Selection rather than prediction(voratiq.com)
voratiq.com
Selection rather than prediction
https://voratiq.com/blog/selection-rather-than-prediction/
21 comments
Good point.
This post measures `1x top-N` (one attempt each from N models), not `Nx top-1` (N attempts from the best-scoring model). We should make that more clear.
Part of why we chose `1x top-N` is that we expect lower error correlation compared to `Nx top-1`, which is also why the iid baseline is likely optimistic.
That said, a direct comparison (`Nx top-1` vs `1x top-N`, with the same review/compute budget) would be useful!
This post measures `1x top-N` (one attempt each from N models), not `Nx top-1` (N attempts from the best-scoring model). We should make that more clear.
Part of why we chose `1x top-N` is that we expect lower error correlation compared to `Nx top-1`, which is also why the iid baseline is likely optimistic.
That said, a direct comparison (`Nx top-1` vs `1x top-N`, with the same review/compute budget) would be useful!
Would you mind sharing the raw results that produced the 1x-top-1 result 24% and the raw results and computation for the error bars?
I would like to continue the likelihood calculation.
I would like to continue the likelihood calculation.
> When you commit to a single agent, you're predicting it will be best for whatever task you throw at it.
A quibbe with this: you're not predicting it will be the best for whatever task you're throwing at it, you're predicting it will be sufficient.
For well-understood problems you can get adequate results out of a lot of models these days. Having to review n different outputs sounds like a step backwards for most tasks.
I do this sort of thing at the planning stage, though. Especially because there's not necessarily an obvious single "right" answer for a lot of questions, like how to break down a domain, or approaches to coordinating multiple processes. So if three different models suggest three different approaches, it helps me refine what I'm actually looking for in the solution. And that increases my hit rate for my "most models will do something sufficient" above claim.
A quibbe with this: you're not predicting it will be the best for whatever task you're throwing at it, you're predicting it will be sufficient.
For well-understood problems you can get adequate results out of a lot of models these days. Having to review n different outputs sounds like a step backwards for most tasks.
I do this sort of thing at the planning stage, though. Especially because there's not necessarily an obvious single "right" answer for a lot of questions, like how to break down a domain, or approaches to coordinating multiple processes. So if three different models suggest three different approaches, it helps me refine what I'm actually looking for in the solution. And that increases my hit rate for my "most models will do something sufficient" above claim.
This is a good point!
We still code via interactive sessions with single agents when the stakes are lower (simple things, one off scripts, etc). But for more important stuff, we generally want the highest quality solution possible.
We also use this framework for brainstorming and planning. E.g. sometimes we ask them to write design docs, then compare and contrast. Or intentionally under-specify a task, see what the agents do, and use that to refine the spec before launching the real run.
We still code via interactive sessions with single agents when the stakes are lower (simple things, one off scripts, etc). But for more important stuff, we generally want the highest quality solution possible.
We also use this framework for brainstorming and planning. E.g. sometimes we ask them to write design docs, then compare and contrast. Or intentionally under-specify a task, see what the agents do, and use that to refine the spec before launching the real run.
Intuitively makes sense, but in my experience, a more realistic workflow is using the main agent to sub-agent delegation pattern instead of straight 7x-ing token costs.
By delegating to sub agents (eg for brainstorming or review), you can break out of local maxima while not using quite as many more tokens.
Additionally, when doing any sort of complex task, I do research -> plan -> implement -> review, clearing context after each stage. In that case, would I want to make 7x research docs, 7x plans, etc.? probably not. Instead, a more prudent use of tokens might be to have Claude do research+planning, and have Codex do a review of that plan prior to implementation.
By delegating to sub agents (eg for brainstorming or review), you can break out of local maxima while not using quite as many more tokens.
Additionally, when doing any sort of complex task, I do research -> plan -> implement -> review, clearing context after each stage. In that case, would I want to make 7x research docs, 7x plans, etc.? probably not. Instead, a more prudent use of tokens might be to have Claude do research+planning, and have Codex do a review of that plan prior to implementation.
Yes, understandable.
The question is which multi-agent architecture, hierarchical or competitive, yields the best results under some task/time/cost constraints.
In general, our sense is that competitive is better when you want breadth and uncorrelated solutions. Or when the failure modes across agents are unknown (which is always, right now, but may not be true forever).
