Left to Right Programming(graic.net)

447 pointsby graichá 11 meses357 comments

https://graic.net/p/left-to-right-programming

371 comments

juancnhá 11 meses

SQL shows it's age by having exactly the same problem.

Queries should start by the `FROM` clause, that way which entities are involved can be quickly resolved and a smart editor can aid you in writing a sensible query faster.

The order should be FROM -> SELECT -> WHERE, since SELECT commonly gives names to columns, which WHERE will reference.

You could even avoid crap like `SELECT * FROM table`, and just write `FROM table` and have the select clause implied.

Never mind me, I'm just an old man with a grudge, I'll go back to my cave...

dleeftinkhá 11 meses

PSQL (and PRQL) use this ordering, and a similar pipe/arrow notation has recently been added to BigQuery.

Check out the DuckDB community extensions:

[0]: https://duckdb.org/community_extensions/extensions/psql.html

[1]: https://duckdb.org/community_extensions/extensions/prql.html

geysersamhá 11 meses

In duckdb you can also start with `FROM .. SELECT ..` without using the PSQL extension.

But I haven't found a good editor plugin that is actually able to use that information to do completions :/ If anyone knows I'd be happy to hear it

howardbannisterhá 11 meses

The duckdb local ui does that I believe:

duckdb -ui

More here: https://duckdb.org/2025/03/12/duckdb-ui.html

account42há 11 meses

An unfortunate name when PSQL is already a commonly used shorthand (including the official client command name) for a competing SQL-based database engine.

paradox460há 11 meses

And in elixir land we've had similar pipes and composition through ecto, for the major rdbms

mikeenhá 11 meses

Google actually started pipe syntax, https://news.ycombinator.com/item?id=41338877

Now it is supported by DuckDB, BigQuery, Spark SQL, Firebolt, and probably others. I use it more and more (with BigQuery).

sgarlandhá 11 meses

It's written that way because it stems from relational algebra, in which the projection is typically (always?) written first.

>The order should be FROM -> SELECT -> WHERE, since SELECT commonly gives names to columns, which WHERE will reference.

Per the SQL standard, you can't use column aliases in WHERE clauses, because the selection (again, relational algebra) occurs before the projection.

> You could even avoid crap like `SELECT * FROM table`, and just write `FROM table` and have the select clause implied.

Tbf, in MySQL 8 you can use `TABLE <table>`, which is an alias for `SELECT * FROM <table>`.

balfirevichá 11 meses

> It's written that way because it stems from relational algebra, in which the projection is typically (always?) written first.

It's inspired by a mish-mash of both relational algebra and relational calculus, but the reason why SELECT comes first is because authors wanted it to read like English (it was originally called Structured English Query Language).

You can write the relational algebra operators in any order you want to get the result you want.

9rxhá 11 meses

> You can write the relational algebra operators in any order you want

Ultimately, yes, you can express relational algebra in any notation that gets the point across, but the parent is right that

   π₁(R)

is what is commonly used.

   (R)π₁

not so much. Even Codd himself used the former notation style in his papers, even though he settled on putting the relation first in his query language.

balfirevichá 11 meses

My impression was the parent poster was talking about order of operations like projection and selection, where you might more commonly write:

Π(σ(R)) instead of σ(Π(R))

and not about whether relational algebra uses prefix or postfix notation:

Π(σ(R)) vs. R > σ > Π

SQL's WHERE statement (and others) works totally differently from SELECT in that regard, so it doesn't make much sense to say that "SELECT comes first because relational algebra".

9rxhá 11 meses

Interestingly, the inventor of relational algebra for database management put the "FROM" first in his query language: https://dl.acm.org/doi/pdf/10.1145/1734714.1734718

sgarlandhá 11 meses

What section did you see this? I see GET (i.e. SELECT) first.

9rxhá 11 meses

Section 3.3. "SELECT" only comes first if you omit "FROM". In SQL, if it allowed, that would be something like: `SELECT table.column`.

sgarlandhá 11 meses

Tuple Variables and their Range?

I don’t think I see what you see. From 3.3:

    RANGE PART P
    GET W (P.P#,P.PNAME,P.QOH):(P.QOH<25)

9rxhá 11 meses

Which approximately translates to:

   SELECT p.pnum, p.pname, p.qoh FROM part p WHERE p.qoh < 25

But a more direct translation would look something like:

   FROM part p SELECT p.pnum, p.pname, p.qoh WHERE p.qoh < 25

Even closer would be:

   FROM part p; SELECT p.pnum, p.pname, p.qoh WHERE p.qoh < 25

Of course they are different languages so we can only take things so far, but the pertinent bit is that the range specifier is declared first in ALPHA, whereas it is declared later, after the projection is defined, in SQL.

mamcxhá 11 meses

> It's written that way because it stems from relational algebra,

A common misconception (that SQL is a realization of RA instead of barely based on it).

In RA, is in fact `Relation > Operator`

sgarlandhá 11 meses

Unless I am grossly misunderstanding your notation, I have always seen RA written with the operator first. Some examples:

https://cs186berkeley.net/notes/note6/

https://web.wlu.ca/science/physcomp/ikotsireas/CP465/W1-Intr...

https://home.adelphi.edu/~siegfried/cs443/443l9.pdf

[deleted]há 11 meses

mamcxhá 11 meses

You are correct in that is the notation used, but that is not how it goes internally!

bazoom42há 11 meses

> It's written that way because it stems from relational algebra

More likely because this order is closer to typical English sentence structure. SQL was designed to look like English, not relational algebra.

marzellhá 11 meses

> Per the SQL standard, you can't use column aliases in WHERE clauses, because the selection (again, relational algebra) occurs before the projection.

Except this works in most major vendor SQL implementations. And they all support relation aliases in SELECT... Seems the standards have long fell behind actual implementations.

sgarlandhá 11 meses

To clarify, I mean you can’t do this:

    SELECT id AS foo
    FROM MyTable
    WHERE foo = 1;

Similarly, you can’t do this:

    SELECT id
    FROM MyTable
    WHERE id = MAX(id);

Because in both cases, when the WHERE predicate is being executed, the engine doesn’t yet know what you’re asking it to find - for the former, SELECT hasn’t yet been called, so the alias isn’t applied; for the latter, the aggregation happens after filtering, so it can’t know what that maximum value is.

You can of course alias columns for SELECT however you’d like, and can also use those aliases in ORDER BY. You can also trivially refactor the above examples to use subqueries or CTEs to accomplish the goal.

marzellhá 11 meses

You absolutely can in many engines, for instance in Snowflake... with the small exception that in all supporting engines you actually need to use HAVING instead of WHERE in your second example (because it compares an aggregation, otherwise WHERE is fine).

You can also use "correlated column aliases" (I can't recall the proper name) i.e.

    SELECT
        id AS foo,
        foo || '_1' as foo_n,
        right(foo_n, 1) as foo_ordinal
    FROM MyTable
    WHERE foo = 1;

Again, if this isn't all part of SQL standards, the reality is that a lot of engines have semi-standard (sometimes very proprietary too) ways of handling these now common patterns. For real-world use cases, the standards are unfortunately becoming increasingly irrelevant. I think it would be better in the long term to use standards, but if they can't keep up with actual usage then they will just get ignored.

jodrellblankhá 11 meses

You apparently can in SQLIte though: https://sqlfiddle.com/sqlite/online-compiler and query:

    SELECT LOWER(Name) as LName FROM Product where LName like '%frame%';

stonemetal12há 11 meses

>Per the SQL standard, you can't use column aliases in WHERE clauses, because the selection (again, relational algebra) occurs before the projection.

Don't blame the math for sloppy implementation. Nothing in the math suggest where aliases should be specified. Don't get me wrong it is a coinvent, logical place to put them, but as you say it rather limits their use, and could have been done better.

kerkeslagerhá 11 meses

> It's written that way because it stems from relational algebra, in which the projection is typically (always?) written first.

Okay, so what?

We're not obligated to emulate the notational norms of our source material, and it is often bad to do so when context changes.

sgarlandhá 11 meses

I was explaining why it is the way that it is. If you'd like your own version of a parser, here's Postgres' [0]. Personally, I really like SQL's syntax and find that it makes sense when reading it.

[0]: https://github.com/postgres/postgres/tree/master/src/backend...

jagged-chiselhá 11 meses

There was not argument about how much sense it makes. There was an argument for improving readability by placing the table names first.

Lots of people “like” things because they are familiar with them. And that’s a fine enough reason. But if you step out of your zone of familiarity, can you find improvements? Are you willing to forgo any prejudice you may possess to evaluate other suggestions?

Just a little willingness to see another perspective is all anyone asks.

9rxhá 11 meses

> If you'd like your own version of a parser, here's Postgres' [0].

Funnily enough, if you pull up a version of Postgres' parser prior to the 1995 release, you'll find that it puts the relation first.

kerkeslagerhá 11 meses

> I was explaining why it is the way that it is.

No one was confused what you were doing.

I'm saying the historical reason for why it is the way it is, doesn't matter. I would hope we design our languages to be maximally clear and useful, not to be maximally full of historical cruft.

There's no accounting for taste, so you're welcome to like whatever you like, but I don't think you liking a backward syntax is particularly persuasive. It sounds more like you're just used to it than that you see any actual benefits to it.

Arnavionhá 11 meses

Yes, C#'s DSL that compiles to SQL (LINQ-to-SQL) does the same thing, `from` before the other clauses, for the same reason that it allows the IDE code completion to offer fields while typing the other clauses.

pjmlphá 11 meses

Kusto, the Azure query language for data analysis uses that form with piping as well.

https://learn.microsoft.com/en-us/kusto/query/?view=microsof...

Also the LINQ approach in .NET.

I do agree, that is about time that SQL could have a variant starting with FROM, and it shouldn't be that hard to support that, it feels like unwillingness to improve the experience.

benrutterhá 11 meses

Kusto is so much vetter than it has any right to be! Normally I'd run a mile at a cloud provider specific programming language that can't ve used elsewhere, but it really is quite nice! (there are some wierd quirks, but a tonne less than I'd have thought)

0x00C0FFEEhá 11 meses

I love working with KQL, it’s a very expressive query language.

lackoftacticshá 11 meses

This was a historical decision because SQL is a declarative language. I was confused for too long, I want to admit, about the SQL order: FROM/JOIN → WHERE → GROUP BY → HAVING → SELECT → ORDER BY → LIMIT

As a self-taught developer, I didn't know what I was missing, but now the mechanics seem clear, and if somebody really needs to handle SELECT with given names, then he should probably use CTE:

WITH src AS (SELECT * FROM sales), proj AS (SELECT customer_id, total_price AS total FROM src), filt AS (SELECT * FROM proj WHERE total > 100) SELECT * FROM filt;

balfirevichá 11 meses

> This was a historical decision because SQL is a declarative language

It would be equally declarative if FROM came first.

[deleted]há 11 meses

lackoftacticshá 11 meses

You are right to point this out, fair point

9rxhá 11 meses

> This was a historical decision because SQL is a declarative language.

What do you mean? Both ALPHA (the godfather declarative database language created by Codd himself) and QUEL, both of which inspired SQL, put "FROM" first. Fun fact: SQL was originally known as SEQUEL, which was intended to be a wordplay on being a followup to QUEL.

Another commenter makes a good case that SQL ended up that way because it was trying to capture relational algebra notation (i.e. π₁(R), where π~select, ₁~column, R~table). Yet relational algebra is procedural, not declarative. Relational calculus is the declarative branch.

Although the most likely explanation remains simply that SEQUEL, in addition to being fun wordplay, also stood for Structured English Query Language. In English, we're more likely to say "select the bottle from the fridge", rather than "from the fridge, select the bottle". Neither form precludes declarative use.

shadowgovthá 11 meses

It's true. I call authoring SQL "holographic programming" because any change I want to make frequently implies a change to the top and bottom of the query too; there's almost never a localized change.

C++ has this issue too due to the split between header declarations and implementations. Change a function name? You're updating it in the implementation file, and the header file, and then you can start wondering if there are callers that need to be updated also. Then you add in templates and the situation becomes even more fun (does this code live in a .cc file? An .h file? Oh, is your firm one of the ones that does .hh files and/or .hpp files also? Have fun with that).

dotancohenhá 11 meses

  > The order should be FROM -> SELECT -> WHERE, since SELECT commonly gives names to columns, which WHERE will reference.

Internally, most SQL engines actually process the clauses in the order FROM -> WHERE -> SELECT. This is why column aliases (defined in SELECT) work in the GROUP BY, HAVING and ORDER BY clauses, but not in the WHERE clause.

marcosdumayhá 11 meses

The order should be starting on FROM, followed by any sequences of whatever clauses (except for FROM), always creating an intermediary result-set.

FROM table -- equivalent to today's select * from table

SELECT a, 1 as b, c, d -- equivalent to select ... from table

WHERE a in (1, 2, 3) -- the above with the where

GROUP BY c -- the above with the group by

WHERE sum(d) > 100 -- the above with having sum(d) > 100

SELECT count(a distinct) qt_a, sum(b) as count, sum(d) total_d -- the above being a sub-query this selects from

Pxtlhá 11 meses

My other big dream would be allowing multiple WHERE clauses that would be semantically ANDed together because that's what would happen if you filtered a result set twice.

marcosdumayhá 11 meses

Yes, by whatever clauses I also meant repeating ones.

SQL has a conceptual issue with repeating group by clauses, so maybe not that one (or maybe we should fix the conceptual issues). But any other, including the limiting and offset ones.

kerkeslagerhá 11 meses

Yes! I've always been annoyed by this.

AdieuToLogichá 11 meses

How would this approach support SQL constructs such as the HAVING[0] clause? Or is that what you meant by:

  WHERE sum(d) > 100 -- the above with having sum(d) > 100

0 - https://www.w3schools.com/sql/sql_having.asp

sgarlandhá 11 meses

> always creating an intermediary result-set

You want the DB to first run SELECT * FROM <table>, and then start operating on that?

kerkeslagerhá 11 meses

Obviously not, and bringing this up as if it's a gotcha just shows you aren't keeping up with the conversation. Try less to correct people and more to understand people.

