Startup is about to install bladeless rooftop wind turbines on box buildings(electrek.co)
electrek.co
Startup is about to install bladeless rooftop wind turbines on box buildings
https://electrek.co/2024/05/24/bladeless-rooftop-wind-turbines-box-buildings/
68 comments
When we talk about solar it doesn't really matter if you want to generate 100w, 100kw or 1mw. You're pretty much using the same tech, and the pre-requisite is simple "sunshine".
But wind is more complex. If you want to generate a lot, then you need space (to build a tower), height (higher is better) and size (bigger is MUCH better.) And wind.
But if you just need a little, say 3kw, then you're not looking for the best possible outcome, you're looking for local outcome.
Most of us are location bound. I want to generate energy here - because I use it here. There are constraints (noise, size, height etc.) that I live with.
Sure, I've got solar, my roof is full of that. Let's stipulate that economically I'm better off adding more solar. Let's also stipulate that my roof is "full".
I get quite a few windy days (and windy nights) a year. If I harvest 1kw/h, I'd be happy. If I generate excess I can sell it to the grid.
The obvious answer is still a 3 or 5 bladed conventional wind turbine. But that is both visual, and can be noisy.
Personally, I don't need it to compete economicly with solar. I don't need it to be "perfect wind efficient". All I need is around 3kw capacity (for 1kw output) in a residential friendly package.
Solar has shown that individuals are prepared to spend capital on residential generation. And in sufficient volume to move the grid needle. I'd love to see similar opportunities for those with more wind and less sun.
But wind is more complex. If you want to generate a lot, then you need space (to build a tower), height (higher is better) and size (bigger is MUCH better.) And wind.
But if you just need a little, say 3kw, then you're not looking for the best possible outcome, you're looking for local outcome.
Most of us are location bound. I want to generate energy here - because I use it here. There are constraints (noise, size, height etc.) that I live with.
Sure, I've got solar, my roof is full of that. Let's stipulate that economically I'm better off adding more solar. Let's also stipulate that my roof is "full".
I get quite a few windy days (and windy nights) a year. If I harvest 1kw/h, I'd be happy. If I generate excess I can sell it to the grid.
The obvious answer is still a 3 or 5 bladed conventional wind turbine. But that is both visual, and can be noisy.
Personally, I don't need it to compete economicly with solar. I don't need it to be "perfect wind efficient". All I need is around 3kw capacity (for 1kw output) in a residential friendly package.
Solar has shown that individuals are prepared to spend capital on residential generation. And in sufficient volume to move the grid needle. I'd love to see similar opportunities for those with more wind and less sun.
What is kw/h?
kilo-wut?'s per hour ;)
What is kw/h with a lowercase w? I’m familiar with W which stands for Watt, a unit of power. Could it simply be a typo like in GP’s comment who misspelled kWh?
I want a setup that generates 1 Kω/H.
1 kiloscrotums per hour is way more than any man would need.
[deleted]
The rate of change of your power consumption?
Note that wind is a good complement to solar, because it's largely driven by the heat from the ground rising upward, so it tends to start picking up in the afternoon/evening as solar starts to dip.
> 1 kw/h
Try again...
Try again...
Can you elaborate? Some of us flunked out of EE.
It's kWh. Kilowatts multiplied by hours, not kilowatts per hour.
The analogy with units you are familiar with: watts=speed (e.g. knots), energy=distance (e.g. (nautical) miles).
So a kWh of energy is kind of like saying a knot-hour. Or 1 knot for 1 hour, which equals 1 nautical mile.
You can say "I have travelled a distance of 1 knot-hour or 1 knot for an hour". It doesn't make any sense to say "I have travelled a distance of 1 knot/hour or 1 knot per hour". Knot/hour would be a unit of acceleration not distance.
Ok that's probably clear as mud. I also feel like I should make a power units quiz website because so many people get this wrong.
The analogy with units you are familiar with: watts=speed (e.g. knots), energy=distance (e.g. (nautical) miles).
