Building a T1D smartwatch for my son from scratch(andrewchilds.com)
andrewchilds.com
Building a T1D smartwatch for my son from scratch
https://andrewchilds.com/posts/building-a-t1d-smartwatch-from-scratch
87 comments
This is exactly what I was looking for! I had a foggy idea of using a MOSFET and the button to close/open the circuit but I needed something like this to show how it all fits together. Thank you!
No problem. I haven’t had a chance to do anything hardware related for a long time, so it’s fun to think about hardware problems again.
On the topic of extending battery life mentioned in the article, one relatively straightforward thing to investigate is simply reducing the processor clock speed. Your application probably doesn’t need to run at full tilt. I think there is a function called setCpuFrequencyMhz — I think it only works with a few specific frequencies, but the lower the frequency you can pick (while still keeping up with your application’s needs), the less power the system should consume while awake.
Of course, you want to be putting the processor to sleep between updates anyways, and there is a trade off between sleeping more (which means running the processor faster so it can sleep sooner, “race to sleep”), versus the inefficiency caused by running a processor higher on the frequency/efficiency curve, so there might be an optimal frequency that isn’t the lowest or the highest possible option. It’s something that would need to be measured.
Just some thoughts! It might not make a big difference if the processor is already sleeping most of the time, but I figured I would mention it as something to try.
On the topic of extending battery life mentioned in the article, one relatively straightforward thing to investigate is simply reducing the processor clock speed. Your application probably doesn’t need to run at full tilt. I think there is a function called setCpuFrequencyMhz — I think it only works with a few specific frequencies, but the lower the frequency you can pick (while still keeping up with your application’s needs), the less power the system should consume while awake.
Of course, you want to be putting the processor to sleep between updates anyways, and there is a trade off between sleeping more (which means running the processor faster so it can sleep sooner, “race to sleep”), versus the inefficiency caused by running a processor higher on the frequency/efficiency curve, so there might be an optimal frequency that isn’t the lowest or the highest possible option. It’s something that would need to be measured.
Just some thoughts! It might not make a big difference if the processor is already sleeping most of the time, but I figured I would mention it as something to try.
Another alternative is to use ESP32's deep sleep mode. You can tell ESP to sleep until some event occurs. There are many options for waking up the microcontroller.
https://docs.espressif.com/projects/esp-idf/en/stable/esp32c...
It uses little power, so standard 18650 battery could last years with single charge.
https://www.programmingelectronics.com/esp32-deep-sleep-mode
https://docs.espressif.com/projects/esp-idf/en/stable/esp32c...
It uses little power, so standard 18650 battery could last years with single charge.
https://www.programmingelectronics.com/esp32-deep-sleep-mode
The ESP32-S3 spends most of its time in deep sleep, only waking up for about 5-10 seconds every 5 minutes. The problem I ran into was that not just the ESP32-S3, every component on the board (the accelerometer, the haptic motor driver, the LiPo battery charger, the 3v3 LDO) has a some constant, minimum (quiescent) current draw. And even how your resistors are configured (pullup or pulldown) and their resistance values contributes. To diagnose it, I would need a precision measurement tool like a ($1k) Joulescope https://www.joulescope.com/products/js220-joulescope-precisi... and probably a significant amount of time.
I recommend the [nRF PPK II](https://www.nordicsemi.com/Products/Development-hardware/Pow...), it's (relatively) affordable and most likely would dl the job just fine for you
Here's a nice video featuring the product: https://www.youtube.com/watch?v=GqmnV_T4yAU
I have also recently been through the same steep learning curve you have and the following worked for me. Reading spec sheets is fine but nothing beats measurement if its feasible. I built a custom PCB with all the power pins for all the peripherals broken out so I could put an ammeter in series with each of them individually. Then I used Nordic's inexpensive power profiler kit 2 (search for Nordic PPK2 - its under $100). Really decent specs at 100kHz sampling rate and 100nA resolution - you connect it to a PC to see the charts. I also bought my own resin 3D printer. They are so cheap these days and it helped with iterating on designs and not having to wait days for things to arrive. PS, great post, loved it.
I had this problem on a low power design. We were making an industrial temperature sensor for something that moved and we needed to run on battery.
What I ended up doing was using a second voltage regulator with an enable pin for all the accessories. When the MCU wakes up it turns power on to the accessories and waits for things to stabilize, maybe 1ms or so. Then it does what it needs to do and before going back to sleep turns all the accessories back off.
Costs you a few extra parts and a second voltage bus and the hassle of programming but it turns "small quiescent draw" into essentially zero. Maybe the regulator has a bit of leak but it should be pico amps or less.
What I ended up doing was using a second voltage regulator with an enable pin for all the accessories. When the MCU wakes up it turns power on to the accessories and waits for things to stabilize, maybe 1ms or so. Then it does what it needs to do and before going back to sleep turns all the accessories back off.
