https://solarrights.org/
https://solarrights.org/
My friend in San Diego county was looking into getting solar panels and he was telling me it's a long term gamble for possibly saving money. Solar panels forces him onto the local utilities solar plan, which raises the cost of each kwh from the grid by 10%. If he produced surplus energy the credit only offsets 1/15th the cost of each kwh. The result is the upfront cost is quite big, he would need enough solar panels to power everything and batteries to power his house through the night. Now it's a gamble between his system breaking or degrading, local utility rate increases, being required to sell and move, or if he just invested that large chunk into a relatively safe investment like a S&P index over the next 12 years.
I thought California law (for now) forced utilities to provide "net metering" - where your credits during the day offset your usage at night 1:1. No batteries needed. I don't know why that wouldn't apply to your friend.
$57 a month to maintain the connection? I think that's fair to be honest. Solar panel owners shouldn't be able to use the grid as a battery for free. That costs real hard cash to maintain. And a lot of it.
At present, solar panels users expect to be able to generate all the electricity they want on sunny days, sell the excess back to the utility for bill credits (at retail prices), and then spend the bill credits on cloudy days, or days with high energy demand.
Well this doesn't make sense for the utility. They have to maintain the grid and the more people that put up solar panels, the fewer people that are left paying for upkeep on hundreds of billions of dollars of infrastructure.
You can argue that it should be $37 instead of $57, but clearly it needs to be >$0
At present, solar panels users expect to be able to generate all the electricity they want on sunny days, sell the excess back to the utility for bill credits (at retail prices), and then spend the bill credits on cloudy days, or days with high energy demand.
Well this doesn't make sense for the utility. They have to maintain the grid and the more people that put up solar panels, the fewer people that are left paying for upkeep on hundreds of billions of dollars of infrastructure.
You can argue that it should be $37 instead of $57, but clearly it needs to be >$0
Looks like their propaganda is working. Do you realize that everyone already pays to maintain a connection to the grid? It's right there on your electric bill whether you have solar or not. Getting solar doesn't exempt you from existing fees and taxes. In fact some utilities don't even allow you to disconnect from the grid.
It's also not $57 a month. That's the "average" tax, whatever that means. With the size of my installation, it would be over $110 a month. And my installation is not out of the ordinary.
And it's not a "free battery". That's the opposite of what is happening. The utilities pay less than half of what they charge for the excess electricity that you produce.
It's an attempt to destroy residential solar. No less.
I'd actually not care about their extortion if they allowed us to disconnect from the grid and run without them, but that is illegal, at least in Los Angeles.
It's also not $57 a month. That's the "average" tax, whatever that means. With the size of my installation, it would be over $110 a month. And my installation is not out of the ordinary.
And it's not a "free battery". That's the opposite of what is happening. The utilities pay less than half of what they charge for the excess electricity that you produce.
It's an attempt to destroy residential solar. No less.
I'd actually not care about their extortion if they allowed us to disconnect from the grid and run without them, but that is illegal, at least in Los Angeles.
The Sunshot to reduce 'soft costs' in US solar identifies these things:
> SETO’s soft costs portfolio addresses a wide array of costs and barriers to solar energy deployment. Projects are working to improve market transparency of solar system costs, prices, and adoption trends; enable equitable access to solar through innovative financing and community solar; reduce costs for permitting, inspection, and interconnection; improve bulk power system and distribution system planning for larger amounts of grid-connected solar; reduce land use competition for siting solar projects; enable solar installations in new construction and with roof replacements; and improve planning for the retirement of solar panels.
> Additionally, projects develop training materials and programs to help supply a skilled workforce to meet the solar industry’s growing human resource needs, prepare those in the utility industry to manage a modern grid, and help relevant professions keep up with these rapidly emerging and advancing technologies.
https://www.energy.gov/eere/solar/soft-costs
So, just lots of little things really.
> SETO’s soft costs portfolio addresses a wide array of costs and barriers to solar energy deployment. Projects are working to improve market transparency of solar system costs, prices, and adoption trends; enable equitable access to solar through innovative financing and community solar; reduce costs for permitting, inspection, and interconnection; improve bulk power system and distribution system planning for larger amounts of grid-connected solar; reduce land use competition for siting solar projects; enable solar installations in new construction and with roof replacements; and improve planning for the retirement of solar panels.
> Additionally, projects develop training materials and programs to help supply a skilled workforce to meet the solar industry’s growing human resource needs, prepare those in the utility industry to manage a modern grid, and help relevant professions keep up with these rapidly emerging and advancing technologies.
https://www.energy.gov/eere/solar/soft-costs
So, just lots of little things really.
