QBittorrent: Open-Source, Lightweight BitTorrent Client with No Ads(github.com)
github.com
QBittorrent: Open-Source, Lightweight BitTorrent Client with No Ads
https://github.com/qbittorrent/qBittorrent
30 comments
Forced to use an old version because the newer versions are really buggy on macOS. (They acknowledge it too, and say they lack mac developers).
OT Does anyone know if the torrent technology itself allow incremental stuff? For example, if a torrent contains the first N episodes of a series and the N+1 episode comes out, is it possible to create for the new episode which references the previous torrent so that a client doesnt have to download any previous episode?
BEP46 aka Dynamic Content Updates and Decentralization is, if I recall correctly, rolled into BEP-52 , aka The BitTorrent Protocol Specification v2 which has been the standard since 2020 (or so) and on paper since 2017 (ish).
( again, IIRC )
Question is, of course, how many release groups, public and private trackers are supporting this feature?
https://medium.com/@kyodo-tech/bittorrent-protocol-v2-and-dy...
https://www.bittorrent.org/beps/bep_0046.html
https://www.bittorrent.org/beps/bep_0052.html
https://blog.libtorrent.org/2020/09/bittorrent-v2/
( again, IIRC )
Question is, of course, how many release groups, public and private trackers are supporting this feature?
https://medium.com/@kyodo-tech/bittorrent-protocol-v2-and-dy...
https://www.bittorrent.org/beps/bep_0046.html
https://www.bittorrent.org/beps/bep_0052.html
https://blog.libtorrent.org/2020/09/bittorrent-v2/
qbittorrent supports this
https://www.ghacks.net/2022/01/08/bittorrent-client-qbittorr...
https://www.ghacks.net/2022/01/08/bittorrent-client-qbittorr...
qbittorrent, transmission, other recent libraries support the protocol; what I've yet to see at any scale is community support in tracking communities.
For example (say) a 2024 Season release torrent of Free-To-Air Australian Media Watch that updates each week with additional (weekly) episodes and corrected subtitles as they're improved
(typically three waves of subtitles- "Live to air" real time lagging subtitles with errors; then corrected and tightened subtitles, and lastly 'perfect' subs with precise syncing and no [undeciphered mumble])
The tooling is there, the community support and uptake is still lagging.
For example (say) a 2024 Season release torrent of Free-To-Air Australian Media Watch that updates each week with additional (weekly) episodes and corrected subtitles as they're improved
(typically three waves of subtitles- "Live to air" real time lagging subtitles with errors; then corrected and tightened subtitles, and lastly 'perfect' subs with precise syncing and no [undeciphered mumble])
The tooling is there, the community support and uptake is still lagging.
Ooo cool
Right, like in all decentralized systems, ensuring that all parts are working together is a challenge. Thanks for this.
Right, like in all decentralized systems, ensuring that all parts are working together is a challenge. Thanks for this.
Torrents can have the same files in the same spots, in which case, the client can match up 99% of a given file (1% needing to be redownloaded due to pieces that go across file boundaries).
Alternatively, it can just have the old torrent file in the new torrent: Many clients support recursive downloading, it will then recognize that it already has the old torrent, and won't re-download.
Alternatively, it can just have the old torrent file in the new torrent: Many clients support recursive downloading, it will then recognize that it already has the old torrent, and won't re-download.
I've been using this for years since uTorrent went to shit. I can't recommend it enough.
out of the loop here, what happened to utorrent?
Monetization happened to utorrent.
Probably best there is, altho I have a nitpick: they dont allow remembering my choice to "Download first and last pieces first" and "Download in sequential order". Even after raising a PR request Ive been told that allowing users to select that would be harmful for torrent health. Jeez, dont assume you know my usecase, I can guarantee that even if 50% of users had this enabled, torrents would be just fine. They could even hide the option to remember these two settings somewhere deep, but no... if I want it, I am supposed to build from source. ..
Have you ever considered that you may be wrong and this would actually be a bad feature?
But I'm sure you know more about the technical details of torrenting than the QBittorrent developers.
But I'm sure you know more about the technical details of torrenting than the QBittorrent developers.
Even if I always seed 5x?
Also contains a headless server named qbittorrent-nox. I use it in my server.