Costs you a few extra parts and a second voltage bus and the hassle of programming but it turns "small quiescent draw" into essentially zero. Maybe the regulator has a bit of leak but it should be pico amps or less.
Here's a nice write-up where power consumption is measured using a voltmeter: https://peppe8o.com/raspberry-pi-pico-w-power-consumption/
Wait until you look at the leakage current of capacitors..! Very poorly specified, if at all, and can actually swamp the consumption of active components in these low or sub-microamp situations. The dual voltage rail that msanford described is the way to go here, gate as much as you possibly can and really focus on reducing the duty cycle.
ESP's deep sleep is not great - the datasheet for the C3 says 5 uA. That's an order of magnitude above low power microcontrollers (e.g. ATSAML), and two orders of magnitude above an ultra low power timer. Not horrendous, but higher than I'd prefer for a tiny watch battery.
First of all -- awesome!
Second, if you aren't aware or in case others are interested, the main dev from the xdrip project released a custom watch as well: https://bluejay.website/ There are some posts on reddit from the dev. (for others -- the watch is available for purchase, and allows integration w/ xdrip).
Third --> we've come a long way in a short time. When I was diagnosed I had to collect urine samples and drop chemical tablets in them to see how much glucose was present. And now you are building an custom solution tailored to your and your son's needs...wow. I really applaud you.
Fourth --> I'm hoping the new discoveries in the synthetic signaling w/ insulin will finally give us a biological solution and the tech will no longer be necessary. Here's to hoping!
Second, if you aren't aware or in case others are interested, the main dev from the xdrip project released a custom watch as well: https://bluejay.website/ There are some posts on reddit from the dev. (for others -- the watch is available for purchase, and allows integration w/ xdrip).
Third --> we've come a long way in a short time. When I was diagnosed I had to collect urine samples and drop chemical tablets in them to see how much glucose was present. And now you are building an custom solution tailored to your and your son's needs...wow. I really applaud you.
Fourth --> I'm hoping the new discoveries in the synthetic signaling w/ insulin will finally give us a biological solution and the tech will no longer be necessary. Here's to hoping!
Yes! The BlueJay watch project is amazing, very encouraging to see that he was able to connect directly to the sensor from the watch with the latest version. Totally agree with you - one of the biggest sources of hope for us in those first few weeks after he was diagnosed was knowing how far the tech had come, and how many huge advancements were in the pipeline.
This is really really awesome. I applaud you.
I had my own project trying to achieve a similar outcome to you, I wrote about it here: https://www.bytesizego.com/blog/keeping-alive-with-go. Your approach is much more hardcore. I hope you find a path to make them available to more folks.
If there is anything I can do to assist you please let me know!
I had my own project trying to achieve a similar outcome to you, I wrote about it here: https://www.bytesizego.com/blog/keeping-alive-with-go. Your approach is much more hardcore. I hope you find a path to make them available to more folks.
If there is anything I can do to assist you please let me know!
Thank you! I remember reading your article! Even though you have to maintain it, it’s actually way better than what’s commercially available since you actually have control over _how_ you’re alerted, not to mention when to escalate to friends or family. I’ve heard Type 1 kids going away to college is a huge source of stress for parents/caregivers for this reason - Sugarmate and the SugerPixel help with this but it still feels like a huge problem (a Type 1 sleeping through a low).
And to think, you could have done this in software if you had the right to push your own firmware to your Apple Watch.
> I learned that One Does Not Simply put glass in front of a TFT display. It will look like a first-generation, low-budget Android phone if you do.
Do you happen to have any before-and-after photos of what this looked like, and more details on how your tortilla press DIY method works? I recently received a little hackable music player device with a TFT display that looks kind of bad and I wonder if this is something I can do to make the display look good.
Do you happen to have any before-and-after photos of what this looked like, and more details on how your tortilla press DIY method works? I recently received a little hackable music player device with a TFT display that looks kind of bad and I wonder if this is something I can do to make the display look good.
The process was applying steady pressure to the TFT display -> OCA film -> glass, sandwiched between soft rubber, for about a minute. However you need to do a decent job applying the OCA film in the first place - there are youtube videos that show how to do it.
I probably wouldn't recommend what I did in your case - it's easy to go too far and break the glass, and I'm not sure if what's wrong in your case is due to the OCA film in between the display and the glass.
I probably wouldn't recommend what I did in your case - it's easy to go too far and break the glass, and I'm not sure if what's wrong in your case is due to the OCA film in between the display and the glass.
FWIW, there is an alternative to OCA film that's slightly easier to apply in small quantities without specialized hardware - it's called LOCA glue (i.e. Liquid OCA).