It's about how humans think about it, not about how the computer executes it.

sgarlandhá 11 meses

How else do you read what they wrote?

eyelidlessnesshá 11 meses

I read it as describing their preferred mental model for declaring a result set, which is different from describing their preferred behavior to produce it. This seems clear to me in wording and context; it’s also broadly consistent with how SQL is understood, and how it is generally implemented.

[deleted]há 11 meses

dragonwriterhá 11 meses

Presumably, the intermediate result sets would necessary be materialized, only logical.

pzmarzlyhá 11 meses

You may find PRQL interesting. https://prql-lang.org/

layer8há 11 meses

While I agree, some SQL editors do provide code completion for the SELECT clause if you type the FROM clause first.

pjmlphá 11 meses

That is my trick as well, but feels backwards, by now there could be a variant of SQL supporting FROM first.

benhurmarcelhá 11 meses

DuckDB accepts just that: https://duckdb.org/docs/stable/sql/query_syntax/from.html#fr...

qskousenhá 11 meses

Off topic, but I really wish DuckDB's FTS extension could add to the index as the table is added to. It's the only thing keeping me on sqlite for a project.

ARandomerDudehá 11 meses

I've always liked the `select...from` order because it helps me understand the goal before reading the logic. In other words, I want to end up with this, and here's how I want to go about getting it.

de6u99erhá 11 meses

You can always start with the FROM clause and then add the SELECT clause above it if it's a out auto-,completion.

I usually start with: ``` select * from <table> as <alias> limit 5 ```

0x696C6961há 11 meses

It doesn't seem like it would be all that difficult to allow that form in a backwards compatible way. Why hasn't this happened?

orthoxeroxhá 11 meses

Because SQL is a whole language family of separate languages grudgingly adopting new features introduced by the notoriously slow standartization committee.

BigQuery SQL and Spark SQL (and probably some others) have adopted pipelined syntax, DuckDB SQL simply allows you to write the query FROM-first.

juancnhá 11 meses

Not sure. It seems a fairly basic syntax change and it could even be easily made backwards compatible.

Now we need to get the ANSI SQL committee to standardize it ANSI SQL 2027 or some such.

taerichá 11 meses

My main caveat here, is that often the person starting a select knows what they want to select before they know where to select it from. To that end, having autocomplete for the sources of columns is far far more useful than autocomplete for columns from a source.

I will also hazard a guess that the total number of columns most people would need autocomplete for are rather limited? Such that you can almost certainly just tab complete for all columns, if that is what you really want/need. The few of us that are working with large databases probably have a set of views that should encompass most of what we would reasonably be able to get from the database in a query.

jayd16há 11 meses

Seems nonsensical. Column names have no meaning without the table. Table is the object, columns are the properties. What language goes Property.Object? All popular languages have this wrong?

kragenhá 11 meses

Anytime you store a single property for all objects in an array or hash table, so, Fortran, BASIC, APL, Numpy, R, awk, and sometimes Perl. Parallel arrays are out of style but certainly not unheard of. They're the hot new thing in games programming, under the name "entity-component-system".

Even C when `property` is computed rather than materialized. And CLOS even uses that syntax for method invocation.

The only language I can think of that uses field(record) syntax for record field access is AT&T-syntax assembly.

ajuchá 11 meses

When languages use order property, object - it's usually because they treat the properties as functions.

name(object) makes as much sense as object.name

taerichá 11 meses

I'm assuming you are largely just not thinking this one through? We are not modeling the domain, we are describing some data we want to select. Without knowing how it is modeled, I can give a brief "top line" for expected select statements on many data models. "I want average_weather, year, zip_code", "I want year, college_name, degree_name, median_graduate_salary, mean_graduate_salary", "..."

I don't think it is tough to describe many many reports of data that you would want in this way. Is it enough for you to flat out get the answer? No, of course not. But nor is it enough to just start all queries at what possible tables you could use as a starting point.

debazelhá 11 meses

How would you even know it's possible get the data before you've chosen a table?

Your example is also not a complete select statement, you would need to go back and add the actual aggregate functions, and oops the zip_code column was actually called zip, so we need to remap that as well. You can almost never finish a select statement before you have inspected the tables, so why not just start there immediately?

taerichá 11 meses

Often times you don't know it is possible to get some data without consulting the table? Worse, you probably need to consult the views that have been made by any supporting DB team before you go off and build your own rollups. Unless you like not taking advantage of any aggregate jobs that are running nightly for reporting.

And to be clear, I'm all for complaining about the order of a select statement, to a very large degree. It is done in such a way that you have to jump back and forth as you are constructing the full query. That can feel a bit painful.

However, I don't know that it is just the SELECT before FROM that causes this jumping back and forth and fully expect that you would jump around a fair bit even with the FROM first. More, if I am ever reworking a query that the system is running, I treat the SELECT as the contract to the application, not the FROM.

There is a bit of "you should know the database before you can expect to send off a good query", but that really cuts to any side of this debate? How do you know the tables you want so well, but you don't know the columns you are going to ask for?

debazelhá 11 meses

> How do you know the tables you want so well, but you don't know the columns you are going to ask for?

Simply because there are a lot more columns than there are tables.

Of course, I sometimes forget the exact table name as well. However, this is mostly not an issue as the IDE knows all table names before anything has been entered. By simply entering `FROM user`, the autocomplete will list all tables that contain `user`, and I can complete it from there. I cannot do the same with the column selection unless I first write the FROM part. And even if I do know exactly which columns and tables I want I would still want autocomplete to work when creating the SELECT statement. Rather than typing `zip_code`, I can most likely just type `z<TAB>`.

That is why 99% of my select queries start as `SELECT * FROM mytable`, and then I go back to fill in the select statement. And it's not just me, all colleagues I've worked with does exact same thing.

For larger, more complicated queries, you'll have to go back and forth a lot as you join tables together, that is unavoidable, but 80-90% of my queries could be finished in one go if the FROM part came first.

taerichá 11 meses

But "more columns than there are tables" is also why I put the thing about, "the total number of columns most people would need autocomplete for are rather limited?" I could see an argument on how this mattered back at the origin of SQL, but today? It is entirely conceivable that you can autocomplete the column names with it updating the from as necessary for the columns you have selected. You could then tab to the from and pick alternative tables with natural joins prefilled between the tables. With very minimum effort.

I actually seem to recall this was done in some of the early dedicated SQL tools. It is rather amusing how much we handicap ourselves by not using some things older tools built.

jimbokunhá 11 meses

How did you know it was zip_code and not ZipCode?

Maybe in this case you know the same naming conventions are enforced across all tables. But in general it’s difficult to know the exact column name without looking it up first.

lelanthranhá 11 meses

> How did you know it was zip_code and not ZipCode?

I think you're missing the point; you start off with your goal, regardless of the column name. No one has the goal "we want columsn from this specific table", it's always "we want these columns in the final output".

prollingshá 11 meses

Right, but which columns? The goal absolutely IS to select columns from a table. ie. my goal is not to select created_at, my goal is to select Foo's created_at.

lelanthranhá 11 meses

> The goal absolutely IS to select columns from a table.

No. The goal is to have an output column $FOO, where $FOO is meaningful and might not even be in the database in the first place.

> my goal is not to select created_at, my goal is to select Foo's created_at.

Then your goal is to get a value out of a specific table, namely `Foo`, presumably because the end-user wants to see some value in the results.

The end-user getting the value has neither an interest in nor knowledge of your schema. `Foo.created_at` is no more meaningful in the result sets than an unadorned `created_at`.

For this specific example, the end-user might want a column in the output called `age` (if it came from an inventory table`, or `duration` (if it came from a metrics tables), or perhaps `expiry` (if it is a table containing perishable stock). These are all a column in a Foo table, but the request that caused you to write the query in the first place does not mention table at all.

You get their requirement as either `age`, `duration`, `expiry` or similar. That is what you are starting from: "a need for a specific piece of data". You are not starting from "a need from a specific table", because the information needed is coming from someone who neither knows nor cares what your schema looks like.

jimbokunhá 11 meses

I can’t think of an example where I knew the columns I wanted to select before I knew which table I wanted to select them from.

necovekhá 11 meses

Did you ever not do things like

  select name, min(price) from product join product_price on product.id = product_price.product_id

where you start with "I need a product name and minimum price" before thinking about where they come from?

The more one uses SQL to filter for, the more you'll think about what you want to achieve vs how (which comes after): in a sense, the SELECT is your function return type declaration, and I frequently start my functions with the declaration.

masklinnhá 11 meses

> where you start with "I need a product name and minimum price" before thinking about where they come from?

Sure, and pretty much every time the names I wrote up were not the ones in the table so that was a complete waste of time.

> the SELECT is your function return type declaration

That might be true if “select” only contained aliases, bur that’s not the case at all, so what it is is complete nonsense.

taerichá 11 meses

This presumes that you never pick the wrong table, as well? :D

My argument would be largely that you are doing a search of all of the tables for the columns that you want. With having to know the way to join the necessary tables along the way.

And I want to be clear, I don't think this is necessarily "the way." I more think that it is almost certainly an iterative process that can be started at either place, and will require bouncing between the two quite often.

For instance, yes, you can autocomplete column names from tables that you have put in the from. What if you can't find the column you are anticipating there? Go back and rescan the table names hoping you can guess which table should have the column you want? Then go back to autocomplete for columns to see if expected value appears? Or go to a bit more of a global search for columns?

Either way should be fine.

jimbokunhá 11 meses

Nope.

Zedseayouhá 11 meses

Can you help me understand this situation? Almost always what I want to select is downstream of what I am selecting from, I can't write anything in SELECT until i understand the structure/columns available in FROM.

taerichá 11 meses

"I want 'first_name, last_name, and average(grade)' for my report." That is easy enough to state without knowing anything about how the data is normalized.

Back when I worked to support a data science team, I actually remember taking some of their queries and stripping everything but the select so that I could see what they were trying to do and I could add in the correct parts of the rest.

mamcxhá 11 meses

Even assuming that this is plausible way a user could think about it (that can be understood) it shows why is bad

Think: I have 20 tables with the column `id`

"I want 'id,id,id'"

is bad UX, and is what here is being argued, then when the syntax guide you: "I want 'FROM a: id'" is better

taerichá 11 meses

I don't think anyone would ever say they want "id, id, id"? They would say they want "customer_id, order_id, item_id" or some such. You would then probably say, "we just use 'id' for the id of every item..." but many places that I've worked actually explicitly didn't do that for essentially this reason. Natural joins on "foo_id" "just work" if you don't give every table the same "id" column.

mamcxhá 11 meses

That is what the syntax allow. And is the user that need to "patch" the meaning using other things like alias, renames or hopefully, proper names for fields (by the way "id, id, id" happens a lot in the wild!)

Is like "to control mutation I only need to append "mut" to the name!

necovekhá 11 meses

Current SELECT syntax does allow one to "SELECT user.id as user_id, product.id as product_id..." which can then even autocomplete the FROM for you from your query "declaration" (a-la function declaration, in particular its return type).

jayd16há 11 meses

This assumes I have all the column memorized but not all the tables?

Even in your example, first and last could refer to student or teacher. But presumably you know you're looking for student data before knowing the exact columns.

taerichá 11 meses

No, this assumes you know what you want for a query. Which, seems largely fair?

Like, how would you send this question to someone? Or how would you expect it to be sent to you? If your boss doesn't tell you from what table they want some data, do you just not answer?

And sure, there could be ambiguities here. But these are not really fixed by listing the sources first? You would almost certainly need to augment the select to give the columns names that disambiguate for their uses. For example, when you want the teacher and the student names, both.

And this is ignoring more complications you get from normalized data that is just flat out hard to deal with. I want a teacher/student combination, but only for this specific class and term, as an example. Whether you start the from at the student, the class, or the term rosters feels somewhat immaterial to how you want to pull all of that data together for why ever you are querying it.

jayd16há 11 meses

If my boss asks me for a zip code, I'm going to ask "for what?"

If they ask for "address for a customer" I can go to the customer table and look up what FKs are relevant and collect all possible data and then narrow down from there.

taerichá 11 meses

I'd assume they would ask for "aggregate sales by month to zip codes," or some such. Which, you'd probably get from a reporting table, and not bother trying to do the manual aggregate over transactional data. (That is, OLAP versus OLTP is a very real divide that you can't wave away.)

Realistically, I strongly suspect you could take this argument either direction. If you have someone making a query where they are having to ask "what all tables could I start from?" you are in for some pain. Often the same data is reachable from many tables, and you almost certainly have reasons for taking certain paths to get to it. Similarly, if they should want "person_name", heaven help them.

Such that, can you contrive scenarios where it makes sense to start the query from the from clause? Sure. My point is more that you almost certainly have the entire query conceptualized in your mind as you start. You might not remember all of the details on how some things are named, but the overall picture is there. Question then comes down to if one way is more efficient than the other? I have some caveats that this is really a thing hindered by the order of the query. We don't have data, of course, and are arguing based on some ideas that we have brought with us.

So, would I be upset if the order was reversed? Not at all. I just don't expect that would actually help much. My memory is using query builders in the past where I would search for "all tables that have customer_id and order_id in them" and then, "which table has customer_id and customer_address" and then... It was rarely (ever?) the name of the table that helped me know which one to use. Rather, I needed the ones with the columns I was interested in.

shkkmohá 11 meses

Your approach only works with massive assumptions about the structure of the data or a very simplistic data structure.

SELECT statments don't just use table names, they can use aliases for those table names, views, subqueries, etc.

The FROM / JOIN blocks are where the structure of the data your are selecting from is defined. You should not assume you understand what a SELECT statement means until you have read those blocks.

necovekhá 11 meses

As GP said, you can take this both ways.