So a kWh of energy is kind of like saying a knot-hour. Or 1 knot for 1 hour, which equals 1 nautical mile.
You can say "I have travelled a distance of 1 knot-hour or 1 knot for an hour". It doesn't make any sense to say "I have travelled a distance of 1 knot/hour or 1 knot per hour". Knot/hour would be a unit of acceleration not distance.
Ok that's probably clear as mud. I also feel like I should make a power units quiz website because so many people get this wrong.
> because so many people get this wrong.
All these terms are just so unintuitive for a mere mortal like me.
Energy? Power? The difference between those two words has as much importance to the common person as the difference between "empathy" vs "compassion", or "theory" vs "hypothesis", or "less" vs "fewer".
kW being a "stuff over time", but kWh being "amount of stuff"? I don't doubt the math checks out if you expand all units, but I'm as dumb as a wet rock so it took me a while to get this.
---
If people wanted me to understand this way sooner, they should have started asking me to think in terms of "kcal" (kilocalories).
At least I know that kcal is an "amount of stuff" because it's something you hear if you talk about food. And there's no mention of "hour" anywhere in the name (like with "kWh"), so the name doesn't have anything misleading.
Then just tell me that "860.421kcal/h = 1kW" (the numbers don't really matter), and ask me to solve for kcal.
When I move the "h" from the left to the right, and the equation becomes "860.421kcal = 1kW * h", everything will click.
---
Food has kcal, so kcal is something that can be stored. When the equation has "kcal" on the left, it has "kW * h" on the right, so that means batteries store "kW * h".
When I think of "kW" alone, I will remember that the "* h" moved to the left side and became "/h".
I might forget stuff, but I know what food is, and I know that there exists an equation, at one side there's "kcal", at the other side there's "kW", and there's an "h" somewhere in there.
And "kcal * h" will look wrong af, so I will remember that if the "h" at the left side, it will be "kcal/h".
Result: Now I have an intuition for this.
(EDIT: Escaping, and add some separators to hopefully make the comment easier to read.)
All these terms are just so unintuitive for a mere mortal like me.
Energy? Power? The difference between those two words has as much importance to the common person as the difference between "empathy" vs "compassion", or "theory" vs "hypothesis", or "less" vs "fewer".
kW being a "stuff over time", but kWh being "amount of stuff"? I don't doubt the math checks out if you expand all units, but I'm as dumb as a wet rock so it took me a while to get this.
---
If people wanted me to understand this way sooner, they should have started asking me to think in terms of "kcal" (kilocalories).
At least I know that kcal is an "amount of stuff" because it's something you hear if you talk about food. And there's no mention of "hour" anywhere in the name (like with "kWh"), so the name doesn't have anything misleading.
Then just tell me that "860.421kcal/h = 1kW" (the numbers don't really matter), and ask me to solve for kcal.
When I move the "h" from the left to the right, and the equation becomes "860.421kcal = 1kW * h", everything will click.
---
Food has kcal, so kcal is something that can be stored. When the equation has "kcal" on the left, it has "kW * h" on the right, so that means batteries store "kW * h".
When I think of "kW" alone, I will remember that the "* h" moved to the left side and became "/h".
I might forget stuff, but I know what food is, and I know that there exists an equation, at one side there's "kcal", at the other side there's "kW", and there's an "h" somewhere in there.
And "kcal * h" will look wrong af, so I will remember that if the "h" at the left side, it will be "kcal/h".
Result: Now I have an intuition for this.
(EDIT: Escaping, and add some separators to hopefully make the comment easier to read.)
> All these terms are just so unintuitive for a mere mortal like me. Energy? Power?
Yeah in fairness I think most people never have to deal with these units and they're used interchangeably colloquially.
kW = power. This is a rate of work. How quickly work is happening. Intuitively, cycling hard = high power, cycling with low effort = low power.
kWh = energy. 1 kWh is literally 1kW for an hour. If you are cycling pretty hard with a power of 0.1 kW for 10 hours, you have generated 1 kWh (0.1 * 10). If you cycle inhumanly hard (0.2 kW) for 3 hours you have generated 0.6 kWh (0.2 * 3).