I'd definitely recommend that if you're just assembling less than, say, 10 screens.
I'd definitely recommend that if you're just assembling less than, say, 10 screens.
Hi Andrew, amazing work and done for the best of reasons!
I see you are replying in the thread, in your closing notes you wrote:
> I would not have been able to get past the initial stages without ChatGPT.
One of the coolest uses of LLMs for me is indeed exploring a problem domain where I am not a subject matter expert.
The problem is if it leads you down a dead end or hallucinates a solution. Then, at the edge of your knowledge, you actually have a very small foothold with which to challenge these chat replies.
Did you also face this on the more HW 'heavy' part of your project? Any tips on how to navigate terra incognita with LLMs?
I see you are replying in the thread, in your closing notes you wrote:
> I would not have been able to get past the initial stages without ChatGPT.
One of the coolest uses of LLMs for me is indeed exploring a problem domain where I am not a subject matter expert.
The problem is if it leads you down a dead end or hallucinates a solution. Then, at the edge of your knowledge, you actually have a very small foothold with which to challenge these chat replies.
Did you also face this on the more HW 'heavy' part of your project? Any tips on how to navigate terra incognita with LLMs?
Lots of trial and error! ChatGPT was sometimes helpful with hardware and electrical engineering questions, sometimes not. Since I would need to wait a while for the next version of the PCB to show up, it was important to check and verify things, but it did help me find my bearings and develop a general understanding of concepts. I learned a lot from open-source reference implementations from similar projects. I was able to get a lot of help while learning the software as well - in this case Fusion 360 and KiCad - though sometimes ChatGPT would invent a setting that should be there but isn't. As long as you have a rapid feedback loop where you're testing and verifying what it's telling you, I don't think you'll ever find yourself very far off course.
> I didn’t have an OCA laminator, but you know what I did have? A cast-iron tortilla press.
Haha. Great read. And aesthetically it's sweet as well. I wish your son accurately tracked and lasting health. He has an amazing dad to lean on!
Haha. Great read. And aesthetically it's sweet as well. I wish your son accurately tracked and lasting health. He has an amazing dad to lean on!
Great project!
Idk if this might be useful or not, but there is a smartwatch platform (bangle.js 2) that uses the NRF52840 chip (extremely low power, solid BLE support, works with Espruino, micro python, arduino, and other IDEs) battery life is around a week, depending on what you run, of course.
The watch includes an always-on color transflective display, GPS, accelerometer , barometer, haptic motor, compass, sound, touchscreen, etc.
You could do firmware from scratch or you could use the onboard OS and write the program as an App.
The watch isn’t distracting, unless you install stuff on it to be distracting. I think your program might be able to be written as a “watch face” so that it would not have to be launched from the launcher, but you could also write firmware for the watch so that it just does what it does period.
It seems to me like this does everything you want, maybe?
I bought a couple of these (2?) years ago for my kids to program on, they have been great!
https://banglejs.com/
Idk if this might be useful or not, but there is a smartwatch platform (bangle.js 2) that uses the NRF52840 chip (extremely low power, solid BLE support, works with Espruino, micro python, arduino, and other IDEs) battery life is around a week, depending on what you run, of course.
The watch includes an always-on color transflective display, GPS, accelerometer , barometer, haptic motor, compass, sound, touchscreen, etc.
You could do firmware from scratch or you could use the onboard OS and write the program as an App.
The watch isn’t distracting, unless you install stuff on it to be distracting. I think your program might be able to be written as a “watch face” so that it would not have to be launched from the launcher, but you could also write firmware for the watch so that it just does what it does period.
It seems to me like this does everything you want, maybe?
I bought a couple of these (2?) years ago for my kids to program on, they have been great!
https://banglejs.com/
Thank you! I did actually buy a Bangle 2 early on in the project; I was impressed by the Espruino project and by how small the watch is, but it seemed slow to wake, and the screen was tiny, dim and had a lot of light bleed. But you’re making me think I should take another look. Very cool that your kids are programming their own watches!
Yeah, the transflective display is not great, but the power usage is nil when the backlight is off, which is nice. E-ink might be even nicer.. but the price is a major stumbling block for most form factors.
The pebble might be a good option though, not only is the os now open sourced but there is apparently someone trying to build new watches.
Once you get out of the hobby space, Hardware is a tough business, and there are a lot of people that would benefit from a solid solution that won’t be up for tinkering.
You might also find that there are Chinese manufacturers with white-box watches that might be running common chips like the nrf52840/832. I certainly see a lot of apparently identical smartwatches around 30 dollars that are marketed under different brands. Those might be a better direction if you are looking at a broad market.
OTOH, once you get away from the supportive and nurturing maker environment most of the fun will leak out, so depending on your motives, you might want to stick to your solution - which looks pretty great to me, even if it might not be as simple to scale production.