It's the solar installers sucking money away. It's so freaking simple to set up. Here's my price for my "initial" system. I plan on making it about 4 or 5 times larger and the prices below just gets multiplied by 5
$2,268.00 4.8kw Panels $1,577.00 6kw Inverter $4000 (22khw batteries)
Roughly paying $2 per watt but that includes 22kwh of freaking batteries otherwise it's less than a dollar per watt y'all. Right now this system is freezing my ass, distilling water and running my fridge (I'm in an rv building my property).
I'm a huge fan of string all-in-one inverters because they do much more for the price than stupid panel inverters that cost too much. That and I'm off grid so it makes much more sense because why pay PG&E at these prices.
$2,268.00 4.8kw Panels $1,577.00 6kw Inverter $4000 (22khw batteries)
Roughly paying $2 per watt but that includes 22kwh of freaking batteries otherwise it's less than a dollar per watt y'all. Right now this system is freezing my ass, distilling water and running my fridge (I'm in an rv building my property).
I'm a huge fan of string all-in-one inverters because they do much more for the price than stupid panel inverters that cost too much. That and I'm off grid so it makes much more sense because why pay PG&E at these prices.
Solar feels a lot like computer equipment. You know that advances are going to continue so it can be a waste to buy a big expensive system right now when you know that a much better and cheaper system might be available in just a year or two.
You can't wait forever, but it is hard to time when to bite the bullet when you want to install solar. Personally, I am waiting until I can install a system that will produce an average of 1000kWh per month (about $100 worth of power in my state) but only costs $6000 installed (5 year payback time). Any guesses when that will be possible?
You can't wait forever, but it is hard to time when to bite the bullet when you want to install solar. Personally, I am waiting until I can install a system that will produce an average of 1000kWh per month (about $100 worth of power in my state) but only costs $6000 installed (5 year payback time). Any guesses when that will be possible?
Cost disease is real, and residential solar is an ideal place for it to fester.
> Salesmen are over-paid, and the more they inflate the price the more they are paid.
> The companies that over-charge the most have the most ability to grow and advertise.
> Google Search will put whoever pays the most for the ad (which will probably be who is over-charging the most) at the top of the search results.
> Approximately no homeowners understand the cost structure of solar, once again making it easier to over-charge.
> Salesmen are over-paid, and the more they inflate the price the more they are paid.
> The companies that over-charge the most have the most ability to grow and advertise.
> Google Search will put whoever pays the most for the ad (which will probably be who is over-charging the most) at the top of the search results.
> Approximately no homeowners understand the cost structure of solar, once again making it easier to over-charge.
Why is almost anything more expensive in the US than in other countries?
Is it? Land is relatively cheap in much of the US. Electronics and other “stuff” in general is cheap too. Energy too, in my experience.
Land is cheap because it wasn't all given away to nobles before history books were written (we'll ignore the fact we killed everyone that there when 'we' showed up).
Energy is cheap because we tend to have a massive amount of that also, specifically coal and hydro resources.
Energy is cheap because we tend to have a massive amount of that also, specifically coal and hydro resources.
[deleted]
The fun thing is, governments survive partially on taxing energy. This means that solar adoption will cause governments ... to tax solar (funny detail: taxing the sun has historically caused the French government to topple). And it will be expensive or recurring because it will have to replace income the government would have collected from you using 1W for the lifespan of the solar installation.
And this is ignoring that from a certain point the electricity grid will only be necessary in cities and for large amounts of power. Either governments let city electricity go up in price by A LOT or they start doing things like mandating a connection to the grid (even when you don't need or want it)
And this is ignoring that from a certain point the electricity grid will only be necessary in cities and for large amounts of power. Either governments let city electricity go up in price by A LOT or they start doing things like mandating a connection to the grid (even when you don't need or want it)
You can shift energy tax to property tax or sales tax or whatever. I e.g. smell an incoming BEV travel distance tax.
You can, but I bet that there are groups that wouldn't consider that fair. Taxing energy production would be much easier than taxing energy use.
Also: what is "BEV travel" ?
Also: what is "BEV travel" ?
Battery electric vehicle travel distance tax. I.e. tax on the odometer reading.
IMO, permitting, electrical work, installation is expensive for grid-tie solar, which makes inexpensive solar solutions not possible. (Also, requiring a microinverter for every panel)
I have a off-grid lot with a ~1.5kw of solar, which cost me around 2k USD (with ~5kw battery), self-installed. I'm planning to install something similar on my home. The electrical permitting should be easy as I won't be hooking up to grid (I plan on running my mini split/heat pump off of it).
I have a off-grid lot with a ~1.5kw of solar, which cost me around 2k USD (with ~5kw battery), self-installed. I'm planning to install something similar on my home. The electrical permitting should be easy as I won't be hooking up to grid (I plan on running my mini split/heat pump off of it).
How long ago was this? I just bought batteries for solar and you can't get cheaper than around $800 per kWh without building your own battery. And panels are rarely much less than $1/Watt new so I can't see how you'd build such a system for much less than $4-5k and that's before mounting costs.