The question is which multi-agent architecture, hierarchical or competitive, yields the best results under some task/time/cost constraints.
In general, our sense is that competitive is better when you want breadth and uncorrelated solutions. Or when the failure modes across agents are unknown (which is always, right now, but may not be true forever).
> straight 7x-ing token costs
You are probably right, but my work pays for as many tokens as I want, which opens up a bunch of tactics that otherwise would be untenable.
I stick with sub-agent approaches outside of work for this reason though, which is more than fair a point
You are probably right, but my work pays for as many tokens as I want, which opens up a bunch of tactics that otherwise would be untenable.
I stick with sub-agent approaches outside of work for this reason though, which is more than fair a point
Maybe an evolution based approach does make sense. 3x instead, and over time drop the least effective agents, replacing them with even random choices.
Edit: And this is why you should read the article before you post!
Edit: And this is why you should read the article before you post!
Yes indeed, you get a big lift out of running just the few top agents.
We run big ensembles because we are doing a lot of analysis over the system etc
We run big ensembles because we are doing a lot of analysis over the system etc
Any suggestions for «orchestrating» this type of experiment?
And how does one compare the results in a way that is easy to parse? 7 models producing 1 PR each is one way, but it doesn’t feel very easy to compare such.
And how does one compare the results in a way that is easy to parse? 7 models producing 1 PR each is one way, but it doesn’t feel very easy to compare such.
https://github.com/voratiq/voratiq
For comparison, there's a `review` command that launches a sandboxed agent to review a given run and rank the various implementations. We usually run 1–3 review agents, pull the top 3 diffs, and do manual review from there.
We're working on better automation for this step right now.
For comparison, there's a `review` command that launches a sandboxed agent to review a given run and rank the various implementations. We usually run 1–3 review agents, pull the top 3 diffs, and do manual review from there.
We're working on better automation for this step right now.
If you view LLM driven dev as a kind of evolutionary process rather than an engineering process (at the level of a single LLM output) then this makes a lot of sense. You're widening the population from which you select for fitness.
This was exactly the kernel of the idea :)
Ah interesting. Thank you very much for sharing the illuminating results.
One question I had - was the judgement blinded? Did judges know which models produced which output?
One question I had - was the judgement blinded? Did judges know which models produced which output?
It was not, the agent id is not overt but can be found via the workspace filepath.
But that is a good point. Perhaps it should be mapped to something unidentifiable.
But that is a good point. Perhaps it should be mapped to something unidentifiable.
Ah ok. If you do run it again that would be a worthwhile change. I know I personally have biases about models and I have seen others commenting the same - it seems likely it would skew the results at least a little.
Nonetheless you've convinced me to try an even wider variety of models, thanks!
In fact, this makes me think I should add this as a feature to my AI dev tooling - compare responses side by side and pick the best one.
Nonetheless you've convinced me to try an even wider variety of models, thanks!
In fact, this makes me think I should add this as a feature to my AI dev tooling - compare responses side by side and pick the best one.
Is this going to get my Claude subscription cancelled if I run it with a claude backend, given that it's orchestrating the CLI? I am still a little unclear about the boundaries of that.
to demonstrate this you measure the compute / cost of running and human-verifying the output.
the statistics provided don't at all exclude the possibility that instead of giving the top 5 models each a single opportunity to propose a solution, it may be more efficient to give the 5 opportunities to solve the problem to the best scoring model:
at 24% win rate the null hypothesis (what a usual researcher ought to predict based on common sense) would be that the probability of a loss is 76%, and the probability that it loses N times is (0.76 ^ N), and so the probability of it winning in N attempts is ( 1 - (0.76 ^ N ) ).
So consulting the best scoring model twice (2 x top-1) I would expect: 42.24% better than the giving the 2 top scoring models each a single try ( 1 x top-2 ) as that resulted in 35%
Same for 3x top-1 vs 1x top-3: 56.10% vs 51%
Same for 4x top-1 vs 1x top-4: 66.63% vs 66%
Same for 5x top-1 vs 1x top-5: 74.64% vs 73%
Same for 6x top-1 vs 1x top-6: 80.73% vs 83%
Same for 7x top-1 vs 1x top-7: 85.35% vs 90%
Same for 8x top-1 vs 1x top-8: 88.87% vs 95%
I can't read the numerical error bars on the top-1 model win rate, we could calculate a likelihood from to see if the deviation is statistically significant.