I can define the return format of my query in the SELECT statement, then adapt the data structure in the FROM block using subselects, aliases etc — all to give me the shape desired for the query.

If you've ever done complex querying with SQL, you'd know that you'd go back and forth on all parts of the query to get it right unless you knew the relations by heart, regardless of the order (sometimes you'll have to rework the FROM because you changed the SELECT is the point).

shkkmohá 11 meses

> As GP said, you can take this both ways.

You can, but one of those ways is objectively worse for the reasons explained in this thread and in the article.

When you have to read a query out of order to understand it then something is wrong with the structure of the query language.

Izkatahá 11 meses

And the objectively worst way is to put the SELECT in the middle, because it ignores the relationship between the query and the rest of the code that interacts with it, making it more difficult to read - and reading the code is done a lot more than writing the code.

Izkatahá 11 meses

Likewise when skimming code, having the attributes on the left and details on the right makes it much easier to see the data flow in the larger program - it's the same order as "var foo = bar()".

cultofmetatronhá 11 meses

ecto's sql dsl basicly fixes this. here's one I just wrote in my codebase

  from(l in Blinq.Reservations.OrderCycleLinks)
    |> join(:left, [l], r in Blinq.Reservations.Reservation, on: l.reservation_id == r.id)
    |> select([l, r], %{
      order_cycle_id: l.order_cycle_id,
      customer_id: r.customer_id
    })
    |> where([l, r], l.order_cycle_id in ^order_cycle_ids and r.assignment_type == :TABLE)
    |> Repo.all()

Ultimatthá 11 meses

WITH and CTEs go some way to help with this, and the majority of queries are a lot better for that.

nurettinhá 11 meses

> Queries should start by the `FROM` clause,

FWIW that is the approach used by LINQ.

sshinehá 11 meses

SELECT ... FROM ... WHERE ...: S Q L

FROM ... SELECT ... WHERE ...: Q S L

delifuehá 11 meses

A nitpick: select doesn't declare fields for where. select declare fields for having. it's the schema that declares fields that can be used in where.

folkravhá 11 meses

I legitimately never even thought of this, and it feels very obvious in retrospect…

danielPort9há 11 meses

Don’t know why python gets so much love. It’s a painful language as soon as more than one person is involved. What the author describes is just the tip of the iceberg

necovekhá 11 meses

The same reason people are not flocking to the Lisps of the world: mathematical rigour and precision does not translate to higher legibility and understandability.

Python's list /dict/set comprehensions are equivalent to typed for loops: where everyone complains about Python being lax with types, it's weird that one statement that guarantees a return type is now the target.

Yet most other languages don't have the "properly ordered" for loop, Rust included (it's not "from iter as var" there either).

It's even funnier when function calling in one language is compared to syntax in another (you can do function calling for everything in most languages, a la Lisp). Esp in the given example for Python: there is functools.map, after all.

jibalhá 11 meses

"the target"? The OP complaint is not that the statement exists, but that the output expression comes before the context that establishes its meaning. This is not just a problem for autocomplete, but people often report difficulties understanding complex comprehensions.

As for comprehensions themselves, ignoring that problem I find them a powerful and concise way to express a collection of computed values when that's possible. And I'm particularly fond of generator expressions (which you didn't mention) ... they often avoid unnecessary auxiliary memory, and cannot be replaced with an inline for loop--only with a generator function with a yield statement.

BTW, I don't understand your comment about types. What's the type of (x for x in foo()) ?

necovekhá 11 meses

That one is a generator[Any], and for others it could be set[Any], list[Any] or dict[Any]. You obviously don't get embedded type information, but you still do get the encapsulating type, which is better than an untyped for loop :)

I get that it's about how it's structured and ordered, but that is true for the "for..in" loops in every language as well: you first set the variable, and only then get the context — this just follows the same model as the for loops in the language, and it would be weird if it didn't.

jibalhá 11 meses

"that is true for the "for..in" loops in every language as well"

No, not at all. The output expression is arbitrary ... it might be f(x, y, z) where all of those are set later. You're confusing the output expression with the loop variable, which is also stated in the comprehension and may or may not be the same as the output expression or part of it. "The same model as the for loops in the language", where the language includes Python, is the comprehension with the output expression moved from the beginning to the end. e.g., (bar(x) for x in foo()) is `for x in foo(): bar(x)`. More concretely: lst = [bar(x) for x in foo()] is functionally equivalent to lst = []; for x in foo(): lst.append(bar(x))

Again, "the output expression comes before the context that establishes its meaning." ... I thought that would be clear as day to anyone who is actually familiar with Python comprehensions.

P.S. I'm not going to respond to goalpost moving.

necovekhá 11 meses

Note that I am not disputing the order is "inversed": all I am saying is that there are other common language features in most languages where things don't flow the same way, yet nobody finds it a huge problem.

It's like discussion of RPN or infix for calculations: both do the job, one is more rigorous and clear with no grouping/parentheses, yet we manage just fine with infix operators in our programming languages (or maybe not, perhaps all bugs are due to this? :)).

necovekhá 11 meses

These are different points.

Just like you state a variable and some operations on it early in a comprehension, you do the same in a for loop: you don't know the type of it.

As you are typing the for loop in, your IDE does not know what is coming in as a context being iterated over to auto-complete, for instance (eg. imagine iterating over tuples with "for k, v in some_pairs:" — your editor does not even know if unpacking is possible).

Basically, what I am saying is that comprehensions are similarly "bad" as for loops, except they are more powerful and allow more expression types early.

C/C++ allow even crazier stuff in the "variable's" place in a for loop. Rust allows patterns, etc.

Typing is mostly a nice addendum I mentioned, that's not the core of my point.

ChadNauseamhá 11 meses

> Yet most other languages don't have the "properly ordered" for loop, Rust included (it's not "from iter as var" there either).

The relative order of the variable being iterated on and the loop variable name is not relevant to OP's complaint. OP only requires that the expression which uses the loop variable comes after both, which is the case in Rust.

shadowgovthá 11 meses

This hasn't been my experience, but we use the Google style guide, linters, and static type verification to cut down on the number of options for how to write the program. Python has definitely strayed from its "one right way to do a thing" roots, but in the set of languages I use regularly it gives about the same amount of issues as JavaScript (and far, far less than C++) regarding having to deal with quirks that vary from user to user.

jibalhá 11 meses

Failure to understand something is not a virtue. That it does get a lot of love strongly suggests that there are reasons for that. Of course it has flaws, but that alone doesn't tell us anything; only comparisons do. Create a comprehensive pro/con list and see how it fares. Then compare that to pro/con lists for other languages.

xelxebarhá 11 meses

> That it does get a lot of love strongly suggests that there are reasons for that.

Reasons, sure, but whether those reasons correlate with things that matter is a different question altogether.

Python has a really strong on-ramp and, these days, lots of network effects that make it a common default choice, like Java but for individual projects. The rub is that those same properties—ones that make a language or codebase friendly to beginners—also add friction to expert usage and work.

> Failure to understand something is not a virtue.

This is what I want to say to all the Bash-haters that knee-jerk a "you should use a real language like Python" in the comments to every article that shows any Bash at all. It's a pet peeve of mine.

pnt12há 11 meses

I'm not a hater, but also not the biggest fan of bash. What do you consider its pros and cons?

Pros: easy to interact with different tools, included in many Unix OSs, battle tested.

Cons: complex stuff gets messy, with weird syntax, hard to do logic, hard to escape everything correctly

xelxebarhá 11 meses

I think you did a good job delineating top complaints people have about shell, but I have to reject the pro/con framing.

Shell operates quite naturally under stream-oriented data-centric design patterns. But that's an architectural familiar to almost nobody in our OOP- and FP-happy industry these days. Try using Python like a relational database language (e.g. SQL), and complex stuff gets messy, the syntax starts feeling hostile, logic becomes obscure, etc. The purported ickyness of shell stems not from shell per se but from trying to force it into a foreign design space.

Principles that work well with shell: Heavily normalize your data; Organize it into line-oriented tables with whitespace-separated fields; Use the filesystem as a blob store; Filenames can be structured data as well; positional parameters form a bona fide list.

> hard to escape everything correctly

IME, all of the really painful escape patterns can always be avoided. You see these a lot when people try to build commands and pass them off to exec. That's mostly unnecessary when you can just shove the arguments in the positional parameters via the set builtin: e.g.

    set -- "$@" --file 'filename with spaces.pdf'
    set -- "$@" 'data|blob with "dangerous" characters'
    set -- "$@" "$etc"
    some_command "$@"

which is functionally equivalent to

    some_command "$@" --file 'filename with spaces.pdf' \
        'data|blob with "dangerous" characters' \
        "$etc"

It also helps to rtfm and internalize the parsing steps that happen between line of input and the eventual execve call.

sophacleshá 11 meses

Pro - there is still not another language (generalizing to "shell" here) that allows you to easily write a series of commands and/or pipelines as concisely and understandably as shell.

This is the biggest reason to use shell - if your task is shaped like a command line session with a bit of looping or a few conditionals, shell is perfect.

If you start nesting loops or conditionals in shell, then start considering another language.

jibalhá 11 meses

"Reasons, sure, but whether those reasons correlate with things that matter is a different question altogether."

Thus my word "suggests". Thus the comprehensive pro/con list.

I'm not here to defend tiresome strawmen.

xelxebarhá 11 meses

It's not so much a matter of exhaustively listing pros and cons, but more a matter of appropriateness to the desired goal or goals IME. I seriously doubt that a comprehensive pro/con list can even be coherent. Is dynamic typing a pro or a con? Depends on to whom and even in what decade you ask. List comprehensions? Interpreted language? First class OOP? Any cost-benefit anaylsis will be highly context-dependent.

> I'm not here to defend tiresome strawmen.

I won't point out that you already tried to (contradiction intended). Perhaps a more interesting discussion would result if we defaulted to a more collaborative[0] stance here?

[0]:https://en.wikipedia.org/wiki/Cooperative_principle

aquariusDuehá 11 meses

I don't have anything useful to add per se but I'd like to thank you for validating my intuition that pros and cons lists not only don't generalize as to be useful universally but also that the more "rigorous" you get with it the whole things evolves into an exercise of ridiculousness.

An example I like to give is the wood chipper. Pros it can do a lot of useful things around the yard (that you can list individually), cons it can chop your arm off. How many pros do you need to overcome that con? Though I'll admit there's a difference between "can" and "will", the latter hinging on improper use.

tl;dr I'm a bit tired with people glorifying a semi-useful cognitive device.

9rxhá 11 meses

> Of course it has flaws, but that alone doesn't tell us anything; only comparisons do.

Comparisons won't tell us anything. If Python were the only programming language in existence, that doesn't imply that it would be loved. Or, if we could establish that Python is the technically worst programming language to ever be created, that doesn't imply that wouldn't be loved. Look at how many people in the world love other people who are by all reasonable measures bad for them (e.g. abusive). Love isn't rational. It is unlikely that it is possible for us to truly understand.

jibalhá 11 meses

> Comparisons won't tell us anything.

If you insist.

> If Python were the only programming language in existence, that doesn't imply that it would be loved.

I'm not here to defend bizarre strawmen.

> It is unlikely that it is possible for us to truly understand.

If you insist.

jibalhá 11 meses

Perhaps I shouldn't have been snide, and should instead have straightforwardly explained how gawdawful their reasoning was.

[deleted]há 11 meses

mb7733há 11 meses

I used to agree with this completely, but type annotations & checking have made it much more reasonable. I still wouldn't choose it for a large project, but types have made it much, much easier to work with others' python code.

Python with strict type checking and its huge stdlib is my favourite scripting language now.

IshKebabhá 11 meses

I agree, it's not too bad if you enable strict Pyright checking in CI, and you use `uv` and you don't care remotely about performance.

That's quite a lot of ifs though. Tbh I haven't found anything significantly better for scripting though. Deno is pretty nice but Typescript really has just as many warts as Python. At least it isn't so dog slow.

Pxtlhá 11 meses

I've pretty much embraced PowerShell for scripting. The language is warty as hell and seems to be entirely made of sharp edges but I've gotten used to it and it does have a lot of excellent ideas.

IshKebabhá 11 meses

Yeah I'm toying with nushell which is like Powershell but with a less offensive syntax.

But when I say "scripting" I don't mean shell scripting. I mean stuff like complex custom build systems or data processing pipelines. I would never do those in any shell language.

Pxtlhá 11 meses

Actually while I use it heavily for shell scripting, it's also also my go-to for python-style scripting too. Mostly because it's the one I'm most familiar with because of professionally doing DevOps on an MS stack with a lot of legacy stuff, but still:

It's just object-y enough to be excellent at filtering and shunting and translating records from API endpoints to CSV files to SQL data rows, etc. I'm not sure I'd recommend it to anybody to pick up because of all the sharp ends (eg it uses Javascript falseyness except SQL NULL has the ADO.Net "DBNull" which isn't falsey) but because I'm so familiar with it I find it quite good at that stuff.

As much as people bag on the syntax (like the operators all starting with hyphen, and all the .NET functions speak with an accent), the real problem is how many edge-cases are in there, like strange behaviors of the error stream, overcomplicated scope rules, FileSystem providers for the registry and SQL server and other objects no reasonable person would ever want to use as a "file", empty-array objects getting silently converted into null, etc.

instig007há 11 meses

> Python with strict type checking and its huge stdlib is my favourite scripting language now.

It's time to try Scala 3 with Java libs' inbound interop: https://docs.scala-lang.org/scala3/book/scala-features.html

williamscaleshá 11 meses

I find myself writing a very simple style of python that avoids list comprehensions and so on when working in a shared code base.

For a language where there is supposed to be only one way to do things, there are an awful lot of ways to do things.

Don’t get me wrong, writing a list comprehension can be very satisfying and golf-y But if there should be one way to do things, they do not belong.

ipythonhá 11 meses

I find list and dict comprehensions are a lot less error prone and more robust than the “manual” alternatives.