I built my own battery pack last year for $900 - 32x 55ah Lifepo and BMS, but you get prebuilt w/ warranty for ~$280/kWH (current price). See EG4 or SOK 48v batteries.
When I last looked in 2020, you could buy a pallet of new solar for ~ $0.37/watt.
Looks like prices now are around $0.50-$0.65 /watt
When I last looked in 2020, you could buy a pallet of new solar for ~ $0.37/watt.
Looks like prices now are around $0.50-$0.65 /watt
I got a 20kW (+18kW storage) system installed last year. It was NOT cheap but during the months of installation, all the components went up at least 10%, some as much as 20%. It got so bad that the installer tried to renegotiate the contract midway through.
Regardless, I'm glad I did it then. When I talked to my rep this March, she said they were months behind on even getting components now.
Regardless, I'm glad I did it then. When I talked to my rep this March, she said they were months behind on even getting components now.
Permitting for solar has a primary objective of keeping solar expensive.
Solar installations, even when done badly, have an excellent safety record post-install.
And safety issues that they do have are typically related not to the installation but to the manufacturing of the equipment, which is something an inspector can't check anyway.
Solar installations, even when done badly, have an excellent safety record post-install.
And safety issues that they do have are typically related not to the installation but to the manufacturing of the equipment, which is something an inspector can't check anyway.
tl;dr: "Two of the largest ways that Australia’s solar industry has reduced overall solar pricing is through easing both the permitting and inspection processes for new solar homeowners. These aspects of a solar installation require time and money. In fact, these “soft costs” of solar–or non-component costs–can add up to $1 per Watt to every installation, or $6,000 for an average 6 kW system."
I spoke to a Freedom Solar rep in the US and they shared solar install costs were going down and now they can be as expensive as your current bill (bill swap). Bummer, what should be a continued downtrend cost curve is going up due to install costs increasing because the alternative is increasing regardless.
Anyone know of any workarounds/suggestions for an HoA (Homeowner's Association)? They require insured & licensed solar installers, but if I did DIY it would be 1/4 or 1/3 of the price in my area (FL).
A lawyer to challenge that bylaw is all I can think of. HOAs have incredible power with their ability to attach liens.
I wonder what their concerns are specifically, besides making sure the end result looks good. Do they also have an approved list of installers? That's a red flag for corruption. I once lived in a condo where you had to install a certain replacement window type (fine, sure, it should match) but you had to get it from one of 3 approved installers. My neighbors and I realized that 2 of them would give the same quote, and the 3rd would give a slightly lower quote. The installer that would give the lower quote would be round-robined, and it was always exactly the same "discount".
I wonder what their concerns are specifically, besides making sure the end result looks good. Do they also have an approved list of installers? That's a red flag for corruption. I once lived in a condo where you had to install a certain replacement window type (fine, sure, it should match) but you had to get it from one of 3 approved installers. My neighbors and I realized that 2 of them would give the same quote, and the 3rd would give a slightly lower quote. The installer that would give the lower quote would be round-robined, and it was always exactly the same "discount".
I don't believe they have a list of approved installers but we regularly get sales people at our door from the same companies so I'm thinking there's some kind of deal there.
All external work (not just solar) requires licensed & insured from my HoA. Well, technically in the bylaws it requires the board to vote to approve the modification, but for the board to decide to vote yes requires licensed & insured. As I understand the only thing I am "allowed" to do myself is basic landscaping... as long as I provide a written plan to the HoA for them to vote on of course.
My next house won't be in an HoA-neighborhood, definitely sucks the joy out of being a first-time home buyer.
All external work (not just solar) requires licensed & insured from my HoA. Well, technically in the bylaws it requires the board to vote to approve the modification, but for the board to decide to vote yes requires licensed & insured. As I understand the only thing I am "allowed" to do myself is basic landscaping... as long as I provide a written plan to the HoA for them to vote on of course.
My next house won't be in an HoA-neighborhood, definitely sucks the joy out of being a first-time home buyer.
A common technique is to tell them you're spending the money on the solar, or on the most onerous thing possible that's still allowed by HOA rules. (Don't tell them you are intentionally being onerous, just present the alternative.)
For instance, thanks to court rulings that allow the FCC or overrule HOAs, you could put a giant hot pink DIY installed satellite dish on your roof.
Give them an olive branch, so they can pretend they won. For instance, make it clear you will exceed installation guidelines for the mounts, get the work inspected, and that your homeowners insurance covers the install.
For instance, thanks to court rulings that allow the FCC or overrule HOAs, you could put a giant hot pink DIY installed satellite dish on your roof.
Give them an olive branch, so they can pretend they won. For instance, make it clear you will exceed installation guidelines for the mounts, get the work inspected, and that your homeowners insurance covers the install.