Best of luck with whatever direction you are looking at. By the way, you might try a resin printer if you are going to be doing any production in house. For larger multiples of small parts they are crazy fast and the finish is pretty great.
The pebble might be a good option though, not only is the os now open sourced but there is apparently someone trying to build new watches.
Once you get out of the hobby space, Hardware is a tough business, and there are a lot of people that would benefit from a solid solution that won’t be up for tinkering.
You might also find that there are Chinese manufacturers with white-box watches that might be running common chips like the nrf52840/832. I certainly see a lot of apparently identical smartwatches around 30 dollars that are marketed under different brands. Those might be a better direction if you are looking at a broad market.
OTOH, once you get away from the supportive and nurturing maker environment most of the fun will leak out, so depending on your motives, you might want to stick to your solution - which looks pretty great to me, even if it might not be as simple to scale production.
Best of luck with whatever direction you are looking at. By the way, you might try a resin printer if you are going to be doing any production in house. For larger multiples of small parts they are crazy fast and the finish is pretty great.
Thanks! Yeah, it's odd to me that there are so many cheap Apple Watch clones on Aliexpress with nice AMOLED displays and sensors galore, but nothing hackable, nothing with an e-paper/MIP display. I feel like they would make way more $$ if they made one that was hackable? Lilygo.cc has done a lot of work on open hackable watches, but they're big and not water-resistant.
Another interesting watch is zswatch. It uses a nrf mcu as well.
https://github.com/jakkra/ZSWatch
https://www.youtube.com/watch?v=MmCzV0jV9hs
https://www.youtube.com/watch?v=MmCzV0jV9hs
This looks awesome!
This is great. I do watch my Dexcom on my Apple Watch, but there's times I just want the number, ASAP. I was hoping it'd talk about eliminating the need for the iOS app ("...where he shouldn’t have to run around with a phone strapped to him...") but it sounds like it's just not possible to avoid at least periodic polling.
Reading through the product development, I'm curious why you didn't use a dev kit like the Pine Time? (https://pine64.org/devices/pinetime/) I bought one a few years ago and it's just been sitting in the box, waiting for a project to build on it. I may take a stab at something similar.
Reading through the product development, I'm curious why you didn't use a dev kit like the Pine Time? (https://pine64.org/devices/pinetime/) I bought one a few years ago and it's just been sitting in the box, waiting for a project to build on it. I may take a stab at something similar.
The G7 pairs directly with an Apple Watch and acts as the primary sync device. Unlike the G6, you don’t get null readings displaying on the watch until you open the app. I have the dexcom widget on my Apple Watch series 10 with a G7 paired with direct to watch and it always displays the current reading
That's great to hear that direct-to-watch pairing leads to a reliable reading. That's a big improvement over where things were a year ago. I am surprised that the watch becomes the primary sync device instead of the phone, but maybe that's not actually a problem in most situations.
I wore the G7 briefly, but switched back to the G6 because the long-awaited iOS integration for my pump (Omnipod) only supports the G6 at this time. (otherwise I have to carry around a separate device, which is essentially a dumbed down Android phone)
Thank you! It should be possible now with the G7 to have the watch pair directly with the sensor. We’re still on the G6. Agreed that would be much better than having to go through the iOS app and up to the cloud.
Honestly I don’t remember why I ruled out the PineTime. I purchased a Bangle.js and while it’s very small, it seemed very limited in what I could do with it. Of course with the Pebble announcement yesterday, that might change things.
Honestly I don’t remember why I ruled out the PineTime. I purchased a Bangle.js and while it’s very small, it seemed very limited in what I could do with it. Of course with the Pebble announcement yesterday, that might change things.
PineTime is nice and cheap and does a little BlueTooth. It's easy to flash your own firmware to it; I think it might have been an option.
That said, Pine64 does not do a whole lot of work on their platform and I guess a lot of people are wanting _more_. It's a simple watch and for what it does and costs it's great. If you think you'll get an open source Apple Watch, you're going to be disappointed.
That said, Pine64 does not do a whole lot of work on their platform and I guess a lot of people are wanting _more_. It's a simple watch and for what it does and costs it's great. If you think you'll get an open source Apple Watch, you're going to be disappointed.
Incredible work - so cool to see Dad being a tech and health champion for their kid. T1D is so tough and to have such incredible support is great to see.
Andrew : Amazing i always love to see the creative T1D projects. i home one day we have a biological cure . Back when the pebble watch was still a relatively new product. someone had an app for it to be a remote display for the dexcom. it required an external nodemcu based microcontroller to be a middleman, but what it did well was run for days off the battery. my wife used one for a long while; the take aways were black and white e-ink displays saved tons of power . pebbles os was good a power mgmt and it's limited features made devs stick yo core functionality not look for new cool extraneous add ons .