I would say unless you have a good reason to do so, features such as meta classes or monkey patching would be top of list to avoid in shared codebases.

zahlmanhá 11 meses

> I find list and dict comprehensions are a lot less error prone and more robust than the “manual” alternatives.

I find them easier to understand and explain, too.

dragonwriterhá 11 meses

> For a language where there is supposed to be only one way to do things

That's not what the Zen says, it says that there should be one -- and preferably only one -- obvious way to do it.

That is, for any given task, it is most important that there is at least one obvious way, but also desirable that there should only be one obvious way, to do it. But there are necessarily going to be multiple ways to do most things, because if there was only one way, most of them for non-trivial tasks would be non-obvious.

The goal of Python was never to be the smallest Turing-complete language, and have no redundancy.

Philpaxhá 11 meses

If I have to write Python like Go, I'd rather just write Go. (Not disagreeing with you, but this is one of many reasons that Python is the least-favourite language that I use on a regular basis.)

SkepticalWhalehá 11 meses

Maybe even painful for one dev once you need dependencies (virtualenv...)

Philpaxhá 11 meses

Thankfully, uv makes this a lot better, but it'll still be a while before that percolates to the entire ecosystem, if ever.

There are real concerns about tying the language's future to a VC-backed project, but at the same time, it's just such an improvement on the state of things that I find it hard not to use.

smillikenhá 11 meses

It's the exceptional codebase that's nice to work with when it gets large and has many contributors. Most won't succeed no matter the language. Language is a factor, but I believe a more important factor is caring a lot.

I'm working on a python codebase for 15 years in a row that's nearing 1 million lines of code. Each year with it is better than the last, to the extent that it's painful to write code in a fresh project without all the libraries and dev tools.

Your experience with Python is valid and I've heard it echoed enough times, and I'd believe it in any language, but my experience encourages me to recommend it. The advice I'd give is to care a lot, review code, and keep investing in improvements and dev tools. Git pre commit hooks (just on changed modules) with ruff, pylint, pyright, isort, unit test execution help a lot for keeping quality up and saving time in code review.

stonemetal12há 11 meses

I love python, as long as were are talking about small teams, short, and short lived programs. The lack of static types makes things quick to implement even if it isn't too sound, and the strong typing keeps you from fucking up too badly. That is why I think it gets so much love in data science, it is great for noodling around while you are trying to figure something out.

On the other hand if you are going to be building something that is going to be long lived, with multiple different teams supporting it over time, and\or larger programs where it all doesn't fit in (human) memory, well then python is going to bite you in the ass.

There isn't a one size fits all programming language, you need at least two. A "soft" language that stays out of your way and lets you figure things out, and a "hard" language that forces the details to be right for long term stability and support.

jbs789há 11 meses

One perspective: I built a business on python. It’s an accessible and powerful tool.

noosphrhá 11 meses

Because everything that tries to fix it is just as painful in different ways.

I've had the displeasure of working in codebases using the style of programming op says is great. It's pretty neat. Until you get a chain 40 deep and you have to debug it. You either have to use language features, like show in pyspark, which don't scale when you need to trace a dozen transformations, or you get back to imperative style loops so you can log what's happening where.

rjbworkhá 11 meses

Debugger tooling is helpful here. Rider's debugger easily shows every intermediate result set in long chained LINQ method call chains.

jimbokunhá 11 meses

Then add some variables for intermediate results.

mrheosuperhá 11 meses

I find python script written by C/C++ dev usually easier to understand than the one written in "Pythonic" style, even if it's longer and more verbose.

dragonwriterhá 11 meses

Are you, by any chance, a C/C++ dev?

Pxtlhá 11 meses

Python was established as a fun and sensible language that was usable and batteries-included at a time when everything else was either expensive or excruciating, and has been coasting in that success ever since. If you'd only coded in bash, C/C++, and late-'90s Java, Python was a revelation.

Lists comprehensions were added to the language after it was already established and popular and imho was the first sign that the emperor might be naked.

Python 3 was the death of it, imho, since it showed that improving the language was just too difficult.

ivanjermakovhá 11 meses

I think because it's forgiving and the first language for many people, so they just stick to easy they know.

doug_durhamhá 11 meses

It's my 18th language and I prefer it over the alternatives. If I need to write an app I'll use Swift. If I need to do some web work I'll switch to TypeScript. To get work done it's Python all the way.

ivanjermakovhá 11 meses

Agree. At some point grasping a new language takes hours and it makes sense to use it for tasks it excels at.

xigoihá 11 meses

It’s a good language for beginners and, unfortunately, many people think that learning more languages is hard and useless.

hnlmorghá 11 meses

That’s also precisely the reason why we have the clusterfuck that is the JavaScript ecosystem.

People complain that we can’t have nice things. But even when we do, enough developers will be lazy enough not to learn them anyway.

robmccollhá 11 meses

I'd argue it's because the web is the dominant platform for many applications and no other languages can offer a first class experience. if WASM had direct access to the DOM and web APIs and maybe a little more runtime support to lessen the bloat, I'd use something else.

hnlmorghá 11 meses

JavaScript has been a backend language long before the web was the dominant platform.

And one of the, admittedly many, reasons why web technologies like Electron and React Native exist is because it’s easier to find JavaScript developers vs Kotin, Qt or whatever.

So youre not wrong but you’re also downplaying the network effect that led to the web becoming dominant. And a part of that was because developers didn’t want to learn something new.

MonkeyClubhá 11 meses

> JavaScript has been a backend language long before the web was the dominant platform.

I don't think this holds.

JavaScript was created as a frontend language specifically for web browsers.

It wasn't until 2009 with the introduction of Node.js that JavaScript became a viable option for backend development.

The web was already the dominant platform by then.

hnlmorghá 11 meses

Actually I would say that was the turning point when the web started to become the dominant platform. Not the conclusion.

Before then it was Flash and native apps. Before then, smart phones weren’t common (eg the iPhone was just over a year old at that point) and the common idiom was to write native apps for Windows Mobile.

IE was still the dominant browser too, Firefox and WebKit were only starting to take over but we are still a long way from IE being displaced.

Electron didn’t exist so desktop app were still native and thus Linux was still a second class citizen.

It took roughly another roughly 2015 before the web because the dominant platform. But by 2005 you could already see the times were changing. It just took ages for technology to catch up. The advent of v8 and thus node and Electron, for that transition to “complete”.

dragonwriterhá 11 meses

> It wasn't until 2009 with the introduction of Node.js that JavaScript became a viable option for backend development.

JavaScript was used for backend development since the late 1990s via the Rhino engine (the backends wouldn't be pure JS generally but a mix of JS and Java; Rhino was a JS engine for the JVM with Java interop as a key feature.)

hnlmorghá 11 meses

Around that era, IIS also supported JS via ASP. Albeit typically people would write VBScript.

kmoserhá 11 meses

> Programs should be valid as they are typed.

That would be nice if devs always wrote code sequentially, i.e. left to right, one character at a time, one line at a time. But the reality is that we often jump around, filling in some things while leaving other things unfinished until we get back to them. Sometimes I'll write code that operates on a variable, then a minute later go back and declare that variable (perhaps assigning it a test value).

dkarlhá 11 meses

Code gets written once and read dozens or hundreds of times. Code that can be read sequentially is faster and easier to read than code that requires jumping around.

igouyhá 11 meses

And @kmoser did not say code should not be read sequentially.

jibalhá 11 meses

non sequitur

chrismorganhá 11 meses

That’s not quite what the article’s about, though it’s interesting too.

nottorphá 11 meses

Exactly. You only write code sequentially when it's a new file.

If i decide to add a new field to some class, i won't necessarily go to the class definition first, I'll probably write the code using that field because that's where the IDE was when i got the idea.

If I want to enhance some condition checking, i'll go through a phase where the piece of code isn't valid while I'm rearranging ifs and elses.

AnimalMuppethá 11 meses

> You only write code sequentially when it's a new file.

Often, not even then.

smoharehá 11 meses

astrangehá 11 meses

I agree with this, but it leads to another principle that too many languages violate - it shouldn't fail to compile just because you haven't finished writing it! It should fail in some other non-blocking way.

But some languages just won't let you do that, because they put in errors for missing returns or unused variables.

kmoserhá 11 meses

How is it supposed to compile if you've written something syntactically invalid? You can make the argument that the compiler could interpret it in (perhaps even arbitrary) valid way that constitutes a valid syntax, but that's almost worse: rather than being chided with compiler warnings, you now end up with code that compiles but executes indeterminately.

astrangehá 11 meses

Well I don't literally mean finished as in you haven't finished typing it. Although that's possible too - whitespace languages like Python tend to just work since they don't have end brackets, I suppose.

But you could have a compiled language where errors were limited to the function when possible, like by emitting asserts.

disconcisionhá 11 meses

there are approaches to ensure you always or almost always have syntactic validity, e.g. structured editing or error correcting parsing, though of course it's true that the more permissive the system is the more tortured some of the syntactic 'corrections' must be in extreme cases. the approach we're taking with http://hazel.org (which we approximate but don't fully succeed at yet) is: allow normal-ish typing, always correct the code enough to be ran/typechecked, but insert placeholders/decorations to telegraph the parse structure that we're using in case of errors or incompleteness.

conartist6há 11 meses

Hazel has embedding gaps but they are language and editor specific.

BABLR takes Hazel's idea and takes it about 18 steps further, potentially making embedding gaps a feature of every editor and programming language.

As long as solutions don't have a way to scale economically they'll be academic, but BABLR makes this not academic anymore.

disconcisionhá 11 meses

interesting!! is BABLR yours? is there a page that talks about your error-correcting/embedding-gaps approach? couldn't immediate find one in the docs. btw new version of tylr (hazel's core editing engine) is multi-language from the ground up, with a javascript grammar underway; new version is not yet online though

conartist6há 11 meses

It is! Our approach to error correcting is not to error correct. We instead help the user be highly effective while passing through incomplete states but not invalid ones.

Gaps are present in the embedded code representation, e.g. if · is a gap we would represent the result of parsing `console.log(·)` using a "gap tag" (written `<//>`) in a CSTML document that will look like this: https://gist.github.com/conartist6/75dc969b685bbf69c9fa9800c...

mackeyehá 11 meses

i saw hazel mentioned forever ago in an eecs 203 lecture and it sent me on a multi-year fp/type theory rabbit hole :) thanks for your work on it!

sorrythankshá 11 meses

Perhaps we are talking about programming with holes:

https://hazel.org/

jibalhá 11 meses

They didn't say "syntactically invalid".

PapstJL4Uhá 11 meses

> it shouldn't fail to compile just because you haven't finished writing it!

Syntactically invalid.

jibalhá 11 meses

I'm sorry that you don't understand the vast difference.

Terr_há 11 meses

I feel that's a use case for compiler flags that convert warnings to errors or vice-versa, where the same source-code can either be "good enough to experiment with" or "not ready for release" depending on the context.

jibalhá 11 meses

Zig is the worst that way.

Bolwinhá 11 meses

Which is silly because it could be among the best since it has line by line lime compilation.

I hope someone makes a fork that lets you disable those silly errors in debug mode

jibalhá 11 meses

Andy Kelley is a smart guy but being so damned opinionated and enforcing it in the language is a very bad idea. Zig is not a replacement for C if it forces people to code the way Kelley thinks they should code.

Forking a large and very active project like this is a mug's game.

PaulHoulehá 11 meses

It's definitely a minor annoyance for me that IDEs assume that I type things in a different order than I really do.

layer8há 11 meses

Also, mutual recursion. ;)

f1shyhá 11 meses

Yes. Seems like an arbitrary limitation to force it.

slowmovintargethá 11 meses

This is a "let 'im cook" instance.

Reading through the article, the author makes the argument for the philosophy of progressive disclosure. The last paragraph brings it together and it's a reasonable take:

> When you’ve typed text, the program is valid. When you’ve typed text.split(" "), the program is valid. When you’ve typed text.split(" ").map(word => word.length), the program is valid. Since the program is valid as you build it up, your editor is able to help you out. If you had a REPL, you could even see the result as you type your program out.

In the age of CoPilot and agent coders I'm not so sure how important the ergonomics still are, though I dare say coding an LSP would certainly make one happy with the argument.

layer8há 11 meses

Some IDEs provide code templates, where you type some abbreviation that expands into a corresponding code construct with placeholders, followed by having you fill out the placeholders (jumping from one to the next with Tab). The important part here is that the placeholders’ tab order doesn’t need to be from left to right, so in TFA’s example you could have an order like

    {3} for {2} in {1}

which would give you code completion for {3} based on the {1} and {2} that would be filled in first.

There is generally a trade-off between syntax that is nice to read vs. nice to type, and I’m a fan of having nice-to-read syntax out of the box (i.e. not requiring tool support) at the cost of having to use tooling to also make it nice to type.

This is not meant as an argument for the above for-in syntax, but as an argument that left-to-right typing isn’t a strict necessity.

aquafoxhá 11 meses

The consensus here seems to be that Python is missing a pipe operator. That was one of the things I quickly learned to appreciate when transitioning from Mathematica to R. It makes writing data science code, where the data are transformed by a series of different steps, so much more readable and intuitive.

I know that Python is used for many more things than just data science, so I'd love to hear if in these other contexts, a pipe would also make sense. Just trying to understand why the pipe hasn't made it into Python already.

atq2119há 11 meses

The next step after pipe operators would be reverse assignment statements to capture the results.