They require a full plan of action, bill of materials, sample pictures of what it would look like, etc., so I can't get it through by being vague.
I've been thinking about a "death by documentation" approach, where I give them a very intricate and detailed plan of action that includes things such as getting inspections done.
I am trying to steer away from anything aggressive like the hot pink satellite dish as I don't want them breathing down my neck for the next 5 or so years, but might need to resort to guerrilla tactics to get it done.
I've been thinking about a "death by documentation" approach, where I give them a very intricate and detailed plan of action that includes things such as getting inspections done.
I am trying to steer away from anything aggressive like the hot pink satellite dish as I don't want them breathing down my neck for the next 5 or so years, but might need to resort to guerrilla tactics to get it done.
Send them the manufacturers installation specifications and a reference to the local building code.
For BOM, price the system, and send them the quote. Include screws, flashing and caulk if you're feeling motivated.
As for pictures, there are free landscape design (and other) tools that will Photoshop in panels from a street view picture or 3d box diagram of your house. This shouldn't take more than an hour or two.
Plan of action:
- obtain permits
- install mounts, then panels, then wiring (per above code)
- inspection
- energize system
You should be more subtle than the satellite dish. For instance, do the bylaws say anything about front lawn mounted solar panels, or freestanding solar carports?
Maybe you've decided to go forward with a completely misguided repainting of the front of the house in homage to Mondrian (subject to HOA color palletes, of course), or to put in some "classical" (tasteful nudity) stained glass front entrance windows you made yourself.
Are these ideas malicious or stupid? Who's to say? Make it clear your budget is limited. :-)
For BOM, price the system, and send them the quote. Include screws, flashing and caulk if you're feeling motivated.
As for pictures, there are free landscape design (and other) tools that will Photoshop in panels from a street view picture or 3d box diagram of your house. This shouldn't take more than an hour or two.
Plan of action:
- obtain permits
- install mounts, then panels, then wiring (per above code)
- inspection
- energize system
You should be more subtle than the satellite dish. For instance, do the bylaws say anything about front lawn mounted solar panels, or freestanding solar carports?
Maybe you've decided to go forward with a completely misguided repainting of the front of the house in homage to Mondrian (subject to HOA color palletes, of course), or to put in some "classical" (tasteful nudity) stained glass front entrance windows you made yourself.
Are these ideas malicious or stupid? Who's to say? Make it clear your budget is limited. :-)
You might want to check your state laws, too. DIY for mounting the panels is one thing, but tying into the grid is another, because you need to set up backfeed correctly otherwise you're putting linemen at risk. If you already know how to do all of this correctly, then maybe you could just get your electrician license ;-)
I could make the connections myself but I am still going to hire that part out. Run the wiring myself but let them do a final check over and connect to grid. In FL I believe you need to spend 4 years working to get an electricians license. If it was just a written test I would do it!
It's complex, literally: local regulations, a lot to do with homeowners associations, drive the cost through the roof.
TL;DR: Less regulations in Australia lead to solar systems being 1/3 the price of US solar systems. However, US solar systems tend to perform for 20+ years, whereas a significant number of Australian systems have "sharply" degraded performance after 5 years.
Checking the articles sources, apparently lots of installed panels in Australia stop working after ~5 years and the remaining functional panels decline in performance 12%.
This is an interesting trade off. Would I prefer a solar system that is 1/3 the cost but 1/4 the life in the US? I don't know. I think the average time spend in one home is around 7 years (don't quote me, I could be very wrong here), so it seems like each homeowner could install their own system and be fine. Cheaper systems also mean that more people could install them.
Not a policy expert, don't trust my thoughts.
Checking the articles sources, apparently lots of installed panels in Australia stop working after ~5 years and the remaining functional panels decline in performance 12%.
This is an interesting trade off. Would I prefer a solar system that is 1/3 the cost but 1/4 the life in the US? I don't know. I think the average time spend in one home is around 7 years (don't quote me, I could be very wrong here), so it seems like each homeowner could install their own system and be fine. Cheaper systems also mean that more people could install them.
Not a policy expert, don't trust my thoughts.
On one hand I agree, on another, I worry about the amount of waste that this creates. We are trading pollution from other centralized energy sources for millions of homes with N solar panels which will have to possibly be removed and replaced in 5-7 years. It’s the same as the waste that is created by purchasing appliances these days that basically are unrepairable and thrown away and replaced.
Given a 7 year life, you are effectively creating 4x the waste as a quality system. Multiply that by millions of homes and I don’t see how the trade off is worth it.
Given a 7 year life, you are effectively creating 4x the waste as a quality system. Multiply that by millions of homes and I don’t see how the trade off is worth it.
> Would I prefer a solar system that is 1/3 the cost but 1/4 the life in the US? I don't know.