This is a really cool project. Your post is the first time I am seeing the figures on how much others also hate CGM notifications.
I have been working on software for the G1 headset to display glucose data without any audible alarms, just a visual notification.
The issues I run into are:
* Dexcom sensors have limited Bluetooth connections (with pump support), so I need to pull data from a phone.
* Battery life (I can get 9 hours maybe with a not always on display, a far cry from 6 days).
* xDrip gets readings slower than directly from dexcom.
* General UI edge cases for missed readings.
Thank you for sharing your work, it's validation that others are experiencing this problem and maybe my visual solution will be useful to others (and a watch/audible/haptic device also might be a good complement to what I have now, my solution is not supposed to be the only way to get CGM data.) https://github.com/ltomes/rel-a/tree/feature/xDrip
I have been working on software for the G1 headset to display glucose data without any audible alarms, just a visual notification.
The issues I run into are:
* Dexcom sensors have limited Bluetooth connections (with pump support), so I need to pull data from a phone.
* Battery life (I can get 9 hours maybe with a not always on display, a far cry from 6 days).
* xDrip gets readings slower than directly from dexcom.
* General UI edge cases for missed readings.
Thank you for sharing your work, it's validation that others are experiencing this problem and maybe my visual solution will be useful to others (and a watch/audible/haptic device also might be a good complement to what I have now, my solution is not supposed to be the only way to get CGM data.) https://github.com/ltomes/rel-a/tree/feature/xDrip
Nicely done - it's crazy that you could do this solo and the multi billion dollar device makers haven't been able to do it in many years. Would be a nice peripheral for them to sell along with their CGMs (instead of those old receiver devices that everyone stopped using in favor of smartphones). Wishful thinking, but maybe try to talk to Abbott or Dexcom to see if they will fund another open source production run of these? Output to them could be a report/collection of user feedback to help them w/ product strategy...
I really have a soft spot for engineering that improves health management or outcomes, it never feels to me as though it gets the investment it warrants. Kudos, hope you get the funding.
Awesome work building it all from scratch!
Hate to be that guy, but was using something hackable like a PineTime (https://pine64.org/devices/pinetime/) and doing a direct BLE connection to the device using the Blood Glucose Profile (https://www.bluetooth.com/specifications/specs/glucose-profi...) not an option?
Another approach could be to hack one of those cheap fitness trackers (https://rbaron.net/blog/2018/05/27/Hacking-a-cheap-fitness-t...). I got a few off AliExpress a few years ago for $9 each.
Again, not to take away anything from the amazing accomplishment to build a device from scratch, but if anyone else wants to try making one, maybe they could start with less of a steep learning curve.
Hate to be that guy, but was using something hackable like a PineTime (https://pine64.org/devices/pinetime/) and doing a direct BLE connection to the device using the Blood Glucose Profile (https://www.bluetooth.com/specifications/specs/glucose-profi...) not an option?
Another approach could be to hack one of those cheap fitness trackers (https://rbaron.net/blog/2018/05/27/Hacking-a-cheap-fitness-t...). I got a few off AliExpress a few years ago for $9 each.
Again, not to take away anything from the amazing accomplishment to build a device from scratch, but if anyone else wants to try making one, maybe they could start with less of a steep learning curve.
I didn't even know about the BLE Glucose Profile - thank you!
Valid question about the PineTime! I'd agree that it is an option, although with the dev kit out of stock, flashing a custom firmware would be tricky. I think that's probably what happened, I looked at this page back when I was first starting out on this and was scared off: https://pine64.org/documentation/PineTime/Further_informatio...
Valid question about the PineTime! I'd agree that it is an option, although with the dev kit out of stock, flashing a custom firmware would be tricky. I think that's probably what happened, I looked at this page back when I was first starting out on this and was scared off: https://pine64.org/documentation/PineTime/Further_informatio...
I didn't mean to send you down a rabbit-hole since you've already built an awesome-looking platform. Just googling, came across a devkit:
https://ameridroid.com/products/pinetime-smart-watch?variant...
The DevKit is mainly there to allow easy access the SWD pins. It can be flashed via a Pi: https://wiki.pine64.org/wiki/PineTime_Devkit_Wiring
Aaron Christophel (go-to guy for hacking wearables) has a video on flashing them via an ESP32: https://www.youtube.com/watch?v=Iu6RoXRZxOk
For OTA flash, some folks have had good luck with https://gadgetbridge.org
For those interested in going the cheap-o activity tracker route, here's another old thread on Hackaday, featuring Aaron. More good info in the comments: https://hackaday.com/2019/02/20/custom-firmware-for-cheap-fi...