I find myself increasingly frustrated at seeing code like 'let foo = many lines of code'. Let me write something like 'many lines of code =: foo'.

teo_zerohá 11 meses

> reverse assignment statements to capture the results

Interesting idea! However, I'm not sure I would prefer

"Mix water, flour [...] and finally you'll get a pie"

to

"To make a pie: mix water, flour [...]"

redochrehá 11 meses

R does have a right assign operator, namely ->

It's use is discourages in most style guides. I do not use it in scripts, but I use it heavily in console/terminal workflows where I'm experimenting.

df |> filter() |> summarise() -> x

x |> mutate() -> y

plot(y)

levocardiahá 11 meses

The pipe operator in R (really, tidyverse R, which might as well be its own language) is one of its "killer apps" for me. Working with data is so, so pleasant and easy. I remember a textbook that showed two ways of "coding" a cookie recipe:

bake(divide(add(knead(mix(flour, water, sugar, butter)),eggs),12),450,12)

versus

mix(flour, water, sugar, butter) %>% knead() %>% add(eggs) %>% divide(12) %>% bake(temp=450, minutes=12)

So much easier!

yccs27há 11 meses

You'd never write that ugly one-liner. Just write the recipe imperatively:

    dough = mix(flour, water, sugar, butter)
    dough.knead()
    dough = dough.add(eggs)
    cookies = dough.divide(12)
    cookies = bake(temp=450, minutes=12)

Might be more verbose, but definitely readable.

aredoxhá 11 meses

Meh, it is really annoying to define all those brarely-used variables (and pray you don't have more than one kind of "dough" in your program... Otherwise you begin to have cookie_dough/CookieDough/cookie-dough/cookieDough and friends everywhere, and refactors begin to become annoying fast)

hagendaasalpinehá 11 meses

pandas and polars both have pipe methods available on dataframes. you can method chain to the same effect. it's considered best practise in pandas as you're hopefully not mutating the initial df

nxpnsvhá 11 meses

I don't know if

   result = (df
      .pipe(fun1, arg1=1)
      .pipe(fun2, arg2=2)
   )

is much less readable than

   result <- df |> 
      fun1(., arg1=1) |> 
      fun2(., arg2=2)

but I guess the R thing also works beyond dataframes which is pretty cool

itishappyhá 11 meses

The pipe operator uses what comes before as the first argument of the function. This means in R it would be:

    result <- df
      |> fun1(arg1=1)
      |> fun2(arg2=2)

Python doesn't have a pipe operator, but if it did it would have similar syntax:

    result = df
      |> fun1(arg1=1)
      |> fun2(arg2=2)

In existing Python, this might look something like:

    result = pipe(df, [
      (fun1, 1),
      (fun2, 2)
    ])

(Implementing `pipe` would be fun, but I'll leave it as an exercise for the reader.)

Edit: Realized my last example won't work with named arguments like you've given. You'd need a function for that, which start looking awful similar to what you've written:

    result = pipe(df, [
      step(fun1, arg1=1),
      step(fun2, arg2=2)
    ])

superbatfishhá 11 meses

>Implementing `pipe` would be fun, but I'll leave it as an exercise for the reader.

I like exercise:

https://gist.github.com/stuarteberg/6bcbe3feb7fba4dc2574a989...

nxpnsvhá 11 meses

Neat!

Izkatahá 11 meses

Python supports a syntax like your first example by implementing the appropriate magic method for the desired operator and starting the chain with that special object. For example, using just a single pipe: https://flexiple.com/python/python-pipeline-operator

The functions with extra arguments could be curried, or done ad-hoc like lambda v: fun1(v, arg1=1)

lsaferitehá 11 meses

I find this (hypothetical) syntax *very* elegant.

    result = df
      |> fun1(arg1=1)
      |> fun2(arg2=2)

nxpnsvhá 11 meses

Thanks!

mb7733há 11 meses

I haven't used R in forever, but is your `.` placeholder actually necessary? From my recollection of pipe operator the value being pipe piped is automatically as the first argument to the next function. That may have been a different implementation of a pipe operator though.

nxpnsvhá 11 meses

Probably not, I didn’t use R much during the last decade …

tekknikhá 11 meses

It seem like creative use of the map function and some iterators would provide the same functionality as a pipe does

srikuhá 11 meses

This is almost FP vs OOP religious war in disguise. Similar to vim-vs-emacs ... where op comes first in vim but selection comes first in emacs.

If you design something to "read like English", you'll likely get verb-first structure - as embodied in Lisp/Scheme. Other languages like German, Tamil use verbs at the end, which aligns well with OOP-like "noun first" syntax. (It is "water drink" word for word in Tamil but "drink water" in English.) So Forth reads better than Scheme if you tend to verbalize in Tamil. Perhaps why I feel comfy using vim than emacs.

Neither is particularly better or worse than the other and tools can be built appropriately. More so with language models these days.

dragonwriterhá 11 meses

> If you design something to "read like English", you'll likely get verb-first structure

If its imperative, sure. If its declarative and designed to read like English it will be subject first.

aredoxhá 11 meses

>where op comes first in vim

Doesn't Kakoune reverses that, and it makes so much more sense?

https://kakoune.org/why-kakoune/why-kakoune.html

jodrellblankhá 11 meses

Is it telling that the name is vi improved (noun verb) rather than improved vi (verb noun)?

[deleted]há 11 meses

cesarbhá 11 meses

> Other languages like German, Tamil use verbs at the end

Doesn't German have the main verb on the second position? (For a simple example, "I drink water" would be "Ich trinke Wasser")

srikuhá 11 meses

In that form yes, but the active "drink water" which is kind of what we'd code like "drink(water)" is "wasser trinken". ... but yeah human languages aren't straightjacketed easily.

aredoxhá 11 meses

Yeah, wrong one, but there are many languages out there where the verb is always at the end (Latin, Japanese I think).

andyferrishá 11 meses

Yeah I thought the German ambiguity was SVO vs OVS, “Fritz fished fish” vs “Fish, fished Fritz”..

nyeahhá 11 meses

Inviting native German speakers to comment. Of course we anglophone-only HN geniuses can answer cesarb's question brilliantly on our own. But perhaps as a little sidebar we could also get your 'opinion'. Thanks! /s

Zarathrusterhá 11 meses

On the other hand, Python does have "from some_library import child_module" which is always nice. In JS we get "import { asYetUnknownModule } from SomeLibrary" which is considerably less helpful.

throwitaway1123há 11 meses

Alternatively, with namespace imports in JS you can write [1]:

  import * as someLibrary from "some-library"
  someLibrary.someFunction()

Which works pretty well with IDE autocomplete in my experience.

[1] https://developer.mozilla.org/en-US/docs/Web/JavaScript/Refe...

Sammihá 11 meses

This is a non starter for anything you want to publish online, as it breaks tree shaking which will cause size bloat and therefore slow loading.

sebwshá 11 meses

I don't think this is true. The example from the esbuild docs uses `import * as lib from './lib.js'` in an example for tree shaking.

https://esbuild.github.io/api/#tree-shaking

Although there are associated issues but they may be specific to esbuild.

https://github.com/evanw/esbuild/issues/1420

throwitaway1123há 11 meses

Yes, as you pointed out, not only can bundlers tree shake namespace imports, but they're literally used in the esbuild documentation to demonstrate the concept of tree shaking.

The issue you linked to is referring to the case in which you import a namespace object and then re-export it. Bundlers like webpack and rollup (which vite uses in production) can tree shake this pattern as well, but esbuild struggles with it.

If you're using esbuild instead of this:

  import * as someLibrary from "some-library"
  someLibrary.someFunction()
  export { someLibrary }

You can still do this:

  import * as someLibrary from "some-library"
  someLibrary.someFunction()
  export * from "some-library"
  export { default as someLibraryDefault } from "some-library"

Tree shaking works as expected for downstream packages using esbuild in the second case, which someone else in the linked issue pointed out: https://github.com/evanw/esbuild/issues/1420#issuecomment-96...

imtringuedhá 11 meses

I never understood this obsession with the keyword "from"

Just do

    import SomeLibrary {
        asYetUnknownModule
    }

AdieuToLogichá 11 meses

It seems to me what the author desires is linguistic support for the Thrush combinator[0]. Another colloquial name for it is "the pipe operator."

Essentially, what this combinator does is allow expressing a nested invocation such as:

  f(g(h(x)))

To be instead:

  h(x) |> g |> f

For languages which support defining infix operators.

EDIT:

For languages which do not support defining infix operators, there is often a functor method named `andThen` which serves the same purpose. For example:

  h(x).andThen(g).andThen(f)

0 - https://leanpub.com/combinators/read#leanpub-auto-the-thrush

corankhá 11 meses

As I understand it this is precisely why in Haskell and OCaml standard libraries we get lots of things like

  map : (a -> b) -> a list -> b list

instead of

  map : a list -> (a -> b) -> b list

The main argument (data to be operated on) is positioned last, after the others which are more like parameters that tune the function. It's to allow chaining these things up left to right like Unix pipes:

  map f l |> filter g |> ...

AdieuToLogichá 11 meses

Great point.

The technique of currying method parameters such that the last one is the input to the operation also makes chaining Kleislis[0] quite nice, albeit using a bind operator (such as `>>=`) instead of the Thrush combinator operator (`|>`).

0 - https://bartoszmilewski.com/2014/12/23/kleisli-categories/

0xfffafaCrashhá 11 meses

I really want JS/TS to adopt the pipeline operator which has been in a coma in stage 2 after eternal bikeshedding at TC-39

https://github.com/tc39/proposal-pipeline-operator

It would make it possible to have far more code written in the way you’d want to write it

zzbzqhá 11 meses

SQL has this problem since it wants the SELECT list before the FROM/JOIN stuff.

I've seen some SQL-derived things that let you switch it. They should all let you switch it.

hawk_há 11 meses

I miss the F# pipe operator (https://learn.microsoft.com/en-us/dotnet/fsharp/language-ref...) in other languages. It's so natural to think of function transform pipelines. In other languages you have to keep going to the left and prepend function names, and to the right to add additional args, parens etc ...

mrbananagrabberhá 11 meses

I've had to migrate to mostly Python for my work, and this is the thing I miss the absolute most from R (and how it works so seamlessly with the tidyverse)

[deleted]há 11 meses

jraphhá 11 meses

You'll be able to use it in PHP 8.5 :-)

https://stitcher.io/blog/pipe-operator-in-php-85

lo_zamoyskihá 11 meses

n.b. pipe operators also exist in various forms in other languages. OCaml, Elixir, Clojure, Haskell...

hawk_há 11 meses

Oh yes I didn't mean F# is the only one. Just that the other ones I am likely to work with i.e. C++, Java and Python don't have it.

nxobjecthá 11 meses

A minor corollary to this is that, as the user types, IDEs should predictably try to make programs valid – e.g. via structured editing, balancing parens in Lisp like paredit, etc.

ivanjermakovhá 11 meses

This moves language design responsibility to the tool from the language itself. It might be okay to not hurt language elegance (e.g. lisp syntax), but in general I expect language to be convenient regardless of dev environment.

6yyyyyyhá 11 meses

Please no. I hate when the editor adds random shit I didn't type to the file.

haunterhá 11 meses

Mildly related: Non-English-based programming languages. There are some right to left options like Arabic, Hebrew, and Persian

https://en.wikipedia.org/wiki/Non-English-based_programming_...

bvrmnhá 11 meses

Author picked up a quite convenient example to show methods/lambda superiority.

I prefer list/set/dict comprehensions any day. It's more general, doesn't require to know a myriad of different methods (which could not exists for all collections, PHP and JS are especially bad with this) and easily extendable to nested loops.

Yes it could be `[for line in text.splitlines() if line: for word in line.split(): word.upper()]`. But it is what it is. BTW I bet rust variant would be quite elaborate.

lazarovitchhá 11 meses

I'm a big fan of Python syntax, but really comprehensions don't make any sense to me efficiency wise (even for readability). Python syntax would become perfect with filter() and map() :')

sn9há 11 meses

With judicious use of generators, and with itertools [0] when needed, they can be quite efficient for not much effort.

And these are flexible tools that you can take with you across projects.

[0] https://docs.python.org/3/library/itertools.html

instig007há 11 meses

> I prefer list/set/dict comprehensions any day. It's more general, doesn't require to know a myriad of different methods

It's the opposite, your knowledge of the standard set of folding algorithms (maps, filters, folds, traversals) is transferable almost verbatim across a wide range of languages: https://hoogletranslate.com/?q=map&type=by-algo

bvrmnhá 11 meses

maps and filters maybe. Other stuff is a wild west.

phkahlerhá 11 meses

Disagree. The first example the author seem to want something more like imperative programming, so the "loop" construct would come first. But then the assignment should come last. With the python syntax you get the thing you're assigning first - near the equals sign - and then where it is selected from and with any filtering criteria. It makes perfect sense. If you disagree that's fine, the whole post is an opinion piece.

adwnhá 11 meses

> the whole post is an opinion piece.

It's not. The author gives objective reasons why Python's syntax is inferior – namely, that it makes IDE support in the form of discoverability and auto-completion more difficult.

sgarlandhá 11 meses

This presupposes that the reader likes or even uses auto-complete. I do not, and there are many others like me.

adwnhá 11 meses

And I'm sure there are people who program in Notepad or nano. If you want to develop software like it's the 80s again, go ahead, the rest of us appreciates at least basic IDE support.

sgarlandhá 11 meses

Not liking auto-complete is a far cry from nano. I like syntax highlighting, I like on-the-fly type checking, I like linters, etc.

I use Neovim and tmux because I value snappy performance, and never having to leave the keyboard.

The reason I don’t like auto-complete is that it interrupts my thoughts. Once I’m typing code, I know what I want to do, and having things pop up is distracting. Before I’m typing, I’ll think about the problem, look at other code in the codebase, and/or read docs. None of that requires autocomplete, nor would it help me.

If you like autocomplete, great, use it, but don’t assume that it’s a binary choice between plaintext editing and Copilot.

zahlmanhá 11 meses

I program in Vim, after having tried multiple IDEs and finding them all to be annoying. In the few places where they were helpful, they only highlighted what I disliked about either the language or a particular library.

andsoitishá 11 meses

> Programs should be valid as they are typed.