That's it. Now some examples:
* Solar panel peak power. This is the maximum power output of the solar panels. For cycling it would be the hardest you can possibly cycle. Apparently the record for cycling is 2.7 kW! (But not for very long; unlike solar panels people get tired.)
* Battery capacity. This is in kWh. They store a finite amount of energy. If you have a battery containing 10 kWh you can eek it out slowly - if you only draw 0.1kW from it it will last 100 hours. Or you can dump all the energy in half an hour and it will output 20 kW.
The only really complicated one is battery factory output capacity, which approximately 0% of journalists understand. This is measured in Watts... because if you produce 1kWh batteries, and you make one per hour... 1kWh/ 1h is 1 kW! In other words if the batteries from the factory magically came out fully charged and you just used them as a power station without recharging them, then how much power could that power station provide? Yeah that one is a bit confusing.
Yeah in fairness I think most people never have to deal with these units and they're used interchangeably colloquially.
kW = power. This is a rate of work. How quickly work is happening. Intuitively, cycling hard = high power, cycling with low effort = low power.
kWh = energy. 1 kWh is literally 1kW for an hour. If you are cycling pretty hard with a power of 0.1 kW for 10 hours, you have generated 1 kWh (0.1 * 10). If you cycle inhumanly hard (0.2 kW) for 3 hours you have generated 0.6 kWh (0.2 * 3).
That's it. Now some examples:
* Solar panel peak power. This is the maximum power output of the solar panels. For cycling it would be the hardest you can possibly cycle. Apparently the record for cycling is 2.7 kW! (But not for very long; unlike solar panels people get tired.)
* Battery capacity. This is in kWh. They store a finite amount of energy. If you have a battery containing 10 kWh you can eek it out slowly - if you only draw 0.1kW from it it will last 100 hours. Or you can dump all the energy in half an hour and it will output 20 kW.
The only really complicated one is battery factory output capacity, which approximately 0% of journalists understand. This is measured in Watts... because if you produce 1kWh batteries, and you make one per hour... 1kWh/ 1h is 1 kW! In other words if the batteries from the factory magically came out fully charged and you just used them as a power station without recharging them, then how much power could that power station provide? Yeah that one is a bit confusing.
OP was not trying to say kWh. They were trying to say kWh per hour.
1 kWh per hour is 1 kW
Mathematically yes, but linguistically no.
One kWh per hour is the average production of the system. Calling a power generation system "1 kW" implies it maxes out at 1kW. For something like wind or solar which is usually at partial load, a 1kW system will usually not produce 1kWh per hour.
Thus it is appropriate to say "1 kWh per hour" because you will need a ~3kW system to achieve that.
One kWh per hour is the average production of the system. Calling a power generation system "1 kW" implies it maxes out at 1kW. For something like wind or solar which is usually at partial load, a 1kW system will usually not produce 1kWh per hour.
Thus it is appropriate to say "1 kWh per hour" because you will need a ~3kW system to achieve that.
"1kW average"
Yes that would also work.
IMO "kWh per hour" is clearer, because when dealing with power generation those are the units you deal with when you are connected to the grid.
When people talk about their solar generation, they say "I generated X kWh today", not "today my system averaged Y kW over Z hours" and leave the math to the listener. kWh per unit time is common when talking about home energy generation.
IMO "kWh per hour" is clearer, because when dealing with power generation those are the units you deal with when you are connected to the grid.
When people talk about their solar generation, they say "I generated X kWh today", not "today my system averaged Y kW over Z hours" and leave the math to the listener. kWh per unit time is common when talking about home energy generation.
I kind of agree. But anyway kW/h is wrong either way.
Yes, I entirely agree with that.
I hope you are trolling and not serious.
I'm not. Why would you hope that? Sort of an unkind think to say.
Would you like to elaborate on why you disagree so strongly?