Hmmm.
If we assume that solar panels are rapidly advancing, then probably?
The reason 'move fast and break things' works for computers, is that computers are gonna be upgraded in 2 years anyway and we are going to rewrite everything in 5 to 10 years with whatever new programming language becomes popular then.
--------
If solar panels are going such a revolution, then yeah, shorter lifespan and short term decisions dominate.
Hmmm.
If we assume that solar panels are rapidly advancing, then probably?
The reason 'move fast and break things' works for computers, is that computers are gonna be upgraded in 2 years anyway and we are going to rewrite everything in 5 to 10 years with whatever new programming language becomes popular then.
--------
If solar panels are going such a revolution, then yeah, shorter lifespan and short term decisions dominate.
Isn't the whole point of solar that it's "clean" and "renewable"? If we are wasting panels every 5 years that doesn't sound clean or renewable to me.
It depends on the embodied carbon of the panels and the time for it to be less than the local power plant.
(There's also the actual wasted panels, and raw materials, but let's face it, that's rounding error vs five years of household waste. Also, the replacement will probably be better on those fronts.)
(There's also the actual wasted panels, and raw materials, but let's face it, that's rounding error vs five years of household waste. Also, the replacement will probably be better on those fronts.)
Improperly installed solar can be quite dangerous to both the homeowner and grid workers.
If it's not grid-tie, I say have at it. Require by law that the property specify that the work was not done by a professional if it's ever sold and the only people exposed to that risk are mostly the people who made the bad decisions.
If it's grid-tied (or accidentally grid-tied) not having a properly installed and configured transfer switch could quite literally mean (and has meant, plenty of times) killing a maintenance worker.
If that's even a possibility it's not responsible to allow DIY work in this area.
If it's not grid-tie, I say have at it. Require by law that the property specify that the work was not done by a professional if it's ever sold and the only people exposed to that risk are mostly the people who made the bad decisions.
If it's grid-tied (or accidentally grid-tied) not having a properly installed and configured transfer switch could quite literally mean (and has meant, plenty of times) killing a maintenance worker.
If that's even a possibility it's not responsible to allow DIY work in this area.
Does this basically mean that the only real piece of equipment that needs to be rock solid is the transfer switch, and not necessarily the whole system consisting of panels, batteries and inverters (for grid tied systems)?
You could mislabel lines that stay live after grid disconnect as though they were on the grid side of the cutoff switch.
Making truely idiot-proof high voltage wiring is difficult. However, that's what inspectors are for (in theory).
Also, solar panels are heavy and pointy and often stored on roofs where the wind can grab them. Again, inspectors should check this.
Making truely idiot-proof high voltage wiring is difficult. However, that's what inspectors are for (in theory).
Also, solar panels are heavy and pointy and often stored on roofs where the wind can grab them. Again, inspectors should check this.
For safety, yes. For performance, no. Cheap Chinese inverters can create all sorts of nasty effects on the local distribution segment, but IMO performance requirements should be up to local distribution utilities when they allow the interconnect, not a matter of national concern.
> If that's even a possibility it's not responsible to allow DIY work in this area.
At least in the US, in most states, you're entirely allowed to do your own electrical work on your primary residence, and it has to meet the same standards, same inspections, same permits, etc, as any other install.
As far as grid tie and rapid shutdown, the only thing that really matters there is the inverter. If they're a UL listed inverter, they'll shut down properly when the grid drops, at least on the backfeed ports (some have automatic transfer switches and such built in to continue powering the house grid down).
Also, can you cite evidence of a DIY install actually killing ("plenty of times") a lineworker? The techniques I've seen for line work involve "dead shorting the phases and neutral all together before doing anything," which makes the grid segment quite impossible to energize for invasive work, even if someone somewhere else screws up. And I've seen some reports of generator based backfeeding injuring or killing lineworkers (who generally were half a dozen safety protocol violations in at the time), but I've not seen any related to solar - because grid tie inverters simply don't work that way for any I've found.
At least in the US, in most states, you're entirely allowed to do your own electrical work on your primary residence, and it has to meet the same standards, same inspections, same permits, etc, as any other install.
As far as grid tie and rapid shutdown, the only thing that really matters there is the inverter. If they're a UL listed inverter, they'll shut down properly when the grid drops, at least on the backfeed ports (some have automatic transfer switches and such built in to continue powering the house grid down).
Also, can you cite evidence of a DIY install actually killing ("plenty of times") a lineworker? The techniques I've seen for line work involve "dead shorting the phases and neutral all together before doing anything," which makes the grid segment quite impossible to energize for invasive work, even if someone somewhere else screws up. And I've seen some reports of generator based backfeeding injuring or killing lineworkers (who generally were half a dozen safety protocol violations in at the time), but I've not seen any related to solar - because grid tie inverters simply don't work that way for any I've found.