Also, one last tidbit: I know the idea was to stay away from the more expensive devices, but many Apple and Android watches have built-in BLE central capability so they can scan and connect to peripherals without having to go through the phone. In later models, they can even scan in the background and update complications.
Again, not remotely as cool as building one's own device!
The DevKit is mainly there to allow easy access the SWD pins. It can be flashed via a Pi: https://wiki.pine64.org/wiki/PineTime_Devkit_Wiring
Aaron Christophel (go-to guy for hacking wearables) has a video on flashing them via an ESP32: https://www.youtube.com/watch?v=Iu6RoXRZxOk
For OTA flash, some folks have had good luck with https://gadgetbridge.org
For those interested in going the cheap-o activity tracker route, here's another old thread on Hackaday, featuring Aaron. More good info in the comments: https://hackaday.com/2019/02/20/custom-firmware-for-cheap-fi...
Also, one last tidbit: I know the idea was to stay away from the more expensive devices, but many Apple and Android watches have built-in BLE central capability so they can scan and connect to peripherals without having to go through the phone. In later models, they can even scan in the background and update complications.
Again, not remotely as cool as building one's own device!
It's quite easy to flash a custom firmware actually and I wish I never bought a “devkit” because it's useless (you really really need to mess things up badly to need to open the watch to flash it directly). You could even have simply programmed your app in Python using WASP-OS!
Really an amazing project no matter what! I learned a lot reading your article and I don't think that using a PineTime as a base would have been nearly as cool
Really an amazing project no matter what! I learned a lot reading your article and I don't think that using a PineTime as a base would have been nearly as cool
Thank you! By flashing I really meant flashing + programming/debugging so I can see serial output. Can you do that OTA? Either way, I'll have to take a closer look.
The number of skills one has to master for a project like this is just mind-boggling, and the part about the tortilla press made me laugh out loud. A labor of love in the most literal sense!
That said, I would feel pretty nervous about actually selling these, as I wouldn't be surprised if it is legally considered a medical device.
That said, I would feel pretty nervous about actually selling these, as I wouldn't be surprised if it is legally considered a medical device.
> I wouldn't be surprised if it is legally considered a medical device
Couldn't you just include a disclaimer that it isn't?
Couldn't you just include a disclaimer that it isn't?
> First, the Apple Watch (like all Apple products) is too much device for a kid. It ships with so many shiny features and apps and notifications.
It feels like a bit of an under-served market. T-mobile has a smart watch that you can lock down completely during school hours, which we've done with one of my kids (we're avoiding smartphones for now, and she's strangely quite happy with that, I honestly expected more push back.)
Unfortunately, it wouldn't work for T1D situation. I've a relative with T1D and it's been exciting seeing the technology change over the ~10 years since they got their diagnosis.
It feels like a bit of an under-served market. T-mobile has a smart watch that you can lock down completely during school hours, which we've done with one of my kids (we're avoiding smartphones for now, and she's strangely quite happy with that, I honestly expected more push back.)
Unfortunately, it wouldn't work for T1D situation. I've a relative with T1D and it's been exciting seeing the technology change over the ~10 years since they got their diagnosis.
My T1D son is 4.5yo, I book marked this page so that in a couple years I can read it a build him something that is (hopefully) just as cool. Unless I can buy it off the shelf...
Wonderful. I'm interested in learning about circuit and PCB design. What would you recommend as the best introductory resources to get started?
I would start with breadboards and modules from SparkFun or Adafruit. You can mock up a lot of functionality without needing to solder anything. If you get to the point where you're ready to jump into PCB design, check out the /r/printedcircuitboard wiki: https://www.reddit.com/r/PrintedCircuitBoard/wiki/index/. You might be able to find similar projects that have been posted and critiqued there already. SparkFun and Adafruit both publish their schematics/PCB layouts. I recommend KiCad for your PCB/schematic software - there are plenty of KiCad tutorials and guides on Youtube. Have fun!
Assuming you mean digital circuitry (99% of what's built today), I second the Adafruit recommendation. Sparkfun has good stuff but their focus is more on experimenters whereas Adafruit focuses on education. Their tutorials are very well done, and their hardware is much better "polished" than Sparkfun.
I point out to people that it's clear that Adafruit is noticeably more expensive than the cheap stuff on amazon, but the fact that you can buy something from them, follow the tutorial on it and basically expect everything to work right off the bat makes the cost worth it. Even as a professional embedded developer, I go straight to them when I need to build a prototype and don't want to waste time faffing around.
I point out to people that it's clear that Adafruit is noticeably more expensive than the cheap stuff on amazon, but the fact that you can buy something from them, follow the tutorial on it and basically expect everything to work right off the bat makes the cost worth it. Even as a professional embedded developer, I go straight to them when I need to build a prototype and don't want to waste time faffing around.