Would you like to elaborate on why you disagree so strongly?
I was going to say the same - there was a big fad for building-top wind generators and then everyone figured out that the airflow over a building is really turbulent, which makes it pretty shit for power generation.
Ask anyone who sails; trees and buildings shield a lot of wind out to surprisingly far away. The reason the big boys work well is because they are much higher above the ground where the wind is stronger and more consistent. That's also why companies are trying to make kite and blimp based generators work.
Only place I've seen the rooftop turbines work was at an airport where the giant open space around the terminal buildings means winds are more even and lower to the ground.
It feels like off-grid people mostly use it as a supplement for the stormy bouts where winds are often strong when solar yield is low...or as a backup in case their solar system breaks. They're happy if they meet the needs of their fridge, for example. Modern fridges use an average of less than 100W; lower if they're not self-defrosting.
Ask anyone who sails; trees and buildings shield a lot of wind out to surprisingly far away. The reason the big boys work well is because they are much higher above the ground where the wind is stronger and more consistent. That's also why companies are trying to make kite and blimp based generators work.
Only place I've seen the rooftop turbines work was at an airport where the giant open space around the terminal buildings means winds are more even and lower to the ground.
It feels like off-grid people mostly use it as a supplement for the stormy bouts where winds are often strong when solar yield is low...or as a backup in case their solar system breaks. They're happy if they meet the needs of their fridge, for example. Modern fridges use an average of less than 100W; lower if they're not self-defrosting.
I spent 5 years working in wind microgeneration (but with helical turbines) and entirely agree.
Rooftop solar works because it's cheap and simple to set up. Wind is not that. The structural and installation requirements result in relatively high fixed costs. To offset that you need to scale the size of the turbine, and maximise the time they spend spinning. You can only go so big on buildings and the built environment reduces your capacity factor because there's loads of buildings blocking the wind.
Rooftop solar works because it's cheap and simple to set up. Wind is not that. The structural and installation requirements result in relatively high fixed costs. To offset that you need to scale the size of the turbine, and maximise the time they spend spinning. You can only go so big on buildings and the built environment reduces your capacity factor because there's loads of buildings blocking the wind.
In an urban environment is there enough updraft from "heat island" effects to harvest the energy?
I kinda assume not else someone would have done it already, but maybe my assumption is wrong because it wasn't economic before and could be now.
I kinda assume not else someone would have done it already, but maybe my assumption is wrong because it wasn't economic before and could be now.
There is some but not nearly enough to generate useful amounts of wind.
This agrees with what little I remember. Energy you can get out depends on swept area, and these don't have much of that (different rules apply to funnel designs like this one but the concept is still applicable). Wind close to the ground is too turbulent to get much power out of as well (imagine how many times it can change from blow to suck and back in a minute). They could have solved these problems, but I didn't see anything very different at their website, just creative funneling of air through a turbine. I wish them luck though.
In 2013, I had an internship at a kind of industrial incubator and fund in Kongsberg, Norway[https://kongsberginnovasjon.no/?lang=en]. Although that was 11 years ago now, and a lot has certainly changed in the industry, physics has not.
At the time, they had an explicit focus on alternative energy technologies, so recieved a lot of proposals similar to this. I do not remember the details of my analyses anymore, but I do remember that every single one of them was rejected because none of them passed a basic back-of-the-envelope plausibility evaluation.
These projects basically fail because their output is poor compared to other solutions of similar or even lower cost.
It is also important to consider how much energy it takes to manufacture their solution in the first place. How long does it take for them to actually become net carbon negative? Does it even happen in the lifetime of the product? Sometimes the answer is no (in which case, what is even the point?)
At the time, they had an explicit focus on alternative energy technologies, so recieved a lot of proposals similar to this. I do not remember the details of my analyses anymore, but I do remember that every single one of them was rejected because none of them passed a basic back-of-the-envelope plausibility evaluation.
These projects basically fail because their output is poor compared to other solutions of similar or even lower cost.