Not possible. There are more keystrokes that result in invalid programs (you are still writing the code!!) than keystrokes that result in a valid program.

More seriously, I do think that one consideration is that code is read more often that written, so fluidity in reading and comprehension seem more important to me than “a program should be valid after each keystroke.

ivanjermakovhá 11 meses

Typing goes in the same directions as reading, so I expect many benefits to apply to both. But I agree that readability is much more important than writeability.

benrutterhá 11 meses

> While the Python code in the previous example is still readable, it gets worse as the complexity of the logic increases.

This bit is an aside in the article but I agree so much! List comprehensions in python are great for the simple and awful for the complex. I love map/reduce/filter because they can scale up in complexity without becoming an unreadable mess!

mklhá 11 meses

I agree with the main ideas of this article. Context-first left-to-right seems like it would be easier for LLMs to write and autocomplete well too.

This line, though, seems like it's using the wrong tools for the job:

  len(list(filter(lambda line: all([abs(x) >= 1 and abs(x) <= 3 for x in line]) and (all([x > 0 for x in line]) or all([x < 0 for x in line])), diffs)))

To me it's crying out for the lines to be NumPy arrays:

  sum(1 for line in diffs
      if ((np.abs(line) >= 1) & (np.abs(line) <= 3)).all()
         and ((line > 0).all() or (line < 0).all()))

There's no need to construct the list in memory if you're just counting, and dealing with whole lines at once is much nicer than going element by element. On top of that, this version is much more left-to-right.

or_am_ihá 11 meses

Yeah, the `numpy` version still looks relatively cryptic (like, "line > 0" is still fine, but the numpy arrays broadcasting rules can quickly get out of hand) compared to the author's Javascript example, or any decent collections API in a typed "enterprise" language like C#/Java/Scala for that matter. Here's my personal favorite, a Kotlin version:

  diffs.countIf { line -> 
      line.all { abs(it) in 1..3 } and ( 
          line.all { it > 0} or
          line.all { it < 0}
      )
  }

xigoihá 11 meses

While methods partially solve this problem, they cannot be used if you are not the author of the type. Languages with uniform function call syntax like Nim or D do this better.

frou_dhhá 11 meses

In 1990s-born scripting languages, it makes sense that there are plenty design choices that don't mesh well with static-analysis-driven autocompletion, because that was not at all part of the requirements for these languages at the time they were designed!

kragenhá 11 meses

It was a pretty big deal by the time list comprehensions were added to Python, though, in 02000: https://peps.python.org/pep-0202/

It's true that Python didn't cater to static analysis at all.

waffletowerhá 11 meses

So many engineers define their own narrow ergonomic values and then turn to the interwebs attempting to hammer their myopic belief into others as evangelical truth -- this reads as if the author believes there is a singular left-to-right process that a developer ought to adhere to. The author is oblivious to the non-linear compositional practices of other coders. It would be much more constructive to spend time creating specific tooling to aid your own process and then ask others if the values are also relevant to them. Not every developer embraces LSP, for example, as some are thwarted by its opinionated implementation. Not everyone is willing to give up local structure for auto-complete convenience.

rspencerhá 11 meses

I had a similar thought a few years ago with an Advent of Code problem for which my solution in python might have been

  max(map(sum, input_list.split(None)))

To decipher this the eye has to jump to the middle of the line, move rightwards, then to the left to see the "map" then move right again to see what we are mapping and then all the way to the beginning to find the "max".

The author would probably suggest rust's syntax* of

  values.iter().split(None).map(Iterator::sum).max().unwrap_or(0)

but I was learning q at the time so came up with the much clearer /s, right to left

  max((0^+)\)l

*: Though neither python nor rust have such a nice `.split(None)` built in.

papercranehá 11 meses

> Though neither python nor rust have such a nice `.split(None)` built in.

Sorry, I'm not sure I understand what `.split(None)` would do? My initial instinct is that would would return each character. i.e. `.chars()` in Rust or `list(s)` in Python.

bear8642há 11 meses

>Sorry, I'm not sure I understand what `.split(None)` would do?

Reading the docs [0] it seems `.split(None)` returns an array of the indivual characters without whitespace - so something like [c in list(s) if not whitespace(c)]

[0] https://docs.python.org/3.3/library/stdtypes.html?highlight=...

rspencerhá 11 meses

It was intended to split a list of `int|None` into its non-none stretches. Much like how `string.split('x')` splits a string by matching the character 'x'

papercranehá 11 meses

Gotcha! In python there is a `split_at` function for this in the more-itertools package, but I don't think there is a concise way to do it in the stdlib.

adreganhá 11 meses

Is the q solution equivalent? In doing a plus scan, isn't the last element always going to be the largest? To find the largest subarray sum, I would think you'd want to split into a matrix along the `null`s first and then plus reduction and then a max of those results.

Say what you will about clarity, but my mind sort of glossed over the intention in the python and rust code, focusing instead on the syntax, while the q code made me consider what was actually happening.

rspencerhá 11 meses

It is equivalent because it's not a plus-scan but a (0^+)-scan which resets every time it hits a null (there's a more in depth explanation here https://robertandrewspencer.com/aoc_2022_1/ )

Perhaps q did both force you to consider what was happening, and hide it from you...

adreganhá 11 meses

Thanks!

Though hopefully, once the idiom is learned, I'll be able to remember it :)

Curious as to why a scan \ rather than a reduction /?

Philpaxhá 11 meses

Rust doesn't have it built in, but it's part of itertools: https://docs.rs/itertools/latest/itertools/trait.Itertools.h...

This may eventually be upstreamed: https://github.com/rust-itertools/itertools/issues/1026

layer8há 11 meses

Honestly, I find using intermediate variables more readable than a long chain of function invocations where you have to keep track of intermediate results in your head:

    input_groups = input_list.split(None)
    group_sums = map(sum, input_groups)
    max_sum = max(group_sums)

This also gives you a slightly higher-level view on how the algorithm proceeds just by reading the variable names on the LHS.

matusphá 11 meses

The problem with this approach for me is that I don't know which variables are important outside of this snippet or outside of the next line. Is input_groups something I should keep in my head or is it just an intermediate result that can be discarded from my attention right away? The pipe-like solutions are nice because they are self-contained and you know that you only care about the final result and can abstract away the implementation.

I prefer python comprehensions for the same reason. I can tell that they are about crating a list or a dict and I don't need to parse a bunch of operations in a loop to come to the same conclusion.

thomasikzelfhá 11 meses

ReScript changed their api from data-last to data-first for this reason. Coupled with amazing type inference you will almost always receive correct autocompletions (that are type valid as well). It is a great experience.

It is sometimes still a problem when you define a function without reference to it (because the types are unnkown ofcourse). You will have to add types to it or call the function before implementing it.

There was also a great blogpost about it: https://www.javierchavarri.com/data-first-and-data-last-a-co...

kragenhá 11 meses

Based on Haskell do-notation, Firefox's unfortunately withdrawn array comprehensions, and C# LINQ, I've been thinking about this:

    [for b in c
     let d = f(b) 
     for e in g if h else m 
     where p(d, e): b, d, e]

as alternative syntax to Python's

    ((b, d, e)
     for b in c
     for d in [f(b)]
     for e in (g if h else m)
     if p(d, e))

This solves five problems in Python listcomp syntax:

1. The one this article is about, which is also a problem in SQL, as juancn points out.

2. The discontinuous scope problem: in Python

    [Ξ for x in Γ for y in Λ]

x is in scope in Ξ and Λ but obviously not Γ. This is confusing and inconsistent.

3. The ambiguity between conditional-expression ifs and listcomp-filtering trailing ifs, which Python solves by outlawing the former (unless you add extra parens). This is confusing when you get a syntax error on the else, but there is no non-confusing solution except using non-conflicting syntax.

4. let. In Python you can write `for d in [f(b)]` but this is inefficient and borders on obfuscated code.

5. Tuple parenthesization. If the elements generated by your iteration are tuples, as they very often are, Python needs parentheses: [(i, c) for i, c in enumerate(s) if c in s]. That's because `[i, c` looks like the beginning of a list whose first two items are i and c. Again, you could resolve these conflicting partial parses in different ways, but all of them are confusing.

sgarlandhá 11 meses

Is the entire complaint that autocomplete doesn’t work well? Have you tried learning your language?

ebonnafouxhá 11 meses

The way people code with Python is by using its large ecosystem, few people only use the standart library. No one knows all the API, the more discoverability there is, the better.

sgarlandhá 11 meses

I use stdlib whenever possible specifically because it’s huge, well-tested, and eliminates dependencies.

I don’t know all of its API, but I do read the docs periodically (not all of them, but I try to re-read modules I use a lot, and at least one that I don’t).

Someonehá 11 meses

It’s more about learning the language’s library, which typically is too large to remember in detail, than about learning the language, which typically is small enough for that.

sgarlandhá 11 meses

The complaints listed seem to focus on attributes / methods of a class. You can read Python’s docs, and see the methods available to a str type, for example.

To me, that’s learning the language. Learning its library would be more like knowing that the module `string` contains the function `capwords`, which can be used to - as the name suggests - capitalize (to title case) all words in a string. Hopefully, one would also know that the `str` class contains the method `upper`, so as not to confuse it with `string.capwords`.

chowellshá 11 meses

Autocomplete-oriented programming optimizes for writing code. I don't think that's a good route to go down. Autocomplete is good for spewing out a large volume of code, but is that what we want to encourage?

I'd much rather optimize for understanding code. Give me the freedom to order such that the most important ideas are up front, whatever the important details are. I'd much rather spend 3x the time writing code of it means I spend half the time understanding it every time I return to it in the future.

userbinatorhá 11 meses

Reading through this article only elicits a "WTF!?" from me.

Your editor can’t help you out as you write it.

You shouldn't need handholding when you're writing code. It seems like the whole premise of the author's argument is that you shouldn't learn anything about the language and programming should be reduced to choosing from an autocomplete menu and never thinking more than that. I've seen developers who (try to) work like this, and the quality of their work left much to be desired, to put it lightly.

From there you can eventually find fread, but you have no confidence that it was the best choice.

In C, you have to know ahead of time that fclose is a function that you’ll need to call once you’re done with the file.

It's called knowledge. With that sort of attitude, you're practically begging for AI to replace you.

No wonder people claim typing speed doesn't matter - they can barely think ahead one token, nevermind a statement or function, much less the whole design! Ideally your typing speed should become the bottleneck and you should be able to code "blind", without looking at the screen but merely outputting the code in your mind into the machine as fast as humanly possible. Instead we have barely-"developers" constantly chasing that next tiny dopamine hit of picking from an autocomplete menu. WTF!?

When this descent into mediocrity gets applauded, it's no surprise that so much "modern" software is the way it is.

teo_zerohá 11 meses

And we don't need navigation systems on our cars because we should know where we're going, right? ;)

Jokes apart, I think you're being too drastic. A good auto-complete is a nice feature, just like auto-indent, tab-complete, etc. Can it be abused? Sure. So what? Should we stop making it better for fear of abuse?

The reference to AI is far-fetched, too. We're talking about tools to help you with the syntax, not the semantic. I may forget if the function is called read, fread, or file_read, but I know what its effect is.

And finally, consider that if something is easier to parse for an editor, it most probably is for a human too. Not a rule, not working in 100% of cases, but usually exposing the user to the local context before the concept itself helps understanding.

jaharioshá 11 meses

> No wonder people claim typing speed doesn't matter - they can barely think ahead one token, nevermind a statement or function, much less the whole design! Ideally your typing speed should become the bottleneck and you should be able to code "blind", without looking at the screen but merely outputting the code in your mind into the machine as fast as humanly possible. Instead we have barely-"developers" constantly chasing that next tiny dopamine hit of picking from an autocomplete menu. WTF!?

If writing code is an automated process for you, you are also begging for AI to be replace you. Just a more advanced one than the code-monkey in the OP.

mpweiherhá 11 meses

This was one of the changes I made to Smalltalk syntax for Objective-S[1]:

The pipe "|" as an analog to the cascade ";", but sending to the result, like a normal pipe would. This avoids having to go back and add parentheses when you have a longer expression involving keyword sends.

For example navigating a nested set of dictionaries

    self classDefs at:className.
    (self classDefs at:className) at:which.
    ((self classDefs at:className) at:which) at:methodName.

vs.

    self classDefs at:className.
    self classDefs at:className | at:which.
    self classDefs at:className | at:which | at:methodName.

[1] https://objecttive.st

projektfuhá 11 meses

Smalltalk is pretty strictly left-right but that becomes one of its faults as well, as infix operators are all at equal precedence.

igouyhá 11 meses

And not "valid as they are typed" in fact not validated until we explicitly ask.

saghmhá 11 meses

This is a view I've expressed for years now, and usually people are pretty repetitive to it until I follow it up with "and that's a big part of why I find Ruby easier for me to write scripts in than Python". As someone who has never really worked much on production code in either of those languages, I'll never understand how Python managed to end up in the situation where it's installed enough to be the scripting language of choice when people want to reach for something other than bash. Sure, Ruby has its warts, but it's not like people are really delving into the messy parts of Python either for their scripts, and at least Ruby hasn't had a debacle major version breaking changes in the last decade.

TZubirihá 11 meses

"This is bad because your editor can’t help you autocomplete it as you write it."

No, you are bad because you use an editor with autocomplete.

And it's not even debatable, it's like playing bowling with rails, or riding a bycicle with training wheels. Sure you can argue that you are more efficient at bowling and riding a bike with those, but you are going to be arguing alone, and it's much better to realize that python is one of the best languages at the moment and therefore one of the best languages ever, instead of being a nobody and complaining about a lanugage because you are too encumbered by your own ego to realize that you are not as good a programmer as you thought.