Regarding the fact that your son’s watch has 2x the battery life of the others, did you ever test the real capacity of each of the batteries? Speaking from experience, batteries sourced from random Chinese suppliers can have wildly different real-world specs, even within the same lot.
Good to know! I was wondering that as well, but wasn't able to easily swap/test different batteries since I was soldering them to the PCB and then sealing the watch. I'll research how to test capacity across different batteries.
I chart the last 7 days of battery voltage in the companion iOS app, and it does look like they're drawing current differently. My son's watch can sit in deep sleep for days and lose very little charge, unlike the other watches which seem to continue to draw current even though the ESP32-S3 is in deep sleep.
I chart the last 7 days of battery voltage in the companion iOS app, and it does look like they're drawing current differently. My son's watch can sit in deep sleep for days and lose very little charge, unlike the other watches which seem to continue to draw current even though the ESP32-S3 is in deep sleep.
It's great to see awesome work like this making a difference.
Scott Hanselman has blogged[0] and spoken at some length on tech and living with T1D going back to 2002.
[0] https://www.hanselman.com/blog/category/diabetes
Scott Hanselman has blogged[0] and spoken at some length on tech and living with T1D going back to 2002.
[0] https://www.hanselman.com/blog/category/diabetes
> ... I didn’t have an OCA laminator, but you know what I did have? A cast-iron tortilla press.
HAHA, I love this.
HAHA, I love this.
This is really cool. Having gone through some of the same challenges for hobby projects myself (learning Fusion, learning to make a PCB, learning to make the 10th revision of the PCB), you're being quite humble - each one of these things is hard with a steep learning curve.
Awesome work!
Awesome work!
> Apple makes it very difficult to do what you want to do, when you want to do it, in the name of preserving battery life and keeping the device and its other processes running smoothly.
Oh, Apple. You can't just not be annoying can you?
Oh, Apple. You can't just not be annoying can you?
Very cool!
I love the texture of the enclosure. I guess that's not possible with an FDM printer, right?
I love the texture of the enclosure. I guess that's not possible with an FDM printer, right?
Actually it is! Although your tolerances will not be as good as with a fusion jet printer. For FDM, print on a textured bed and play with the “fuzzy skin” settings in Cura. You’ll get quite close to what’s shown in the author’s pictures.
Nice, thanks!
Thank you, I do too! I wish it was possible to leave it uncoated, but it develops a worn look pretty quickly. Printing MJF through Fictiv was pretty cheap, especially if you don’t need a rush delivery.
This is a great project.
> They don’t fund consumer products like this, but we agreed that the most plausible path to market is the open-source route, potentially turning it into a more general-purpose Pebble successor.
Do you mean Kickstarter?
> They don’t fund consumer products like this, but we agreed that the most plausible path to market is the open-source route, potentially turning it into a more general-purpose Pebble successor.
Do you mean Kickstarter?
Maybe look at the new openpebble that has opensourced the Pebble Watch tech.
> Just because a thing exists in market and checks a box, doesn’t mean it works very well.
Now there is a quote I should frame and hang in the company break room.
Now there is a quote I should frame and hang in the company break room.
I just wanted to say that's a pretty awesome project, and it's great that you were able to do this for your son.
Awesome project! Direct sensor connectivity is an interesting approach. Skipping the phone app is a big win.
You nailed Apple corners! That alone shows serious dedication.
couple random nitpicks: - is the motor driver necessary? for simple vibrations, just a single Nch MOSFET between motor negative to ground(low-side switch) should suffice. - there are BLDC vibration motors, because you can(or to eliminate brush sparks) - that button cap doesn't look resistant against external water pressure, if that's a huge issue, but paradoxically waterproof without a drain hole = water container so I can't be sure anyway - color paints flake off. simple acrylic clear, or super ideally two-part urethane, top coat hides it well. I think it's just making flaking of clear layer impossible to notice but it works a lot better than color only. - I think I've seen people mentioning atrocious power saving of ESP32's entire Bluetooth sub-system. it has none or something. - entire watch being sealed from top is right choice, as it allows guts to simply pop out in an unlikely event of battery failure
but all aside that watch looks gorgeous.
couple random nitpicks: - is the motor driver necessary? for simple vibrations, just a single Nch MOSFET between motor negative to ground(low-side switch) should suffice. - there are BLDC vibration motors, because you can(or to eliminate brush sparks) - that button cap doesn't look resistant against external water pressure, if that's a huge issue, but paradoxically waterproof without a drain hole = water container so I can't be sure anyway - color paints flake off. simple acrylic clear, or super ideally two-part urethane, top coat hides it well. I think it's just making flaking of clear layer impossible to notice but it works a lot better than color only. - I think I've seen people mentioning atrocious power saving of ESP32's entire Bluetooth sub-system. it has none or something. - entire watch being sealed from top is right choice, as it allows guts to simply pop out in an unlikely event of battery failure
but all aside that watch looks gorgeous.