It is also important to consider how much energy it takes to manufacture their solution in the first place. How long does it take for them to actually become net carbon negative? Does it even happen in the lifetime of the product? Sometimes the answer is no (in which case, what is even the point?)
The point might be as simple as a big building wanting reduced bills or energy independence without thinking one iota about the environment. It can also be to just signal that your big building is progressive and innovative, to attract companies to your commercial real estate.
Here's another one, Ventum VX175: https://ventumdynamics.com/
Regarding what you said about ducting, I don't think that's a fair assessment. Really big turbines are the biggest bang for your buck, but they aren't exactly duct-able. And on the flip side, really big turbines can't be built in a lot of places. So the question is, does ducting help smaller scale turbines, and will placing smaller scale turbines where big turbines won't fit going to be worthwhile?
Regarding what you said about ducting, I don't think that's a fair assessment. Really big turbines are the biggest bang for your buck, but they aren't exactly duct-able. And on the flip side, really big turbines can't be built in a lot of places. So the question is, does ducting help smaller scale turbines, and will placing smaller scale turbines where big turbines won't fit going to be worthwhile?
> So the question is, does ducting help smaller scale turbines, and will placing smaller scale turbines where big turbines won't fit going to be worthwhile?
Simple ducting does help some. A group at Clarkson has been working on this. They have a wind tunnel, so they can get solid data. [1] They have a simple duct around a standard wind turbine. This gives the effect of more intake area, and they get almost twice the output power. Unclear if this is cheaper than just increasing the blade length.
Many people have been down this road. There are many, many variants on experimental ducted wind turbines. Just search for "ducted wind turbine". There are very few installations. Here's one of the few.[2] They're demo installations on college campuses.
[1] https://www.youtube.com/watch?v=EXxA-RkwuRY
[2] https://www.ductedwind.com/blog
Simple ducting does help some. A group at Clarkson has been working on this. They have a wind tunnel, so they can get solid data. [1] They have a simple duct around a standard wind turbine. This gives the effect of more intake area, and they get almost twice the output power. Unclear if this is cheaper than just increasing the blade length.
Many people have been down this road. There are many, many variants on experimental ducted wind turbines. Just search for "ducted wind turbine". There are very few installations. Here's one of the few.[2] They're demo installations on college campuses.
[1] https://www.youtube.com/watch?v=EXxA-RkwuRY
[2] https://www.ductedwind.com/blog
There has been several startups for the past decades who have tried this an disappeared afterwards.The real and legitimate research, development and improvement of wind turbines have been plagued by fad wind turbines. Fad wind turbines fly around Amazon selling big claims at breakneck speeds.
I've been interested in this company that has made vertical axis wind turbines for harsh conditions for 40 years: https://windside.com/gallery/
They have very slowly started to sell to wider market. Clearly they have never aimed at being cheapest, but their advertised maintenance free installation is a big plus. And also that the models can generate electricity at wind speeds from 2m/s to 60m/s.
They have very slowly started to sell to wider market. Clearly they have never aimed at being cheapest, but their advertised maintenance free installation is a big plus. And also that the models can generate electricity at wind speeds from 2m/s to 60m/s.
The evaluation just needs to be for longevity, repairability and maintenance needs/costs. The big purpose of wind for a lot of small scale installs is to augment solar for night time and/or continuous base load assistance to it, and not as a primary source of generation.
I'd immediately get something that just gives me a tiny 300w on average as it means my 5kwh battery lasts 5 hours at night instead of 3 (made up numbers). That puts me soooo close to being full off grid it's not even funny.
People talking about return on investment, payback periods etc are completely screwing over the uptake of solar and other non renewable sources.
I'd immediately get something that just gives me a tiny 300w on average as it means my 5kwh battery lasts 5 hours at night instead of 3 (made up numbers). That puts me soooo close to being full off grid it's not even funny.
People talking about return on investment, payback periods etc are completely screwing over the uptake of solar and other non renewable sources.
Yes, their generation numbers are not definitively defined in TFA, not even as a concrete typical range.