Nothing wrong with being an amateur programmer or vibecoding or whatever, but if you come for the king you best not miss

Tweyhá 11 meses

This is the main reason I really like concatenative syntax for languages — this property is _enforced_ for programs (minus some delimited special cases, usually). It also neatly generalizes the special `self` argument so you can dispatch on the types of all the arguments.

necovekhá 11 meses

In Rust, for..in loops have the same problem: you don't know the type and shape of the thing you are iterating on before you get to the "in" part. "Luckily", it does not allow you to call any methods on the object before you do.

Similarly, Python list/dict/set comprehensions are a form of for-loop syntax sugar to easily create particular structure. One can use functools.maps to get exactly the same behavior of Rust example.

If this was an all important text input microoptimization, we'd all be doing everything with pure functions like Lisp: yet somehow, functional languages are not the most popular even if they provide the highest syntax consistency.

kragenhá 11 meses

That's an interesting idea: maybe instead of `for x, y in points: ...` (Python syntax) we should write `points do |x, y| ...` so the IDE has a maximum amount of type inference information available? That would also suggest writing variable declarations with the variable at the end, as in Forth or Levien's Io. 80 CONSTANT COLUMNS or `80 -> columns;`.

It doesn't look anything like Lisp, though.

podgorniyhá 11 meses

the same is my beef with typescript's imports:

import { MyClass } from './lib.ts'

First you need to type what to import and then from where leaving. There is no linear way of discovering import options from the source of imports without extra jumping in the code.

Alternatively linear completion, or (TIL https://en.wikipedia.org/wiki/Progressive_disclosure) would be possible for imports of shape like:

from './lib.ts' import { MyClass }

If course authors of the import syntax had good reasons (which I don't know) to build stuff that way they've built it.

chrismorganhá 11 meses

> This is much more pleasent. Since the program is always in a somehwat valid state as you type it, your editor is able to guide you towards the Pit of Success.

Although the subtitle was “programs should be valid as they are typed”, it’s weakened to “somewhat valid” at this point. And yes, it is valid enough that tooling can help, a lot of the time (but not all) at full capability. But there’s also interesting discussion to be had about environments where programs are valid as they are typed. Syntactically, especially, which requires (necessary but not sufficient) either eschewing delimition, or only inserting opening and closing delimiters together.

jonnycomputerhá 11 meses

    len(list(filter(lambda line: all([abs(x) >= 1 and abs(x) <= 3 for x in line]) and (all([x > 0 for x in line]) or all([x < 0 for x in line])), diffs)))

Well, point taken about the ordering, but there are many more legible ways to have written that code. Not everything has to be a one liner.

even:

    def f(diffs):
        cond = lambda line: all([1 <= abs(x) <= 3 for x in line]) and (
            all([x > 0 for x in line]) or all([x < 0 for x in line])
        )
        items = filter(cond, diffs)
        return len(list(items))

feelameehá 11 meses

> Suppose you have a FILE file and you want to get it’s contents. Ideally, you’d be able to type file. and see a list of every function that is primarily concerned with files. From there you could pick read and get on with your day.

> Instead, you must know that functions releated to FILE tend to start with f, and when you type f the best your editor can do is show you all functions ever written that start with an f

Why do you think that this is a problem of C? no one is stopping your tools from searching `fclose` by first parameter type when you wrote `file.`. Moreover, I know that CLion already do this.

pbiggarhá 11 meses

Incidentally, Darklang had this built into the language/editor combo from the start. You can see it in the examples on our youtube, maybe this one: https://www.youtube.com/watch?v=NQpBG9WkGus

To make a long story short, we added features for "incomplete" programs in the language and tools, so that your program was always valid and could not be invalid. It was a reasonable concept, and I think could have been a game changer if AI didn't first change the game.

pie_flavorhá 11 meses

C# has something very similar to Python 'comprehensions', but written left to right like TFA describes:

    from line in text.Split('\n') select line.Split(null)

Terr_há 11 meses

That's fine for doing algebra in pure functions, but what about destructive commands or interactive scenarios?

For example, using "rm" on the command line, or an SQL "delete". I would very much like those short programs to be invalid, until someone provides more detail about what should be destroyed in a way that is accident-resistant.

If I had my 'druthers, the left-to-right prefix of "delete from table" would be invalid, and it would require "where true" as a safety mechanism.

Tweyhá 11 meses

The solution suggested by the author, I assume, is `table.where(true).delete()` and `all_my_data.rm()`, which indeed has the property you describe.

[deleted]há 11 meses

xg15há 11 meses

I think the most absurd syntax goes to Python again.

Python offers an "extended" form of list comprehensions that lets you combine iteration over nested data structures.

The irony is that the extensions have a left-to-right order again, but because you have to awkwardly combine them with the rest of the clause that is still right-to-left, those comprehensions become completely unreadable unless you know exactly how they work.

E.g., consider a list of objects that themselves contain lists:

  toolboxes = [
    Box(tools=["hammer"]),
    Box(tools=["wrench", "screwdriver"])
  ]

To get a list of lists of tools, you can use the normal comprehension:

  toolsets = [b.tools for b in toolboxes]

But to get a single flattened list, you'd have to do:

  tools = [t for b in toolboxes for t in b.tools]

Where the "t for b" looks utterly mystifying until you realize the "for" clauses are parsed left-to-right as

  [t (for b in toolboxes) (for t in b.tools)]

while the "t" at the beginning is parsed right-to-left and is evaluated last.

jdranczewskihá 11 meses

I've taken to writing complex comprehensions like this over multiple lines (which I initially thought wasn't possible!). It's still a bit awkward, but the order of "fors" is the same as if one was writing nested for loops, which makes reasoning about it easier for me.

spapas82há 11 meses

The proper way to parse or construct nested list comprehensions as explained in pep 202 is to think like you're using normal for:

for a in b:

  for c in a:

    use(a,b,c)

This would be

[use(a,b,c) for a in b for c in a]

Everything stays the same except the "use" part that goes in the front (the rule also includes the filters - if).

lmmhá 11 meses

> The proper way to parse or construct nested list comprehensions as explained in pep 202 is to think like you're using normal for:

A syntax construct that requires you to think in a different syntax construct to understand it is not a good syntax construct.

> Everything stays the same except the "use" part that goes in the front (the rule also includes the filters - if).

Yeah, you consistently have to write the end first followed by the start and then the middle, it's just in most cases there's no middle so you naturally think you only have to flip the syntax rather than having to write it middle-ended like a US date.

chrismorganhá 11 meses

  len(list(filter(lambda line: all([abs(x) >= 1 and abs(x) <= 3 for x in line]) and (all([x > 0 for x in line]) or all([x < 0 for x in line])), diffs)))

This really isn’t fair on Python. Python isn’t very much not designed for this style of functional programming. Plus you haven’t broken lines where you could. Rewrite it as a list comprehension and add line breaks, and turn the inner list comprehensions into generator expressions (`all([…])` → `all(…)`), and change `abs(x) >= 1 and abs(x) <= 3` to `1 <= abs(x) <= 3` (thanks, Jtsummers), and it’s much better, though it still has the jumping around noted, and I do prefer the functional programming approach. I’m just saying the presentation isn’t fair on Python.

  len([line for line in diffs
       if all(1 <= abs(x) <= 3 for x in line)
       and (all(x > 0 for x in line) or all(x < 0 for x in line))])

(Aside: change the first line to `sum(1 for line in diffs` and drop the final `]`, and it will probably perform better.)

I also want to note, in the JS… Math.abs(x) instead of x.abs() (as seen in Rust).

And, because nerd sniping, two Rust implementations, one a direct port of the JS:

  diffs.iter().filter(|line| {
      line.iter().all(|x| x.abs() >= 1 && x.abs() <= 3) &&
      (line.iter().all(|x| x > 0) || line.iter().all(|x| x < 0))
  }).count()

(`x.abs() >= 1 && x.abs() <= 3` would be better as `(1..=3).contains(x.abs())` or `matches!(x.abs(), 1..=3)`.)

And one optimised to only do a single pass:

  diffs.iter().filter(|line| {
      let mut iter = line.iter();
      let range = match iter.next() {
          Some(-3..=-1) => -3..=-1,
          Some(1..=3) => 1..=3,
          Some(_) => return false,
          None => return true,
      };
      iter.all(|x| range.contains(x))
  }).count()

Jtsummershá 11 meses

  abs(x) >= 1 and abs(x) <= 3

Is also unidiomatic in Python.

  1 <= abs(x) <= 3

Means the same thing and tightens it up a bit, and reads better since it's indicating that you're testing if something is in a range more clearly.

EDIT: To add:

The filter, list construction, and len aren't needed either. It's just:

  sum(map(predicate, diffs)) # this counts the number of elements in diffs which satisfy predicate, map is lazy so no big memory overhead

Or alternatively:

  sum(predicate(diff) for diff in diffs)

The predicate is complex enough and used twice, so it warrants extraction to its own named function (or lambda assigned to a variable), but even if it were still embedded this form would be slightly clearer (along with adding the line breaks and removing the extra list generations):

  sum(map(lambda line: all(1 <= abs(x) <= 3 for x in line)
                       and (all(x > 0 for x in line) or all(x < 0 for x in line)),
          diffs))

chrismorganhá 11 meses

Ooh yes, thanks, I didn’t even think about that, I was too focused on the other parts. Much nicer, updated.

PaulHoulehá 11 meses

The author's argument is a strong argument against the way Lisp does it, at least for most code, as Lisp tends to put the verb to the left and nouns to the right so your IDE has no idea what nouns you are working with until you've picked the verb.

kazinatorhá 11 meses

Pretty much every functional language is verb-initial, as are function calls as well as statements in most mainstream languages.

Verb-final languages like PostScript and Forth are oddballs.

Embedded verbs are a thing of course, with the largest contribution coming from arithmetic expressions with infix operators, followed by certain common syntax like "else" being in the of an "if" statement, followed by things like these Python comprehensions and <action> if <condition> syntactic experiments and whatnot.

PaulHoulehá 11 meses

Right, his argument is in favor of the "fluent" syntax like

  table.where(...).select(...)

that is typical in many OO interfaces, though you sometimes see a pipe syntax which would be autocomplete friendly in languages like Clojure

https://clojuredocs.org/clojure.core/-%3E

or F#

https://stackoverflow.com/questions/12921197/why-does-the-pi...

montebicyclelohá 11 meses

> the Python code in the previous example is still readable

Yes, I agree with the author, list comprehensions are readible, and I'd add, practical.

> it gets worse as the complexity of the logic increases

    len(list(filter(lambda line: all([abs(x) >= 1 and abs(x) <= 3 for x in line]) and (all([x > 0 for x in line]) or all([x < 0 for x in line])), diffs)))

Ok, well this is something that someone would be unlikely to write... unless they wanted to make a contrived example to prove a point.

It would be written more like:

    result = sum(my_contrived_condition(x) for line in diffs)

See also the Google Python style guide, which says not to do the kind of thing in the contrived example above: https://google.github.io/styleguide/pyguide.html

(Surely in any language it's possible to write very bad confusing code, using some feature of the language...)

And note:

    x = [line.split() for line in text.splitlines()]

^- list comprehension is just a convenient shorthand for a `for loop`, i.e.:

    x = []
    for line in text.splitlines():
        x.append(line.split())

Just moving the `line.split()` to the front and removing the empty list creation and append.

zahlmanhá 11 meses

Why was this downvoted?

nromiunhá 11 meses

> let words_on_lines = text.lines().map(|line| line.split_whitespace());

But you still have to define line without autocomplete.

seniorsassycathá 11 meses

This can obviously be expanded to top to bottom programming, and there's a related principle of reorder / relocation.

If/else if fails the relocation principal across many languages, since the first must be if, and middles else if. Switch tends to pass.

Languages that don't allow trailing commas also fail

michaelfeathershá 11 meses

This is called point-free style in Haskell.

Sometimes it is called a fluent-interface in other languages.

bear8642há 11 meses

> Sometimes it is called a fluent-interface in other languages.

Where've you heard it called that? I've normally heard tacit programming

michaelfeathershá 11 meses

The developers of JMock, the original library for Java.

lock1há 11 meses

Or "point-less" style ;)

Could you elaborate? AFAIK tacit programming tend to be scrambling around composition, paren, and args which makes left-to-right reading significantly harder for function with arity greater than 2.

I find Java's method reference or Rust's namespace resolution + function as an argument much better than Haskell tacit-style for left-to-right reading.

mrkeenhá 11 meses

It's chaining functions with a dot, just like you do in typical OO languages.

When it's OO, it's a virtue that everyone loves - a "fluent interface".

When it's FP - oh it's unreadable! Why don't they just break every line out with an intermediate variable so I know what's going on!

scuff3dhá 11 meses

I don't think making your tools happy is a particularly valid reason to code in one style vs another.

xigoihá 11 meses

Left-to-right is also much easier to wrap your head around. Just imagine the data going on a conveyor belt with a bunch of machines instead of having to wrangle a nested tree.

scuff3dhá 11 meses

A not insignificant number of functional languages disagree. You often read functional code from the inside out, which basically means you're reading right to left as you move up function calls.

For the record though, "it's more readable" is a much better argument then "LSP mad"

Philpaxhá 11 meses

Right-to-left is equivalent to left-to-right in this regard: you're still reading in one linear direction, as opposed to Python, where you have to read inside-out and revisit later parts of the line to correctly understand previous parts of the line.

scuff3dhá 11 meses

Fair enough. And like I said, you're argument is certainly better than the article's.

I'm not really a fan of list comprehensions, I usually just use for loops. It does seem consistent with Pythons syntax though. For loop is `for item in items` and comprehensions have 'item for item in items'.

xigoihá 11 meses

Nim has a macro in the standard library that allows you to use the actual for loop syntax as a comprehension.

  let primeSquares = collect:
    for n in 1..100:
      if n.isPrime():
        n * n

mrkeenhá 11 meses

(x, y)f;

PaulHoulehá 11 meses

If your tools are happy they can make you happy.

omnicognatehá 11 meses

I have no tools because I've destroyed my tools with my tools.

sureglymophá 11 meses

It's nice if after typing `file.` you see what functions you can use. But what if there end up being too many options? What's next, a fuzzy finding search box for all possible functions? Contextually relevant ones based on the code you've already written?

hnlmorghá 11 meses

> But what if there end up being too many options?