T1D parent here. My 11yr old has T1D. We use SugarPixel and this watch you’ve built would be amazing to have. Great job! We need more people like you
Did you ever look into an e-ink display?
I did, but they're surprisingly expensive, and a black-and-white display isn't all that exciting for a kid. An always-on display would however be perfect for this use case though.
Ah - unfortunate. I'm a type 1 diabetic myself, maybe someday I'll get round to doing something like this. Looks pretty fun
[deleted]
Thank you
I'm going to buck the trend and say this is an excellent idea, but it should absolutely NOT be used for its indended purpose. If OP wants to track his own insulin levels, fine, but to put DIY, uncertified, learn-as-you-go medical monitoring device on someone else, let alone your own son is f*cking bonkers.
Just to clear up the confusion here: there's basically no risk to this device. It's not inventing numbers on its own. It's simply a secondary display to the same data that's on the phone. The phone alarms are still there, and can't be disabled, not to mention the insulin pump, which also alarms independently.
So AIUI rephrased differently it allows finer grained management before the all hands on deck full tilt red alert alarms go blaring?
Exactly right!
Calm down. I've been building medical device software for close to two decades and the level of engineering in this device is at least what I see on multi-million dollar projects that are going for FDA approval.
Medical Design process basically exists (oversimplifying of course) because the engineers are not the users. It's entirely possible for one person to build something that far exceeds the quality and performance of an off the shelf device simply because they care to do a good job and have constant feedback on how it works.
There's a lot to be said for scratching your own itch!
Medical Design process basically exists (oversimplifying of course) because the engineers are not the users. It's entirely possible for one person to build something that far exceeds the quality and performance of an off the shelf device simply because they care to do a good job and have constant feedback on how it works.
There's a lot to be said for scratching your own itch!
Plenty of folks out there can't afford any treatment. This kid has it seems every form of treatment known to man and his dad is trying to make it more convenient for him, with the added benefit that this may make it cheaper/easier for the rest of the world. His level of risk tolerance improves the world and will cause his son no problems, while also avoiding learned helplessness.
You have no idea what you’re talking about.
For T1Ds, you pretty much constantly have to monitor your blood glucose level. I used to use a Pebble for this, now I use an Apple Watch. The Apple Watch backgrounds the monitoring all the damn time, so I have to click multiple buttons and wait to see my blood sugar, when the number is immediately available on my phone (the watch didn’t used to be this bad). The entire point of this hardware project is eliminating that latency.
For T1Ds, you pretty much constantly have to monitor your blood glucose level. I used to use a Pebble for this, now I use an Apple Watch. The Apple Watch backgrounds the monitoring all the damn time, so I have to click multiple buttons and wait to see my blood sugar, when the number is immediately available on my phone (the watch didn’t used to be this bad). The entire point of this hardware project is eliminating that latency.
xDrip4iOS has recently updated its Apple Watch app to have screen complications that show near realtime blood glucose levels.
It’s just calling APIs on the actual monitor, right? Or a service that listens to the monitor?
Feels like low risk unless the watch gets out of sync (but easy enough to change the code to stop the watch from showing old data if that happens).
Feels like low risk unless the watch gets out of sync (but easy enough to change the code to stop the watch from showing old data if that happens).
I don't see any issues with it as an additional measure, such as when playing sport as mentioned.
[deleted]
This is extremely cool!
Also sadly it'll get 10 times less upvote than making your own laptop from scratch because it's not done by a teenager.
Also sadly it'll get 10 times less upvote than making your own laptop from scratch because it's not done by a teenager.
> Another area that stumped me is how to shut the power off 100% on the device, so that it can remain “off” for weeks or months.
This is actually a pretty solvable problem...
https://circuitcellar.com/resources/quickbits/soft-latching-...
Then the microcontroller can choose at any time to completely shut off the entire circuit (including itself), and extremely little power will be consumed until something (like a button) completes the power-on circuit again.
For ease of prototyping, there are off-the-shelf units you can play with: https://www.sparkfun.com/sparkfun-soft-power-switch-jst-2mm....
Some more advanced soft power switch circuits (like the SparkFun switch) also include the ability to forcibly power down a misbehaving device by holding down the button.
The design used in the SparkFun switch also allows your microcontroller to know if the button is pushed while the device is running, so you could imagine repurposing your existing button to also restore power to the device if the device is off, and still retain the existing functionality for cycling through watch faces. Then, either the device could automatically shut itself off after a period of inactivity or when the battery gets too low, or the user could click and hold the button for some number of seconds to turn the device off completely that way.