I did a brief search and found a case of a line worker dying due to someone backfeeding a gas generators after a hurricane:(https://www.oshrc.gov/assets/1/6/06-0166.pdf)
Clearly this could happen with a dumb diy solar install, but also the case text shows that the company knew this was a possibility and enumerates several ways this accident could have been avoided.
Clearly this could happen with a dumb diy solar install, but also the case text shows that the company knew this was a possibility and enumerates several ways this accident could have been avoided.
I've seen that one before, and... as I mentioned, quite a few safety protocol violations in, bad things happened. They didn't force the line dead by grounding it on both ends, they didn't test to see if it was actually energized, and they didn't use the proper equipment or procedures to work on it as though it were energized. You can get away with that for a while, but at some point, that's going to bite you, and given power line voltages, bite hard.
But I've yet to see "plenty" of deaths attributed to DIY solar. A downed grid segment looks like a dead short to an inverter, and anything even faintly UL listed (even with a "UL Listed" sharpie marking on the box) shouldn't be feeding into a totally dead grid segment at all. Most of the grid tie inverters lack the ability to create a waveform in the first place - they can only feed into an existing waveform.
But I've yet to see "plenty" of deaths attributed to DIY solar. A downed grid segment looks like a dead short to an inverter, and anything even faintly UL listed (even with a "UL Listed" sharpie marking on the box) shouldn't be feeding into a totally dead grid segment at all. Most of the grid tie inverters lack the ability to create a waveform in the first place - they can only feed into an existing waveform.
While it does happen (shorter lifespans) you have a lot of choices in Australia too when getting solar installed in terms of the panels and the inverter used, many of them around the same price ($5k AUD for 6.6kwh panels + 5kw inverter) batteries vary wildly depending on brand.
Some simple research of the options ahead of agreeing to anything can lead to much better results.
Some simple research of the options ahead of agreeing to anything can lead to much better results.
Yeah the difference is enormous. My US-manufactured panels are warrantied to lose no more than 0.5% power output per year for 30 years.
>US solar systems tend to perform for 20+ years
Do you have concrete data for this or are you going off manufacturer claims? To the best of my knowledge - and i work in the industry - the vast majority of rooftop or domestic PV installations are under ten years old. Some of the oldest ones that were mass-installed are in Germany.
I highly doubt PV panels will last 20+ years under most environmental conditions.
Also, before you compare PV lifetimes between the USA and australia, bear in mind that the great majority of Australian installations are very close to salt water. That plays havoc with anything installed outdoors, particularly metals and glass.
Do you have concrete data for this or are you going off manufacturer claims? To the best of my knowledge - and i work in the industry - the vast majority of rooftop or domestic PV installations are under ten years old. Some of the oldest ones that were mass-installed are in Germany.
I highly doubt PV panels will last 20+ years under most environmental conditions.
Also, before you compare PV lifetimes between the USA and australia, bear in mind that the great majority of Australian installations are very close to salt water. That plays havoc with anything installed outdoors, particularly metals and glass.
Just going off what the article stated. They did not cite that claim.
Ah, fair enough.
These articles tend to be generous with interpretations of their poorly cited sources. Still, without knowing where the early PV systems are in the US, it's a difficult claim to back up. There is also survivorship bias and the fact that quality control on small batches of any product is usually better than on mass market stuff.
After the section you referred to, the article goes on to claim that poor regulatory oversight is responsible for the short lifespan of Australian PV systems... again, a questionable claim.
These articles tend to be generous with interpretations of their poorly cited sources. Still, without knowing where the early PV systems are in the US, it's a difficult claim to back up. There is also survivorship bias and the fact that quality control on small batches of any product is usually better than on mass market stuff.
After the section you referred to, the article goes on to claim that poor regulatory oversight is responsible for the short lifespan of Australian PV systems... again, a questionable claim.
My solar panels are actually warrantied by the manufacturer for 30 years, and there are old panels out there in the world that are 20+ years old.
Accelerated aging works well.
Any competent, reputable company providing 30 year warranties in marine environments is going to stick test panels in a temperature-cycling salt mist chamber for an appropriate amount of time.
Any competent, reputable company providing 30 year warranties in marine environments is going to stick test panels in a temperature-cycling salt mist chamber for an appropriate amount of time.
it works well, on paper and for metals. PV panels are glass sandwiches so moisture ingress and damage is inherently slow, something accelerated ageing can't capture well.
From first hand experience, the warranties on PV panels aren't all they are made out to be. For one, manufacturing runs of many panel models last months. after, while the warranty will be honoured, you won't be receiving identical panels either electrically or cosmetically. Worse still is when the equivalent offered has different dimensions.
The warranty itself is good but doesn't account for practical considerations especially when you are working with a component that's part of a larger whole.