Transmission is also great for this. You can run it completely headless, or you can run the GUI locally and connect via web interface remotely. It's very flexible and has been great to work with.
Deluge was my go-to for this for years and years and years. More diversity in this ecosystem is good to see
I'm a fan of aria2c [1] in server mode paired with a lightweight WebUI [2].
Works really well on a small machine. Start aria2 as a service in systemd tied to a user with some basic isolation (or put it in a Docker container!)
[1] https://github.com/aria2/aria2 [2] https://github.com/mayswind/AriaNg
Works really well on a small machine. Start aria2 as a service in systemd tied to a user with some basic isolation (or put it in a Docker container!)
[1] https://github.com/aria2/aria2 [2] https://github.com/mayswind/AriaNg
qbittorrent + gluetun works like magic (if you’re running containers).
https://github.com/qdm12/gluetun
https://github.com/qdm12/gluetun
How is this better from indestructible Deluge?
Personally I've always found deluge to be slow, buggy, and prone to crashing. It also is much more simplistic. It's been a long time since I've used it so I can't remember offhand what features it's missing. I just remember it not being a power-user application.
It's fine, I guess. QBittorrent is just much more powerful and stable.
It's fine, I guess. QBittorrent is just much more powerful and stable.
When using a VPN, will leak your IP address. Use https://ipleak.net/ to check. It'll show your VPN IP address, home ip address, and your IP address will leak your client information. Even if you bind it to the right bindings in the settings it'll still randomly do this.
When I saw that in the ipleak after seeding something to my private server I was in awe; that good software like this would allow something like that.
When I saw that in the ipleak after seeding something to my private server I was in awe; that good software like this would allow something like that.
I think you mean proxy, not VPN? AFAIK qBittorrent doesn't natively do any kind of VPN stuff, so the issue would be elsewere, since it shouldn't be possible if configured properly.
If we're actually talking proxies: If you enable UDP-based protocols, it's very hard to avoid IP leaking. A surprising amount of clients just don't support proxying UDP at at all, or misbehave in various ways.
Word of advice: Set up the torrent client in a dedicated VM (or box) and set it up on kernel-level to route all its traffic through a separate VM(/box), which itself connects to the VPN (Wireguard,OVPN or what-have-you) and forwards traffic. It sounds complex but is robust and avoids a lot of potential pitfalls.
Reliably routing P2P UDP traffic with container networks is a fool's errand so I wouldn't recommend Docker networks (ofc fine to run the container with network=host tho)
If we're actually talking proxies: If you enable UDP-based protocols, it's very hard to avoid IP leaking. A surprising amount of clients just don't support proxying UDP at at all, or misbehave in various ways.
Word of advice: Set up the torrent client in a dedicated VM (or box) and set it up on kernel-level to route all its traffic through a separate VM(/box), which itself connects to the VPN (Wireguard,OVPN or what-have-you) and forwards traffic. It sounds complex but is robust and avoids a lot of potential pitfalls.
Reliably routing P2P UDP traffic with container networks is a fool's errand so I wouldn't recommend Docker networks (ofc fine to run the container with network=host tho)
There is the open source software project gluetun, that allows setting up a containers that are only able to communicate through a vpn network interface in an easy way.
https://github.com/qdm12/gluetun
With this it is not much effort to set up qbittorrent in a privacy secure way.
https://github.com/qdm12/gluetun
With this it is not much effort to set up qbittorrent in a privacy secure way.
gluetun can be great for many other use-cases, but what I said still stands regarding udp p2p like bittorrent. You are very likely to get surprises like GP unless you are very lucky or really know what you are doing wrt the actual networking configuration.
If the VPN container does things correctly and kills the default non-vpn route, how would those surprises occur? To be clear, I hope 3np is talking about containers like the following, and not trying to proxy only udp or only tcp piecemeal.
services:
vpncontainer:
image: <whatever>
container_name: vpncontainer
cap_add: [NET_ADMIN]
vpn-qbittorrent:
image: lscr.io/linuxserver/qbittorrent:latest
container_name: vpn-qbittorrent
network_mode: service:vpncontainer
# and optionally, for other purposes, not qbittorrent above
vpn-socks:
image: serjs/go-socks5-proxy
container_name: vpn-socks
network_mode: service:vpncontainer
# environments, volumes, ports, systctls, port-fwd helpers omittedI'm saying that the underlying container networking (Docker or whatever backend you use for podman) might not behave like you/the software are expecting with these in context more esoteric protocols.