For those who are looking for a more intuitive understanding of what 5kW is, that's 6.7HP.
More comparisons: the power of water cookers, (a single) electric stove top and fan heaters are usually in the order of 2kW (at least in Europe with 230V AC)
5kW is just enough power for a 5 HP motor at 230v 3-phase (12.5A), and not quite enough power for a 5 HP motor @ 208v 3-phase (13.8A). If #14 wire was allowed for branch circuits in commercial construction, you could use those as your conductors, that’s how small these things are.
NEMA motor ampacity table: https://www.galco.com/circuit/fla_rate.htm
NEMA motor ampacity table: https://www.galco.com/circuit/fla_rate.htm
They also have a hurricane upgrade package.
Now we're cookin with gas
Now we're cookin with gas
Paul Gipe’s website [1] is always worth checking out when it comes to unusual wind turbine designs. He knows a ton about the history of wind energy, and lots of things have been tried before.
And this NREL report [2] is also relevant. It reviews a number of rooftop wind projects. None of them met their energy goals. And the report also recommends sticking with 3rd party certified horizontal axis wind turbines (but those still underperformed because rooftops are not great for wind energy…).
[1] https://wind-works.org/wind/small-wind/rooftop-and-urban-win...
[2] https://www.nrel.gov/docs/fy16osti/65622.pdf
And this NREL report [2] is also relevant. It reviews a number of rooftop wind projects. None of them met their energy goals. And the report also recommends sticking with 3rd party certified horizontal axis wind turbines (but those still underperformed because rooftops are not great for wind energy…).
[1] https://wind-works.org/wind/small-wind/rooftop-and-urban-win...
[2] https://www.nrel.gov/docs/fy16osti/65622.pdf
Its not "bladeless".
Its "no visible blades"
That aside, I do remember a different design that allows for omnidirectional wind capture. A tall funnel structure that directs wind from all directions to a turbine below the structure.
It seemed like a good idea, and some installations were made. However, I think the efficiency and costs did not work out.
Its "no visible blades"
That aside, I do remember a different design that allows for omnidirectional wind capture. A tall funnel structure that directs wind from all directions to a turbine below the structure.
It seemed like a good idea, and some installations were made. However, I think the efficiency and costs did not work out.
Thank Dyson for popularising the "bladeless" term. These seem like the reverse of their fans.
These things don’t generate very much power, 5kW @ 208V 3-phase is only 13.88A which means it can’t even run a single 5HP motor. It’s equivalent to ~25 200w solar panels.
You’d need 30 of these just to power a single 208v three phase 400A panel, and the size of building these would be installed on will typically have a 2000A or larger electrical service.
Assuming it runs at full capacity for an entire year and electricity costs $0.10/kWh, it would save $4,380 a year, but obviously it won’t generating at 100% all the time.
I fail to see how these would ever pay themselves back, I’d guess one of these units is between $30-50k installed, possibly more. The roof might need structural reinforcements which could push the cost higher. There will be electrical distribution equipment to transfer loads between the wind powered generators and utility power.
You’d need 30 of these just to power a single 208v three phase 400A panel, and the size of building these would be installed on will typically have a 2000A or larger electrical service.
Assuming it runs at full capacity for an entire year and electricity costs $0.10/kWh, it would save $4,380 a year, but obviously it won’t generating at 100% all the time.
I fail to see how these would ever pay themselves back, I’d guess one of these units is between $30-50k installed, possibly more. The roof might need structural reinforcements which could push the cost higher. There will be electrical distribution equipment to transfer loads between the wind powered generators and utility power.
I’ve had good results deploying both wind and solar at remote off grid sites, when there was a week of clouds due to a storm system moving through there was quite often a lot of wind and the batteries would stay fully charged.
what kind of hardware do you use to capture wind energy? It’s pretty easy to get into solar as a hobbyist but wind seems to have a higher barrier to entry (?)
Some $300 wind turbines off Ali baba that put out 300 watts or something. It was kind of like a propeller diameter 1m mounted to a little dc motor that was mostly bearings.