From first hand experience, the warranties on PV panels aren't all they are made out to be. For one, manufacturing runs of many panel models last months. after, while the warranty will be honoured, you won't be receiving identical panels either electrically or cosmetically. Worse still is when the equivalent offered has different dimensions.
The warranty itself is good but doesn't account for practical considerations especially when you are working with a component that's part of a larger whole.
(Worked in the residential solar industry on and off almost 10 years)
Financing providers, sales commissions, and profit + operating margins of the typical end-to-end residential solar sales and installation company make up a large portion of the price. What you're really paying for is convenience and expertise to understand the equipment, hire/train personnel, and jump through local - often arcane municipal requirements.
However if you measure your roof and can can find a freelance designer to draft up some CAD drawings that can get approved through your local municipality, buy the equipment yourself, and hire a crew + electrician to install it direct - you'll save quite a bit - at least 5-20k depending system size. Its more leg work, but you save enough its probably worth it. The install crew, electrician and CAD designer are the only real experts you might want to hire in for. The rest is paperwork, sales, and financing.
A pretty common $/watt is about $3.5-5/watt. Expect < $2.5/watt if you're cutting out sales and financing - doing more of the process yourself.
The other metric to look at is your estimated and actual production/panel ratio. You have flat costs on equipment but depending on where that panel is on your roof (based on shading, exposure, azimuth, etc) you might get less or more for your buck. The math is costs/month based on your financing taking into account expected production (plug numbers into a tool like https://pvwatts.nrel.gov/). A good production/panel ratio can significantly affect your ability to collect savings.
I emphasize production/panel because most of these Solar Sales companies pay their sales guy on a per/watt rate where bigger is better, not necessarily efficiency and financial benefit for the customer. This can incentivize them to push for panels in places on your roof where they'll hardly produce - adding to the overall cost of the system something that is good for them and not necessarily for you.
If you have the documents and can put good numbers together you can likely get financing through your local bank directly - or imo just pay cash if you can. Avoid PPAs, stick to loans with good rates or cash.
A really common bottleneck at these solar installation companies is either 1. permitting, or later on: inspections and interconnection approval (City/Municipality + Power Co.). The shadier solar companies can technically get paid by the financing provider prior to a customer's system being fully inspected and interconnected with the grid. This doesn't always give them in incentive to bring the project to a closure as they've already gotten paid and any additional work is a truck roll, technician hours, and troubleshooting - even if it leaves the customer without a producing system and monthly payments.
Financing providers, sales commissions, and profit + operating margins of the typical end-to-end residential solar sales and installation company make up a large portion of the price. What you're really paying for is convenience and expertise to understand the equipment, hire/train personnel, and jump through local - often arcane municipal requirements.
However if you measure your roof and can can find a freelance designer to draft up some CAD drawings that can get approved through your local municipality, buy the equipment yourself, and hire a crew + electrician to install it direct - you'll save quite a bit - at least 5-20k depending system size. Its more leg work, but you save enough its probably worth it. The install crew, electrician and CAD designer are the only real experts you might want to hire in for. The rest is paperwork, sales, and financing.
A pretty common $/watt is about $3.5-5/watt. Expect < $2.5/watt if you're cutting out sales and financing - doing more of the process yourself.
The other metric to look at is your estimated and actual production/panel ratio. You have flat costs on equipment but depending on where that panel is on your roof (based on shading, exposure, azimuth, etc) you might get less or more for your buck. The math is costs/month based on your financing taking into account expected production (plug numbers into a tool like https://pvwatts.nrel.gov/). A good production/panel ratio can significantly affect your ability to collect savings.
I emphasize production/panel because most of these Solar Sales companies pay their sales guy on a per/watt rate where bigger is better, not necessarily efficiency and financial benefit for the customer. This can incentivize them to push for panels in places on your roof where they'll hardly produce - adding to the overall cost of the system something that is good for them and not necessarily for you.
If you have the documents and can put good numbers together you can likely get financing through your local bank directly - or imo just pay cash if you can. Avoid PPAs, stick to loans with good rates or cash.
A really common bottleneck at these solar installation companies is either 1. permitting, or later on: inspections and interconnection approval (City/Municipality + Power Co.). The shadier solar companies can technically get paid by the financing provider prior to a customer's system being fully inspected and interconnected with the grid. This doesn't always give them in incentive to bring the project to a closure as they've already gotten paid and any additional work is a truck roll, technician hours, and troubleshooting - even if it leaves the customer without a producing system and monthly payments.
I really don't understand the obsession with homeowner solar. The financing schemes are crazy (companies owning part of your roof, renting the equipment, etc.). The only way to do it properly is to either pay someone else cash or to do it yourself. But then, even then, when I did my ROI calculation a few months ago (I live in a small house that is very efficient as-is), I was looking at 10-15 years before I'd see any savings. Then, I learned that the lifespan on some of the equipment and panels may only be 20 years. Granted, replacing them beats the cost of the original install and permitting process, but now I have something else in addition to shingles on my roof that needs replaced after a couple of decades.