That would suggest the file object needs to be refactored and split.

> What's next, a fuzzy finding search box for all possible functions? Contextually relevant ones based on the code you've already written?

IDEs already provide both those options.

sureglymophá 11 meses

I understand, I think I moreso wanted to hint that there may still be more room for exploration when it comes to things like this.

However, while I agree, I do want to challenge you to explain/show if and why this is the case (I know that you wrote "suggest"):

> That would suggest the file object needs to be refactored and split.

hnlmorghá 11 meses

I don’t want to overly generalise because there aren’t such things as absolutes with programming. But this was the thinking behind my comment:

If you have dozens of methods then that might be an indicator that your object is too large in size and thus consumes too much memory even for simple tasks.

It also might be a symptom that you’re trying to do too much with that object so perhaps some methods should be generalised, if possible.

Or maybe the object is already too generalised and what you actually need is a more specific object that inherits some of the initial objects design?

It might be that some of those methods should have been private, or even functions.

Ultimately, it could be an indicator that the object is either badly designed or has evolved to the point that it’s now ready for a refactor.

But it could also be the most optimal way to approach that problem too. In some situations. However it’s a good point to pause and reflect on whether the pain/reward threshold has been crossed.

mdemarehá 11 meses

One of the things I dislike about function notation is that in f(g(h())) execution order is right-to-left. I like OO partly because execution order is writing order ( h().g().f() )

In Clojure I love the threading macro which accomplishes the same: (-> (h) (g) (f))

dismalafhá 11 meses

In Haskell there's also dot (edit - my bad, not dot, pipe) syntax which allows composing functions left to right. I believe Nim also has it. Just as a few more examples.

projektfuhá 11 meses

f . g is still doing g first, then f, right? Haskell has pipelines in the Flow library.

https://hackage-content.haskell.org/package/flow-2.0.0.9/doc...

valcron1000há 11 meses

No need to import a third party library: you can use `Data.Function ((&))` for this:

    arg
     & f1
     & f2
     & f3

dismalafhá 11 meses

Ooops my bad. Been too long.

_kbhá 11 meses

I don’t think that’s correct. The dot operator is composition with the same semantics as when using normal math notation.

   (f . g) x

is equivalent to

   f (g x)

[deleted]há 11 meses

paradox460há 11 meses

Nim and other languages addressed that by making . akin to a pipe operator. It takes the left and sends it to the right, as the first argument

Naru41há 11 meses

I've often thought that if C just had a syntax like Go definding method, C would be much easier to write.

uint16_t (MyStruct* s) some_func() { .. }

uint16_t MyStruct_some_func(MyStruct* s) { .. }

(I guess I should just use C++... but C++ is overwhelmed in many ways)

slybothá 11 meses

Funny how the article has no reference to C++ but still linking "Falling Into The Pit of Success". Did we all get our daily dose of subliminal messages from rust?

[deleted]há 11 meses

baalimagohá 11 meses

You don't need to be bothered with minute details such as syntax for counting string length anymore, you just need to know what you want to do. I mention this since OP is bringing up LSP's as an argument for why certain language's design is suboptimal.

"Count length of string s" -> LLM -> correct syntax for string-count for any programming language. This is the perfect context-length for an LLM. But note that you don't "complete the line", you tell the LLM what you want to have done in full (very isolated) context, instead of having it guessing.

hansvmhá 11 meses

I don't think that meaningfully engages with the author's point.

If you already know how to compute `len` on some arbitrary syntax soup then the difference is just a minor annoyance where you have to jump back in your editor, add a function call and some punctuation, and jump back to where you were to add some closing punctuation. It's so fast you'd never bother with an LLM, so despite real and meaningful differences existing the LLM discussion point isn't relevant.

If you don't know how to compute `len` on some arbitrary syntax soup, I don't see how crafting an ideal prompt in a "full (very isolated) context" is ever faster than tab-completing things which look like "count" or "len."

ksherlockhá 11 meses

I don't know man. If a programmer can be replaced by a big old Tab key and a Homer Simpson keyboard bird, maybe LLM should take your job.

ekusiadadushá 11 meses

> If you aren’t familiar with Rust syntax, |argument| result is an anonymous function equivalent to function myfunction(argument) { return result; }.

> Here, your program is constructed left to right. The first time you type line is the declaration of the variable. As soon as you type line., your editor is able to suggest available methods.

Yeah, having LSP autocomplete here does feel nice.

But it also makes the code harder to scan than Python. Quick readability at a glance seems like the bigger win than just better autocomplete.

chrismorganhá 11 meses

> But it also makes the code harder to scan than Python. Quick readability at a glance seems like the bigger win than just better autocomplete.

It depends a lot on what you’re accustomed to. You get used to whichever style. Just like different languages use different sentence order: subject, object and verb appear in all possible orders in different languages, and their speakers get along just fine. There are some situations where one is clearly superior to the other, and vice versa.

`text.lines().map(|line| line.split_whitespace())` can be read loosely as “take text; take its lines; map each line, split it on whitespace”. Straightforward and matching execution flow.

`[line.split() for line in text.splitlines()]` doesn’t read so elegantly left-to-right, but so long as it’s small enough you spot the `for` token, realise you’re dealing with a list comprehension, and read it loosely from left to right as “we have a list made up of splitting each line, where lines come from text, split”. Execution-wise, you execute `text.splitlines()`, then `for line in`, then `line.split()`. It’s a bunch of left-to-rights embedded in a right-to-left. This has long been noted as a hazard of list comprehensions, especially the confusion you end up with with nested ones. Now you could quibble over my division of `for line in text.splitlines()` into two runs; but I think it’s fair. Consider how in Rust you get both `for line in text.split_lines() { … }` and `text.split_lines().for_each(|line| { … })`. Sometimes the for block reads better, sometimes .for_each() or .map() or whatever does. (But map(lambda …: …, …) never really does.)

Python was my preferred language from 2009–2013 and I still use it not infrequently, but Rust has been my preferred language ever since. I can say: I find the Rust version significantly easier to read, in this particular case. I think the fact there are two levels of split contributes to this.

xigoihá 11 meses

On the other hand, in Rust you often have to add something like

  .unwrap().unwrap().into::<&&&Vec<Box<&&&&&mut String>>>()

which kind of ruins the elegance :P

super_flankerhá 11 meses

It indeed doesn't look elegant, however I've never in my experience seen a usage like this. Do you have any reference where you might have seen this kind of usage.

xigoihá 11 meses

This is not meant to be taken literally, I was making fun of how Rust often requires a lot of punctuation and thinking about details of memory allocation.

super_flankerhá 11 meses

Gotcha, yeah you got me there with so many `&`. Good one.

Tuna-Fishhá 11 meses

Often, such as this time. :)

The Rust and Python code are not equivalent: The Python code instantly produces the nested list. Rust map does not iterate over the list given to it, it only produces an iterator that you then have to drain. To make them equivalent, you need to add collect calls.

... which adds more typing, because then collect needs to know the types you want to collect into. To make the Rust code fully equivalent with the Python version, you need to do:

    let words_on_lines: Vec<Vec<&str>> = text.lines().map(|line| line.split_whitespace().collect()).collect();

    // alternatively, you can put the type arguments into the .collect() calls:
    let words_on_lines = text.lines().map(|line| line.split_whitespace().collect::<Vec<_>>()).collect::<Vec<_>>();
    // which approaches the level of noise you expect from rust,
    // but stylistically I much prefer having the type declaration near the definition.

But of course this example also highlights Rust's power. Often (usually) you don't need to do that, and you can instead use the iterator directly, saving all the intermediate allocations. With Rust, I can often write the kind of code I do in python, but without a single heap allocation. Also, it doesn't bind you to a single collection type that ships with the language; if you want to, you can easily use something like a vec with a short vec optimization instead.

But it definitely does inherit Perl's mantle as executable line noise.

chrismorganhá 11 meses

> alternatively, you can put the type arguments into the .collect() calls:

Instead of writing out a turbofish both times, I’d probably leave the first unannotated and put `::Vec<Vec<_>>` on the second one.

Tuna-Fishhá 11 meses

Fair. I didn't even consider how that variant should be done, because whenever I find myself writing a turbofish I instantly ask myself, can I put this type in a definition somewhere instead?

kristopoloushá 11 meses

check out gleam, it's the best there is here.

Here's an example I found https://github.com/gleam-lang/example-todomvc/blob/main/src/...

cwilbyhá 11 meses

This is it right here. I love the Python ecosystem but if I can find a JS alternative I'm using that for ergonomics.

rf15há 11 meses

This explains why I'm so confused and troubled by python's list comprehension syntax, thanks!

[deleted]há 11 meses

bogdanoff_2há 11 meses

Ocaml has the pipe operator |> (kinda similar to pipe in Bash) for this purpose

bkovitzhá 11 meses

> Your editor can’t help you out as you write it.

Must not be a vim user.

marcelrhá 11 meses

this is a bad take

sometimes you want to think inside out

its the difference between imperative thinking and declarative

both are good, use each when applicable

advaelhá 11 meses

This is honestly why I love C++ ranges right now. The "pipe" syntax is a "left-to-right" of writing very powerful map/filter operations in contexts where I'd want a list comprehension but in a much more sensical (and for that matter customizable) order

henrydarkhá 11 meses

words_on_lines = [ret for line in text.splitlines() for ret in [line.split()]]

pech0rinhá 11 meses

I guess I’m so old that I remember time without autocomplete. Where programmers just knew what functions existed and how to use them. Usually by looking them up in a manual and then -gasp- remembering them. Languages shouldn’t be optimized for laziness or not using your brain.

“Shut up old man” yes yes okay.

aredoxhá 11 meses

This is still bad ergonomics.

Stair steps could be 450 mm high and work, but building codes make them 200 mm for a reason. And you are not "better" by saying that "I am fit enough to climb 450 mm steps, and you are all lazy for wanting stairs built to ergonomic standards".

melodyogonnahá 11 meses

Another thing to add to my list of superficial problems.

necovekhá 11 meses

Another point to this is that we should switch to writing the numbers in the right order too: 123 should be three-hundred-twenty-one.

This way, as soon as you type "1", it is truly one, you add a "2" and you know that's adding twenty...

IIRC Arabic gets this right!

/s

zahlmanhá 11 meses

You joke, but you highlight an important problem with the argument.

The idea is that we write `foo.bar`, where `foo` is in scope, exactly because `foo` is in scope. We don't write `bar from foo` or whatever, because it would be hard to reverse search the things that have `bar` in them.

But which is more likely: will `foo` be Liskov-substitutable for `bar`, or will other things that contain a `bar` have a `bar` of a Liskov-substitutable type?

Which is to say, the author is depending on a particularly idiosyncratic meaning of "valid".

That said, the problem the author describes at the beginning can be easily worked around, if you like this kind of workflow:

  words_on_lines = [st # 'str' is a plausible autocompletion
  words_on_lines = [str.sp # must be either 'split' or 'splitlines', unless 'str' is shadowed
  words_on_lines = [str.split(line) for # 'line in' can be suggested
  words_on_lines = [str.split(line) for line in text.splitlines()] # IDE can automatically check type and refactor the idiom

And it also isn't at all true that IDEs work left to right. They're constantly auto-typing the balancing close parentheses/braces/brackets for me and it's never clear to me what the intended flow is for moving past what was automatically typed, or whether manually typing that bracket explicitly (since I'm in my own "automatic typing") will double it up or not. There's nothing preventing the IDE from expecting you to type the clauses of the comprehension in a different order and I wouldn't at all be surprised to hear that someone has already implemented this.

teo_zerohá 11 meses

Haha. Except in Arabic numbers are written as in English.

necovekhá 11 meses

Right, but all the other letters are written right-to-left too :)

apps4datr2025há 11 meses

al2o3crhá 11 meses

taerichá 11 meses

I'm curious on how much of this is basically overcome by the new tools? As much as vibe coding annoys me, I can't argue against how good autocomplete from these LLMs can be.

nathan_comptonhá 11 meses

Very human of us to spend billions of dollars and tons of electricity to bang our programming languages into shape since sane syntax is slightly uncomfortable the first 10 minutes you work with it.

I believe there are some strongly typed stack based languages where you really always do have something very close to a syntactically correct program as you type. But now that LLMs exist to paper over our awful intuitions, we're stuck with bad syntax like python forever.

taerichá 11 meses

I'm honestly not sure how I feel on it, all told.

On one level, I do prefer my code to be readable left to right and top to bottom. This, typically, means the big "narrative" functions up top and any supporting functions will come after they were used. Ideally, you could read those as "details" after you have understood the overall flow.

On another level, though, it isn't like this is how most things are done. Yes, you want a general flow that makes sense in one direction through text. But this often has major compromises and is not the norm. Directly to programming, trying to make things context free is just not something that works in life.

Directly to this discussion, I'm just not sure how much I care about small context-free parts of the code?

Tangential to this discussion, I oddly hate comprehensions in python. I have yet to get where I can type those directly. And, though I'm asking if LLM tools are making this OBE, I don't use those myself. :(

mrguyoramahá 11 meses

So far any "autocomplete" from an LLM has only served to insanely disrupt my screen with fourtey lines of irrelevant nonesense that cannot be turned off (the "don't suggest multiline autocompletes" option does not prevent LLM autocomplete from doing so) and has only served to be less useful than non-LLM based autocompletes were, which I was massively impressed with, because it was hyperlocal and didn't pretend that the niche code I'm writing is probably identical to whatever google or microsoft writes internally.

I've had some minor success with claude, but enabling the AI plugin in intellij has literally made my experience worse, even without using any AI interactions.