We mounted it on a pile to a shed made of metal covered foam panels, the whole shed blew over. Guyed it down after that.
We mounted it on a pile to a shed made of metal covered foam panels, the whole shed blew over. Guyed it down after that.
300w for 1m diameter is probably the rating for the absolute best case scenario, the average could be closer to 10x less depending on the location
https://solar.lowtechmagazine.com/2009/04/small-windmills-pu...
https://solar.lowtechmagazine.com/2009/04/small-windmills-pu...
Maybe 1m was the radius, this project was more than 15 years ago. The point was instead of dead batteries during cloudy times the wind complemented nicely and the batteries were charged and our load powered.
Oh, dear. I read as far as "Its generator system is a rotor-stator system with a highly efficient 5 kW permanent magnet generator", then immediately thought of the Turbo Encabulator:
https://youtu.be/Ac7G7xOG2Ag?si=WSdQIhyki2IDzqVm
https://youtu.be/Ac7G7xOG2Ag?si=WSdQIhyki2IDzqVm
I wonder if they could also use these as mounting platforms for mobile tower antennae?
We have a bunch of buildings where I live that are covered in black panels for antenae, rather than competing for space, it would be nice to see these as dual use.
We have a bunch of buildings where I live that are covered in black panels for antenae, rather than competing for space, it would be nice to see these as dual use.
So it's those pumpkin shaped rooftop ventilation thing with a shroud and generator?
Will they contribute to noise pollution?
My neighborhood seems to have dramatically increasing noise pollution in the last couple years. The abuses have gotten ridiculous (and often gratuitously obnoxious) enough that I suspect backlash is imminent. Until there's serious regulation, I feel like I have to ask, since the noise environment seems to be a reckless free-for-all at the moment.
My neighborhood seems to have dramatically increasing noise pollution in the last couple years. The abuses have gotten ridiculous (and often gratuitously obnoxious) enough that I suspect backlash is imminent. Until there's serious regulation, I feel like I have to ask, since the noise environment seems to be a reckless free-for-all at the moment.
By far most noise pollution in cities is due to cars. Better start with that.
Are your neighborhood noise levels caused by wind turbines or something else?
What’s the meaning of a 50kW unit with a 5kW generator?
You put ten of them in a row. Click through to the PDF. "50 kW system of 10 units occupying 50 m"
These devices are a lot like the cooling towers on ancient and modern Persian buildings
https://en.m.wikipedia.org/wiki/Windcatcher
https://en.m.wikipedia.org/wiki/Windcatcher
Another article says the company is claims
> The scalable, “motionless” wind energy unit can produce 50% more energy than rooftop solar at the same cost, said the company.
https://pv-magazine-usa.com/2024/05/23/bladeless-wind-energy...
> The scalable, “motionless” wind energy unit can produce 50% more energy than rooftop solar at the same cost, said the company.
https://pv-magazine-usa.com/2024/05/23/bladeless-wind-energy...
put solar panels on top of the wind unit
The PDF linked to in the article explains how it works: https://26011849.fs1.hubspotusercontent-eu1.net/hubfs/260118...
Obviously, it's not bladeless - you just can't see the blades. Page 4 of the PDF explains how it works: the airfoils create a vacuum above the propeller, which then sucks air from below, which generates the power.
Obviously, it's not bladeless - you just can't see the blades. Page 4 of the PDF explains how it works: the airfoils create a vacuum above the propeller, which then sucks air from below, which generates the power.
I'm glad they're sticking these only on box buildings, other shapes might not work so well.
Some similar devices with iffy claims:
- EIP - encased turbine for rooftop mounting [1]
- Sheerwind (active about 2014-2017) Really big funnels. [2] Critique: [3]
If ducting a wind turbine would help, everyone would be doing it.
[1] http://eiptechnologies.com/
[2] https://web.archive.org/web/20171221050330/http://sheerwind....
[3] https://www.youtube.com/watch?v=HtjKXb5gko0