It just doesn't make sense to me to mess with it now. As others have mentioned, pushing for grid solar/nuclear/other clean energy is really the only way to do this efficiently. Then I won't have a mass of ugly panels stuck on my roof.
It just doesn't make sense to me to mess with it now. As others have mentioned, pushing for grid solar/nuclear/other clean energy is really the only way to do this efficiently. Then I won't have a mass of ugly panels stuck on my roof.
The ROI can change a lot depending on your particular circumstances, though. If you live in a not-so-sunny place with minimal electricity use, a 10-15 year ROI isn't unreasonable. But if you live in a sunny place and pay a lot for HVAC or an electric car, the payback can be much shorter (sometimes 5 to 7 years, especially if you self-install). Time-of-use billing can also dramatically change the numbers, depending on your state/electric utility and household usage habits -- sometimes even to the point where you can use a battery to play electricity arbitrage, buying/generating low and selling back high (if your area allows such a scheme).
Electricity prices are expected to keep going up too. But there is also uncertainty in how utilities will renegotiate (or else grandfather in) existing solar ratepayers. California's solar pricing schemes have changed a lot just in the last decade as they went from minimal solar to solar oversaturation (the grid couldn't keep pace with the # of installs).
At the end of the day, for some homeowners, solar is a no-brainer. For others, it doesn't make sense. It totally depends... it isn't an automatic win, but also not something that should be categorically written off. It's worth investigating, especially for new constructions that are heavily electrified (i.e. use electricity for heating/cooling/cooking instead of gas or other fuels).
But agreed that grid-scale makes more sense, combined with other power technologies.
One minor nitpick: It's unlikely the PV modules (solar panels) themselves will fail in 20 years; you'll more likely have to replace your inverter before the cells themselves break. Sometimes those inverters are string inverters in your house (no roof work needed), other times they are microinverters/power optimizers attached to the modules themselves, which would make it more complicated to replace.
Electricity prices are expected to keep going up too. But there is also uncertainty in how utilities will renegotiate (or else grandfather in) existing solar ratepayers. California's solar pricing schemes have changed a lot just in the last decade as they went from minimal solar to solar oversaturation (the grid couldn't keep pace with the # of installs).
At the end of the day, for some homeowners, solar is a no-brainer. For others, it doesn't make sense. It totally depends... it isn't an automatic win, but also not something that should be categorically written off. It's worth investigating, especially for new constructions that are heavily electrified (i.e. use electricity for heating/cooling/cooking instead of gas or other fuels).
But agreed that grid-scale makes more sense, combined with other power technologies.
One minor nitpick: It's unlikely the PV modules (solar panels) themselves will fail in 20 years; you'll more likely have to replace your inverter before the cells themselves break. Sometimes those inverters are string inverters in your house (no roof work needed), other times they are microinverters/power optimizers attached to the modules themselves, which would make it more complicated to replace.
Hi, I have similar calculations, but Germany has a simpler model installing 800 W solar system without any paperwork for one electricity meter. Produced but not consumed electricity is not paid for. However it covers most use cases. It worked sooo well for my colleague, that he illegally installed second 800 W system on second phase (we have here mostly 3 phase systems in Germany). I am waiting for autumn/winter to get my system cheaper off season. The savings come in second year with regular prices and in third year with current insane prices.
A) financing is crazy, don’t do it
B) if the ROI doesn’t work, don’t do it.
For many people though (older / less efficient homes, larger families, more expensive electricity) it makes a lot of sense. I did a 10kw system on my last home and the break even point was 6 years. The couple with no kids that bought the house from us likely won’t have an electric bill above $0 for years…
For many people though (older / less efficient homes, larger families, more expensive electricity) it makes a lot of sense. I did a 10kw system on my last home and the break even point was 6 years. The couple with no kids that bought the house from us likely won’t have an electric bill above $0 for years…
I got a copy of my friend's permit application from a professional installation, learned a bit about the equipment and tools needed, started a spreadsheet of parts, and modified my "permit template" with details about my installation and house. My permit application was stamped on my first try (Manhattan Beach in LA County), so I placed my order.
It was a little tricky to get all my supplies on the roof of my two-story house. I settled on carrying things up the stairs, putting them on a balcony, and pulling them up a ramp I built out of some cheap wood. See pics here [1].
I probably went overboard on quality of parts to compensate for inexperience and not knowing which corners it's OK to cut, but my final cost ended up at $1.64/watt, including about $1000 for my electrician to pull some copper, ground everything, and connect to my panel.
[1] https://github.com/hamikm/solar-report#pictures-from-my-firs...