If you verify that it behaves like you intend (dump network traffic and make sure packets go where they should over some reasonable timespan and across restarts) and ideally are prepared to file issue for any bug you come across (clears throat) definitely don't let me dissuade you from trying, though. It _should_ work.
If you verify that it behaves like you intend (dump network traffic and make sure packets go where they should over some reasonable timespan and across restarts) and ideally are prepared to file issue for any bug you come across (clears throat) definitely don't let me dissuade you from trying, though. It _should_ work.
This is concerning claim, but I checked it all out and have verified my IP is not being leaked (that is a neat site BTW, thanks for sharing).
I will say, I don’t have a ‘standard’ setup with qBittorrent and a VPN provider, so I’ll share some details in hopes that it will be useful to someone.
I use qBittorrent in headless mode with the web interface- so it’s running on a little server within docker. The docker compose has two services, one WireGuard (lscr.io/linuxserver/wireguard) the other qBittorrent (lscr.io/linuxserver/qbittorrent). The qBittorrent service has ‘network_mode: service:WireGuard’ so that it uses the WireGuard network. I’ve got WireGuard all setup with my VPN provider.
While all that should theoretically be all you need, I also configure qBittorrent to use my VPN’s SOCKS5 proxy. This acts as a great safeguard, if the VPN isn’t functioning, then the proxy auth will fail and will act as a kill switch to qbittorrent. Be sure to configure qBittorrent to use the proxy for everything (I can’t remember if this is default or not).
I will say, I don’t have a ‘standard’ setup with qBittorrent and a VPN provider, so I’ll share some details in hopes that it will be useful to someone.
I use qBittorrent in headless mode with the web interface- so it’s running on a little server within docker. The docker compose has two services, one WireGuard (lscr.io/linuxserver/wireguard) the other qBittorrent (lscr.io/linuxserver/qbittorrent). The qBittorrent service has ‘network_mode: service:WireGuard’ so that it uses the WireGuard network. I’ve got WireGuard all setup with my VPN provider.
While all that should theoretically be all you need, I also configure qBittorrent to use my VPN’s SOCKS5 proxy. This acts as a great safeguard, if the VPN isn’t functioning, then the proxy auth will fail and will act as a kill switch to qbittorrent. Be sure to configure qBittorrent to use the proxy for everything (I can’t remember if this is default or not).
You shouldn't need any kind of "kill switch" for qBittorrent: normally when you set up a VPN (I use OpenVPN for reference), on Linux you get a new network device, usually called "tun0". In qBittorrent, you can specify the network device to use, rather than just letting it automatically select one. So set this to "tun0", and it'll only pass traffic over this virtual device; if something goes wrong with the VPN, qBittorrent will just be sending packets into the void.
I think this can be fixed by first understanding that a VPN is a proper network.
You do not have to rely on the qbittorrent client to do any proxying. Turn that setting off.
A wireguard VPN is literally a network that you can route traffic through. If you can somehow force qbittorrent to route all its traffic through a wireguard interface and not your wifi/eth interface, you wont need the proxy settings as your IP will be hidden by virtue of you using the wireguard network rather than your home network.
You do not have to rely on the qbittorrent client to do any proxying. Turn that setting off.
A wireguard VPN is literally a network that you can route traffic through. If you can somehow force qbittorrent to route all its traffic through a wireguard interface and not your wifi/eth interface, you wont need the proxy settings as your IP will be hidden by virtue of you using the wireguard network rather than your home network.
Assuming this is true, one way you could mitigate is to place it into a network namespace where the only available interface is the one you want your program to use. e.g. https://www.wireguard.com/netns/#ordinary-containerization
Note that this can still leak traffic like DNS requests via domain sockets that connect to a handler outside the namespace. The New Namespace Solution on that page should prevent that I think if you want to route all traffic through the vpn by default.
Note that this can still leak traffic like DNS requests via domain sockets that connect to a handler outside the namespace. The New Namespace Solution on that page should prevent that I think if you want to route all traffic through the vpn by default.